Integra DPS-5.2 User Manual

Download

Page 1

DVD Player

DPS-5.2

Contents

Before Using Your DVD Player 2

Getting Started

Instruction Manual

Basic Playback

Advanced Playback

Thank you for purchasing the Integra DVD Player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Player. Please retain this manual for future reference.

Function Setup

Others

Page 2

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safeguards

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

AVIS

RISQUE DE CHOC ELECTRIQUE

OUVRIR

NE PAS

1. Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions

should be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should

be followed.

5. Cleaning – Unplug the appliance from the wall outlet before

cleaning. The appliance should be cleaned only as recommended by the manufacturer.

6. Attachments – Do not use attachments not recommended by

the appliance manufacturer as they may cause hazards.

7. Water and Moisture – Do not use the appliance near water –for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories – Do not place the appliance on an unstable cart,

stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

10. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. The appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 5 cm (2 in.) and an opening behind the appliance.

11. Power Sources – The appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

12. Grounding or Polarization – The appliance may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

PORTABLE CART WARNING

S3125A

13. Power-Cord Protection – Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

14. Lightning – For added protection for the appliance during a

lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.

15. Overloading – Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry – Never push objects of any kind into

the appliance through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

17. Servicing – Do not attempt to service the appliance yourself as

opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service – Unplug the appliance form the

wall outlet and refer servicing to qualified service personnel under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the

appliance,

C. If the appliance has been exposed to rain or water,

D. If the appliance does not operate normally by following the

operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation,

E. If the appliance has been dropped or damaged in any way,

and

F. When the appliance exhibits a distinct change in

performance – this indicates a need for service.

19. Replacement Parts – When replacement parts are required, be

sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

20. Safety Check – Upon completion of any service or repairs to

the appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operation condition.

21. Wall or Ceiling Mounting – The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

22. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Page 3

Precautions

This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the laser beam, do not try to open the enclosure.

CAUTION:

VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

For U.S. model

The laser is covered by a housing which prevents exposure during operation or maintenance. However, this product is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the Food and Drug Administration. According to their regulations 21 CFR section 1002.30, all manufactures who sell Laser Products must maintain records of written communications between the manufacturer, dealers and customers concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this product, please feel free to write to the address on the back page of this manual. When you write us, please include the model number and serial number of your unit.

In compliance with Federal Regulations, the certification, identification and the period of manufacture are indicated on the rear panel.

FCC INFORMATION FOR USER

CAUTION:

The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The label on the right is applied on the rear panel except for USA and Canadian models.

1. This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.

“CLASS 1 LASER PRODUCT ”

For Canadian model

NOTE: This class B digital apparatus complies with Canadian

ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modele pour les Canadien

REMAQUE: Cet appareil numérique de la classe B est conforme

à la norme NMB-003 du Canada.

Sur les modeles dont la fiche est polarisee:

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

Page 4

Precautions

1. Regional Restriction Codes (Region Number)

Regional restriction codes are built into DVD Players and DVDVideo media for each sales region. If the regional code of the DVD Player does not match one of the regional codes on the DVD-Video, playback is not possible. The regional number can be found on the rear panel of the DVD

Player. (e.g. 1 for Region 1)

2. About This Manual

This manual explains the basic procedures for operating the DVD Player. Some DVD-Video discs do not support the full potential of the DVD technology. Your DVD Player may therefore not respond to all operating commands. Refer to instruction notes on discs.

A “ ” mark may appear on the TV screen during operation. It means that the operation is not permitted by the DVD Player or the disc.

3. Recording Copyright

Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

4. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where the unit will be used meets the required voltage (e.g., AC 120 V, 60 Hz) written on the rear panel.

5. Do not touch the unit with wet hands

Do not handle the unit or power cord when your hands are wet or damp. If water or any other liquid enters the case, take the unit to an authorized service center for inspection.

6. Location of the unit

• Place the unit in a well-ventilated location. Take special care to provide plenty of ventilation on all sides of the unit especially when it is placed in an audio rack. If ventilation is blocked, the unit may overheat and malfunction.

• Do not expose the unit to direct sunlight or heating units as the unit’s internal temperature may rise and shorten the life of the pickup.

• Avoid damp and dusty places and places directly affected by vibrations from the speakers. In particular, avoid placing the unit on or above one of the speakers.

• Be sure the unit is placed in a horizontal position. Never place it on its side or on a slanted surface as it may malfunction.

• When you place the unit near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the unit away from the TV, radio, or VCR.

7. Care

From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solution of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since these could damage the finish or remove the panel lettering.

8. Notes on Handling

• When shipping the unit, use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long time. They will leave marks on the finish.

• The top and rear panels of the unit

a long period of use. This is not a malfunction.

• When the unit is not in use, be sure to remove the disc and turn off the power.

• If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally.

may become warm after

9. To Obtain a Clear Picture

The unit is a high technology, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.

10. Notes on Moisture Condensation

Moisture condensation damages the unit. Please read the following carefully.

• What is moisture condensation?

Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside the unit, one of the most crucial internal parts of the unit.

• Moisture condensation occurs in the following cases.

– When you bring the unit directly from a cold place to a

warm place.

– When you use the unit in a room where you just turned on

the heater, or a place where the cold wind from the air conditioner directly hits the unit.

– In summer, when you use the unit in a hot and humid place

just after you move the unit from an air conditioned room.

– When you use the unit in a humid place.

• Do not use the unit when moisture condensation may occur.

If you use the unit in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the unit to the wall outlet, turn on the unit, and leave it for two or three hours. After a few hours, the unit will have warmed up and evaporated any moisture. Keep the unit connected to the wall outlet and moisture condensation will seldom occur.

Page 5

Notes on Discs

This section shows you how to handle, clean, and store discs.

Playable Discs

This DVD Player can playback the following discs.

Disc mark

DVD videos

VIDEO CDs

*1 *1

Audio CDs

*1This unit can play CD-R and CD-RW discs recorded in CD

Audio or Video CD format, or with MP3 audio files.

• You cannot playback discs other than those listed above.

• You cannot play discs such as CD-ROM, DVD-RAM, DVD-

RW, etc., even if the marks in the above table are labeled on those discs.

• This DVD Player uses the PAL/NTSC color system, and cannot playback DVD videos recorded in any other color system (SECAM, etc.).

• Avoid using heart-shaped or octagonal discs. Playing irregularly shaped discs may damage the internal mechanism of the DVD Player.

• Do not use discs that have residue from adhesive tape, rental discs that have peeling labels, or discs that have custom labels or stickers. Otherwise, you may not be able to eject the discs or the DVD Player may become inoperative.

The Structure of the Disc Content

DVD-Video

Normally, the contents of DVD-Video are divided into titles, and the titles are subdivided into chapters.

Title 1

Chapter 1

Chapter 2

Chapter 1

Title 2 Chapter 2

Chapter 3

About VIDEO CDs

This DVD Player supports VIDEO CDs equipped with the PBC (Version 2.0) function. (PBC is the abbreviation of Playback Control.) You can enjoy two playback variations depending on the type of disc.

• VIDEO CD not equipped with PBC function (Version 1.1)

Sound and movies can be played on this DVD Player in the same way as an audio CD.

• VIDEO CD equipped with PBC function (Version 2.0)

In addition to operation of the VIDEO CD not equipped with the PBC function, you can enjoy playback with interactive software and search function using the menu displayed on the TV screen (Menu Playback). Some of the functions described in this Instruction Manual may not work with some discs.

MP3 compatibility information

• The CD-ROM must be ISO 9660 compatible.

• Files should be MPEG1 Audio Layer 3 format, 44.1 or

48kHz, fixed bit-rate. Incompatible files will not play and

“UNPLAYABLE MP3 FORMAT” will be displayed.

• Not compatible with variable bit-rate (VBR) files.

• This system only plays tracks that are named with the file extension “.mp3” or “.MP3”.

• This system is not compatible with multi-session discs. If

you try an play a multi-session disc, only the first session will be played.

• Use CD-R or CD-RW media for recording your MP3 files. The disc must be finalized in order to play.

• Audio encoded at 128Kbps should sound close to regular audio CD quality. Although this system will play lower bitrate MP3 tracks, the sound quality becomes noticeably worse at lower bit-rates.

• Only the first 8 characters of folder and track names (excluding the “.mp3” extension) are displayed.

• This system can recognize a maximum of 250 folders and 250 tracks. Discs containing more than 250 folders or tracks will not play.

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission. DVD videos are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Video CD/CD

Video CD and CD are divided into tracks.

Track 1 Track 2

Track 3

Track 4 Track 5

Page 6

Notes on Discs

Handling Discs

• Do not touch the playback side of the disc.

Playback side

• Do not attach paper or tape to discs.

Cleaning Discs

• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth. Always keep the disc clean.

• If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.

• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray for vinyl LPs. It may damage the disc.

Storing Discs

• Do not store discs in a place subject to direct sunlight or near heat sources.

• Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.

Page 7

Table of Contents

Important Safeguards/Precautions/Notes on Discs/Table of Contents ............. 2–7

Getting Started

Features/Supplied Accessories ............................................................................. 8

Preparing the Remote Controller .......................................................................... 9

Index to Parts and Controls ................................................................................ 10

Connecting to a TV ............................................................................................. 13

Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) ......

