Interlogix NX-488, 584509-W, 60-873-95 Specsheet

Intrusion

ShatterPro
Glassbreak
Sensors

5845 series wireless acoustic
glassbreak sensors

Overview

The Wireless ShatterPro™ series, which is ideal for applications
where hardwired acoustic sensors are impractical, listens for actual
patterns of breaking glass using Pattern Recognition Technology.
These sensors feature a 20-ft. (6 m) range from sensor to glass.
The sensor is suitable for use in quiet occupied areas on the
perimeter loop.

For OEM applications, the sensor’s low-profile housing accepts
most wireless transmitters inside the back box. Each sensor
also ships with a mounting bracket that will hold larger transmitters.
The NX-488 or 60-873-95 are recommended if you prefer a
turn-key wireless acoustic sensor for use with Interlogix panels
(see ordering).

A simple hand clap feature lets the user confirm that the sensor is
operational, or a handheld tester can be activated at close range.

™

Sta n dar d Fe atu reS

• 20-ft. (6 m) radius range and 360° coverage pattern protects
an entire room with one sensor

• Factory-set sensitivity for safer installation

• Test sensor operation with a hand clap

• Includes mounting bracket

• Recognizes actual pattern of breaking glass across the

full audio band

interlogix.com

North America

4.24 in.

(108 mm)

1.70 in.

(43 mm)

3.13 in.

(80 mm)

ShatterPro

T 855-286-8889

Glassbreak Sensors

5845 series wireless acoustic
glassbreak sensors

Asia

T 852-2907-8108

Australia

T 61-3-9239-1200

Europe

T 32-2-725-11-20

Latin America

T 561-998-6114

Specifications

Voltage 3V sensor: 2.8 to 4.5 VDC

9V sensor: 6 to 16 VDC

Current 3V sensor: 17 μA typ.

9V sensor: 23μA typ.; 5 mA with LED on

Relay Output 3V sensor: Normally closed and normally open

9V sensor: Normally low with NPN transistor and 10
mOhms pull up resistor; normally high with PNP transistor
to power 16 VDC max.

Resistance, normal (closed) 700 ohms max.

Resistance, alarm (open) 10 mOhms min.

Alarm Duration 4 sec.

Transmitter Options Models: NX-488; 60-873-95

Battery: Duracell DL 123A 3 V lithium, 5 years typ.
Transmitter frequency: 319.5 MHz

Transmitter conditions: Alarm, tamper, low battery
supervisory

Glass Thickness Up to 1/4 in. (6.4 mm) for plate, tempered, laminated and

wired glass

Min. Distance from Glass 4 ft. (1.2 m)

Range 20 ft. (6 m) x 360°

Microphone Omni-directional 360° electret

Sensitivity Factory set

Operating Temperature 14 to 120°F (-10 to 50°C)

RFI Immunity 20 V/meter from 1 to 1000 MHz

Dimensions (HxWxD) Sensor: 3.13 x 4.24 x 1.70 in. (80 x 108 x 43 mm)

Bracket: 2.10 x 2.94 x 1.12 in. (53 x 75 x 28 mm)

Housing Flame-retardant ABS plastic

Color White

Mounting Location Ceiling or any wall adjacent or opposite glass

Dimensional Diagram

Sensor module with back box

4.24 in.

(108 mm)

3.13 in.

(80 mm)

Sensor module with mounting bracket

1.12 in.

2.94 in.

(75 mm)

(28 mm)

2.10 in.

(53 mm)

1.70 in.

(43 mm)

Ordering Information

584503-W

584509-W

NX-488

60-873-95

5709C-W ShatterPro handheld glassbreak tester

ShatterPro,™ wireless, 3 V, with mounting bracket,
transmitter not included

ShatterPro, wireless, 9 V, with mounting bracket,
transmitter not included

ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible

with all NetworX panels, 5-year battery included

ShatterPro, wireless, 319.5 MHz, crystal transmitter, compatible
with all 319.5 MHz Learn Mode

™

panels, 5-year battery included

interlogix.com

Specifications subject to change without notice.

© 2013 Interlogix.

All rights reserved.

Interlogix is part of UTC Climate, Controls & Securit y,

a unit of United Technologies Corporation.

305-3661 2013/06 ( 74 801)