Intrusion
Wireless
GSM & CDMA
Modules
For use with NetworX Systems
Overview
New cellular modules enable the NetworX series of security panels
to communicate signals wirelessly over either 3G HSPA or CDMA
cellular networks. This provides users with Alarm.com’s secure
wireless signaling and convenient functionality including real-time
event notification, Web-based remote monitoring and other home
system control capabilities.
The digital wireless communication also enables secure alarm
reporting to any central station via SIA or Contact ID, regardless of
whether a phone line is installed at the system location. Users can
remotely monitor and control their security system via smartphone,
tablet or via the Alarm.com website. Features include viewing
system status and history, arming and disarming the system, setting
up user codes, and creating customized email and text message
notifications for any type of alarm or non-alarm activity at the
property. Additionally, using the Z-Wave
the control of Z-Wave class devices such as lighting and thermostats.
The modules interface with the NetworX panel data bus and
are powered by the panel. Status LEDs on the module allow for
cellular signal strength checking, as well as troubleshooting during
installation. The cellular module can be used as the primary means
of communication or as a backup to a landline phone connection.
Each NetworX panel supports a maximum of one wireless module.
For added peace of mind, an optional tamper detection switch is
available that signals when the module cover is removed.
®
enabled modems enables
Standar d F e atur eS
• Cellular coverage of greater than 95% of North America’s population
• Remote monitoring and control for convenient system access
system anytime, anywhere
• Remote programming via AirFx
without expensive “truck rolls”
• Z-wave class modems control lighting, thermostat and more
• Two-way Voice over cellular allows homeowners to speak directly
to a central station during emergencies (standard on all models)
• Cellular module can be located up to 90 ft. (27.4m) from
the main control panel
• LED status lights display signal strength and simplify troubleshooting
™
toolkit troubleshoots issues
interlogix.com
North America
Wireless
T 855-286-8889
GSM & CDMA
Modules
For use with NetworX Systems
Specifications
Compatibility
Power requirements
Power/data bu s One three-wire NetworX power/communication data bus
Cellular network 1xRTT CDMA Verizon
LED Indicators
Dimensions (H x W x D) 5.25 x 4.125 x 1 in. (133 x 105 x 25 mm)
Case material High-impact, ABS plastic, Belgian gray
Operating temperature 32 to 120ºF (0 to 49ºC)
Storage temperature -30 to 140ºF (-34 to 60ºC)
Humidity 90% relative humidity
Listings FCC Part 15, IC
NetworX panels: NX V2 4, 6, 8 and 8E. (Note: certain older V1 NX4, 6 and 8 may not be
fully supported)
12 V nominal, 65 mA (continuous) 1600mA (instantaneous peaks) maximum
(from panel or auxiliary power supply)
®
; 3G HSPA AT&T™ , T-Mobile® or Rogers
One module/panel communication status LED, one module power LED, one
automation LED, three wireless communication status LEDs, and 4 GSM status LEDs
Asia
T 852-2907-8108
Australia
T 61-3-9239-1200
Europe
T 32-2-725-11-20
Latin America
T 561-998-6114
Ordering Information
NX-592E-GSM-ZX-AT NetworX Cellular Module, Alarm.com HSPA 3G GSM w/Z-Wave®, AT&T
NX-592E-GSM-ZX-RG
NX-592E-GSM-ZX-TM NetworX Cellular Module, Alarm.com HSPA 3G GSM w/Z-Wave, T-Mobile
NX-592E-CDMA-ZX-VZ NetworX Cellular Module, Alarm.com 1xRTT CDMA w/Z-Wave, Verizon
NetworX Cellular Module, Alarm.com HSPA 3G GSM w/Z-Wave, Rogers
(Canada Use Only)
Z-Wa ve® is a registered US tr ademar k of Zensys A /S.
Compli es with FCC a nd Indust ry Canada regulations.
interlogix.com
Specifications subject to change without notice.
© 2013 Interlogix.
All rights reser ved.
Interlogix is par t of UTC Climate, Controls & Security,
a unit of United Technologies Corporation.
307-3698 2013/07 (75332)