Invacare 1514 User Manual
ANTI-THEFT DEVICE
Assembly, Installation and Operating Instructions
Model No. 1514
NOTE: Check all parts for shipping damage before
using. In case of damage, do NOT use. Contact the
Dealer/Carrier for further instructions.
SAFETY SUMMARY
The following recommendations are made for the
installation of the anti-theft device:
WARNING
DO NOT assemble or use this equipment without first reading and understanding this instruction sheet. If you are unable to understand the
warnings, cautions or instructions, contact a
healthcare professional, dealer or technical
personnel before attempting to install this
equipment - otherwise, injury or damage may
occur.
NEVER maneuver an occupied wheelchair by
using
ous injury or damage can occur. ALWAYS use
the handles of the wheelchair when maneuvering an occupied wheelchair.
ANY part of the anti-theft device. Seri-
INSTALLING THE ANTI-THEFT
DEVICE (FIGURE 1)
1. Remove the upper four (4) phillips screws and
washers that secure the back upholstery to the
back canes.
NOTE: Phillips screws and washers will be reused.
2. Position the anti-theft device brackets with the
back upholstery screw holes.
3. Install the phillips screws through the washers,
anti-theft device brackets, back upholstery and
into the back canes.
4. T ighten the four (4) phillip s screws securely.
Anti-Theft
Device
Phillips Screws
Back Cane
and Washers
This kit contains the following:
DESCRIPTION QT Y
Anti-Theft Bar 1
Instruction Sheet 1
Invacare Corporation www.invacare.com
USA Canada
One Invacare Way 5970 Chedworth Way Invacare is a registered trademark of Invacare Corporation.
Elyria, Ohio USA Mississauga, Ontario ©
44036-2125 L5R 3T9, Canada
800-333-6900 905-890-8838 Form No. 84-63 Part No. 1003365 Rev D (1) 1/00
Back Upholstery
Anti-Theft
Device Bracket
FIGURE 1 - INSTALLING THE ANTI-THEFT DE-
VICE
1999 Invacare Corporation
Loading...