Connecting the Power/Turning on the DVD Player ............................................. 15

Setting Up the Player .......................................................................................... 16

Basic Playback

Getting Started Using Your DVD Player .............................................................. 19

Advanced Playback

Still Frame/Slow Play .......................................................................................... 23

Locating a Specific Title/Folder/Chapter/Track/Location ..................................... 24

Repeat Play ........................................................................................................ 26

Random Play ...................................................................................................... 27

Playing in a Favorite Order ................................................................................. 28

Selecting the Camera Angle ............................................................................... 32

Selecting the Audio/Subtitle Language ............................................................... 33

Continuing Playback from a Specified Location (Last Memory) ......................... 34

Memorizing Settings for Often Viewed DVDs (Condition Memory) ..................... 35

Viewing Disc Information..................................................................................... 36

Function Setup

Adjusting Audio and Video Settings .................................................................... 38

Others

Pre-programming remote controller .................................................................... 55

Troubleshooting .................................................................................................. 57

Specifications ...................................................................................................... 59

Page 8

Getting Started

Features/Supplied Accessories

Features

DTS*1/Dolby Digital*2/MPEG2/PCM Digital Audio Outputs Advanced 96-kHz/24-Bit D/A Converters Video CD Capability 27-MHz/10-bit Video D/A Conversion Audiophile-Grade Audio Performance Composite Outputs/Component Video Output High Resolution On-screen Display Full-Function Remote Control Supplied Powerful preprogrammed remote Direct Digital Path Heavy-duty power cord

Supplied Accessories

Make sure your box contains everything listed below. The number of accessories is indicated in brackets.

*1“DTS” and “DTS Digital Surround” are

trademarks of Digital Theater Systems, Inc.

*2Manufactured under license from Dolby

Remote controller (RC-451DV) [1] Batteries (size AA/UM-3) [2]

z cable [1]

S-video cable [1]

Audio/video connection cable [1]

Power cord [1]

Page 9

Preparing the Remote Controller

Inserting the Batteries

1 Open the battery compartment cover.

2 Insert the two R6 (size AA) batteries.

Be sure to match the + and – ends of the batteries with the diagram inside the battery compartment.

3 Close the battery compartment cover.

Using the Remote Controller

Point the remote controller toward the remote control sensor.

Remote control sensor

30˚

About 5 m

Notes

• Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller.

• Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference.

• Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries.

• Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation.

• If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate.

Notes

• Do not mix new batteries with old batteries or different kinds of batteries.

• To avoid corrosion, remove the batteries if the remote controller is not to be used for a long time.

• Remove dead batteries immediately to avoid damage from corrosion. If the remote controller does not operate smoothly, replace both batteries at the same time.

• The life of the batteries supplied is about six months but this will vary depending on usage.

Page 10

Index to Parts and Controls

For operational instructions, see the page indicated in brackets [ ].

■ Front panel

123

Standby/On

Standby

Power

O f f

Last Memory

Repeat

Clear

Random

!@ # $ % ^

1 Power switch and Standby indicator [15]

Turns on the main power supply for the DPS-5.2. The DPS-5.2 enters standby state and the Standby indicator lights up. Pressing the switch again to the off position (—Off) shuts down the main power supply into the DPS-5.2.

• Before turning on the power, make sure all cables are properly connected.

2 Standby/On button [15, 16, 19, 22, 38, 54]

When Standby/On button is pressed to On while the Power switch is set to On, the DPS-5.2 turns on and the Standby indicator turns off. Pressing the button again returns the DPS-5.2 to the standby state.

3 Last Memory button [34]

You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press Last Memory during playback to set a Last Memory point. When you want to resume playback of that disc, press Last Memory in the stop mode and playback starts from the memorized point. Last Memory locations can be stored for up to 5 DVDs and 1 Video CD.

4 Clear button [25-30, 33-35, 49]

Works in conjunction with a number of player functions. Use to cancel repeat and random playback, and to edit programs.

5 Remote control sensor [9]

Point the remote control toward the remote sensor to operate the player.

6 Disc tray [19]

When loading a disc, place discs in the disc tray with the label side facing up.

7 Top Menu button [20, 24]

Press to call up the top menu programmed on the DVD. Depending on the DVD, the top menu may be identical to the DVD menu.

67890-=~

PlayStop

DPS-5.2

Return

Cursor

Push to Enter

Open /Close

MenuTop Menu

Setup

Display

Pause

8 Cursor (2/3/5/∞) button/Enter button

[16, 19, 20, 25, 27-31, 37, 38, 44, 45, 49, 51, 52, 54]

Use 2/3/5/∞ to move through the options on menu screens and to change settings. Use Enter to implement settings selected with the cursor buttons or to set items highlighted in a menu.

9 Menu button [20, 25, 32, 33, 48]

Use to display or close the DVD menu or MP3 Navigator screen.

0 Open/Close button [19, 22]

Press to open and close the disc tray.

- Pause button [23]

Press during playback to pause. Press again to resume playback.

= Stop button [16, 20, 22, 28, 30, 34]

Press to stop playback. Pressing once enables playback to resume from a point shortly before the location where it stopped. Pressing twice causes the disc to return to the beginning of the disc if playback starts again.

~ Play button [19, 21-24, 26-28, 30, 34]

Press to start or resume playback.

! Repeat button [26]

Use to set the repeat mode.

@ Random button [27]

Press to play chapters/tracks in random order.

# Return button [20, 38, 49, 52]

Use to go one menu back (current settings are maintained). Use RETURN when you do not want to change the option setting in a menu.

$ Setup button [16, 38, 39, 54]

Press when the player is in either play or stop mode to open and close the Setup screen.

% Display button [36, 37, 45]

Press during playback to display statistical disc information. Press repeatedly to display different information.

^ 4/¢ button [20, 21]

Press to go back or advance to previous chapters/tracks. Press and hold to perform fast-reverse/fast-forward playback scanning.

Page 11

■ Display

12345 67 89

1 £/8 indicator 2 Inserted disc indicator 3 TITLE indicator 4 Angle icon indicator 5 CHAPTER/TRACK indicator 6 REPEAT indicator 7 REMAIN indicator 8 LAST indicator

■ Rear panel

DVD V C D

D DTS

GUI

RS-232

VIDEO

S VIDEO

TITLE CHAPTER TRACK REMAIN

REPEAT

LAST

COND.

~=-0

9 COND. indicator 0 ŸD indicator

- DTS indicator = GUI (Graphical User Interface) indicator

Indicates an on-screen menu operation is being performed. Onscreen menu helps you set up the player.

~ Multifunctional indicator

(e.g. operating status and error messages)

32145678 9

VIDEO

OUTPUT

COMPONENT

ANALOG OUTPUT

DIGITAL

OPTICAL

OUTPUT

COAXIAL

REMOTE CONTROL

DVD PLAYER

MODEL NO.

DPS-5.2

AC INLET

MONO

1 RS-232 port

This port is to be used in conjunction with an external controller to control the operation of the DPS-5.2 using an external device.

2 VIDEO OUTPUT VIDEO jack [13]

Connect to the video input on a TV or monitor or AV amplifier or receiver with video input capability.

3 VIDEO OUTPUT S VIDEO jack [13]

If your TV or monitor has an S video input, clear picture reproduction is possible by connecting the player to your TV or monitor via the S Video jack. You can switch between [S1] and [S2] S-video output from the Setup menu.

4 VIDEO OUTPUT COMPONENT jacks [13]

If your TV or monitor has component video inputs, you can produce a higher quality picture on your TV or monitor by connecting to the component video outputs on this unit.

5 ANALOG OUTPUT jacks [13, 14]

Use to output two-channel audio (analog) to the audio stereo inputs on a TV or stereo amplifier. If you are connecting to a receiver that has both digital and analog input jacks for DVD player connection, it may be beneficial to make both connections.

6 DIGITAL OUTPUT OPTICAL jack [14]

Use to output the digital audio signal recorded on discs. You can output the digital signal via the optical output jack to an AV amplifier or receiver.

7 DIGITAL OUTPUT COAXIAL jack [14]

Use to output the digital audio signal recorded on discs. You can output the digital signal via the coaxial output jack to an AV amplifier or receiver.

8 z jack [14]

Use to connect this player to another component bearing the z mark. This lets you control this unit as though it were a component in a system.

9 AC INLET [15]

Use to connect the power cord to the wall outlet.

Page 12

Index to Parts and Controls

Remote controller

AUDIO SUBTITLE

ANGLE

COND. M

VOL

ENTER

VOL

STOPPAUSE PLAY

DOWN UPFR FF

451

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

@ # % &

( )

¡ ™ ¢

3 5

1 2 4 6 7

TV ON / STANDBY

STANDBY

LAST M DIMMER DISPLAY

TOP MENU

TV/ VCR

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

1 ON button [15, 16, 19, 22, 38, 55]

Press to switch the player on.

2 STANDBY button [15, 22, 34, 55]

Press to put the player in standby.

3 ANGLE button [32]

Some DVDs are recorded with various camera angle playback options. Press ANGLE repeatedly to display different camera angles.

4 LAST M button [34]

You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press LAST M during playback to set a Last Memory point. When you want to resume playback of that disc, press LAST M in the stop mode and playback starts from the memorized point. Last Memory locations can be stored for up to 5 DVDs and 1 Video CD.

5 COND. M button [35]

You can store in memory the settings for up to 15 DVDs. Press COND. M during DVD playback to memorize the settings.

6 TOP MENU button* [20, 24]

Press to call up the top menu programmed on the DVD. Depending on the DVD, the top menu may be identical to the DVD menu.

7 Cursor buttons (2/3/5/∞)* [16, 19, 20, 25, 28-31, 37, 38]

VOL +/– buttons [55]

Use to move through the options on menu screens and to change settings.

CH +/–, VOL +/– buttons [55]

8 RETURN button* [20, 38, 49, 52]

Use to go one menu back (current settings are maintained). Use RETURN when you do not want to change the option setting in a menu.

TV/VCR button [55]

9 PAUSE 8 button [23]

Press to pause playback of a disc. Press again to resume playback.

0 STOP 7 button [16, 20, 22, 28, 30, 34]

Press to stop playback. Pressing once enables playback to resume from a point shortly before the location where it was stopped. Pressing twice causes the disc to return to the beginning of the disc when playback starts again.

