Intel EXHIBIT T, EJM-HRMP131 User Manual

EXHIBIT T – User Manual FCC ID EJM-HRMP131
Intel® Web Tablet Warranty and License Agreement
All Intel warranties an d representations herein ar e null and void if the packaging label has been broke n or da maged. Please return product to place of purchase for replacement.
Intel Web Tablet Limited Warranty
Limited Warranty
Intel warrants that the Web Tablet hardware product, if properly used and installed, and the CD-ROM on which the accompanying software is provided, will be free from de fects in material and workmanship for a period of one (1) year after the date of purchase.
If the Web Tablet hardware product or the CD-ROM that are the subjects of this Limit ed Warranty are de fecti ve in mater ial or wo rkmans hi p dur ing the warranty period, Intel, at its o ption, will:
REPAIR the Web Tablet hardware product or CD -RO M by means of hardware and/or softwar e; OR
REPLACE the Web Tablet hardware product or CD-ROM
with a replacement Web Tablet hardware product or
CD-ROM; OR,
If Intel is un able to repair or replace the Web
Tablet hardware product or CD-ROM,
REFUND the then-current value of the Web
Tablet hardware product or CD-ROM.
THIS LIMITED WARRANTY, AND ANY IMPLIED WARRANTIES THAT MAY EXIST UNDER STATE LAW, APPLY ONLY TO THE ORIGINAL PURCHASER AND LAST ONLY FOR AS LONG AS SUCH PURCHASER CON TI N U ES TO OWN THE WEB TABLET HARDW AR E PRODUCT AND CD-ROM.
Extent of Limited Warranty
This warranty does NOT cover the performance or function al it y of a ny computer softw are in cluded in the packag e with th e Web Table t hardw are product; this warranty only covers defects in the CD-ROM media such as a broken CD-ROM or a de fect in the CD-ROM that would prevent the CD-ROM from being read by your personal computer’s CD-ROM drive. INTEL MAKES NO WARRANTY THAT THE SOFT WARE PROVIDED WITH THIS WEB TAB LET HARDWARE PRODUCT WILL FUNCTION WITHOUT INTERRUPTION OR OTHER WISE BE FREE OF ANOMALIES, ERRORS OR “BUGS.” INTEL MAKES NO WARRANTY WITH REGARD TO ANY SOFTWARE PROVIDED WITH THIS WEB TABLET HARDWARE PRODUCT UNLESS SPECIFICALL Y SET FORTH OTHERWISE IN A LICENSE AGREEMENT ACCOMPANYING SUCH SOFTWAR E.
This limited warranty does not cover any costs relating to removal or replacement of any Web Tablet hardware product, CD-ROM, or software installed on your computer.
This limited warranty does not cover damages due to external causes, including accident, problems with electrical power, usage not in accordance with produc t i nstr uctions, misuse, neglect, altera ti on, repair, or imprope r in s tallation.
How To Be Eligible For Warranty Coverage
In order to be eligible for warranty cov erage , You MUST register the Web Tablet hardware product with Intel within thirty (30) days of purchase. Registration can be completed by following the instruc ti ons in the program that is included on the Web Tabl et hardware product.
How to Obtain Warranty Service
To obtain warranty service, you must return the Web Tablet hardware product to Intel. Before ret urning the Web Tablet ha rdw a re p roduct to Intel, you must contact Tablet Customer Support at (877) 777-2203 or contact Intel by m ail a t: Intel Corpo ration, Custome r Suppo rt Depar tment M/S DC1-01, 5200 N.E. El am Young Parkway, Hillsboro, OR 97124­6497, USA (Include your nam e, address, telephone number, and email address if contacting Intel by ma il along with a description of the problem).
If you obtain warranty servic e from Intel, upon Intel’s verifi ca ti on that the Web T ablet hardware product or CD-ROM may be defective, you will be issued a Return Material Authorization (RMA). When you return the Web Tablet hardware product and CD-ROM to Intel, you m ust inc lu de the RMA number on th e outside of the package. Int el will not accept any returned Web Tablet hardware product or CD-R O M tha t ha s no RMA number on the package.
If you return the Web Tablet hardware product and/or CD-ROM to Intel, you must assume the risk of damage or loss during shippi ng. You must use the original pack aging or the equivalent, and you must pay the postage.
Intel may elect to replace or repair the Web Tablet hardware product and/ or CD-ROM with either a new or reconditioned product. The returned product shall become In te l’s property on receip t by Intel.
The replacement Web Tablet hardware product and/or CD-ROM i s warranted under this wri tt en warranty and is subject to the same limitations and exclu s io ns for the remainder of the original warranty period or ninety (90) days, whichever is longer.
WARRANTY LIMITATIONS AND EXCLUSIONS
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. INTEL MAKES NO EXPRESS WARRANTIES BEYOND THOSE STATED HERE. INTEL DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES SO THIS LIMITATION MAY NOT APPLY TO YOU.
ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
LIMITATIONS OF LIABILITY
INTEL’S RESPONSIBILITY UNDER THIS, OR ANY OTHER WARRANTY, IMPLIED OR EXPRESS, IS LIMITED TO R EPAIR, REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDIES ARE THE SOLE AND EXCLUSIVE REMEDIES FOR ANY BREACH OF WARRANTY. INTEL IS NOT R E SPONSIB LE FOR DIRECT, ACTUAL, SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DA TA STORED IN OR USED WITH A SYSTEM CONTAINING YOUR WEB TAB LET HARDWARE PRODUCT, CD-ROM, OR ACCOMPANYING SOFT WARE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENT AL OR C ONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
THIS LIMITED WAR RANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
Intel AnyPoint™ Wireless USB Adapter Limited Warranty
THE FOLLOWING WARRANTY SHALL APPLY EXCLUSIVELY TO THE ANYPOINT WIRELESS USB ADAPTER PRODUCT INCLUDED WI TH THE INTEL WEB TABLET PACKAGE. NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, THE FOLLOWING WARRANTY SHALL NOT APPLY TO THE INTEL WEB TABLET OR ANY OTHER PRODUCT HEREIN EXCEPT THE ANYPOINT WIRELESS USB ADAPTER PRODUCT. CONVERSELY, THE PRIOR INTEL WEB TABLET WARRANTY SHALL NOT APPLY TO THE ANYPOINT WIRELESS USB ADAPTER PRODUCT.
Intel warrants to the origina l owner that the hardware product del iv ere d in this package will be free from defects in material and workmanship for three (3) years following the latter of: (i) the date of purchase only if you register by returning the registration card as indicated thereon with proof of purchase; or (ii) the date of manufacture; or (iii) the registration date if by electronic means provided such registration occurs within thirty (30) days from purchase.
INTEL RESER VES THE RIGHT TO FILL YOUR ORDER WITH A PRODUCT CONTAINING NEW OR REMANUFACTURED COMPONENTS. THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, MERCHANTAB ILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING OUT OF ANY PROPOSAL, SPECIFICATION, SAMPLE OR OTHERWISE.
This warranty does not cover replacement of products damaged by abuse, accident, misuse, neglect, al t era tion, repair, disaster, improper installation or improper testing. If the product is found to be otherwise defective, Intel, at its option, wil l replace or repair the product at no charge except as set forth below, provided that you deliver the product along with a return mat erial authorization (RMA) number either to the company from whom you purchased it or to Intel (North America onl y). If you ship the product, you must assume the risk of dam a ge or loss in transit. You must use the original container (or the equi val ent) and pay
the shipping charge. In te l ma y replace or repair the product with either new or remanufactured product or parts, and the returned product becomes Intel ’s property. Intel warrants the repaired or replaced product to be free from defects in material and workmanship for a period of the greater of: (i) ninety (90) days from the return shipping date; or (ii) the period of time remaining on the original three (3) year warra nty.
This warranty gives you specifi c lega l ri ght s and you may have other rights which vary from state to state. All parts or components contained in this product are covered by Intel’s limited warrant y for th is pro duct ; the product may contain full y te ste d, recycled parts. For warranty information call the num ber below.
Returning a Defective Product (RMA)
Before returning any product, contact an Intel Customer Support Group and obtain an RMA numbe r by c al li ng:
North America only: (877) 777-2203
Other locations: Return the product to the place of purchase. If the Customer Support Group ve rifies that the product is defective , they will have the Return Material Authorization Department issue you an RMA number to place on the ou t er package of the product. Intel cannot accept any product without an RMA number on the package .
LIMITATION OF LIABILITY AND REMEDIES
INTEL SHALL HAVE NO LIABILITY FOR ANY INDIRECT OR SPECULATIVE DAMAGES (INCLUD ING, WITHOUT LIMITING THE FOREGOING, CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES) ARISING FROM THE USE OF OR INABILITY TO USE THIS PRODUCT, WHETHER ARISING OUT OF CONTRACT, NEGLIGENCE, TORT, OR UNDER ANY WARRANTY, IRRESPECTIVE OF WHETHER INTEL HAS ADVANCE NOTICE OF THE POSSIBILITY OF ANY SUCH DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS OF USE, INFRINGEMENT OF INTELLECTUAL PROPERTY, BUSINESS INTERRUPTIONS, AND LOSS OF PROFITS, NOTWITHSTANDING THE FOREGOING, INTEL’S TOTAL LIABILITY FOR ALL C LAIMS UNDER THIS AGREEMENT SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT. THESE LIMITATIONS ON POTENTIAL LIABILITIES WERE AN ESSENTIAL ELEMENT IN SETTING THE
PRODUCT PRICE. INTEL NEITHER ASSUMES NOR AUTHORIZES ANYONE TO ASSUME FOR IT ANY OTHER LIABILITIES.
Some states do not allow the exclu sion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Critical Control Applications: Intel specifically disclaims liability for use of the hardware product in critical control applications (including, for example only, safety or health care control systems, nuclear energy control systems, or air or ground traffic control systems) by Licensee or Sublicensees, and such use is entirely at the user ’s risk. Licensee agrees to defend, indemnify, and hold Intel harmless from and against any and all claims arising out of use of the hardware product in such applications by Licensee or Sublicensees.
Software: Software provided with the adapter product is not covered under the hardware warranty described above. See the applic a ble software license agreeme nt wh ic h shi ppe d w it h th e a d apter product for details on any software warranty.
Intel Software License Agreement
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING.
Do not use or loa d this software or any associated materials (collectively “Software”) until you have careful ly read the following terms an d conditions. By loading or u s ing the Software, you agree t o the terms of this Agreement. If you do not wish to agr ee , do not insta l l or use the Software.
LICENSE.
You may copy the Software onto a single computer for your personal, noncommerci al use, and you may make one back-up co py of the Software, subject to these conditions:
1
You may not copy, modify, rent, sell, distribute or transfer an y pa rt of the Software except as provided in this Agreement , an d you agree to prevent unaut ho r ized copying of the Software.
2 Y o u may not reverse engineer, decompile, or disassemble the
Software.
3 Yo u may not sublicense use of the Software. 4 The Software may include portions offere d on term s in a ddi ti on t o
those set out here, as set out in a licens e ac companying those portions.
OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppli ers. Intel 's supplier s shall be third-party beneficiaries of this license to the extent permitted by applicable law. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressl y provided, Intel grants no expres s or implied right under Intel patent s, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be ful ly bound by these terms and you agree not to retain any copies of th e Sof tware.
UPGRADES AND UPD ATES.
You hereby acknowledge and consent that the Software may be upgraded or updated remotely with or wi tho ut your knowledge, and notwithstanding such remote upgrade or update this software license will continue to be in full force and effect.
