Interlogix NX-590NE Specsheet

Product Data Sheet

NX-590NE

TCP/IP Internet/Intranet interface module

Outstanding features

The NX-590NE module can send events to two IP addresses
for dual, split or backup reporting. Events may also be sent to
two e-mail addresses. The control panels can also be
configured for dial or cellular backup should network
communication fail.

Triple-DES encryption is used to protect data from being
compromised. To further enhance network security, a dynamic
key generation is employed with a new 24-Bytes random
number generated for every event.

The NX-590NE module also offfers the choice of static IP,
where the IP addresses are fixed and assigned by IS
department or DHCP, where a pool of IP addresses is assigned
by a server to units on the network and IP addresses can and
do change. Either way all functions are programmable via
keypad or upload/download software DL900.

Standard Features

E Up to 10.000 NX-590NE's can be monitored on the

Osborne-Hoffman network receiver

E Uses SIA or Contact ID reporting format
E User selectable polling time for full supervision
E Low current draw of 90mA in standby and 120mA during

communication at 12 VDC

E Small bandwith used with typical message length of 20

bytes

E Upload / Download connectivity
E PremisesConnect and home automation protocol support

NX-590NE

TCP/IP Internet/Intranet interface module

Specifications

Operating power (nominal)

Current consumption

- min. (stand-by) 82 mA

- max. (communication) 120mA

Operating temperature 0° to 50°C

Dimensions 152 x 83 x 25 mm

Weight 454g

13.8 Vdc via bus

Ordering Information

Part No. Description

NX-590NE

TCP/IP Internet/Intranet interface module

As a company of innovation, UTC Fire & Security reserves the right to change product
specifications without notice. For the latest product specifications, visit UTC Fire & Security
online or contact your sales representative.
NX-590NE-2015-05-21 14:42:48 Released :29-AUG-11