$ ^

∞

- FR/FF 1/¡ buttons [21]

During playback of DVD and Video CD, press ¡ to perform fast forward scanning or 1 to perform fast reverse scanning of DVD and Video CD. When a CD or MP3 is loaded, audio scanning is performed.

= Number buttons (1-9, 0, +10)* [19-21, 24-30, 49, 51, 52, 55]

Use to perform direct title/folder and chapter/track searches, and to input numerical values.

~ RANDOM button [27]

Press to play chapters/tracks in random order.

! REPEAT button [26]

Use to set the repeat mode.

@ 0 button [19, 22]

Press to open or close the disc tray.

# SUBTITLE button [33, 48, 49]

Press repeatedly to select one of the subtitle languages programmed on a DVD or to turn the subtitles off.

$ AUDIO button [33, 47]

Press repeatedly to select one of the audio languages programmed on a DVD. For Video CD, CD and MP3, each press changes the audio output as follows. → Stereo → 1L(Left) → 2/R(Right)

% DISPLAY button [36, 37, 45]

Press during playback to display statistical disc information. Press repeatedly to display different information.

^ DIMMER button [37]

Toggle to control the lightness of the display.

& MENU button* [20, 25, 32, 33, 48]

Use to display or close the DVD menu or MP3 Navigator screen.

* ENTER button*

[16, 19, 20, 25, 27-31, 38, 44, 45, 49, 51, 52, 54, 55]

Use to implement settings selected with the cursor buttons or to set items highlighted in a menu.

( SETUP button* [16, 38, 39, 54]

Press when the player is in either play or stop mode to open and close the Setup screen.

) PLAY £ [19, 21-24, 26-28, 30, 34]

Press to start or resume playback.

_ UP/DOWN 4/¢ [20, 21]

During playback, press 4 to go back to a previous chapter/track and ¢ to advance to the next chapter/track .

+ STEP/SLOW +/– buttons [23]

Press STEP/SLOW + or – during playback to view still frame. Press and hold STEP/SLOW + or – during playback to view slow playback. In still frame, press STEP/SLOW + to advance DVDs and Video CDs frame by frame and STEP/SLOW – to back up a few frames at a time (DVD only).

¡ FUNCTION M button [54]

You can store in memory up to 5 settings. Press FUNCTION M to memorize and recall the settings.

™ CLEAR button [25-30, 33-35, 49]

Works in conjunction with a number of player functions. Use to cancel repeat and random playback, and to edit programs.

£ SEARCH button [24]

Press to perform a title/folder, chapter/track or elapsed time search.

¢ PROGRAM button [25, 28-31]

You can program titles, chapters, or tracks to play back in a desired order. Programs can be a maximum of 24 steps. Additionally, DVD programs for up to 24 discs can be stored in the player’s memory for future use.

∞ A-B button [26]

Press at the beginning and end of the section you want to repeat or to mark a location you want to return to.

§ DVD/TV switch [55]

(Buttons indicated with * are used for menu operation.)

Page 13

Connecting to a TV

Before connecting

• Refer also to the instruction manual of the TV.

• When you connect the DVD Player to the TV, be sure to turn off the

power and unplug both units from the mains before making any connections.

• Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Making component video connections

If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture quality for the presentation of DVD-Video. Using a component video cable (sold separately), connect the VIDEO OUTPUT COMPONENT jacks to the corresponding component video input jacks on the TV. Actual labels for component video inputs may vary depending on the TV manufacturer. (e.g. Y, R-Y, B-Y or Y, C In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

B, CR)

• Connect the plugs securely.

Incomplete

Insert completely

BE sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 16 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 38.

Component video cable

To component video inputs

Active subwoofer

(for powerful bass sound)

: Signal flow

RS-232

VIDEO

S VIDEO

VIDEO

OUTPUT

COMPONENT

ANALOG OUTPUT

MONO

Connecting to a TV Using the Audio/Video Connection Cable

If the TV or monitor has an S video input, make the S video connection. The S video connection will provide higher quality picture playback.

Notes

• If you make the S video connection, leave the yellow plug disconnected.

• If the TV audio is monaural, leave the red plug disconnected.

Stereo audio connection cable

To audio input

DIGITAL

OUTPUT

OPTICAL

COAXIAL

REMOTE CONTROL

DVD PLAYER

MODEL NO.

L (White)

R (Red)

DPS-5.2

Stereo audio/video connection cable

To audio/video inputs

R (Red)

L (White)

Video (Yellow)

S video connection cable

To S video input

AC INLET

DO NOT connect

the mains lead at this time.

Page 14

Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player)

Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on the opposite page, connecting with an amplifier provides you high quality dynamic sounds. To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.

Before connecting

• Refer to the instruction manual of the amplifier.

• When you connect the DVD Player to the amplifier, be sure to turn off the power and unplug both units from the mains before making any connections. Otherwise, the speakers may be damaged.

• Connect the plugs securely.

Incomplete

Insert completely

■ Making a digital connection with the amplifier

If your amplifier has a digital input jack, be sure to connect it to either DIGITAL OUTPUT OPTICAL or COAXIAL jack on the DVD player.

Notes

DO NOT connect to the AC-3RF input (e.g. of a Dolby Digital receiver) which is reserved only for video disc players.

Notes

• The remote controller supplied with Integra/Onkyo amplifier can be used to operate the DVD player.

• The function of the upper and lower z connectors are the same. Connect to either one.

• Connecting z cable only does not make the system operational. You must also connect the audio cables as well.

BE sure to set the digital output setting after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 16 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 38.

Optical fiber connection cable

To Digital optical jack

Coaxial connection cable

To Digital coaxial jack

z cable To z jack

An amplifier with a Dolby Digital/DTS/MPEG1/MPEG2 decoder or 2 channel digital stereo

: Signal flow

RS-232

VIDEO

S VIDEO

VIDEO

OUTPUT

COMPONENT

ANALOG OUTPUT

■ Making the analog connection with the amplifier

If your amplifier has no digital audio input, you can make the analog connection. If the amplifier has a Dolby Pro Logic decoder, you can reproduce the Dolby Pro Logic surround sound.

MONO

DIGITAL OUTPUT

REMOTE

COAXIAL

CONTROL

OPTICAL

DVD PLAYER

MODEL NO.

DPS-5.2

AC INLET

DO NOT connect

the mains lead at this time.

z cable To z jack

Stereo audio connection cable

To audio input

L (White)

R (Red)

An amplifier with no digital connection

Page 15

Connecting the Power/ Turning on the DVD Player

Before connecting

• The DPS-5.2 is shipped with the main power (Power)

switch in the on position (_On). When the power cord is plugged in for the first time, the DPS-5.2 will automatically enter the standby state and the Standby indicator will light (same condition after step 2 below).

• Make sure that all the connections on pages 13 and 14 are complete (the connection to a TV is required).

POWER

STANDBY/ON

Power

Plug the supplied power cord into the AC INLET and then into the power outlet on the wall.

• Do not use a power cord other than the one supplied with the DPS-5.2. The power cord supplied is designed for use with the DPS-5.2 and should not be used with any other device.

• Never have the power cord disconnected from the DPS-5.2 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

AC INLET

To the mains

Press Power to switch on the main power.

The DVD Player enters standby mode.

The Standby indicator lights up.

• The buttons on the remote controller do not operate if the Power switch is set to Off.

• To switch off the main power, press Power again.

Standby/On

Press Standby/On on the DVD Player or ON on the remote controller.

The DVD Player turns on and the Standby indicator turns off.

• To put the DVD Player in the standby mode, press Standby/On on the DVD Player, or STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DVD Player in the standby mode for the next use to avoid sudden loud sound reproduction.

• While the Standby indicator lights up, the DVD Player can receive signals from the remote controller. However, if you press Power on the DVD Player to switch off the main power, the remote controller cannot be used to turn on the DVD Player.

• Setting the STANDBY button to standby does not shut off the power completely.

Page 16

Setting Up the Player

The Setup Navigator has been designed to simplify the process of getting the DVD player ready to perform. Designed as a series of on-screen multiple-choice questions, the Setup Navigator automatically sets the audio, video, and language settings according to how the questions are answered. Once this procedure is complete, it will be possible to begin using the DVD player to enjoy DVDs. The procedure on this page describes the operations necessary to function within the Setup Navigator screens. A detailed description of the contents of each question that appears on the screen can be found on the following pages.

Using the Setup Navigator

SETUP

Press ON (Standby/On on the front panel).

If there’s already a disc loaded and it starts to play, press 7 to stop it.

Press SETUP.

When SETUP is pressed for the first time, the following screen appears. Though the Setup Navigator may be used more than once, this screen only appears the first time SETUP is pressed.

Audio

Language

Video1

Setup Navigator

Setup using the Setup Navigator

Move

General

Start

Auto Start Off

ENTER

Select

SETUP

Exit

Use the cursor buttons (5/∞) to make a selection.

• If you are going to use the Setup Navigator, it is not necessary to change the setting on the first screen. Please proceed to the next step.

• If you do not want to set up the player using the Setup Navigator, use the cursor button (∞) to select [Auto Start Off] at this time. The Setup Navigator function may still be used at a later time in manual Setup screen menu operation (page 38).

■ When setting up for the first time

Some DVDs start playing automatically when loaded in the player. Because the Setup Navigator cannot be used if a disc is playing, it is recommended to set up the player using the Setup Navigator before loading a DVD for the first time. If a DVD has been loaded, be sure to press 7 before proceeding.

■ To change the answer to a prior question

Use the cursor button (2) to return to previous screens. Please note, however, that you cannot go forward using the cursor button (3), so it will be necessary to answer all the questions that occur after the screen that was returned to.

■ To exit the Setup Navigator

Press SETUP while on any of the screens to exit the Setup Navigator. Please note that if the Setup Navigator is exited before all the questions are answered, no settings are changed.