NO WARRANTIES, LIMITATION OF LIABILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, INTEL EXPRESSLY DISCLAIMS ANY WARRANTY FOR THE SOF TWARE. THE SOF TWARE AND ANY RELATED DOCUMENTATION ARE PROVIDED “AS IS,” “WITH ALL FAULTS,” WITHOUT WARRANTY OF ANY KIND. INTEL DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A P ARTICULAR PURPOSE, OR NON-INFRINGEMENT. THE ENTIRE RISK ARISING OUT OF USING THE SOFTWARE REMAINS WITH YOU. INTEL'S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY SHALL BE LIMITED TO THE COST OF THE SOFTWARE OR A REPLACEMENT COPY OF THE SOFTWARE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL INTEL OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHA TSOEVER (INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, LOST PROFITS, BUSINESS INTERRUPTION OR LOST
INFORMATION) ARISING OUT OF THE USE OR INABILITY TOUSE THE SOFTWARE, EVEN IF INTEL HAS BEEN A DVISED OF THE POSSIBILITY OF DAMAGES. SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
TERMINATION OF AGREEMENT.
Intel may terminate this
Agreement at any time if yo u v iolate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel.
APPLICABLE LAWS.
Claims arising under this Agre ement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nati ons Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized repre s entative of Intel.
EXPORT.
You shall comply fully with all relevant export laws and regulations of the Unit ed States to ass ure that the sof tware is not exported, directly or indi re ctly, in violation of United States law.
GOVERNMENT RESTRICTED RIGHTS.
The Software is provided with “RESTRICTED RIGHTS.” Us e, duplication, or disclosure by the Government is subject to restrictions a s set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or its succ es s or. Use of the Software by the Government constitutes ackn ow l edgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 5200 N.E. Elam Young Parkway, Mailstop D C1-01, Hillsboro, Oregon 97124-649 7, USA. Your specific rights may vary from country to country.
THIRD-PARTY SOFTWARE PROVIDER REQUIRED NOTICES.
Portions Copyright (c) 1995-1999 The Apache Group. All rights reserved. This product includes software developed by the Apache Group for use in the Apache HTTP server project (http://www.apache.org).
The RealPlayer is included under license from RealNetworks, Inc. Copyright © 1995 - 2000, RealNetworks, Inc. All rights reserved. RealNetworks, RealPlayer, RealAudio and RealVideo are registered trademarks of RealNetworks, In c.
Intel’s Privacy Policy
Intel respects your privacy choices. If you give us personal inform at io n, we will treat it according to our Online Privacy Policy. Intel encourages you to read our privacy policy and those of all web sites you visit. You can read our policy at www.intelwebtablet.com/legal/privacy.html.
Compliance Statements
FCC Part 15 Compliance Statement
This product has been tested and found to comply with the limits for a Class B digital d evice pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference when the equipment is operated in a residential environment.
This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that inte rferen ce will not occ ur in a part icular ins talla tion. If this equipment does cause har mf u l in terference to radio or television reception, which can be determined by turning this equipment off and on, the user is encoura ged to try to corr ect the in ter fer ence b y one or more of the following measure s:
Change the direction of the radio or TV antenna.
To the ex tent possible, relocate the radio, TV, or other recei ver
away from the product.
Plug the product into a different electrical outlet so that the product
and the receiver are on different branch circuits.
If these suggestions don’t help, consult your dealer or an experie nced radio/TV repair technician for more suggestions.
note:
This device compl ie s w ith Part 15 of the FCC Rule s. O p e r ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interf e renc e tha t ma y cause undesired operation.
Canada Compliance Statement (Industry Canada)
This digital apparatus does not ex ce ed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled: “Digital Apparatus,” ICES-003 of the Canadian Department of Communications.
To prevent radio interference to the licensed service, this de vi ce is intended to be operat ed indoors and away from windows to provide maximum shielding. Equipm ent (or its transmit antenna) that is installed outdoors is subject to licensing.
Underwriters Laboratories Inc. Compliance Statement
This product is compliant with Safety requirements fo r Information Technology Equipment and Certified by Underwriters Laboratories, Inc. to be in compliance with UL 1950 3rd Ed./CSA 950-95.
*A28674-002*
A28674-002
| 1
CONTENTS
WELCOME TO THE TABLET
Use it Everywhere in Your Home..........................2
Enjoy a Customized Web Experience...................3
WHAT IS THE INTEL WEB TA BLET?
How Does the Tablet Work? ................................4
Privacy, Security, and Parental Control.................6
The Tablet as Part of an AnyPoint™ Home
Network...............................................................7
IDENTIFYING PARTS OF THE TABLET
............................................................................8
OPERATING YOUR TABLET
Turning the Tablet On and Off............................10
Knowing Who Is Using the Tablet.......................10
Using the Button Bar and Loading Bar...............10
Checking the Wireless Signal Strength...............11
Checking the Battery Charge .............................11
Printing From the Tablet.....................................11
Turning the Screen Saver On and Off.................11
Typing With the Tablet .......................................11
TAKING CARE OF YOUR TABLET
Handling the Tablet ............................................12
Cleaning and Maintaining the Touch Screen.......12
Caring for the Tablet’s Battery............................12
Ordering Accessories and Replacement Parts....12
GOING PLACES ON THE WEB
Your Home Page ...............................................13
The Tablet Neighborhood...................................13
Searching the Web.............................................13
Going Places Outside the Neighborhood............13
Using Email With the Tablet................................13
THE TABLET AND YOUR INTERNET CONNECTION
Always Connected vs. Dial-up Connection .........14
Hanging Up the Phone Line................................14
Keeping Home Page Content Fresh ...................15
Getting Software Updates From the Web...........15
GETTING HELP
Online Help and Quick Tour................................16
Contacting Customer Support............................16
Troubleshooting .................................................16
INSTALLATION INSTRUCTIONS
Installing the Tablet and the AnyPoint Network
Drivers For the First Time....................................20
Installing the Tablet Into an Existing AnyPoint
Wireless Home Network .....................................23
Installing the Tablet Into an Existing AnyPoint
Phoneline Network .............................................25
Installing Additional Tablets.................................28
Removing and Reinstalling the Tablet PC
Software.............................................................29
Troubleshooting Installation Problems ................31
PC AND KEYBOARD RE QUIREMENTS
PC Requirements ...............................................33
Keyboard Requirements.....................................33
TABLET INFORMATION (French) 35 INDEX 43
2 | WELCOME TO THE TABLET
WELCOME TO THE TABLET
Congratulations on your purchase of the Intel® Web Tablet. We believe this new device will revolutionize the way you use the web at home. This product guide will help you learn about the tablet, so read on and take a test drive.
Use it Everywhere in Your Home
The Intel W eb Tablet is easy for everyone to use. T ake the tablet onto the veranda to surf the web while you sip iced tea on a summer afternoon. Use the tablet in the TV room to browse while you watch TV. Catch up on the latest news while you eat breakfast at your kitchen table. Listen to a web radio station while you relax in your room. The possibilities are endless, so take the tablet with you, wherever you may wander around yo ur home.
Top 10 Ways to Use The Intel Web Tabl et
1 Get the most up-to-date weather forecast and news
headlines from your tablet home page.
2 Fi nd a recipe, shop for groceries, and get tips on preparing a
special meal.
3 Get mor e i nfor mat ion o n yo ur favorite show or sports team
while youre watching television. 4 Research travel destinations and make travel arrangements. 5 Bring the tablet to the garage to look up tips on completing
that do-it-yourself project. 6 Help your kids research and print out the results of a web
search for a school homework assignment. 7 Use the tablet to surf the web while someone els e is s urfing
on the PC. 8 Show a family member your favorite photos displayed in
the family center. 9 Keep in touch by reading and sending email from the
comfort of your bedroom. 10 Enjoy listening to music on the web.
WELCOME TO THE TABLET | 3
Enjoy a Customized Web Exper ience
The home buttons at the top of the tablet let you access p ersonal home pages for up to five family members. We encourage you to customize your home page to create a page that ’s just right for you. Information available from your home page is updated frequently with new stor ies and articles, s o visit your h ome page often.
Find Out What ’s New on the Tablet
We will b e adding ne w content channel s and visu al home page themes over time to help you further cust omize and freshen up your home page. Touch the messages at the top of your home page to find out about all thats new on the tablet. You can further enhance your Internet experience by visiting www.shop-intel.com
to purchase a charging cradle or additional tablets for your home, or to order a replacement battery or stylus.
We want you to love your tablet. We hope it becomes an important part of your morning ritual before you head off to work and a way to relax and unwind in the evening. The tablet provides a convenient, simple way for everyone in your home to access the Internet.
For the tablet to meet your ever-changing needs, we have designed it so that we can automatically add new features as they become available. T o ensure we are pro viding you with the tablet experience you want,
we want to hear from
you!
Send us an email at Webtab let_feedback@intel.com. Your product ideas and suggestions will help us continue to enrich the tablet experience. We will take these ideas into consideration as we plan new tablet features.
4 | WHAT IS THE INTEL WEB TABLET?
WHAT IS THE INTEL WEB TABLET?
The Intel Web Tablet is a portable, wireless home electronic device that lets you create a customized home page, browse the web, and access email from anywhere in your home.
The tablet connects to the Internet through a PC and Internet connection you already use. Using Intel AnyPoint wireless home networking technology, the tablet allows you the freedom to surf the web from any room in your home!
How Does the Tablet Work?
You install tablet software and an AnyPoint wireless USB adapter on an existing PC in your home. Using wireless home networking technology, the tablet communicates with the PC and shares the PC’s Internet connection. This means the PC must be turned on for your tablet to work.
For information about setting up the PC to communicate with your tablet, see the installation poster or the “Installation Instructions chapter of this guide.
Internet
WHAT IS THE INTEL WEB TABLET? | 5
Tablet Software on the PC
As part of the tablet installation process, you install tablet software on the PC and set up how the tablet will share the PC’s Internet connection. Whenever the tablet software is running on the PC, you’ll see a small tablet icon in the icon tray in the lower right corner of the Windows* desktop.
Using Your Tablet With the PC
The tablet software on the PC allows the tablet and the PC to access the Internet at the same time, using just one Internet connection. That means you can use the tablet to check your stock portfolio while someone else is browsing their favorite web site on the PC!
After initial setup, use the Tablet Connection Wizard on the PC if you need to make changes to the way your tablet connects to the Internet. For example, run the wizard if you change your Internet Service Provider (ISP) or the type of Internet service you use. Use the wizard to change how often the PC connects to the Internet to get fresh tablet content. You can access the Tablet Connection Wizard from the Windows Start Menu on the PC or by clicking the tablet tray icon at the bottom of the Windows desktop.
Using Multiple Tablets in You r Home
The tablet software on the PC supports up to five unique tablet users at a time, allowing you to use more than one tablet simultaneously in your home.
The PC is turned on and the AnyPoint wirele ss adapter is connected to it. The PC has an existing Internet connection.
Note: Someone in your
home can use the PC to access the Internet or run other software while someone else uses the tablet!
Someone turns on the tablet and views their home page for the latest news. The PC automatically connects to the Internet and the tablet shares that connection.
The person using the tablet browses for information about interesting topics and events. They then decide to do some shopping on the web.
Someone else turns on a second tablet. The wireless adapter picks up the second tablets signal and begins communicating with it. The two tablets and the PC all share the same Internet connection.
6 | WHAT IS THE INTEL WEB TABLET?
