Interlogix NX-592E, NX-592E-GSM Installation Manual
NX-592E-GSM Wireless
Gateway Installation Manual
P/N 466-2204 • REV F • January 2011
Copyright Copyright © 2011 Interlogix, a UTC Fire & Security Company. All rights reserved.
r
This document may not be copied in whole or in part or otherwise reproduced without
prior written consent from UTC Fire & Security except where specifically permitted
under US and international copyright law.
Document number 466-2204E. January 2011
Disclaime
The information in this document is subject to change without notice. UTC Fire &
Security assumes no responsibility for inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a
consequence, directly or indirectly, of the use or application of any of the contents of
this document. For the latest documentation, contact your local supplier or visit us
online at www.utcfireandsecurity.com.
This pu
blication may contain examples of screen captures and reports used in daily
operations. Examples may include fictitious names of individuals and companies. Any
similarity to names and addresses of actual businesses or persons is entirely
coincidental.
Trademarks and
patents
Other trade names used in this document may be trademarks or registered
trademarks of the manufacturers or vendors of the respective products.
Intended use Use this product only for the purpose it was designed for; refer to the data sheet and
user documentation. For the latest product information, contact your local supplier or
visit us online at www.utcfireandsecurity.com.
ompliance This equipment has been tested and found to comply with the limits for a Class B
FCC c
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Contact information For contact information, see www.utcfireandsecurity.com. or www.interlogix.com
Technical support Toll-free: 888.437.3287 in the US including Alaska, Hawaii, Puerto Rico, and
Canada. Outside the tool-free area, contact your dealer.
Content
Preface ..................................................................................
3
Conventions used in this document ................................................3
Safety terms and symbols...............................................................3
Product summary..........................................................................5
Components.................................................................................... 5
Before installation.........................................................................7
Create a new account.....................................................................7
Programming the number of zones.................................................8
Installation.....................................................................................9
Installation guidelines......................................................................9
Tools and supplies needed ............................................................. 9
Mounting locations........................................................................10
Mounting....................................................................................... 10
Wiring connections........................................................................11
Case tamper switch installation ..................................................... 12
Power up.......................................................................................12
Enrolling the module .....................................................................12
Programming using the keypad.....................................................13
Status LEDs..................................................................................14
NX-592E-
Specifications..............................................................................15
Troubleshooting..........................................................................17
Contacting us .....................................................................
17
Online resources...........................................................................17
Creating a new subscriber account........................................... 19
Customer information.................................................................20
System operation from Alarm.com................................................20
FCC notice....................................................................................20
GSM Wireless Gateway Installation Manual i
Preface
This is the NX-592E-GSM Wireless Gateway Installation Manual. This document
includes an overview of the product and detailed instructions explaining:
• how to install the unit; and
• how to program the unit.
There is also information describing how to contact technical support if you have
questions or concerns.
To use this document effectively, you should have the following minimum
qualifications:
• a basic knowledge of NetworX panels; and
• a basic knowledge of electrical wiring and low-voltage electrical connections.
Read these instructions and all ancillary documentation entirely before installing
or operating this product. The most current versions of this and related
documentation may be found on our website. Refer to “Online resources” on
page 17 for instructions on accessing our online publication library.
Note: A qualified service person, complying with all applicable codes, should
perform all required hardware installation.
Conventions used in this document
The following conventions are used in this document:
Bold Menu items and button.
Italic
Blue (Electronic version.) Hyperlinks to cross-references, related topics, and URL
e
Emphasis of an instruction or point; special terms.
File names, path names, windows, panes, tabs, fields, variables, and other GUI
elements.
Titles of books and various documents.
addresses.
Text that displays on the computer screen. Monospac
Programming or coding sequences.
Safety terms and symbols
These terms may appear in this manual:
Caution: Cautions identify conditions or practices that may result in damage to
the equipment or other property.
3
NX-592E-GSM Wireless Gateway Installation Manual
WARNING: Warning identify conditions or practices that could result in
equipment damage or serious personal injury.
NX-592E-
GSM Wireless Gateway Installation Manual 4
Product summary
The NX-592E-GSM Wireless Gateway (Figure 1 below) allows NetworX owners
to control and monitor their system status from the Alarm.com website. Through
a wireless, two-way paging network, your customer has limited controls on such
features as security, notifications, history, and authentication (see “System
operation from Alarm.com” on page 20 for further details)
Figure 1: NX-592E-GSM
Using the wireless paging network, NetworX owners may also be notified of
system events by e-mail, pager, or phone.
Components
The wireless module interfaces with the NetworX panel data bus and is powered
by the panel or an auxiliary 12 VDC power supply. Status LEDs indicate bus and
paging network communications. Figure 2 on page 6 shows the main module
component
s and Table 1 on page 6 describes them.
5
NX-592E-GSM Wireless Gateway Installation Manual
Loading...