Interlogix NX-588E Specsheet
Intrusion
NetworX Quik Link
Direct Connect
Module
Alarm panel confi guration storage for
programming NetworX panels
OVERVIEW
The NetworX Quik Link Direct Connect Module makes programming
NetworX alarm panels fast and easy. This USB Flash Programmer
allows select modules, as well as NetworX V2 panels to have their
fi rmware fl ashed in the fi eld. The module works with any NetworX
panel and can be programmed using DL900 software or via the
installer program mode.
The NetworX Quik Link Direct Connect Module gives installers
more fl exibility because it stores up to four panel confi guration fi les.
Installers can move from one installation to the next with consistency
of programming. The module makes programming panels simple and
helps eliminate costly programming errors.
Specifi cations
Compatibility Any NetworX panel
Requirements
Adapter cable w/clips
Dimensions
(W x H x D)
USB confi guration, fl ash fi les, NXProg software
upgrade, DL900 upload/download software,
available at interlogix.com
Included
1.625 x 3.75 x 0.875 in.
STANDARD FEATURES
• Connects to any NetworX control panel
• Allows direct connection between PC and alarm panel using USB
• Stores up to four alarm panel confi gurations
• Ability to upgrade fi rmware on NetworX V2 panels and expander
modules’ Flash memory (NX-548, NX-148E [RF], NX-1192)
• Ability to create confi guration fi les using the installer program
mode or DL900 computer software
• Saves installation time and cost
• Virtually eliminates in-the-fi eld programming errors
• Very economical—all installation personnel can take one
to the job site
Order Information
NX-588E
NetworX Quik Link Direct Connect Module
(adaptor cable w/clips included)
North America
T 855-286-8889
Latin America
T 561-998-6114
interlogix.com
Specifi cations subject to change without notice.
© 2014 United Technologies Corporation.
All rights reserved.
Interlogix is part of UTC Building & Industrial Systems,
a unit of United Technologie s Corporation.
403-3804 2014/03 (75819)
Loading...