Privacy, Security, and Parental Control
The Wireless Network Code
The Intel Web Tablet communicates with the PC using Intel AnyPoint wireless home networking te chnology. The network code that you create during tablet installation helps to deter anyone from listening in on the wireless connection while you browse. Only devices that use the same network code and are within a certain proximity to each other can communicate over the same wireless connection. You can change your network code at any time using the Tablet Connection Wizard on the PC and the network code setting on the tablet.
The network code that you create when you instal l the tablet software onto the PC allows multiple tablets to exist independently in a given area. The network code is a 24-bit code that provides 16 million possible codes. Similar to the security code on a cordless phone, the net work cod e on the tablet greatl y minimizes the likelihood of interference from eavesdropping and other nearby tablets.
Secure Transactions
Many web sites use a special type of secure communication that prevents unauthorized access to the information that is sent to or from those sites. The tablet supports these types of secure Internet transactions.
Youll know youre at a secure web site when a lock icon appears in the lower right corner of the tablet screen.
Internet Connection Security
The security of the connection between the PC and your Internet Service Provider (ISP) is governed by your ISP. Read the information provided by your ISP to learn about their security policies.
Proxy Settings for Security and Parental Control
If the PC has a firewall set up via a proxy server, or if the Internet browser on the PC uses a proxy server to connect to the Internet or to enable parental control software, you can set up the tablet to use the same proxy settings as your browser. Use the Tablet Connection Wizard to enter proxy settings for the tablet.
For more information about tablet proxy setti ngs , click
Help on
the Proxy Settings dialog of the Tablet Connection Wizard.
WHAT IS THE INTEL WEB TABLET? | 7
The Tablet as Part of an AnyPoint™ Home Network
By purchasing the Intel Web Tablet, youve taken the first step towards creating a PC home network. The AnyPoint wireless USB adapter, in conjunction with AnyPoint Home Network software, can be used to transform the PC into a home network server.
To create your own wireless AnyPoint Home Network, you must have one AnyPoint wireless adapter for each PC you want on your home network. In addition, you must install the AnyPoint Home Network software onto each PC.
Go to www.int el .co m/a nyp oint /
to learn more about creating an
AnyPoint home network.
Note: If you already have a wireless AnyPoint Home Network,
use its server PC as the tablet’s PC.
8 | IDENTIFYING PARTS OF THE TABLET
Charging Cradle
Power Jack
PS/2 Keyboard Jack
15
1
6
15
BatteryReset Button
Flipstand
Antenna
Stylus
Stylus Tether Anchor
Access Panel
8
9
11
1
2
1
3
7
1
0
AC Power Adapter
1
4
IDENTIFYING PARTS OF THE TABLET
Back View
Optional Charging Cradle
Front View
Speakers
Touch Screen
Back/Forward Button
Scroll Wheel
Print Button
Home Buttons
1
5
5
4
3
2
IDENTIFYING PARTS OF THE TABLE T | 9
The tablet has home buttons for up to five family members. Use your personal home button to turn on the tablet and go directly to your personal home page. If the tablet is already on, your home button takes you to your home page.
Use the
print button to print the displayed page.
Use the
back/forward button to view web pages that you
visited recently. Use the
scroll wheel to move the current web page up and
down for viewing. Use the
touch screen to interact with web pages by
touching the screen with your finger or the stylus. Use the tablet
speakers to listen to audio on the web.
Open the
access panel to use the AC power jack or
headphone jack. Raising the
antenna may improve your tablet’s ability to
send and receive signals in your home. Use the
stylus to interact with the touch screen.
Use the
stylus tether anchor if you want to attach the stylus
tether to the tablet. Use the
flip stand to keep the tablet upright when using the
tablet on a table. Use a screwdriver to remove the recharg eable
battery if you
need to replace it. Use the stylus to press the
reset button if you need to reset
the tablet.
The
AC power adapter provides electrical power for
charging the tablet and for using a hardware keyboard. It allows you to use the tablet while it is plugged into an electrical outlet instead of using the tablet battery. To plug the AC power adapter into the tablet, open the Access Panel and plug the adapter into the AC power jack.
The
optional charging cradle acts as a stand and as a power
source for your tablet. Use the
cradle power jack to plug the AC power adapter
into the charging cradle, so the tablet’s batteries can charge while the tablet is resting in the cradle.
Use the
cradle keyboard jack to pl ug in a standard PS/2
keyboard for use while the tablet is in the cradl e.
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
1
11
1
12
1
13
1
14
1
17
1
15
1
16
10 | OPERATING YOUR TABLET
Button Bar
Loading Bar
OPERATING YOUR TABLET
Turning the Tablet On and Off
Turn the tablet on by pressing your home button. (If you do not have an assigned home button, p ress an unas signed home button and begin setting it up.)
The tablet turns itself off after a period of inactivity. If you want to turn the tablet off immediately, touch
controls on the bottom
of the screen and then touch
turn tablet OFF. You can also turn
the tablet off by pressing the purple home button and the print button at the same time.
Knowing Who Is Using the Tablet
You can tell at a glance which family member is using the tablet by checking for their home button color. Each members home button colo r is highlighted on their per sonal home page and along the top edge of the button bar.
Using the Button Bar and Loading Bar
The button bar appears at the bottom of the tablet screen. Use the button bar to access tablet functions and to go places on the web. When a web page is loading, the loading bar appears just above the button bar. It shows the progress of the web page as it loads.
Button Bar and Loading Bar Features
Touch to websearch
Use the web panel to go to a specific web address (URL) or search for information on the Internet. You can also access your list of favorite web sites or history of visited pages, and check your current location on the web.
controls Use the control panel to control the
physical functions of the tablet (such as screen brightness, speaker volume, touch screen accuracy), check the tablets sign al strength and battery charge, and turn the tablet off.
favorites
Use the favorites panel to add the current web site to your list of favorite web sites, or to go to your list of favorites.
help
Get help on how to use the tablet and access the Info Center.
stop
Stop the current we b page from loading.
reload
Reload (refresh) the current web page.
horizontal scroll arrows
Move a web page right or left on the screen.
look at the to… progress indicator
View the loading progress of the current web page.
lock icon
See whether the current web site is a secure site.
OPERATIN G YOUR TABLET | 11
Checking the Wireless Signal Strength
The signal strength indicator on the control panel lets you know the strength of the signal that the tablet is receiving from the wireless adapter. If the signal strength becomes too weak (for example, you may be too far away from the wireless adapter), the tablet cannot communicate with the PC. As the signal gets weaker, browsing performance may slow or stop entirely. Moving closer to the wireless adapter and raising the antenna may improve reception.
Checking the Battery Charge
The battery power indicator, also on the control panel, lets you know how much power is availabl e in your tablet ’s rechargeable battery. Wh en the battery charge level becomes low, a warning message appears indicating that you should recharge the battery.
To recharge the battery, open the tablet access panel and connect the AC adapter to the AC Power jack. If you purchased an optional charging cradle, connect the AC adapter to the charging cradle and then set the tablet into the cradle. It takes approximately six hours to fully recharge the battery.
You can continue to use the tablet while it is charging.
Printing From t h e Tablet
You can print a web page from your tablet by pressing the print
button
on your tablet. The tablet s ends the p age t h at is cur rentl y
on the screen to the PC’s default Windows printer.
Turning the Screen Sa v er On and Off
If you turn the tablet off while it is conn ected to AC power, the tablet displays screen saver information. To turn the screen saver on and of f, touch
controls on the button bar . At the contro l
panel, touch the
screen saver on/off button .
Typing With the Tablet
The on-screen keyboard is available whenever you need it. When you want to type information in a text box, touch the text box with your finger or the stylus to bring up the on-screen keyboard. If the keybo ard does n’t d isplay when you touch a text box, touch
controls on the button bar, and then touch th e show
keyboard
button.
The on-screen keyboard is similar to a standard PC keyboard. Letters and numbers are in the same location; however, web shortcut keys and commonly used web symbols have been added. Special characters and symbols are available when you touch the
symbols key.
If you purchased a charging cradle, you can use a more conventional method of typing by plugging a standard PS/2 keyboard into the cradle keyboard jack. Place the tablet into the charging cradle and begin typing. When the PS/2 keyboard is connected, the on-screen keyboard will not automatically appear. The charging cradle must be connected to AC power when you use an attached keyboard.
Note: The tablet does not support special/shortcut keys on the
hardware keyboard, such as Internet shortcut keys and function keys.
12 | TAKING CARE OF YOUR TABLET
TAKING CARE OF YOUR TABLET
Handling the Tablet
Do not drop the tablet. The tablet’s touch screen contains a
glass element that may break when dropped or subjected to a strong impact. Avoid placing the tablet where it may accidentally fall to the floor (like on the edge of a counter). When you use the tablet’s flip stand, make sure that it is fully extended and locked.
Keep the tablet away fro m wate r. The tablet is not
waterproof. Like any electrical device, keep the tablet away from water and moisture to avoid possible injury to yourself and permanent damage to the tablet.
Avoid exposing the tablet to temperature extremes and direct sunlight for long periods of time.
Extreme temperatures and long-term exposure to the sun can cause the tablets touch screen to become dark and eventually stop working.
Cleaning and Maintaining the Touch Screen
Avoid scratching your tablet’s touch screen. Use your finger,
the provided stylus, or other pl astic-tipped p ens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object on the surface of the tablet.
Keep the touch screen clean. Use a soft cloth to clean the
screen. If necessary, dampen the cloth with a diluted window­cleaning solution to clean the touch screen. Never spray the tablet directly with any liquid or foam cleaners.
Caring for the Tablets Battery
The tablet comes with a rechargeable lithium ion battery. When fully charged, your tablets battery provides several hours of constant use. When not in use, your tablet’s battery stays charged for over six days. For tips on maximizing the length of each charge, see the tablet’s online help.
When you're not using t he tablet, keep it plug ged into AC po wer so that the battery will be fully charged the next time you use it. You cannot overcharge the tablets battery by leaving the tablet plugged in.
It takes approximately six hours to completely charge a fully depleted battery. You do not need to fully charge the batteries in order for your tablet to work. You also do not need to fully deplete the battery to gain the maximum effectiveness of the tablets battery.
While the battery is designed for years of average use, it may eventually need to be replaced. Do not dispose of the battery in your trash. Please recycle the battery in accordance with your local recycling guidelines.
Ordering Accessories and Replacement Parts
You can order additional tablets, charging cradles, and replacement parts, such as an additional stylus or battery. Order accessories or replacement parts online through the tablet’s
Info
Center
or by contacting us online at www.shop-intel.com.
!
!
!
GOING PLACES ON THE WEB | 13
GOING PLACES ON THE WEB
Your Home Page
The home buttons at the top of the tablet let you set up a personal home page. There are five home buttons , so you can set up a different home page for up to five family members. Once youve created your home page, just press your home button to go there.
When you set up your home page, you select the topics you want to see. Customize your home page with topics that match your personal interests and preferences. The information you see on your home page is updated periodically throughout the day to keep it up-to-date and accurate.
You can change your home page settings at any time using the
my page setu p lin k on yo ur home page. For m ore in formation
about setting up your home page, see the online User Guide, available when you touch
Info Center on your home page.
The Tablet Neighborhood
Your personal home page is the entrance to a unique neighborhood of web pages optimized for use with the tablet. Neighborhood pages provide easy access to brand name content and services on the web.
The topics you select for your home page provide quick access to the neighborhood pages t hat interest you most. Neig hborhood channel links let you explore other information in the neighborhood, on subjects such as news, sports, entertainment, home life, money, and shopping.
