Decision Data
Series
Wedge Interface
Guide
Intermec® Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. technical and service support: 1-800-755-5505
U.S. media supplies ordering information: 1-800-227-9947
Canadian technical and service support: 1-800-688-7043
Canadian media supplies ordering information: 1-800-268-6936
Outside U.S. and Canada: Contact your local Intermec service
supplier.
The information contained herein is proprietary and is provided
solely for the purpose of allowing customers to operate and/or
service Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written
permission of Intermec.
Information and specifications in this manual are subject to change
without notice.
© 1995 by Intermec Corporation
All Rights Reserved
The word Intermec, the Intermec logo, and Virtual Wedge are
trademarks of Intermec Corporation.
Throughout this manual, trademarked names may be used. Rather
than put a trademark (™) symbol in every occurrence of a
trademarked name, we state that we are using the names only in an
editorial fashion, and to the benefit of the trademark owner, with
no intention of infringement.
Decision Data Series
This Wedge Interface (WIF) Guide lists the cables, power supply,
and keyboard mapping tables for your workstation, and describes
how to configure the reader for your workstation and keyboard.
Decision Data Series
Wedge Interface Guide
This guide covers these workstations:
Decision Data 3596 HP 700/32
Decision Data 3597 HP 700/43
Decision Data 3697 HP 700/44
Decision Data 3776 HP 700/60
Decision Data 3777 HP 700/92
HP 700/94
HP 700/96
HP 700/98
Cables
Use the two cables supplied with this WIF kit to connect the
reader to your workstation and keyboard, as shown in your
Wedge Reader User’s Manual. To order a replacement cable, use
these part numbers:
• Wedge interface kit - Part No. 054287
• Keyboard cable - Part No. 054286
• Terminal cable - Part No. 054285
3
Wedge Interface Guide
Power Supply
The reader might require external power, depending on the
type of workstation you use:
Workstation Power supply and jumper setting
Decision Data 3776
Decision Data 3777
Decision Data 3697
HP 700/43
HP 700/92
HP 700/94
HP 700/96
The reader does not require an external power
supply to work with these workstations. Set the
PCB jumper to connect pins 1 and 2 on the
reader’s rear panel.
Workstation Power supply and jumper setting
Decision Data 3596
Decision Data 3597
HP 700/32
HP 700/44
HP 700/60
HP 700/98
The reader requires an external power supply to
work with these workstations. Set the PCB
jumper to connect pins 2 and 3 on the reader’s
rear panel.
Note: If you use an external power supply for the reader, you must
plug in the power supply before switching on the workstation. If you
do not, the reader will lock up.
4
Decision Data Series
Decision Data 3596, 3597, 3697
83-Key Keyboard
Decision Data 3596, 3597, 3697
102-Key Keyboard
Decision Data 3596, 3597, 3697
122-Key Keyboard
Decision Data 3776, 3777
102-Key Keyboard
Decision Data 3776, 3777
122-Key Keyboard
Configuring the Reader
Scan the appropriate label below to configure the reader for
your workstation. The reader should emit one low beep
followed by four low beeps, indicating that the reader has
successfully stored the configuration and is ready to read labels.
If the reader emits a different beep sequence, refer to the Wedge
Reader User’s Manual, Section 2, for beeper identification.
To set workstation
configuration to: Scan this label:
*$+TA173*
*$+TA173*
*$+TA222*
*$+TA222*
*$+TA172*
*$+TA172*
*$+TA460*
*$+TA460*
*$+TA461*
*$+TA461*
5
Wedge Interface Guide
HP 700/32
ANSI US Keyboard
HP 700/32
ANSI French Keyboard
HP 700/32
ANSI German Keyboard
HP 700/32
ANSI Italian Keyboard
HP 700/32
ANSI Spanish Keyboard
HP 700/43
US Keyboard
HP 700/43
Canadian/French Canadian
Keyboard
To set workstation
configuration to: Scan this label:
*$+TA413*
*$+TA413*
*$+TA414*
*$+TA414*
*$+TA415*
*$+TA415*
*$+TA416*
*$+TA416*
*$+TA417*
*$+TA417*
*$+TA298*
*$+TA298*
*$+TA328*
*$+TA328*
6
Decision Data Series
HP 700/43
Danish Keyboard
HP 700/43
Dutch Keyboard
HP 700/43
Finnish/Swedish Keyboard