Note

On-screen information (i) appears to clarify the functions and explain the options available.

ENTER

Press ENTER.

The selection is entered and the next Setup Navigator screen appears.

Use steps 3 and 4 as a basis for entering selections on the all of the Setup Navigator screens described on the following pages.

Page 17

5/∞

TV ON / STANDBY

STANDBY

LAST M DIMMER DISPLAY

TOP MENU

RANDOM REPEAT A-B

REMOTE CONTROLLER

AUDIO SUBTITLE

ANGLE

COND. M

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

451

DVD

STEP/ SLOW

FUNCTION M

PROGRAM

SETUPRETURN

CLEAR

ENTER

SETUP

■ Setting the OSD Language (On-Screen Display Language)

The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the player in menus and on-screen messages. Additionally, the language that is established at this setting will also be used for the default audio and subtitle language.

Audio

Settings: English (Factory setting)

Notes

• The languages that can be selected may be different from those

• In addition to setting the [OSD Language], the audio and subtitle

Language

Video1

Setup Navigator

Language

OSD Language

General

English

français Deutsch Italiano Español

Select the On Screen Language

Move

ENTER

Select

SETUP

Exit

français Deutsch Italiano Español

shown above.

language are also set at this time. If you wish to change the audio or subtitle language to a different language, make changes in the Setup screen Language menu [Audio Language] and [Subtitle Language] as needed (pages 47, 48).

■ Setting the TV screen size

The [TV Type] screen establishes the size, or more appropriately the width to height ration of your television or monitor. The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and highdefinition TVs is 16:9. This width-to-height ratio is called the aspect ratio.

Audio

Settings: Widescreen (16:9) (Factory setting)

Note

There are two screen formats that can be used to display wide-screen format DVDs: letter box and pan & scan. When [Standard (4:3)] is selected in the Setup Navigator, the letter box screen format is automatically selected. To switch the preference to the pan & scan format, make changes in the Setup screen Video 1 menu [TV Screen] setting (page 42).

Language

Video1

Setup Navigator

TV Connection

TV Type

Widescreen TV 16:9 aspect raito

Move

Standard (4:3)

General

Widescreen(16:9)

Standard(4:3)

Select

SETUP

ENTER

Exit

Page 18

SETUP

ENTER

General

Language

Audio

Video1

Exit

Move

Select

Changes are saved

Setup Navigator

Exit Setup Navigator

Save Changes

Delete Changes Start Again

Setting Up the Player

Using the Setup Navigator

■ Setting digital audio connections to an AV amplifier or decoder

The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous options available, please refer to the instructions supplied with the component the player is connected to determine what digital audio formats can be decoded. If you have made no digital connections, select [Not Connected].

Audio

Settings: Dolby Digital (Factory setting)

Warning

• Do not set [Digital Jack] to [Dolby Digital/DTS] or [Dolby D/DTS/

• Select [PCM] when you connect the player to a 2 channel digital

Language

Video1

Setup Navigator

Amp Connection

Digital Jack

Compatible with Dolby Digital

Move

General

Dolby Digital

Dolby Digital/DTS Dolby Digital/MPEG Dolby D/DTS/MPEG PCM Not Connected

Select

SETUP

ENTER

Exit

Dolby Digital/DTS Dolby Digital/MPEG Dolby D/DTS/MPEG PCM Not Connected

MPEG] if the amplifier does not have a DTS decoder. If you do so, high volume sound may be output and damage your hearing as well as speakers.

stereo amplifier. If you select other than [PCM], high volume sound may be output and damage your hearing as well as speakers.

■ Confirming the settings

The [Exit Setup Navigator] is the final screen in the Setup Navigator.

Settings: Save Changes (Factory setting)

Select to have the player make all of the necessary audio, video and language settings according to your responses in the Setup Navigator.

Delete Changes

Select to exit the Setup Navigator without changing any of the system settings.

Start Again

Select to return to the [OSD Language] screen of the Setup Navigator and do the settings again.

■ To change other player settings in the Setup screen menus

The procedure for changing the settings in the Setup screen menus is described on page 38.

The [96 kHz PCM Audio] screen establishes whether or not the AV component the player is connected to is capable of processing an audio signal with a sampling rate of 96 kHz. This screen only appears if connections have been made to an external AV component as determined in previous screens.

Audio

Settings: No (Factory setting)

■ Setting compatibility with 96 kHz output

Language

General

Yes Don't Know

ENTER

Select

SETUP

Exit

Video1

Setup Navigator

Amp Connection

96kHz PCM Audio

Digital jack not compatible with 96kHz

Move

Select if the connected AV component cannot process an audio signal with a sampling rate of 96 kHz.

Yes

Select if the connected AV component can process an audio signal with a sampling rate of 96 kHz.

Don’t Know

Select if you are uncertain whether the connected AV component can process an audio signal with a sampling rate of 96 kHz.

Page 19

Getting Started Using Your DVD Player

Before you can start to enjoy the digital audio and video on DVDs, be sure that you have either performed the Setup Navigator procedure described in the previous section or made the necessary settings in the Setup screen menus as outlined in the next section to set up the player to correspond to your home system. Having made these settings, you are now ready to start using the player to enjoy DVDs, Video CDs, CDs and MP3s.

DVD

VCD

MP3

Playing DVDs, Video CDs, CDs and MP3s

Warning

If the DVD Player is connected to the TV or amplifier through the analog audio jacks, do not play DTS-encoded discs. Excessive noise may be output from the analog stereo jacks, which may damage the connected equipment.

To reproduce DTS surround sounds, digital connection to an amplifier with a DTS decoder is needed.

2/3/5/∞

Number buttons

TV ON / STANDBY

ANGLE AUDIO SUBTITLE

STANDBY

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

STEP/ SLOW

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

FUNCTION M

PROGRAM

451DV

OPEN /CLOSE

ENTER

SETUPRETURN

CLEAR

OPEN /CLOSE

Press ON (Standby/On on the front panel).

Press 0.

The disc tray comes out.

Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc.

PLAY

Press £.

• The disc tray closes, and playback begins.

• MP3 only: It may take a few seconds for the player to locate the track on the disc, depending on the complexity of the file structure. During this time,

“Please wait a moment” is displayed.

• Depending on the disc, a menu may be

displayed. If a menu is displayed, proceed to step 5.

■ About the

DVD

VCD, CD

and

MP3

marks in

the pages related to disc operation

DVD

means the function or title is related to DVD-Video operation.

VCD

means the function or title is related to Video CD operation.

means the function or title is related to audio CD operation.

MP3

means the function or title is related to MP3 operation.

Select the item you want to view.

• When a DVD is loaded:

Select the item with the cursor buttons (2/3/5/∞) or the number buttons then press ENTER.

ENTER

• When a Video CD is loaded:

Use the number buttons to select the item.

456

789

Notes

• Noise is output if you make digital audio connections to a receiver or amplifier that does not have a built-in decoder. Check that the digital audio output format selected in the Audio menu corresponds to the audio components you have made connections to (pages 18, 40, 41).

• The TV screen size is factory set to present the wide screen format (16:9 aspect ratio). If you have a standard TV screen (4:3 aspect ratio), this setting can be changed to match your TV screen size in the Video 1 menu (pages 17, 42).

• Do not move the DVD Player during playback. Doing so may damage the disc.

• Use 0 on the remote controller or Open/Close on the DVD Player to open and close the disc tray. Do not touch the disc tray while it is moving. Doing so may cause the DVD Player to malfunction.

• Do not press down on the disc tray or put any objects other than playable discs on the disc tray. Doing so may cause the DVD Player to malfunction.

• In many instances, a menu screen appears when playback of a movie is complete. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press 7 once the movie is complete.

■ When an operation is prohibited

There are times when you are using the player and attempt to perform an operation, but for some reason it cannot be performed. When this occurs, one of the two following icons appears on the screen.

The operation is prohibited by the player.

The operation is prohibited by the programming on the disc.

Page 20

Getting Started Using Your DVD Player

DVD

VCD

When a Menu Screen is Displayed

Menu screens are displayed for DVDs that have menu screens or Video CDs that include Playback Control (PBC). DVDs often contain extra information that can be accessed in the DVD menu and sometimes makes navigating DVD menu screens as enjoyable as watching the feature presentation.

Example: When a DVD that has menu screens is loaded

1 Highlight Clips

2 Chapter List 3 Commercial Header 4 Subtitles 5 Soundtrack 6 Start Main Feature

Example: When a Video CD that has Playback Control is loaded

STANDARD VOCAL BEST

Don't Tekno for an Answer

Bad Whack Naff Riff

dubmyheadbassman

Gooey Love Jingle

Praise the Day

G3, Ba-san

Abstract Jazz Phunk

Rock the Love Jive

Bertie B.& the Goans

Hood in the Boyz

Sleek Machine

Philip William

Formerly an Artist

Pfeuti

John Torn

Hot Monkey Stick

DVD

VCD

To Open or Return To the DVD or Video CD Menu Screen

Although this differs depending on the disc, pressing MENU, TOP MENU, or RETURN during DVD playback or RETURN during Video CD playback displays the menu screen. Refer to the DVD or Video CD disc jacket and accompanying documentation for more information.

■ To play Video CDs without displaying menu screens

Video CDs with Playback Control (PBC) display a menu screen when play is started. It is possible, however, to play back Video CDs without displaying menu screens. When a Video CD with PBC is loaded, press 7, and then the number button of the track you want to play.

■ To navigate a menu screen

• Although individual DVD titles may differ, when a menu

screen is displayed, use the cursor buttons (2/3/5/∞) and ENTER on the remote control. The cursor buttons are used to move around the options on the screen and ENTER is used for selection.