Searching the We b
The search shortcut on your ho me page hel ps you fin d web sites with information about a particular subject. When the search shortcut is not displayed, use
websearch on the button bar to
search for information.
Going Places Outside the Neighborhood
The tablet puts the web right at your fingertips. Touch
websearch on the button bar to open the web panel. Using the
web panel, you can go to a specific web address or search for information on the web.
Your favorites list lets you keep track of your favorite web sites so you can easily return to them. Your h istory list lets you get back to web pages youve recently visited.
Using Email With the Tablet
The tablet provides a free web-based email account for each home button. You can access your free email account from the tablet and from any computer that has access to the Internet. If you already have web-based email, you can set up your home page for quick access to that account.
Note: To get a free email account, you must be at least 13 years
or older.
14 | THE TABLET AND YOUR INTERNET CONNECTION
THE TABLET AND YOUR INTERNET CONNECTION
Always Connected vs. Dial-up Connection
The tablet uses the PC to connect to the Internet. With today’s technology, people have a number of options for accessing the Internet. These include:
Always connected (cable and most DSL)
Dial-up connection (phone line and satellite)
Always Connected
With a persistent connection, tablet use does not interfere with your family’s use of the phone line. The PC is always connected to the Internet. Data transfer rates are considerably faster than those of traditional analog phone line connections. This is the ideal connection type for the tablet.
Note: Some DSL providers dial up to the Internet instead of
staying connected. In these situations, configure your tablet to use a dial-up connection.
Dial-up Connection
With a dial-up connection, the PC must dial the number to your ISP (Internet Service Provider) to access the Internet. If you have a dedicated phone line for the PC, accessing an open phone line is not an issue. However, if the PC shares a phone line with the rest of your household, you cannot use the tablet and the phone at the same time.
Hanging Up the Phone Line
Important! Please read this if you access the Internet using the same phone line as your telephone or fax
machine.
If the tablet initiates a dial-up Internet connection, you can hang-up the phone line from the tablet. Otherwise, hang up the phone line from the PC.
Hanging up the phone from the tablet
1 Touch the controls button on the button bar to open the
control panel.
2 Touch the
turn tablet OFF button.
3 At the PC, a warning message appears indicating that the
dial-up connection is about to be ended.
4 Wait a few seconds and the PC will automatically
disconnect, or click
Disconnect Now on the PC to hang up
the phone line.
Hanging up the phone from the PC
1 At the PC, check the icon tray in the lower-right
corner of the screen for your ISP’s connection icon.
2 Right-click the icon, and select
Disconnect.
Note: This procedure works for most dial-up networking (DUN)
software and America Online* (AOL). If this procedure does not work on your PC, check your ISP documentation for information about disconnecting a dial-up session.
In case of an emergency, physically disconnect the phone
line from the PC by unplugging the phone line from the
wall or from the back of the PC.
!
!
THE TABLET AND YOUR INTERNET CONNECTION | 15
Keeping Home Page Content Fresh
The tablet uses your Int ernet connect ion period ically through out the day to get fresh copies of your familys home pages and tablet neighborhood content. This ensures that the information you see on your home page is current when you turn on the tablet.
The tablet is initially set up to get fresh neighborhood content three times each day. When you set up the PC during tablet installation, you can specify when and how of ten you want the tablet to get fresh content, up to four times each day. You can update these settings at any time by running the Tablet Connection Wizard on the PC.
Note: If the PC uses your phone line to connect to the Internet
and your dial-up connection is a toll call (metered or long distance), you may want to change the frequency with which the tablet refreshes its content.
Getting Software Updates From the Web
The tablet is designed to check for tablet software updates automatically so that you always have the latest and greatest features available to your tablet.
Software updates are usually performed overnight to reduce possible inconvenience. The PC must be on in order for the tablet to get the updates.
16 | GETTING HELP
GETTING HELP
Online Help and Quick Tour
If you have questions regarding your tablet, use the tablet’s online
Info Center . At the Info Center, youll find a variety of
information, including:
Answers to our custome rs most frequently asked questions.
A Quick Tour of the tablet.
An online User Guide containing topics on how to use the
tablet and perform tablet tasks.
Information about technical issu es.
T o access the Info Center from the tablet, touch the link on your home page. If you cant get to the Info Center using the tablet, use your PC Internet browser to go to:
www.intel.com/home/webtablet/support
To learn more about a specific tablet panel, touch the help button on the panel. This context help provides information about the features that are available on the panel and how they work.
Contacting Customer Support
Our customer support team wants to hear from you. Touch the
Contact Us link at the bottom of your home page or at the Info
Center to send your ideas and suggestions or to submit a problem report. You can call our customer support group toll free at (877) 777-2203 or email us at
Webtablet_support@intel.com.
Troubleshooting
Low or bad wireless signal
Distance from the PC’s wireless adapter and interference from household appliances (cordless phones, microwave ovens, remote controls) are the most common reasons for low or bad signals. To achieve a stronger signal, try the following:
Move the tablet closer to the PC.
Raise the tablets antenna.
Change the location of the PCs wireless adapter—move it
to a high point, like a shelf.
Rotate the PCs wireless adapter to different positions.
Move the location of the appliance that is causing the
interference or turn the appliance off.
Low battery
A low battery warning message indicates that the charge in your tablets battery is running low.
To recharge the battery, open the tablet access panel and connect the AC adapter to the AC Power jack. If you purchased an optional charging cradle, connect the AC adapter to the charging cradle and then set the tablet into the cradle. It takes approximately six hours to fully recharge the battery.
Leave the tablet plugged in for at least six hours to fully charge the battery. You can continue to use the tablet while it is recharging.
GETTING HELP | 17
Adjusting the touch screen acc uracy
If you touch the screen at one spot, but the tablet responds as if you touched somewhere nearby (for example, if you touch a web-page link but the tablet acts as if you touched a nearby link), you need to adjust the screen accuracy. To adjust your touch screen, touch the
controls button to open the control
panel, and then touch the area labelled
touch here to adjust
screen accuracy
.
Note: If you cannot open the control panel from the button bar,
press the
forward button and the print button at the same time to
begin adjusting the touch screen accuracy.
Blank or partially-loaded w eb pages
If a web page does not display properly, touch the reload button on the button bar.
Tablet cant connect to the PC
If the tablet cant connect to the PC, you may be too far away from the PC’s wireless adapter, or there may be something wrong at the PC. Make sure that the PC’s wireless adapter is securely plugged in and that the PC is turned on and logged in.
Addition al troubleshootin g
For additional tablet troubleshooting information, go to the tablets onli ne hel p b y tou c hing
Info Center on your home page.
If you cant get to the Info Center, go to the PC, click the tablet tray icon at the bottom of the Windows desktop, and then select
Help.
18 | GETTING HELP
INSTALLATION IN STRUCTIONS | 19
INSTALLATION INSTRUCTIONS
Follow the instructions on the installation poster to set up your
new Intel Web Tablet. The poster contains all the information you need to set up the tablet and install the tablet software on your PC.
The Intel Web Tablet uses Intel AnyPoint Wireless Home Networking software to communicate with the web. Because some homes may already have home networking installed on their home PCs, tablet setup may differ from household to household. If the instructions on the installation poster that came with your tablet do not match your situation, find the installation procedure in this chapter that does, and follow those steps to install the web tablet.
T roubleshooting Installation Problems
If you experience any problems during setup, refer to the Troubl e shooting Installation Problems se c tio n tha t be gins on page 31 of this guide or contact customer support toll free at (877) 777-2203.
Installing the Tablet and the AnyPo in t Network Drivers F or t h e
First Time........................................................................... Page 20
Use this installation procedure if this is your first tablet and you do not already have AnyPoint home networking software installed on your PC.
Installing the Tablet Into an Existi n g An y P o int Wireless Home
Network.............................................................................Page 23
Use this installation procedure if this is your first tablet and you already h ave an AnyPoin t Wireless Home Network installed.
Installing the Tablet Into an Existing AnyPoint Phoneline
Network.............................................................................Page 25
Use this installation procedure if this is your first tablet and you already h ave an AnyPoint Phoneline Home Network installed.
Installing Additional Tablets.............................................Page 28
Use this procedure if you already have an Intel Web Tablet and you are adding an additional tablet.
Removing and Reinstalling the Tablet PC Software...... Page 29
Use these procedures if you already installed the tablet software on the PC, and you need to remo ve and/or rein stall the software.
Important: The PC on which you install the tablet software must
have a working Internet connection.
20 | INSTALLATION INSTRUCTIONS
Installing the Tablet and the AnyPoint Network Drivers For the Fir st Time
Use the following steps if t h is i s y our fi rs t tab let an d yo u do not already have AnyPoint home net working installed on your PC.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Note: If you use the flip stand on the back of the tablet to keep
the tablet upright, make sure t he stand is fully extended.
Install the Wireless Adapter (On the PC)
1 Shut down the PC. 2 Plug the AnyPoint adapter cable into an open USB port. 3 Turn on the PC. 4 After the PC s tarts up,
insert the Intel Web Tablet Setup CD
into the CD-ROM drive
. The CD is located inside the back
cover of this Product Guide.
Install the Drivers (On the PC) Important!
Do not click Cancel on ANY screen in the Add New
Hardware wizard. 1 When the Add New Hardware wizard starts, click
Next to
begin installing the drivers.
2 Select
Search for the best driver for your device and click
Next.
3 If you are prompted for a drive, make sure the
CD-ROM
drive
check box is checked. Click Next twice to install the
drivers.
4Click
Finish. On Windows* 98 systems, you may need to
click
Finish twice.
5 If you are pr ompted to restart the PC, click
No. Y ou may be
asked to restart the PC more than once – click
No each time.
Install the Tablet Software (On the P C)
After the drivers are installed, the Intel Web Tablet Setup screen appears.
Note: If the Intel Web Tablet Setup screen does not appear, open My Computer on your desk top. Double-click the CD-ROM
drive, and then double-click
setup.exe.
1Click Install to begin installing the tablet software. 2 Follow the on-screen instructions to install the software.
INSTALLATION IN STRUCTIONS | 21
Create a Network Code (On the PC)
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the space provided below. You will need this networ k code to set up the tablet.
For more information about creating a network code, click Help on the Setup Wizard screen.
2 If the PC has mor e than one Internet co nnection, choos e the
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and confirm your passwor d, and then click
OK.
Restart Your Computer
When you complete the Setup Wizard, you will be asked to restart your PC.
1Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt. If this is your first time logging on, type a user name but no
password and click
OK.
3 W hen restart completes, yo ull see a Congratulations screen
that displays the network code you created.
Note: If you are an America Online* (AOL*) customer
and you use AOL as your Internet Service Provider (ISP), you must set your AOL preferences to save the passwords for your AOL screen names. Do this before you continue with this installation.
Return to the Tablet and Complete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the network code
that you created on the PC and wrote down in the previous section.
The tablet will reset when its setup process completes. This could take some time.
Write your network code here:
22 | INSTALLATION INSTRUCTIONS
Set Up the Tablet Home Buttons
After the tablet resets, you are ready to set up the home buttons for each member of your family. The first person setting up a home button will be asked to fill out a tablet registration for the family.
1 Press a home button. 2 Follow the directions on the screen to set up that home
button for you or a member of your family.
3 When the home page appears, you can begin using the
tablet right away or touch
my page setup to further
customize the page.