HP 700/43
Flemish/French Keyboard
HP 700/43
German Keyboard
HP 700/43
Latin American Keyboard
HP 700/43
Norwegian Keyboard
To set workstation
configuration to: Scan this label:
*$+TA336*
*$+TA336*
*$+TA342*
*$+TA342*
*$+TA335*
*$+TA335*
*$+TA334*
*$+TA334*
*$+TA329*
*$+TA329*
*$+TA331*
*$+TA331*
*$+TA332*
*$+TA332*
7
Wedge Interface Guide
HP 700/43
Spanish Keyboard
HP 700/43
Swiss (French/German)
Keyboard
HP 700/43
UK Keyboard
HP 700/44
US Keyboard
HP 700/44
French Keyboard
HP 700/44
German Keyboard
HP 700/44
Italian Keyboard
To set workstation
configuration to: Scan this label:
*$+TA340*
*$+TA340*
*$+TA337*
*$+TA337*
*$+TA333*
*$+TA333*
*$+TA423*
*$+TA423*
*$+TA424*
*$+TA424*
*$+TA425*
*$+TA425*
*$+TA426*
*$+TA426*
8
Decision Data Series
HP 700/44
Spanish Keyboard
HP 700/60
ANSI US Keyboard
HP 700/60
PC US Keyboard
HP 700/60
ANSI French Keyboard
HP 700/60
PC French Keyboard
HP 700/60
ANSI German Keyboard
HP 700/60
PC German Keyboard
To set workstation
configuration to: Scan this label:
*$+TA427*
*$+TA427*
*$+TA418*
*$+TA418*
*$+TA462*
*$+TA462*
*$+TA419*
*$+TA419*
*$+TA463*
*$+TA463*
*$+TA420*
*$+TA420*
*$+TA464*
*$+TA464*
9
Wedge Interface Guide
HP 700/60
ANSI Italian Keyboard
HP 700/60
PC Italian Keyboard
HP 700/60
ANSI Spanish Keyboard
HP 700/60
PC Spanish Keyboard
HP 700/92, 700/94, 700/96, 700/98
US Keyboard
HP 700/92, 700/94, 700/98
Canadian/French Canadian
Keyboard
HP 700/92, 700/94, 700/98
Danish/Norwegian Keyboard
To set workstation
configuration to: Scan this label:
*$+TA421*
*$+TA421*
*$+TA465*
*$+TA465*
*$+TA422*
*$+TA422*
*$+TA466*
*$+TA466*
*$+TA303*
*$+TA303*
*$+TA343*
*$+TA343*
*$+TA347*
*$+TA347*
10
Decision Data Series
HP 700/92, 700/94, 700/98
Dutch Keyboard
HP 700/92, 700/94, 700/98
Finnish/UK Keyboard
HP 700/92, 700/94, 700/96, 700/98
Flemish/French Keyboard
HP 700/92, 700/94, 700/98
German Keyboard
HP 700/92, 700/94, 700/98
Italian Keyboard
HP 700/92, 700/94, 700/98
Latin American Keyboard
HP 700/92, 700/94, 700/96, 700/98
Spanish Keyboard
To set workstation
configuration to: Scan this label:
*$+TA358*
*$+TA358*
*$+TA348*
*$+TA348*
*$+TA349*
*$+TA349*
*$+TA344*
*$+TA344*
*$+TA352*
*$+TA352*
*$+TA346*
*$+TA346*
*$+TA356*
*$+TA356*
11
Wedge Interface Guide
HP 700/92, 700/94, 700/98
Swedish Keyboard
HP 700/92, 700/94, 700/98
Swiss (French/German) Keyboard
HP 700/96
German Keyboard
HP 700/96
Italian Keyboard
To set workstation
configuration to: Scan this label:
*$+TA355*
*$+TA355*
*$+TA353*
*$+TA353*
*$+TA499*
*$+TA499*
*$+TA500*
*$+TA500*
12
Decision Data Series
Keyboard Equivalent Tables
Several HP workstations use special keyboard mapping:
• HP 700/43, 700/92, 700/96, and 700/98 use the map on the
next page.
• HP 700/32 uses standard ASCII mapping (Table A-3, Wedge
Reader User’s Manual).
• HP 700/44 uses standard PC mapping (Table A-1, Wedge
Reader User’s Manual).
• With an ANSI keyboard, HP 700/60 uses standard ASCII
mapping (Table A-3, Wedge Reader User’s Manual). With a PC
keyboard, HP 700/60 uses standard PC mapping (Table A-1
Wedge Reader User's Manual).
Note: Alphanumeric characters (Aa to Zz, and 0 to 9) are not listed in
this table because the workstation’s keystrokes match the ASCII
characters.
13
Wedge Interface Guide
ASCII
ASCII
Character
Keystroke
Character
Keystroke
HP 700/43, HP 700/92, 700/96, and HP 700/98 Keyboard Mapping
NUL + Num SP Spacebar
SOH Left Enter ! !
STX Left Extend Char/ "(quote) "(quote)
Scroll Lock
ETX - Num # #
EOT Ins Char $ $
ENQ Del Char % %
ACK Ins Line & &
BEL Del Line '(apostrophe) '(apostrophe)
BS Scroll Down ( (
HT
LF Caps Lock * *
VT
FF Scroll Up , (comma) , (comma)
CR
SO Ctrl . (period) . (period)
SI
DLE F1 : :
DC1 F2 ; ;
DC2 F3 < <
DC3 F4 = =
DC4 F5 > >
NAK F6 ? ?
SYN F7 @ @
ETB F8 [ [
CAN F9/Menu \ \
EM F10/System ] ]
SUB Break ^ ^
ESC Esc _ (underline) _ (underline)
FS Prev ` (accent) ` (accent)
GS Next {
RS Clear Line |
US Clear Display }
DEL
→⎪ (tab)
⎪← (tab)/Funct
↵ (Return)
↑ (shift)
← (bksp del)
))
++
-(dash) - (dash)
//
↑
↓
←
~
→
14
blank
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
Decision Data Series Wedge Interface Guide
*054288-003*
P/N 054288-003
Loading...