• Occasionally, the number buttons may also be used to make selections. If this is possible, using number buttons serves to directly select an option on a menu screen. Only number buttons are used to make selections on Video CD menu screens.

• When the Video CD has more than one menu, pages can be advanced to or returned to with 4 or ¢.

Page 21

TOP MENU

2/3/5/∞

RETURN

1/¡

TV ON / STANDBY

ANGLE AUDIO SUBTITLE

STANDBY

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

STEP/ SLOW

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

FUNCTION M

PROGRAM

451DV

OPEN /CLOSE

ENTER

SETUPRETURN

£ 4/¢

CLEAR

DVD

VCD

MP3

Chapter (Track) Skip Forward/Skip Back

DOWN

Advancing to the next chapter (track)

Press ¢.

Press to skip forward to the next chapter (track).

Skipping back to the previous chapter (track)

Press 4.

• Press once to skip back to the start of the chapter (track) currently playing.

• Press twice to skip back to the start of the previous chapter (track).

DVD

VCD

MP3

Forward and Reverse Scanning

Fast forward and reverse scanning

Press and hold ¡ or 1 during playback to scan forwards or backwards.

While “¡1” or “1 1” is displayed onscreen blinking, release the button to resume normal playback.

Variable speed scanning

1 Press (but don’t hold) ¡ or 1

during playback to start scanning.

“¡ 1” or “1 1” appears on screen.

2 Depending on the type of disc

playing, you can increase the scanning speed by pressing ¡ or 1.

The scan speed is shown on-screen.

DVD discs have three scanning speeds;

1, 2 and 3.

CD and Video CDs have two scanning speeds;

1 and 2.

MP3 have only one scanning speed.

3 Press £ to resume normal

playback.

Page 22

Getting Started Using Your DVD Player

TV ON / STANDBY

ANGLE AUDIO

STANDBY

LAST M DIMMER DISPLAY

COND. M

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451DV

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SUBTITLE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

DVD

VCD

Resuming playback from where you stopped

Use the resume feature to restart playback from the point that the disc was stopped last time. This features cannot be used with MP3s and CDs.

STOP

PLAY

Press 7 once.

The display shows “RESUME” and the stop position is memorized.

• The resume position remains memorized as long as the disc is in the player — even if you switch the power off.

• Pressing 7 twice causes the disc to return to the beginning when £ is pressed again. The display shows the disc type (DVDs or Video CDs).

Press £.

Playback starts from the resume position.

DVD

VCD

MP3

Stopping Playback and Switching Power Off

STOP

OPEN /CLOSE

Press 7.

Playback stops.

Press 0.

The disc tray comes out.

Remove the disc.

Notes

• The actual restart position may be slightly before or after the resume position.

• If you want to remove the disc, but still want to resume playback from the last stopped position, use the LAST MEMORY feature instead (page 34).

• The memorized resume position is erased when you open the disc tray, or change the Parental Lock Level setting (page 51) or On-screen Display (OSD) setting (page 47).

STANDBY

Press STANDBY (Standby/On on the front panel ).

The disc tray goes back in.

Page 23

Still Frame/Slow Play

The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame.

TV ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

LAST M DIMMER DISPLAY

COND. M

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

STEP/ SLOW

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

FUNCTION M

PROGRAM

451

OPEN /CLOSE

SETUPRETURN

CLEAR

£8

STEP/SLOW +/–

DVD

VCD

Viewing a still frame

PAUSE

STEP/ SLOW

■ Frame by frame advance playback: Viewing one frame at a time

You can’t use frame review with Video CDs.

1 Press 8, STEP/SLOW +/–. 2 Press STEP/SLOW +/–.

STEP/SLOW +: The picture advances one frame each

STEP/SLOW –: The picture backs up a DVD a few frames each

■ To return to normal playback

When viewing a still frame playback, pressing 8 or £ restores normal playback operation.

Notes

• There is no sound when viewing still frames or slow playback, or when advancing one frame at a time.

• Still frame, slow play, or frame advance playback may not be possible with certain titles. In this case, the mark is displayed.

Press 8, STEP/SLOW +/–.

When viewing a DVD, if the paused picture shakes, select the [Field] setting in the Setup screen Video 1 menu [Still Picture] setting as described in the section on page

46.

time the button is pressed.

DVD

VCD

Viewing slow playback

You can’t use slow reverse play with Video CDs.

STEP/ SLOW

■ To return to normal playback

When viewing a slow playback, pressing £ restores normal playback operation.

During still frame playback, press and hold STEP/SLOW +/– during playback.

Press STEP/SLOW +/– repeatedly to change the slow-motion speed.

There are four forward slow-motion play speeds:

3 1/16 3 1/8

1/2 2 1/4 2

There are two reverse slow-motion play speeds:

Slow 1 ↔ Slow 2

Page 24

Locating a Specific Title/Folder/Chapter/ Track/Location

DVD

VCD

MP3

Searching for a Title, Folder, Chapter, Track, or Location on a Disc

This player offers different ways of accessing the information on a DVD, Video CD, CD or MP3. Using SEARCH, you can search for titles or chapters on a DVD, tracks on a Video CD, CD or folders or tracks on a MP3 and even select the point in time to start playback.

456

789

Press SEARCH repeatedly to select the type of search.

The type of search changes which each press as follows.

DVD

3 Title 3 Chapter

Off 2 Time 2

Video CD

3 Track 3 Time

Off 2

3 Track 3 Off

MP3

3 Folder 3 Track

Off 2

Press the number button(s) of the desired title, chapter or track or of the specific time where you would like to begin playback.

• To select number 3, press 3.

• To select number 10, press 1 and 0.

• To select number 87, press 8 and 7.

When performing a time search:

• To select 21 minutes, 43 seconds, press 2, 1, 4, and 3.

• To select 1 hour, 14 minutes, press 7, 4, 0, and 0.

Notes

• For some discs, selection can be made using the top menu on the DVD. In this case, press TOP MENU to display the menu screen and then make your selection.

• With some DVDs, the search operation may not be possible and may stop shortly after being performed. In this case, the mark is displayed.

• Time search is not possible with CDs and MP3s.

• When performing DVD or Video CD time search, playback may

start from a slightly different time than that specified.

• Time search is not possible during when the disc is stopped.

• Search using time search is not possible during PBC playback of

Video CDs.

■ To perform a direct title or chapter/track search using the number buttons

• Press the number buttons while the disc is stopped to select a title or track number.

• Press the number buttons while the disc is playing to select a chapter or track number.

• To select number 3, press 3.

• To select number 10, press 1 and 0.

• To select number 37, press +10, +10, +10 and 7.

PLAY

Press £.

Playback of the selected title, folder, chapter or track starts. When a time search is performed, playback begins at the appointed time.

Page 25

MP3

Using the MP3 Navigator

TOP MENU

2/3/5/∞

Number buttons

TV ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451DV

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

MENU ENTER

CLEAR SEARCH PROGRAM

Use the MP3 Navigator to make searching for the track(s) you want to play easier. You can also use it to add or clear tracks from the program list.

Load a CD-ROM containing MP3

tracks.

Press MENU to enter the MP3 Navigator screen.

The left side of the screen shows a list of folders containing MP3 tracks.

Total number of Track

Track

1.T_001

2.T_002

3.T_003

4.T_004

5.T_005

Play

Track

1.TRACK1~1

2.TRACK2~2

3.TRACK3~3

4.TRACK4~4

PlayClear

MP3 Navigator

Exit

MP3 Navigator

1~41~10

SETUPENTERCREAR

Exit

Folder

1.FOLDER_1

2.FOLDER_2

3.FOLDER_3

4.FOLDER_4

5.FOLDER_5

ENTER

Total number of Folder

If you display the MP3 Navigator when a disc is playing, the currently playing folder and track numbers are shown at the top left of the screen.

On the right side is a list of MP3 tracks from the first title in the list.

Current : 3 1-1

Folder

1.FOLDER~1

2.FOLDER~2

3.FOLDER~3

4.FOLDER~4

5.FOLDER~5

6.FOLDER~6

■ Navigate using the following controls:

Cursor buttons (2/3) Select folder and tracks from the

current screen.

Cursor buttons (5/∞) Select the previous/next of folders

and tracks. To move rapidly up or down a long list of folders or tracks, press and hold the Cursor buttons (5/∞).

ENTER Play the currently selected folder or

track. MP3 tracks that are unplayable on this system are automatically skipped and the display shows “UNPLAYABLE MP3 FORMAT”.

MENU Exit the MP3 Navigator

PROGRAM Add the currently selected track to

the program list. (Tracks in the program list are marked Pressing PROGRAM repeatedly will add the track to the program list repeatedly.

See ‘Programming MP3s’ on page 29 for how to use program play.

CLEAR Clear the currently selected track

from the program list.

Page 26

Repeat Play

You can repeat an entire title, folder, chapter or track, or just a part.

REPEAT

TV ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451DV

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

CLEAR

A-B

DVD

VCD

MP3

Repeating a Title, Folder, Chapter or Track

REPEAT

Repeat play of a chapter/track

Press REPEAT once during playback of the chapter or track you want to repeat.

Repeat play of a title/folder

Press REPEAT twice during playback of the title you want to repeat.

Repeat play of a disc

VCD

Press REPEAT twice during playback of the disc you want to repeat.

MP3

Press REPEAT three times during playback of the disc you want to repeat.

DVD

VCD

Repeating a Specific Segment

A-B

■ To cancel A–B repeat play

Press CLEAR. Playback continues, but the repeat function is canceled.

Repeat play of a specified section

Press A–B at the beginning and end of the section you want to repeat.

• When A–B is pressed a second time, the disc returns to the location where A– B was pressed first and plays the selected section repeatedly.

• You can only perform A–B repeat within the same title, chapter, or track.

Return to a specified location on a disc

1 Press A–B at the desired

location.