Each of your family members can repeat steps 1-3 to set up their own home button.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time. You can use the tablet while it is charging.
INSTALLATION IN STRUCTIONS | 23
Installing the Tablet Into an Existing AnyPoint Wireless Home Network
Use the following steps if this is your first tablet and you already have an AnyPoint Wireless Home Network installed.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Note: If you use the flip stand on the back of the tablet to keep
the tablet upright, make sure t he stand is fully extended.
Install the Tablet Software On Your Home Network Server PC Important:
Because the tablet will use your existing Intel AnyPoint wireless home networking sof tware to commu nicate with the Internet, you need to install the tablet software on your AnyPoint Home Networks server PC.
Note: If you purchased an Intel Web Tablet that includes a
wireless USB adapter, do NOT install the new adapter on the PC. The tablet will use your existing AnyPoint wireless adapter to communicate with the PC.
1 At the PC,
insert the Intel Web Tablet Setup CD into the
CD-ROM drive
. The CD is located inside the back cover of
the Product Guide.
2 From the Windows desktop, open
My Computer and
double-click the CD-ROM drive.
3 Double-click
setup.exe. The Intel Web Tablet Setup screen
appears.
4 Click
Install to begin installing the tablet software.
Follow the on-screen instructions to install the so ftware.
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the space provided below. You will need this network code to set up the tablet.
For more information about creating a networ k code , cli ck Help on the Setup Wizard screen.
2 I f the PC has mo re than one Intern et connect ion, choo se th e
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and confirm your password, and then click
OK.
Write your network code here:
24 | INSTALLATION INSTRUCTIONS
Restart Your Computer
When you complete the Setup Wizard, you will be asked to restart your PC.
1Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt. If this is your first time loggin g on, type a user name but no
password and click
OK.
3 W hen restart completes, youll see a Congratulations screen
that displays the network code you created.
Note: If you are an America Online* (AOL*) customer
and you use AOL as your Internet Service Provider (ISP), you must set your AOL preferences to save the passwords for your AOL screen names. Do this before you continue with this installation.
Return to the Tablet and Com plete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the AnyPoint
network code that you wrote down in the previous section.
The tablet will reset when its setup process completes. This may take some time.
Set Up the Tablet Home Buttons
After the tablet resets, you are ready to set up the home buttons for each member of your family. The first person setting up a home button will be asked to fill out a tablet registration for the family.
1 Press a home button. 2 Follow the directions on the screen to set up that home
button for you or a member of your family.
3 When the home page appears, you can begin using the
tablet right away or touch
my page setup to further
customize the page.
Each of your family members can repeat steps 1-3 to set up their own home button.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time. You can use the tablet while it is charging.
INSTALLATION IN STRUCTIONS | 25
Installing the Tablet Into an Existing AnyPoint Phoneline Network
Use the following steps if this is your first tablet and you already have an AnyPoint Phoneline Home Network installed.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Note: If you use the flip stand on the back of the tablet to keep
the tablet upright, make sure t he stand is fully extended.
Update the AnyPoint Phoneline Adapter Settings
Before installing the AnyPoint wireless USB adapter, you need to change the AnyPoint Phoneline adapter settings.
Important! You must update the adapter settings on each
computer that is part of the AnyPoint phoneline network. 1 At each computer that is part of your home network, open
the Windows*
Control Panel and double-click the Netwo rk
icon. The Network dialog displays.
2 Click the
Configuration tab and locate the TCP/I P - > Inte l(R )
AnyPoint USB Phoneline Adapter
in the list of installed
components.
3 Click the AnyPoint adapter to select it, and then click
Properties. The TCP/IP Properties dialog displays.
4 Click the
IP Address tab.
5 Select the
Specify an IP ad dress radio button, and then
enter the following values:
IP Address: 192.168.168.1 Subnet Mask: 255.255.255 . 0
Note:
Each computer on your home network must have a unique IP address. Use a unique number between 2 and 254 for the last number of the IP address on each of your computers.
6 Click
OK twice to close the Network dialog.
7 If you are prompted to restart the computer, click
Yes.
Install the Tablet Software On Your Home Network Server PC Important:
Because the tablet will connect to the Internet
through the PC, you must install the tablet software on your AnyPoint Home Network’s server PC.
1 Shut down the PC. 2 Plug the AnyPoint adapter cable into an open USB port. 3 Turn on the PC. 4 Af ter the PC starts up,
insert the Intel Web Tablet Setup CD
into the CD-ROM drive. The CD is located inside the back
cover of this Product Guide.
26 | INSTALLATION INSTRUCTIONS
Install the Drivers (O n t h e PC) Important!
Do not click Cancel on ANY screen in the Add New
Hardware wizard. 1 When the Add New Hardware wizard starts, click
Next to
begin installing the drivers.
2 Select
Search for the best driver for your device and click
Next.
3 If you are prompted for a drive, make sure the
CD-ROM
drive
check box is checked. Click Next twice to install the
drivers.
4Click
Finish. On Windows* 98 systems, you may need to
click
Finish twice.
5 If you are pr ompted to restart the PC, click
No. Y ou may be
asked to restart the PC more than once – click
No each time.
Install the Tablet Software (On the PC)
After the drivers are installed, the Intel Web Tablet Setup screen appears.
Note: If the Intel Web Tablet Setup screen does not ap pear, open My Computer on your desk top. Double-click the CD-ROM
drive, and then double-click
setup.exe.
1Click Install to begin installing the tablet software. 2 Follow the on-screen instructions to install the software.
Create a Network Code (On the PC)
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the space provided below. You will need this network code to set up the tablet.
For more information about creating a network code, click Help on the Setup Wizard screen.
2 If the PC has more than one Internet connection, cho ose the
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and confir m your pas sword, and t hen click
OK.
Restart Your Computer
When you complete the Setup Wizard, you will be asked to restart your PC.
1Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt. If this is your first time logging on, type a user name but no
password and click
OK.
3 W hen restart completes, youll see a Congratulations screen
that displays the network code you created.
Write your network code here:
INSTALLATION IN STRUCTIONS | 27
Note:
If you are an America Online* (AOL*) customer and you use AOL as your Internet Service Provider (ISP), you must set your AOL preferences to save the passwords for your AOL screen names. Do this before you continue with this installation.
Return to the Tablet and Com plete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the network code
that you created on the PC and wrote down in the previous section.
The tablet will reset when its setup process completes. This could take some time.
Set Up the Tablet Home Buttons
After the tablet resets, you are ready to set up the home buttons for each member of your family. The first person setting up a home button will be asked to fill out a tablet registration for the family.
1 Press a home button. 2 Follow the directions on the screen to set up that home
button for you or a member of your family.
3 When the home page appears, you can begin using the
tablet right away or touch
my page setup to further
customize the page.
Each of your family members can repeat steps 1-3 to set up their own home button.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time. You can use the tablet while it is charging.
28 | INSTALLATION INSTRUCTIONS
Installing Additional Tablets
Use the following steps if you already have an Intel Web Tablet installed in your home and you are adding a new tablet.
Note: If you purchased an Intel Web Tablet that includes a
wireless adapter, do NOT install the new adapter on the PC. The tablet will use your existing wireless adapter to communicate with the PC.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Get Your N etwork Co de From the PC
1 At the PC, open the Windows Control Panel, then double-
click the
Wireless Control Panel icon. The Wireless Control
Panel dialog displays.
2 Write down the network code in the space provided below.
You will need this network code to set up the tablet.
3 Close the Wireless Control Panel dialog.
Return to the Tablet and Co mplete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the AnyPoint
network code that you found on the PC and wrote down in the previous section.
The tablet will reset when its setup process completes.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time.You can use the tablet while it is charging.
Register Your New Tablet
After the tablet resets, it is ready for use. The first time you press a home button, youll be asked to register your new tablet.
Accessing Your Home Page From the New Tablet
The home buttons on the new tablet will match the home buttons on your existi n g t ab l et( s). Us e t h e s ame home button on each tablet to access your personal home page. For example, if your home button is the green one, use the green button on any of your tablets to access your home page.
Only one tablet can use a particular home button at any given time. If you press a home button and someone is already using that button on another tablet, youll receive a message notifying you that another tablet is using that button.
Write your network code here:
INSTALLATION IN STRUCTIONS | 29
Removing and Reinstalling the Tablet PC Software
If the tablet software on the PC becomes damaged, you may need to reinstall the tablet software. In some cases, you can reinstall the software over the existing installation. In other cases, you may need remove th e software first, an d then reinstall a fresh copy.
Remove the tablet PC software
1 At the PC, open the Windows Start menu and select:
Programs > Intel Web Tablet > Uninstall Tablet Software
The Remove Tablet Software dialog displays.
2 Select the software you want to remove:
Make sure the
Remove Intel Web T ablet software check
box is selected.
If this PC is part of an AnyPoint home network, clear the
Remove Intel AnyPoint Home Networking software
check box. Otherwise, leave this check box selected.
3Click
Remove. The PC will begin removing the tablet
software from the PC. If yo u are prompted to remove any shared files, click
Yes.
4 When the software removal completes, click
Restart. After
the PC finishes restarting, use the following steps to reinstall the tablet software.
Reinstall the tablet PC software
1 At the PC, insert the Intel Web Tablet Setup CD into the
CD-ROM drive. The CD is located inside the back cover of the Product Guide.
2 From the Windows desktop, open
My Computer and
double-click the CD-ROM drive.
3 Double-click
setup.exe. The Intel Web Tablet Setup screen
appears.
4 Click
Install to begin installing the tablet software. Follow
the on-screen instructions to install the software. The Setup Wizar d sh ows several screens , and displ ays you r
AnyPoint wireless home network code. This is the network code that is currently set up on the tablet.
When you complete the Setup Wizard, you will be asked to restart your PC.
5 Click
Restart Now to complete the PC setup.
When the PC restarts, you may receive a Windows logon prompt. If this is your first time logging on, type a user name but no password and click
OK.
6 When the restart completes, you’ll see a Congratulations
screen that displays your network code.
30 | INSTALLATION INSTRUCTIONS
Restore Your Tablet Registration Note:
These steps are required only if you removed the tablet PC
software and then reinstalled it. 1 Go to the tablet and press one of the home buttons. Two
introductory help pages display, followed by the Tablet Registration page.
2 On the tablet registration page, touch the
Touch here to
restore your registration information link (located in the
upper, right section of the page).
3 Follow the instructions on the Restore Registration page to
restore your tablet registration, then touch
Finish.
INSTALLATION IN STRUCTIONS | 31
Troubleshooting Installation Problems
If you exit Set up before all step s are completed...
If you exit Setup before all of the installation steps are complete, you can continue the installation later. To restart installation at a later time:
1 Place the In tel Web Table Setup CD into your CD-ROM
drive.
2 At the Windows de sk top, go to
My Computer and double-
click the CD-ROM Drive
3 Double-click
setup.exe.
Setup will begin at the point where you exited. Follow the instructions on the screens to complete the setup.
If you receive Dial-up Networking errors...
If you receive the following error during s etup:
You have Dial-up Networking installed but it is not configured to use any ISPs. Please configure Dial-up Networking before running the connection wizard again.
Do the following: 1 Follow the instructions from you Internet Service Provider
(ISP) to set up your PC Internet connection.
2 After the connection is set up and working, open the
Windows
Start menu, and then select Programs > Intel We b
Tablet > T ab let Connection Wizard
. The Intel Web Tablet
Connection Wizard displ ays .
3 Follow the directions on the Wizard screens to set up the
tablet to use your dial-up connection.