2 When you want to return to the

specified location, press £.

■ To repeat a program

Press REPEAT once during program playback to repeat the program.

■ To cancel repeat play

Press CLEAR. Playback continues, but the repeat function is canceled.

■ To clear the specified location

Press CLEAR to cancel repeat play or to clear the specified location that was set using A–B.

Notes

• With some DVD discs, there may be times when repeat playback is not possible. In these cases, the mark will appear on the screen.

• With Video CDs, repeat play is not possible when the menu is displayed (PBC playback). To perform repeat play, start playback without displaying a menu by pressing the track number to be repeated when the disc is stopped, and then press REPEAT.

• You cannot use A-B repeat when listening to an MP3.

• If you switch camera angle during repeat play, repeat play is

cancelled

Page 27

Random Play

Play titles, chapters, or tracks on a disc in random order.

DVD

VCD

MP3

Playing in Random Order

RANDOM

ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

LAST M DIMMER DISPLAY

COND. M

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

ENTER

£ 4/¢

CLEAR

RANDOM

ENTER

PLAY

Random playback of chapters within one title

Press RANDOM once, then press ENTER or £.

“Random Chapter” appears on the screen, and chapters within the title will be played back in random order.

Random playback of titles

Press RANDOM twice, then press ENTER or £.

“Random Title” appears on the screen, and titles will be played back in random order.

Random playback of tracks

Press RANDOM.

“Random” appears on the screen, and random playback begins.

■ To change titles, chapters, or tracks during random play

• Press ¢ or RANDOM and the next randomly selected title, chapter, or track starts playing.

• Press 4 and playback of the current title, chapter, or track starts again from the beginning.

■ To stop random play

Press CLEAR. This returns you to normal playback of chapters/tracks in order from the chapter/track currently playing.

Notes

• With Video CDs, random play is not possible during playback when the menu is displayed (PBC playback). To perform random play, start playback without displaying a menu by pressing a track number button while in the stop mode, and then press RANDOM.

• Random play of programmed chapters/tracks is not possible.

• In the case of DVDs, random playback may not be possible with some discs.

• Repeat playback of random playback is not possible. In these cases, the mark will appear on the screen.

Page 28

Playing in a Favorite Order

The titles and chapters within a title on a DVD and similarly MP3, CD and Video CD tracks can be arranged to play in the order you want. With this player, it is possible to make a program as you watch a DVD or Video CD or while listening to an MP3 or a CD .

DVD

Programming DVDs

A program with a maximum of 24 steps can be memorized.

PROGRAM

Press PROGRAM.

The Program screen appears.

Program Chapter Program Title

Current:

Program Memory Off

Move

2(/20)

Titl e

PROGRAMENTER

Play

Exit

Program Chapter Program Title

Titl e

Current:

Titl e

Program Memory Off

Move

Chapter

(Chapter 1~18)

PROGRAMENTER

Play

Use the cursor buttons (2/3) to select either [Program Chapter] or [Program Title].

Once the program type is selected. Use the cursor button (∞) to enter the program window.

When [Program Chapter] is selected, you must also select what title the chapters to be programmed are in. Use the cursor button (5) to highlight “Title” and then use the number buttons to enter the title number to be used.

456

789

In the program window, use the number buttons to enter the numbers of the titles or chapters in the order you want to program them in.

• To program DVD titles/chapters 9, 7, and 18 in order, press 9, 7, +10 and 8.

Exit

Program Chapter Program Title

Title

Current:

Title 09 07 18

Program Memory Off

Move

Chapter

(Chapter 1~18)

PROGRAMENTER

Play

Program Chapter Program Title

Title

Current:

09 07

Program Memory Off

Move

2(/20)

PROGRAMENTER

Play

■ To program a pause in a program

Press 8 instead of a number button.

“8” appears on the screen and the pause can be programmed. A pause cannot be programmed as the first or last position in a

program, and two or more pauses cannot be programmed in succession.

■ To delete a number:

Exit

Use the cursor buttons (5/∞/2/3) to highlight the incorrect number and then press CLEAR.

The number is deleted. If the number was before another number, the later numbers are reordered automatically.

■ To insert a number:

Use the cursor buttons (5/∞/2/3) to highlight the number to be placed after the new number and then press the number button(s) of the number to be inserted.

The new number is inserted before the previously selected number.

■ To stop program play

Press 7.

Notes

• When programming chapters, chapters not programmed may appear on the screen. This is not a malfunction.

• Programming may not be possible with certain DVD discs. On these types of discs, the mark will appear on the screen when programming is attempted.

• Only chapters within the same title can be programmed during chapter programming.

Exit

ENTER

PLAY

Press ENTER or £.

• Playback starts in the set order.

• Press PROGRAM to return to the

previous display. The program will not begin until £ is pressed.

Page 29

COND. M

TV ON / STANDBY

FUNCTION M

456

789

TV/ VCR

VOL

LAST M DIMMER DISPLAY

ANGLE AUDIO SUBTITLE

TOP MENU

SETUPRETURN

STOPPAUSE PLAY

DOWN UPFR FF

CLEAR

PROGRAM

DVD

RANDOM REPEAT A-B

STEP/ SLOW

REMOTE CONTROLLER

451

ENTER

STANDBY

OPEN /CLOSE

2/3/5/∞

CLEAR

ENTER

PROGRAM

MP3

Programming MP3s

Number buttons

A program with a maximum of 24 steps can be memorized.

PROGRAM

Press PROGRAM to enter the [MP3 Program] screen.

If you added tracks to the program list from the ‘Using the MP3 navigator’ on page 41, the tracks are displayed here.

Total number of folder and track

Folder name

MP3 Program

Folder : 001~25

– – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – –

– – – – – – – – : – – – – – – – –

ENTER PROGRAM

PlayMove

Track name

Exit

From this screen you can enter folder and track numbers directly to build up a program list.

456

789

Use the number buttons to enter a three-digit folder number.

The number of folders on the disc is displayed in the top-left of the screen.

Once you’ve entered a valid folder number, the name of the folder appears.

MP3 Program

Track 001~10

001:– – –– – –:– – –– – –:– – –– – –:– – –

– – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – – – – –:– – –– – –:– – –– – –:– – –– – –:– – –

FOLDER~1 : – – – – – – – –

ENTER PROGRAM

PlayMove

Exit

■ Navigate using the following controls:

Cursor button Navigate the program list.

CLEAR Clear the currently selected item in the

program list.

ENTER Start playing the program list.

PROGRAM Exit the [MP3 Program] screen.

456

789

Use the number buttons to enter a three-digit track number.

The number of tracks in the current folder is displayed in the top-left of the screen.

Once you’ve entered a valid track number, the name of the track appears.

MP3 Program

Folder 001~25

001:008 – – –:– – –– – –:– – –– – –:– – –

– – – – – – – – : – – – – – – – –

Move

ENTER PROGRAM

Play

Exit

Page 30

Playing in a Favorite Order

VCD

Programming Video CDs, CDs

A program with a maximum of 24 steps can be memorized.

PROGRAM

456

789

ENTER

PLAY

Press PROGRAM.

The program screen appears. When a Video CD or CD is loaded, the cursor appears in the program window.

Program Track

Current:

Total Time

Move

Track

1(/10)

0.00

Play

PROGRAMENTER

Exit

Use the number buttons to enter the numbers of the tracks in the order you want to program them in.

• To program tracks 9, 7, and 18 in order, press 9, 7, +10 and 8.

• To edit the program, refer to the procedures on the previous page.

Press ENTER or £.

• Playback starts in the specified track order.

• To stop the program play, press 7.

DVD

VCD

MP3

Additional programming options

After you have made a program, it is then possible to confirm, add, or clear the contents of the program.

■ To confirm the contents of a program:

On a CD or Video CD track program, press PROGRAM to confirm.

The program screen displays the current program.

On a DVD, select the program type (title or chapter) with the cursor buttons (2/3).

The current DVD title or chapter program can then be confirmed on the appropriate program screen.

■ To add to a program:

1 Press PROGRAM. 2 Press a number button to add a new title, chapter, or track

at the end of the program.

3 Press PROGRAM to exit the program screen.

■ To delete a program:

1 Press PROGRAM. 2 Select the program with the cursor buttons (2/3), then

press CLEAR.

3 Press PROGRAM to exit the program screen.

Notes

• The complete program will be deleted even if the disc tray is open or power off (standby).

• Pressing CLEAR when the disc is stopped will clear all programs.

Notes

• To program a pause, or to add or delete a number, refer to the procedures for ‘Programming DVDs’ on page 28.

• You cannot program when playing a Video CD using menu selections (during PBC).

Page 31

Exit

Move

Current:

Title

Program Memory On

Chapter

(Chapter 1~18)

Program Chapter Program Title

Off

PROGRAMENTER

Select

2/3/5/∞

Number buttons

TV ON / STANDBY

ANGLE AUDIO SUBTITLE

STANDBY

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

ENTER

CLEAR PROGRAM

■ To add a title/chapter/track to a program

Press and hold PROGRAM for about 2 seconds.

The current title/chapter/track number appears on-screen together with the program step number. If there isn’t already a program then a new one will be created.

Chapter 07 3 Program 03

■ To confirm the contents of a program:

Press PROGRAM.

Notes

• When using this function to program DVDs, the program being created corresponds to the Program screen (chapter or title) that appears when PROGRAM is pressed. Be sure to check that the appropriate program type is selected.

• You cannot make a program containing chapters in different titles.

■ To save a program in memory

This player can memorize the programs on up to 24 DVDs. By turning the [Program Memory] to [On], the player will save your program and recall it the next time you use the same DVD. When the program memory exceeds 24, programs will be erased in chronological order from the oldest program in memory.

1 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor button (3) to select [On].

2 Press ENTER.

The program is saved in memory.