32 | INSTALLATION INSTRUCTIONS
If setup detects more than one adapter on the PC...
If you receive an error message telling you that the PC has more than one adapter, it m eans the PC h as a n etwork adapter with an IP address that conflicts with the AnyPoint adapter.
Before continuing with setup, do the following to identify and correct the conflict:
1 Write down the name of the network adapter(s) listed in the
error message.
1 Click the
Exit Setup button.
2 Open the Windows
Start menu and select Run.
3 In the text box, type:
winipcfg
and then click OK. The IP Configuration dialog displays
4 Open the selection list, and select each of the adapters that
you wrote down in step one. If any of these adapters have an IP address beginning with 169.254, use the following steps to change its IP address before continuing with tablet setup.
5Click
OK to close the IP Configuration dialog.
6 Open the Windows
Control Panel and double-click the
Network icon. The Network dialog displ ays.
7 Click the
Configuration tab and locate the network adapter
you identified in step 4.
8 Click the adapter to se lect it, and then click
Properties. The
TCP/IP Properties dialog displays.
9 Click the
IP Address tab.
10 Select the
Specify an IP address radio button, and then
enter the following values:
IP Address: 192.168.168.1 Subnet Mask: 255.255.255.0
11 Click OK twice to close the Network dialog. 12 If you are prompted to restart the computer, click
Yes.
Note: If the adapter you updated is part of a home network, the
IP addresses of all computers on the network must be updated to begin with 192.168.168.
You are now ready to continue setting up the tablet PC software.
1 Insert the Intel Web Tablet Setup CD in to the CD-ROM
drive.
2 Open the Windows
Control Panel.
3 Double-click the CD-ROM drive, and then double-click
setup.exe.
4 The setup program will continue where it left off. Follow
the instructions on the installation poster to complete setting up the tablet.
PC AND KEYBOARD REQUIREMENTS | 33
PC AND KEYBOARD REQUIREMENTS
PC Requirements
We recommend the following minimum PC configuration to work with your tablet:
PC with a 200 MHz Intel Pentium
®
processor performance
level or better
120 MB of available hard drive space
64 MB of RAM
Sound card (to enable audio on the tablet)
Windows* 98 or Windows Millennium Edition* operating system
An available USB port
An established Internet connection, either dial-up or always connected (broadband), with a minimum connection speed of 56K
Internet access through the provider of your choice
Printer (to enable printing from the tablet)
Keyboard Requirements
If you purchased an optional charging cradle, you can use a standard PS/2 keyboard with the tablet by attaching the keyboard to the cradle. The keyboard that you attach must meet the following requirements in order to work correctly with the tablet:
Connector type: PS/2
Maximum current draw or consumption: 0.5 amps
Canada Compliance Statement (Industry Canada)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled: “Digital Apparatus,” ICES-003 of the Canadian Department of Communications.
To preve nt radio interfere nce to th e licens ed service , this devic e is inten ded to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit an tenna) that is installed outdoors is subject to
licensing.
34 | TABLET INFORMATION (French)
TABLET INFORMATION (French)
W elcome to the Intel® Web T ablet. The tablet is designed to give you and your entire household simple, portable, and personal access to the Internetfrom any room in you r h ome. The tablet provides quick access to the Internet and email. Each of the five home buttons along the top of the t ablet can b e set up to pro vide a separate, customized web experience for one of your family members.
The tablet connects to the Internet through an existing Internet connection on a PC in your home. That PC uses Intel AnyPoint wireless home networking technology to communicate with the tablet.
PC Requirements
We recommend the following minimum PC configuration:
PC with a 200 MHz Intel Pentium
®
processor performance
level or better
120 MB of available hard drive space
64 MB of RAM
Sound card (to enable audio on the tablet)
Windows 98 or Wind ows Millen nium Edition* operating
system
An available USB port
An established Internet connection, either dial-up or always
connected (broadband), with a minimum connection speed of 56K
Internet access through the provider of your choice
Printer (to enable printing from the tablet)
CONTENTS
IDENTIFYING PARTS OF THE TABLET 35
TAKING CARE OF YOUR TAB L ET 37
THE TABLET AND YOUR INTERNET CONNECTION 38
INSTALLATION INSTRUCTIONS 40
IDENTIFYING PARTS OF THE TABLET | 35
Charging Cradle
Power Jack
PS/2 Keyboard Jack
1
5
1
6
15
BatteryReset Button
Flipstand
Antenna
Stylus
Stylus Tether Anchor
Access Panel
8
9
11
1
2
1
3
7
1
0
AC Power Adapter
1
4
IDENTIFYING PARTS OF THE TABLET
Front View
Optional Charging Cradle
Speakers
Touch Screen
Back/Forward Button
Scroll Wheel
Print Button
Home Buttons
1
5
5
4
3
2
Back View
36 | IDENTIFYING PARTS OF THE TABLET
The tablet has home butt ons for up t o five family members. Use your personal home button to turn on the tablet and go directly to your personal home page. If the tablet is already on, your home button takes you to your home page.
Use the
print button to print the displayed page.
Use the
back/forward button to view web pages that you
visited recently. Use the
scroll wheel to move the current web page up and
down for viewing. Use the
touch screen to interact with web pages by
touching the screen with your finger or the stylus. Use the tablet
speakers to listen to audio on the web.
Open the
access panel to use the AC power jack or
headphone jack. Raising the
antenna may improve your tablet’s ability to
send and receive signals in your home. Use the
stylus to interact with the touch screen.
Use the
stylus tether anchor if you want to at tach t he stylus
tether to the tablet. Use the
flip stand to keep the tablet upright when using the
tablet on a table. Use a screwdriver to remove the rechargeable
battery if y ou
need to replace it. Use the stylus to press the
reset button if you need to reset
the tablet.
The
AC power adapter provides electrical power for
charging the tablet and for using a hardware keyboard. It allows you to use the tablet while it is plugged into an electrical outlet instead of using the tablet battery. To plug the AC power adapter into the tablet, open the Access Panel and plug the adapter into the AC power jack.
The
optional charging cradle acts as a stand and as a power
source for your tablet. Use the
cradle power jack to plug the AC power adapter
into the charging cradle, so the tablets batteries can charge while the tablet is resting in the cradle.
Use the
cradle keyboard jack to plug in a standard PS/2
keyboard for use while the tablet is in the cradle.
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
10
1
11
1
12
1
13
1
14
1
17
1
15
1
16
TAKING CARE OF YOUR TABLET | 37
TAKING CARE OF YOUR TABLET
Handling the Tablet
Do not drop the tablet. The tablet’s touch screen contains a
glass element that may break when dropped or subjected to a strong impact. Avoid placing the tablet where it may accidentally fall to the floor (like on the edge of a counter). When you use the tablet’s flip stand, make sure that it is fully extended and locked.
Keep the tablet away fro m wate r. The tablet is not
waterproof. Like any electrical device, keep the tablet away from water and moisture to avoid possible injury to yourself and permanent damage to the tablet.
Avoid exposing the tablet to temperature extremes and direct sunlight for long periods of time.
Extreme temperatures and long-term exposure to the sun can cause the tablets touch screen to become dark and eventually stop working.
Cleaning and Maintaining the Touch Screen
Avoid scratching your tablet’s touch screen. Use your finger,
the provided stylus, o r ot her plast ic-ti pped pens inte nded for us e with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object on the surface of the tablet.
Keep the touch screen clean. Use a soft cloth to clean the
screen. If necessary, dampen the cloth with a diluted window­cleaning solution to clean the touch screen. Never spray the tablet directly with any liquid or foam cleaners.
Caring for the Tablets Battery
The tablet comes with a rechargeable lithium ion battery. W hen fully charged, your tablets battery provides several hours of constant use. When not in use, your tablets battery stays charged for over six days. For tips on maximizing the length of each charge, see the tablet’s online help.
When you're not using the tablet , keep it plugged into AC power so that the battery will be fully charged the next time you use it. You cannot overcharge the tablet’s battery by leaving the tablet plugged in.
It takes approximately six hours to completely charge a fully depleted battery. You do not need to fully ch arge the batteries in order for your tablet to work. You also do not need to fully deplete the battery to gain the maximum effectiveness of the tablets battery.
While the battery is designed for years of average use, it may eventually need to be replaced. Do not dispose of the battery in your trash. Please recycle the battery in accordance with your local recycling guidelines.
Ordering Accessories and Replacement Parts
You can order additional tablets, charging cradles, and replacement parts, such as an additional stylus or battery. Order accessories or replacement parts online through the t ablet’s
Info
Center
or by contacting us online at w ww.shop-intel.com.
!
!
!!
38 | THE TABLET AND YOUR INTERNET CONNECTION
THE TABLET AND YOUR INTERNET CONNECTION
Always Connected vs. Dial-up Connection
The tablet uses the PC to connect to the Internet. With today’s technology, people have a number of options for accessing the Internet. These include:
Always connected (cable and most DSL)
Dial-up connection (phone line and satellite)
Always Connected
With a persistent connection, tablet use does not interfere with your family’s use of the phone line. The PC is always connected to the Internet. Data transfer rates are considerably faster than those of traditional analog phone line connections. This is the ideal connection type for the tablet.
Note: Some DSL providers dial up to the Internet instead of
staying connected. In these situations, configure your tablet to use a dial-up connection.
Dial-up Connection
With a dial-up connection, the PC must dial the number to your ISP (Internet Service Provider) to access the Internet. If you have a dedicated phone line for the PC, accessing an open phone line is not an issue. However, if the PC shares a phone line with the rest of your household, you cannot use the tablet and the phone at the same time.
Hanging Up the Phone Line
Important! Please read this if you access the Internet using the same phone line as your telephone or fax m ac h in e.
If the tablet initiates a dial-up Internet connection, you can hang-up the phone line from the tablet. Otherwise, hang up the phone line from the PC.
Hanging up the phone from the tablet
1 Touch the controls button on the button bar to open the con-
trol panel.
2 Touch the
turn tablet OFF button.
3 At the PC, a warning message appears indicating that the
dial-up connection is about to be ended.
4 Wait a few seconds and the PC will automatically
disconnect, or click
Disconnect Now on the PC to hang up
the phone line.
Hanging up the phone from the PC
1 At the PC, check the icon tray in the lower-right
corner of the screen for your ISP’s connection icon.
2 Right-click the icon, and select
Disconnect.
Note: This procedure works for most dial-up networking (DUN)
software and America Online* (AOL). If this procedure does not work on your PC, check your ISP documentation for information about disconnecting a dial-up session.
In case of an emergency, physically disconnect the phone line
from the PC by unplugging the pho ne line from the wa ll or from the back of the PC.
THE TABLET AND YOUR INTERNET CONNECTION | 39
Keeping Home Page Content Fresh
The tablet uses your Int ernet connect ion period ically through out the day to get fresh copies of your familys home pages and tablet neighborhood content. This ensures that the information you see on your home page is current when you turn on the tablet.
The tablet is initially set up to get fresh neighborhood content three times each day. When you set up the PC during tablet installation, you can specify when and how of ten you want the tablet to get fresh content, up to four times each day. You can update these settings at any time by running the Tablet Connection Wizard on the PC.
Note: If the PC uses your phone line to connect to the Internet
and your dial-up connection is a toll call (metered or long distance), you may want to change the frequency with which the tablet refreshes its content.
Getting Software Updates From the Web
The tablet is designed to check for tablet software updates automatically so that you always have the latest and greatest features available to your tablet.