Note

When a DVD with a program stored in memory is loaded, program playback may start automatically.

■ To erase a program saved in memory

The player erases programs in chronological order when the maximum number of programs that can be held in memory is exceeded. To prevent the player from erasing older programs that you may still use regularly, or when you don’t want to use a program anymore, it is possible to manually erase programs stored in memory.

1 Load a DVD that has a program stored in memory. 2 Press PROGRAM.

The program screen appears.

3 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor buttons (3/∞) to select [Off].

4 Press ENTER.

The program is cleared from memory.

Page 32

Selecting the Camera Angle

COND. M

TV ON / STANDBY

FUNCTION M

456

789

TV/ VCR

VOL

LAST M DIMMER DISPLAY

ANGLE AUDIO SUBTITLE

TOP MENU

SETUPRETURN

STOPPAUSE PLAY

DOWN UPFR FF

CLEAR

PROGRAM

DVD

RANDOM REPEAT A-B

STEP/ SLOW

REMOTE CONTROLLER

451

ENTER

STANDBY

OPEN /CLOSE

ANGLE

You can select a camera angle when viewing DVDs with the multi-angle option.

DVD

Viewing from a Desired Camera Angle (Multi-Angle)

ANGLE

Press ANGLE during playback.

The camera angle changes each time you press the button.

Angle : 1/4

Angle : 2/4

Angle : 4/4

Angle : 3/4

Notes

• You can use the Multi-Angle function only with discs featuring recordings of images shot from different camera angles.

• During Multi-Angle playback, the indicator in the display lights.

• For some discs, selection can be made using the DVD menu. In this case, press MENU to display the DVD menu screen and then make your selection.

• If you change the camera angle during still playback, the DVD player resumes normal playback.

■ To check whether or not a disc is recorded with angles

The jacket of discs that are recorded with angles will be marked with

. When locations on discs that are recorded with angles are played back, the indicator can be displayed. To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup screen Video menu (page 46).

Page 33

Selecting the Audio/ Subtitle Language

TV ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

LAST M DIMMER DISPLAY

COND. M

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

SUBTITLE AUDIO

CLEAR

DVD

Changing the Audio Language (Multi-Language Function)

Dolby Digital, PCM, and other audio data can be recorded on DVDs in a number of languages or audio tracks, letting you choose the desired language or audio.

AUDIO

Notes

• You cannot switch languages if there is only one language recorded on the disc.

• Switching the audio language may not be possible with some titles. In this case, the mark is displayed.

• For some titles, selection can be made using the DVD menu. In these cases, press MENU to display the DVD menu screen and then make your selection.

•

When you erase the resume position or replace a disc, the DVD player returns to the automatic setting in the setting menu (page 47)

■ Changing Audio Type

For enjoyment of karaoke or similar format Video CDs, CDs and MP3s, it is possible to select stereo audio, or either right or left channel mono depending on the requirements of the source.

Press AUDIO repeatedly during playback to switch the audio type.

Audio output changes from [1/L] (Left channel) to [2/R] (Right channel) to [Stereo].

Audio : 1/L

Press AUDIO repeatedly to select the desired language.

Pressing AUDIO once displays the currently selected language. Subsequent presses rotates through the audio languages available on the DVD.

HELLO

Audio : 1 English

Audio : 2/R

Dolby Digital

5.1CH

Audio : 2 Spanish

Dolby Digital

5.1CH

HOLA

DVD

Selecting a Subtitle Language (Multi-Language Subtitles)

You can select a desired subtitle language with DVDs that have subtitle data in multiple languages recorded on them.

SUBTITLE

Notes

• The subtitle language cannot be switched if the subtitle language is not recorded, or if only one language is recorded.

• Switching the subtitle language may not be possible with some discs. In this case, the mark will be displayed.

• To clear subtitles during playback, press SUBTITLE and then press CLEAR, or press SUBTITLE until [Off] appears.

• For some discs, subtitle language selection can be made using the menu on the DVD. In this case, press MENU to display the DVD menu screen and then make your selection.

•

When you erase the resume position or replace a disc, the DVD player returns to the automatic setting in the setting menu (page 48)

Press SUBTITLE repeatedly during playback.

Pressing SUBTITLE once displays the currently selected subtitle language. Subsequent presses rotates through the subtitle languages available on the DVD.

Subtitle :1 English Subtitle :2 Spanish

HELLO!

HOLA!

Audio : Stereo

Note

With karaoke and other discs, set the appropriate audio type for singing and accompaniment after referring to information on the disc jacket or accompanying material.

Page 34

Continuing Playback from a

STANDBY

LAST M

Specified Location (Last Memory)

The Last Memory function is convenient when you want to continue viewing a disc from the point where you were watching before. Unlike the resume function, the Last Memory function is effective even if the DVD is removed from the player (Last Memory locations saved for Video CDs are effective only if the disc remains loaded in the player). Last Memory may not work reliably with some Video CDs that feature PBC.

TV ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

STEP/ SLOW

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

FUNCTION M

PROGRAM

451

OPEN /CLOSE

SETUPRETURN

CLEAR

DVD

VCD

Memorizing a Last Memory location to return to later

LAST M

STANDBY

Press LAST M during play.

The “LAST” indicator lights on the player.

Press STANDBY to turn the power to standby, or stop playback with 7.

Once memorized, the memorized point will be recalled even if the power is turned off, or if the disc is ejected. Points on up to 5 discs can be memorized, and those points are recalled the next time any of the discs are played back.

• A Last Memory point can be memorized for only one Video CD at a time as the function is only effective until the Video CD is removed from the player.

DVD

VCD

Resuming playback from where LAST MEMORY was pressed

LAST M

Load a disc that has a Last Memory point memorized.

Some DVDs will start playback automatically when loaded. In this case, press 7 to stop playback.

Press LAST M while in the stop mode.

The disc begins playback at the memorized point.

• Last Memory mode may not function for some DVDs.

• You can use Last Memory for up to five discs (after that the one used least recently is deleted to make space for a new one).

• Even with a disc you have memorized with Last Memory, playback begins at the start of the disc if you press £.

• This function is for playback of DVDs or Video CDs only. You cannot use it with CDs and MP3s.

■ To clear the Last Memory location

1 Load a disc that has a Last Memory point memorized.

Some DVDs will start playback automatically when loaded. In this case, press 7 to stop playback.

2 Press LAST M while in the stop mode.

The disc begins playback at the memorized point.

3 Once the picture appears, press LAST M again. 4 While “Last Memory” is displayed on the screen, press

CLEAR.

The “LAST” indicator disappears from the display.

Page 35

Memorizing Settings for Often Viewed DVDs (Condition Memory)

You can store in memory settings for DVDs you often watch. Settings remain in memory even if you remove the disc from the player, or switch power to the player to standby. If you load a disc that has its settings memorized, “COND.” appears in the display. When you start playing the disc, the memorized settings are automatically recalled.

DVD

Memorizing Settings for DVDs

COND. M

TV ON / STANDBY

STANDBY

ANGLE AUDIO SUBTITLE

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

451DV

REMOTE CONTROLLER

DVD

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

CLEAR

COND. M

Press COND. M during playback.

Settings are memorized for the disc currently playing.

The following six settings are memorized:

On Screen Display (page 17, 47)

Video Adjust (page 17, 42)

Multi-Angle (page 32)

Multi-language (pages 47)

Multi-Language subtitles (page 33, 48)

Parental Lock Level (page 51-53)

■ When a disc that has memorized settings is loaded

“Condition Memory” will appear on the screen, and the previously memorized settings will be selected.

■ Erasing the recorded contents

Load a disc that has memorized settings, and press CLEAR while “Condition Memory” is being displayed. The disc’s recorded data will be erased.

Notes

• Settings are stored in memory for use any time.

• You can use Condition Memory for up to 15 discs (after that the

one used least recently is deleted to make space for a new one).

• If you make changes to any of the settings memorized in Condition Memory, press COND. M during playback to memorize new settings.

• Switching of the multi-language mode etc., is automatic on some discs.

Page 36

Viewing Disc Information

Use DISPLAY to get current information about the disc currently loaded. You can get information about the titles and chapters on a DVD or tracks on a Video CD or CD or folders and tracks on a MP3. When viewing DVDs, you can also check the digital bitstream transmission rate.

DVD

VCD

MP3

Viewing Disc Information during while a disc is playing

DISPLAY

Press DISPLAY during while a disc is playing. Press DISPLAY repeatedly to change the information being displayed.

The disc information is displayed superimposed over the video image on the screen.

Press and hold DISPLAY to display the time remaining on the disc.

When you release the button, the information disappears.

The display changes for each type of disc as follows each time the button is pressed.

DVD

current title/chapter number

Play

Title

remaining time of current title

3–29 49.58

elapsed time of current title

101.04–51.06/

remaining total time of current title

current title/chapter number elapsed time of current title

Play

Chapter

elapsed time of current chapter

3–32 54.53

1.510.21/

elapsed total time of current chapter

current title/chapter number elapsed time of current title

Play

Chapter

remaining time of current chapter

3–32 54.53

1.51–1.30/

remaining total time of current chapter

current title/chapter number elapsed time of current title

Play

Tr. Rate:

transmission rate level meter

3–32 54.53

6.3

transmission rate level

Video CD (with PBC disabled)

current track number/ total number of tracks

Play

All

Video CD's remaining time

Video CD's total elapsed time

3/12 10.53

70.19–59.26/

Video CD's total time

current track number Video CD's total elapsed time

Play

elapsed time of current track total time of current tracks

Track

3 10.53

5.233.56/

current track number Video CD's total elapsed time

Play

remaining time of current track

Track

3 10.53

5.231.27/

total time of current tracks

Display off

current track number

Play

remaining time of current track remaining total time of

Track

3 0.03

elapsed time of current track

3.32–3.29/

current tracks

current track number current total time of tracks

Play

CD's remaining time

All

1/10 1.13

66.32–66.20/

CD's total time

Display off

Page 37

■ Using DIMMER function

Press DIMMER to change the display brightness.