Software updates are usually performed overnight to reduce possible inconvenience. The PC must be on in order for the tablet to get the updates.
40 | INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Follow the instructions on the installation poster to set up your
new Intel Web Tablet. The poster contains all the information you need to set up the tablet and install the tablet software on your PC.
The Intel Web Tablet uses Intel AnyPoint Wireless Home Networking software to communicate with the web. Because some homes may already have home networking installed on their home PCs, tablet setup may differ from household to household. If the instructions on the installation poster that came with your tablet do not match your situation, find the installation procedure in this chapter that does, and follow those steps to install the web tablet.
Troubleshoo ting Installation Problems
If you experience any problems during setup, refer to the Troubleshooting Installation Problems section that begins on page 53 of this guide or contact customer support toll free at (877) 777-2203.
Installing the Tablet and the AnyPoint Network Drivers For the First Time on page 41
Use this installation procedure if this is your first tablet and you do not already have AnyPoint home networking software installed on your PC.
Installing the Tablet Into an Existing AnyPoint Wireless Home Network on page 44
Use this installation procedure if this is your first tablet and you already have an AnyPoint Wireless Home Network installed.
Installing the Tablet Into an Existi ng AnyPoint Phoneline Network on page 46
Use this installation procedure if this is your first tablet and you already have an AnyPoint Phoneline Home Network installed.
Installing Additional Tablets” on page 49
Use this procedure if you already have an Intel Web Tablet and you are adding an additional tablet.
Removing and Reinstalling the Tablet PC Softwar e” on page 50
Use these procedures if you already installed the tablet software on the PC, an d you need t o remove an d/or rein stall the software.
Important: The PC on which you install the tablet software must
have a working Internet connection.
INSTALLATION IN STRUCTIONS | 41
Installing the Tablet and the AnyPoint Network Drivers For the Fir st Time
Use the following steps if this is your first tablet and you do not already have AnyPoint home net working installed on your PC.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Note: If you use the flip stand on the back of the tablet to keep
the tablet upright, make sure t he stand is fully extended.
Install the Wireless Adapter (On the PC)
1 Shut down the PC. 2 Plug the AnyPoint adapter cable into an open USB port. 3 Turn on the PC. 4 After the PC star ts up ,
insert the Intel Web Tablet Setup CD
into the CD-ROM drive
. The CD is located inside the back
cover of this Product Guide.
Install the Drivers (On the PC) Important!
Do not cli ck Cancel on ANY screen in the Add New
Hardware wizard. 1 When the Add New Hardware wizard starts, click
Next to
begin installing the drivers.
2 Select
Search for the best driver for your device and click
Next.
3 If you are prompted for a drive, make sure the
CD-ROM
drive
check box is checked. Click Next twice to install the
drivers.
4 Click
Finish. On Windows* 98 systems, you may need to
click
Finish twice.
5 I f you are prompted to restart the PC, click
No. You may be
asked to restart the PC more than once – click
No each time.
Install the Tablet Software (On the PC)
After the drivers are installed, the Intel W eb Tablet Setup screen appears.
Note: If the Intel Web Tablet Setup screen does not appear, open My Computer on your desk top. Double-click the CD-ROM
drive, and then double-click
setup.exe.
1 Click Install to begin installing the tablet software. 2 Follow the on-screen instructions to install the software.
42 | INSTALLATION INSTRUCTIONS
Create a Network Code (On the PC)
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the space provided below. You will need this networ k code to set up the tablet.
For more information about creating a network code, click Help on the Setup Wizard screen.
2 If th e PC has m ore than one I nternet connection, choose th e
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and conf irm your pas sword, and t hen click
OK.
Restart Your Computer
When you complete the Setup Wizard, you will be asked to restart your PC.
1Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt. If this is your first time loggin g on, type a user name but no
password and click
OK.
3 W hen restart completes, youll see a Congratulations screen
that displays the network code you created.
Note: If you are an America Online* (AOL*) customer
and you use AOL as your Internet Service Provider (ISP), you must set your AOL preferences to save the passwords for your AOL screen names. Do this before you continue with this installation.
Return to the Tablet and Co mplete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the network code
that you created on the PC and wrote down in the previous section.
The tablet will reset when its setup process completes. This could take some time.
Write your network code here:
INSTALLATION IN STRUCTIONS | 43
Set Up the Tablet Home Buttons
After the tablet resets, you are ready to set up the home buttons for each member of your family. The first person setting up a home button will be asked to fill out a tablet registration for the family.
1 Press a home button. 2 Follow the directions on the screen to set up that home
button for you or a member of your family.
3 When the home page appears, you can begin using the
tablet right away or touch
my page setup to further
customize the page.
Each of your family members can repeat steps 1-3 to set up their own home button.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time. You can use the tablet while it is charging.
44 | INSTALLATION INSTRUCTIONS
Installing the Tablet Into an Existing AnyPoint Wireless Home Network
Use the following steps if this is your first tablet and you already have an AnyPoint Wireless Home Network installed.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Note: If you use the flip stand on the back of the tablet to keep
the tablet upright, make sure t he stand is fully extended.
Install the Tablet Software On Your Home Network Server PC Important:
Because the tablet will use your existing Intel AnyPoint wireless home networking sof tware to commu nicate with the Internet, you need to install the tablet software on your AnyPoint Home Networks server PC.
Note: If you purchased an Intel Web Tablet that includes a
wireless USB adapter, do NOT install the new adapter on the PC. The tablet will use your existing AnyPoint wireless adapter to communicate with the PC.
1 At the PC,
insert the Intel Web Tablet Setup CD into the
CD-ROM drive
. The CD is located inside the back cover of
the Product Guide.
2 From the Windows desktop, open
My Computer and
double-click the CD-ROM drive.
3 Double-click
setup.exe. The Intel Web Tablet Setup screen
appears.
4Click
Install to begin installing the tablet software.
Follow the on-screen instructions to install the software.
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the space provided below. You will need this network code to set up the tablet.
For more information about creating a network code, click Help on the Setup Wizard screen.
2 If the PC has more than one Internet connection, cho ose the
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and confir m your pas sword, and t hen click
OK.
Write your network code here:
INSTALLATION IN STRUCTIONS | 45
Restart Your Computer
When you complete the Setup Wizard, you will be asked to restart your PC.
1Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt. If this is your first time logging on, type a user name but no
password and click
OK.
3 W hen restart completes, yo ull see a Congratulations screen
that displays the network code you created.
Note: If you are an America Online* (AOL*) customer
and you use AOL as your Internet Service Provider (ISP), you must set your AOL preferences to save the passwords for your AOL screen names. Do this before you continue with this installation.
Return to the Tablet and Com plete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the AnyPoint
network code that you wrote down in the previous section.
The tablet will reset when its setup process completes. This may take some time.
Set Up the Tablet Home Buttons
After the tablet resets, you are ready to set up the home buttons for each member of your family. The first person setting up a
home button will be asked to fill out a tablet registration for the family.
1 Press a home button. 2 Follow the directions on the screen to set up that home
button for you or a member of your family.
3 When the home page appears, you can begin using the
tablet right away or touch
my page setup to furth er
customize the page.
Each of your family members can repeat steps 1-3 to set up their own home butt on.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time. You can use the tablet while it is charging.
46 | INSTALLATION INSTRUCTIONS
Installing the Tablet Into an Existing AnyPoint Phoneline Network
Use the following steps if this is your first tablet and you already have an AnyPoint Phoneline Home Network installed.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Note: If you use the flip stand on the back of the tablet to keep
the tablet upright, make sure t he stand is fully extended.
Update the AnyPoint Phoneline Adapter Settings
Before installing the AnyPoint wireless USB adapter, you need to change the AnyPoint Phoneline adapter settings.
Important! You must update the adapter settings on each
computer that is part of the AnyPoint phoneline network. 1 At each computer that is part of your home network, open
the Windows*
Control Panel and double-click the Network
icon. The Network dialog displays.
2 Click the
Configuration tab and locate the TCP/IP -> Intel(R)
AnyPoint USB Phoneline Adapter
in the list of installed
components.
3 Click the AnyPoint adapter to select it, and then click
Properties. The TCP/IP Properties dialog displays.
INSTALLATION IN STRUCTIONS | 47
Install the Drivers (O n t h e PC) Important!
Do not click Cancel on ANY screen in the Add New
Hardware wizard. 1 When the Add New Hardware wizard starts, click
Next to
begin installing the drivers.
2 Select
Search for the best driver for your device and click
Next.
3 If you are prompted for a drive, make sure the
CD-ROM
drive
check box is checked. Click Next twice to install the
drivers.
4Click
Finish. On Windows* 98 systems, you may need to
click
Finish twice.
5 If yo u ar e prompted to restart the PC, click
No. Y ou may be
asked to restart the PC more than once – click
No each time.
Install the Tablet Software (On the PC)
After the drivers are installed, the Intel Web T ablet Setup screen appears.
Note: If the Intel Web Tablet Setup scr een does no t appear, open My Computer on your desk top. Double-click the CD-ROM
drive, and then double-click
setup.exe.
1Click Install to begin installing the tablet software. 2 Follow the on-screen instructions to install the software.
Create a Network Cod e ( On the PC )
1 The Setup Wizard shows several screens and asks you to
create a network code. Write down the network code in the space provided below. You will need this network code to set up the tablet.
For more information about creating a networ k code , cli ck Help on the Setup Wizard screen.
2 I f the PC has mo re than one Intern et connect ion, choo se th e
connection that you want to use with the tablet.
3 If you are prompted for your Internet Service Provider
(ISP) password, enter and confirm your password, and then click
OK.
Restart Your Computer
When you complete the Setup Wizard, you will be asked to restart your PC.
1 Click
Restart Now to complete the PC setup.
2 When the PC restarts, you may receive a Windows logon
prompt. If this is your fi rst time l ogg ing on, type a user name but no
password and click
OK.
3 When restart completes, youll see a Congratulations screen
that displays the network code you created.
Write your network code here:
48 | INSTALLATION INSTRUCTIONS
Note: If you are an America Online* (AOL*) customer
and you use AOL as your Internet Service Provider (ISP), you must set your AOL preferences to save the passwords for your AOL screen names. Do this before you continue with this installation.
Return to the Tablet and Com plete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the network code
that you created on the PC and wrote down in the previous section.
The tablet will reset when its setup process completes. This could take some time.
Set Up the Tablet Home Buttons
After the tablet resets, you are ready to set up the home buttons for each member of your family. The first person setting up a home button will be asked to fill out a tablet registration for the family.
1 Press a home button. 2 Follow the directions on the screen to set up that home
button for you or a member of your family.
3 When the home page appears, you can begin using the
tablet right away or touch
my page setup to further
customize the page.
Each of your family members can repeat steps 1-3 to set up their own home button.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time. You can use the tablet while it is charging.
INSTALLATION IN STRUCTIONS | 49
Installing Additional Tablets
Use the following steps if you already have an Intel Web Tablet installed in your home and you are adding a new tablet.
Note: If you purchased an Intel Web Tablet that includes a
wireless adapter, do NOT install the new adapter o n the PC. The tablet will use your existing wireless adapter to communicate with the PC.
Begin Charging the Tablet
1 Remove the plastic pull-tab from the battery case on the
rear of the tablet.
2 Plug the AC adapter into the wall. Open the tablet access
panel and plug the AC adapter into the tablet AC power jack.
3 Leave the tablet connected to AC power so it can begin
charging while you complete the tablet setup. The entire installation process takes appr oxi mate ly 45 mi nut es .
Get Your N etwork Co de From the PC
1 At the PC, open the Windows Control Panel, then double-
click the
Wireless Control Panel icon. The Wireless Control
Panel dialog displays.
2 Write down the network code in the space provided below.
You will need this network code to set up the tablet.
3 Close the Wireless Control Panel dialog.
Return to the Tablet and Complete the Installation
1 Return to the tablet and leave it connected to AC power
while you set it up.
2Touch
Continue and follow the instructions on the tablet
screen.
3 When prompted for a network code, use the AnyPoint
network code that you found on the PC and wrote down in the previous section.
The tablet will reset when its setup process completes.
Important! We recommend that you leave the tablet plugged in
for 6 hours to completely charge the batteries for the first time.You can use the tablet while it is charging.
Register Your New Tablet
After the tablet resets, it is ready for use. The first time you press a home button, youll be asked to register your new tablet.
Accessing Your Home Page From the New Tablet
The home buttons on the new tablet will match the home buttons on your existing tablet(s). Use the same home button on each tablet to access your personal home page. For example, if your home button is the green one, use the green button on any of your tablets to access your home page.
Only one tablet can use a particular home button at any given time. If you press a home button and someone is already using that button on another ta bl et, you ll receive a m essage notifying you that another tablet is using that button.
Write your network code here:
50 | INSTALLATION INSTRUCTIONS
Removing and Reinstalling the Tablet PC Software
If the tablet software on the PC becomes damaged, you may need to reinstall the tablet software. In some cases, you can reinstall the software over the existing installation. In other cases, you may need remove the software first, and then reinstall a fresh copy.
Remove the tablet PC software
1 At the PC, open the Windows Start menu and select:
Programs > Intel Web Tablet > Uninstall Tablet Software
The Remove Tablet Software dialog displays.
2 Select the software you want to remove:
Make sure the
Remove Intel Web Tablet software
check box is selected.
If this PC is part of an AnyPoint home network, clear the
Remove Intel AnyPoint Home Networking software
check box. Otherwise, leave this check box selected.
3Click
Remove. The PC will begin removing the tablet
software from the PC. If yo u are prompted to remove any shared files, click
Yes.
4 When the software removal completes, click
Restart. After
the PC finishes restarting, use the following steps to reinstall the tablet software.
Reinstall the tablet PC software
1 At the PC, insert the Intel Web Tablet Setup CD into the
CD-ROM drive. The CD is located inside the back cover of the Product Guide.
2 From the Windows desktop, open
My Computer and
double-click the CD-ROM drive.
3 Double-click
setup.exe. The Intel Web Tablet Setup screen
appears.
4Click
Install to begin installing the tablet software. Follow
the on-screen instructions to install the software. The Setup Wizard sh ows several s creens, and d isplays your
AnyPoint wireless home netw or k co de. This is the network code that is currently set up on the tablet.
When you complete the Setup W izard, you will be asked to restart your PC.
5Click
Restart Now to complete the PC setup.
When the PC restarts, you may receive a Windows logon prompt. If this is your first time logging on, type a user name but no password and click
OK.
6 When the restart completes, youll see a Congratulations
screen that displays your network code.
INSTALLATION IN STRUCTIONS | 51
Restore Your Tablet Registration Note:
These steps are required only if you r emoved the tablet PC
software and then reinstalled it. 1 Go to the tablet and press one of the home buttons. Two
introductory help pages display, followed by the Tablet Registration page.
2 On the tablet registration page, touch the
Touch here to
restore your registration information link (located in the
upper, right section of the page).
3 Follow the instructions on the Restore Registration page to
restore your tablet registration, then touch
Finish.
52 | INSTALLATION INSTRUCTIONS
Troubleshooting Installation Problems
If you exit Set up before all step s are completed...
If you exit Setup before all of the installation steps are complete, you can continue the installation later. T o restart installation at a later time:
1 Place the In tel Web Table Setup CD into your CD-ROM
drive.
2 At the Windows de sk top, go to
My Computer and double-
click the CD-ROM Drive
3 Double-click
setup.exe.
Setup will begin at the point where you exited. Follow the instructions on the screens to complete the setup.
If you receive Dial-up Networking errors...
If you receive the following error during setup:
You have Dial-up Netw orking installed but it is not configured to use any ISPs. Please configure Dial-up Networking before running the connection wizard again.
Do the following: 1 Follow the instructions from you Internet Service Provider
(ISP) to set up your PC Internet connection.
2 After the connection is set up and working, open the
Windows
Start menu, and then select Prog ra ms > I ntel W eb
Tablet > Tablet Connection W izard
. The Intel Web Tablet
Connection Wizard displays.
3 Follow the directions on the Wizard screens to set up the
tablet to use your dial-up connection.
INSTALLATION IN STRUCTIONS | 53
If setup detects more than one adapter on the PC...
If you receive an error message telling you that the PC has more than one adapter, it mean s the PC has a networ k adap ter with an IP address that conflicts with the AnyPoint adapter.
Before continuing with setup, do the following to identify and correct the conflict:
1 Write down the name of the network adapter(s) listed in the
error message.
1 Click the
Exit Setup button.
2 Open the Windows
Start menu and select Run.
3 In the text box, type:
winipcfg
and then click OK. The IP Configuration dialog displays
4 Open the selection list, and select each of the adapters that
you wrote down in step one. If any of these adapters have an IP address beginning with 169.254, use the following steps to change its IP address before continuing with tablet setup.
5Click
OK to close the IP Configuration dialog.
6 Open the Windows
Control Panel and double-click the
Network icon. The Network dialog displ ays.
7 Click the
Configuration tab and locate the network adapter
you identified in step 4.
8 Click the adapter to select it, and then click
Properties. The
TCP/IP Properties dialog displays.
9 Click the
IP Address tab.
10 Select the
Specify an IP ad dress radio button, and then
enter the following values:
IP Address: 192.168.168.1 Subnet Mask: 255.255.255 . 0
11 Click OK twice to close the Network dialog. 12 If you are prompted to restart the computer, click
Yes.
Note: If the adapter you updated is part of a home network, the
IP addresses of all computers on the networ k must be updated to begin with 192.168.168.
You are now ready to continue setting up the tablet PC software.
1 Insert the Intel Web Tablet Setup CD in to the CD-ROM
drive.
2 Open the Windows
Control Panel.
3 Double-cl ick the CD-ROM drive, and then double-click
setup.exe.
4 The setup program will continue where it left off. Follow
the instructions on the installation poster to complete setting up the tablet.
54 | GETTING HELP
GETTING HELP
Online Help and Quick Tour
If you have questions regarding your tablet, use the tablet’s online
Info Center . At the Info Center, youll find a variety of
information, including:
Answers to our custome rs most frequently asked questions.
A Quick Tour of the tablet.
An online User Guide containing topics on how to use the
tablet and perform tablet tasks.
Information about technical issu es.
T o access the Info Center from the tablet, touch the link on your home page. If you cant get to the Info Center using the tablet, use your PC Internet browser to go to:
www.intel.com/home/webtablet/support
To learn more about a specific tablet panel, touch the help button on the panel. This context help provides information about the features that are available on the panel and how they work.
Contacting Customer Support
Our customer support team wants to hear from you. Touch the
Contact Us link at the bottom of your home page or at the Info
Center to send your ideas and suggestions or to submit a problem report. You can call our customer support group toll free at (877) 777-2203 or email us at
Webtablet_support@intel.com.
Troubleshooting
Low or bad wireless signal
Distance from the PC’s wireless adapter and interference from household appliances (cordless phones, microwave ovens, remote controls) are the most common reasons for low or bad signals. To achieve a stronger signal, try the following:
Move the tablet closer to the PC.
Raise the tablets antenna.
Change the location of the PCs wireless adapter—move it
to a high point, like a shelf.
Rotate the PCs wireless adapter to different positions.
Move the location of the appliance that is causing the
interference or turn the appliance off.
Low battery
A low battery warning message indicates that the charge in your tablets battery is running low.
T o recharge the battery , conn ect the AC adapter directly to the tablet, or connect the AC adapter to the charging cradle and set the tablet into the cradle.
Leave the tablet plugged in for at least six hours to fully charge the battery. You can continue to use the tablet while it is recharging.
INDEX | 55
INDEX
A
AC power adapter
9, 11, 16, 37
access panel 9, 37 adding a favorite 10 adding a tablet 28, 50 antenna 9, 37 AnyPoint home network
wireless network
23, 45
B
back/forward button
9, 37
battery 12, 16, 38, 55 battery charge 11 battery cover 9, 37 blank or partially-loaded web pages 17 button bar 10
C
charging cradle
9, 11, 16, 37
cleaning and maintaining the touch screen 12, 38 connecting to the Internet 4 control panel 10 controls button 10 customer support
contacting
46
phone number 16, 55 web site 16, 55
customized web experience 3
E
email
13
F
favorites button
10
favorites list 13 favorites panel 10 flip stand 9, 37
frequently asked questions 16, 55
G
going places on the web
13
H
hanging up the phone line
from the PC
14, 39
from the tablet 14, 39
in an emergency 14, 39 help 10, 16, 55 help button 10 history list 13 home buttons 9, 13, 37 home page 13 horizontal scroll arrows 10
I
Info Center
13, 16, 55
installation instructions 19, 41 Intel AnyPoint Wireless Home Network 4 Internet connection 4
always connected Internet connection 14, 39
dial-up Internet connection 14, 39
security 6
K
keyboard
attaching a PS/2 keyboard
9, 11, 33, 37
keyboard jack 9, 11, 37
keyboard requirements 33
on-screen keyboard 11 knowing who is using the tablet 10
56 | INDEX
L
loading bar
10
lock icon 10 low battery 16, 55 low or bad signal 16, 55
M
multiple tablets
5, 28, 50
my page setup 13
N
network code
6
O
on/off controls
10
online help 16, 55 on-screen keyboard 11 ordering accessories or replacement parts 3, 12, 38
P
parental control
6
PC requirements 33, 35 power jack 9, 37 print button 9, 11, 37 privacy 6 progress indicator 10 proxy settings 6
Q
quick tour of the tablet
16, 55
R
reload button
10
requirements 33, 35 reset button 9, 37
S
screen saver
11
scroll arrows 10 scroll wheel 9, 37
searching the web 13 secure site 10 secure transactions 6 security 6 setting up your home page 13 software updates 15, 40 stop button 10 stylus 9, 37 stylus tether anchor 9, 37 suggestions 3
T
tablet care
12, 38
tablet diagrams 8, 36 tablet neighborhood 13 tablet news 3 technical issues 16, 55 touch screen 9, 12, 37, 38 touch screen accuracy 17 touch screen brightness and contrast 10 troubleshooting 16, 55 turning the screen saver on and off 11 turning the tablet on and off 10 typing with the tablet 11
U
URL
10
using multiple tablets 5 using the tablet 2 using your tablet with your PC 5
V
volume control
10
INDEX | 57
W
web address
10
web content
going places on the web
13
keeping content fresh 15, 40
tablet neighborhood 13 web panel 10, 13 web/search button 10 wireless network code 6 wireless signal strength 11
CONTACTING CUSTOMER SUPPORT
When you need help...
Contact our cu stomer support group.
From the tablet:
T o uch the Info Center link on your home page or neighborhood pages. To send feedback or submit a problem report, touch the
Contact Us link at the bottom
of your home page.
From your PC web browser:
Go to: www.intel.com/home/webtablet/support
Or call our customer support group toll free at (877) 777-2203.
Loading...