Each time DIMMER is pressed, the display brightness of the unit changes as shown below. Normal → Dim → Very Dim → Normal

MP3

current track number/ total number of tracks in folder

Play

Track

current folder number/ total number of folder

Play

Folder

elapsed time of current track

16/20 0.05

TRACK1~1

track name

elapsed time of current track

2/10 0.05

FOLDER~1

folder name

current folder number/

current track number

Play

Track

remaining time of

current track

elapsed time of current track

2–16 0.05 –2.25

2.30

total time of

current track

current folder number/

current track number

Play

Tr. Rate:

elapsed time of current track

2–16 0.05

128kbps

transmission rate level

Display off

Notes

• Depending on the format and type of disc being used, not all screens may be displayed.

• When playing Video CDs in PBC mode or unfinalized CD-Rs not all the above information is displayed.

TV ON / STANDBY

ANGLE AUDIO SUBTITLE

COND. M

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

OPEN /CLOSE

DISPLAY

DIMMER

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

451DV

DVD

VCD

MP3

2/3

STANDBY

LAST M DIMMER DISPLAY

TOP MENU

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

Viewing Disc Information during while a disc is stopped

DISPLAY

DVD

Information: DVD

Titles and number of chapters in each title

Video CD and CD

Information: Compact Disc

Total playing time of disc, tracks and track times

MP3

Press DISPLAY during while a disc is stopped to display DVD title and chapter information or Video CD and CD track information or MP3 folder and track information. Press DISPLAY again to turn the display off.

Information about the titles and chapters or folders and tracks on a disc is displayed. When the information exceeds the space on the screen, use the cursor buttons (2/

3) to move to other screens.

Title Chapter

01 06 02 03 04 05

1/2

Total time 72 . 04

Track

01 02 03 04 05

1/2

1 ~ 30 1 ~ 21 1 ~ 46 1 ~ 12 1 ~ 8

Tim e 5 . 23 4 . 55

6 . 13 5 . 45 5 . 10

Title

08 09 10

Track

09 10

Chapter

1 ~ 10 1 ~ 13 1 ~ 5 1 ~ 4 1 ~ 8

DISPLAY

Tim e 6 . 51 3 . 18 6 . 50 4 . 16 3 . 22

DISPLAY

Exit

Information: MP3

Folder

01 02 03 04 05

1/2

Track 1 ~ 9 1 ~ 11 1 ~ 3 1 ~ 22 1 ~ 15

Folder

01 02 03 04 05

Track

1 ~ 10

1 ~ 13

1 ~ 5

1 ~ 4

1 ~ 8

DISPLAY

Exit

Folders and number of tracks in each folder

Page 38

Adjusting Audio and Video Settings

—

— —

V2Video1

General

Language

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio

Off

Dolby Digital

Dolby Digital 3 PCM 96kHz 3 48kHz MPEG 3 PCM

Output Dolby Digital

SETUP

ENTER

Exit

Move

Select

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

Using the Setup Screen Menus

SETUP

Press ON (Standby/On on the front panel).

Press SETUP.

The Setup screen appears.

Example

Audio

Setup audio Digital output format/tone adjust

V2Video1

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Move

Language

Off

—

Dolby Digital

—

Off

—

96kHz 3 48kHz

—

MPEG 3 PCM

—

General

SETUP

Exit

Use the cursor buttons (2/3) to select the menu you want.

As each menu is selected with the cursor, the settings appear below the menu heading.

Use the cursor buttons (∞) to enter the menu.

The top item within the menu becomes highlighted.

Example

Audio

Change Dolby Digital output mode

V2Video1

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Move

General

Language

Off

—

Dolby Digital Dolby Digital 3 PCM 96kHz 3 48kHz

—

MPEG 3 PCM

—

ENTER

Select

SETUP

Exit

Use the cursor buttons (5/∞) to select the setting you want to change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

Use the cursor buttons (3) to enter the setting options.

Example

• Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press 7 first before pressing SETUP.

• Operating the menu after pressing 7 may cancel the resume function.

• Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

Use the cursor buttons (5/∞) to select a new setting and press ENTER to set the new setting in

ENTER

RETURN

memory.

Press RETURN or the cursor button (2) to exit the options without making any changes.

Press RETURN or the cursor button (2) to go back to the main menu bar to select another menu.

SETUP

Notes

• If you turn off the DVD player during setup, the settings are canceled. Press SETUP to finish the setup.

• The memorized resume position may be erased by setup.

• The Setup screen always shows the latest settings.

Press SETUP to close the Setup screen.

The Setup screen closes.

Page 39

—

General

Language

Audio

Video1

Setup Menu Mode

Setup Navigator

Parental Lock

Expert Basic Off (us)

Change menu mode

SETUP

ENTER

Exit

Move

Select

■ When setting up for the first time

It is recommended to set up player using the Setup Navigator (page 16). If you selected [Auto Start Off] when the Setup Navigator appeared, you may still set up the player using the Setup Navigator in the General menu screen. If you choose not to use the Setup Navigator, be sure to make the necessary settings in the Setup screen Audio, Video 1, Video 2 and Language menus as described on the following pages. Some DVDs start playing automatically when loaded in the player. If a DVD has been loaded, be sure to press 7 before proceeding.

Note

The next time you press SETUP, you’ll see the menu screen that you exited from last time.

TV ON / STANDBY

ANGLE AUDIO SUBTITLE

COND. M

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

OPEN /CLOSE

ENTER

SETUPRETURN

STEP/ SLOW

FUNCTION M

CLEAR

PROGRAM

451DV

SETUPRETURN

2/3/5/∞

STANDBY

LAST M DIMMER DISPLAY

TOP MENU

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

Changing to the Setup Screen “Expert” Menu Mode

The Setup screen menus are divided into two levels, [Basic] and [Expert], to make this unit more convenient to operate for different levels of users. The [Basic] menu mode contains functions that may be considered necessary for the basic operations of this player and helpful on-screen information

identified by the [Basic] menu mode additional functions of the player that can be adjusted to further personalize performance of the player. In this manual, functions that are contained in the [Expert] menu mode are identified by the Make changes to the [Setup Menu Mode] setting in the Setup screen General menu.

mark. The [Expert] menu mode adds to the

icon.

Expert

■ How to interpret the setting indicator colors in the Setup screen menus

When setting up the system, or when making adjustments, it is convenient to know what settings are applicable to the different disc formats. When the settings appear for each menu option, the currently selected setting appears with the setting indicator highlighted in one of three colors: blue, green or yellow. These colors correspond to what formats the menu option effects as shown in the table below.

Color of indicator Disc format(s)

Blue

Yellow

Green

Note

If a setting applicable only to DVDs is changed while a Video CD or CD is loaded, a blue DVD icon appears in the upper right hand corner of the screen to indicate that the setting is not applicable to the currently loaded disc. The setting will be effective the next time a DVD is loaded.

DVD only

DVD/Video CD

All compatible formats

Settings: Expert

Basic (Factory setting)

Note

On-screen information only appears in the [Basic] menu mode .

Page 40

— —

V2Video1

General

Language

Exit

Move

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio

Off Dolby Digital Dolby Digital 3 PCM 96kHz 3 48kHz MPEG 3 PCM

Change Dolby Digital output mode

SETUP

Adjusting Audio and Video Settings

Adjusting the Dynamic Range of the Audio Soundtrack

Audio DRC stands for Audio Dynamic Range Compression. When Audio DRC is on, soft sounds such as dialog can be heard more clearly without making loud sounds even louder. Select from three levels of compression depending on how much effect you want. When Audio DRC is set to [Off], there is no effect on the audio source. Make changes to the [Audio DRC] setting in the Setup screen Audio menu.

Audio

V2Video1

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Dynamic playback at low volume

Move

Settings: Off (Factory setting)

Notes

• Audio DRC is only effective with Dolby Digital audio sources.

• The level of Audio DRC may differ depending on the DVD.

• If you have set the [Dolby Digital Out] to [PCM] and the [Digital

Out] setting to [On], the Audio DRC effect is output through the digital out jack.

• The effect of Audio DRC depends on your speakers and AV amplifier settings.

General

Language

Off

—

On Off

— — 96kHz 3 48kHz — MPEG 3 PCM

SETUP

Exit

Setting the Digital Audio Output

This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio menu to reflect the capabilities of the components that you have made digital connections to.

Notes

• If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player.

• If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any changes in this menu.

■ Dolby Digital Out

This player is capable of outputting the Dolby Digital surround sound audio signal. When the player is connected to an AV component that has a built-in Dolby Digital decoder, select [Dolby Digital]. This player can also convert the Dolby Digital signal to a digital Linear PCM signal, the same digital signal output from a CD. Select [Dolby Digital 3 PCM] when you have made connections to an amplifier or receiver with a Dolby Pro Logic decoder or a Digital Analog Converter (DAC).

Settings: Dolby Digital (Factory setting)

Dolby Digital 3 PCM

Page 41

■ DTS Out

— — — — —

SETUP

V2Video1

General

Language

Exit

Move

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Audio

Off Dolby Digital Off MPEG MPEG 3 PCM

Change MPEG audio output mode

— — — — — —

V2Video1

General

Language

Exit

Move

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Digital Out

Audio

Off Dolby Digital Off 96kHz 3 48kHz MPEG 3 PCM On Off

SETUP

This player is capable of outputting DTS digital audio for DVDs recorded in DTS. When this player is connected to an AV component that has a built-in DTS decoder, select [DTS]. If your system is not equipped to decode DTS, select [Off]. Refer to the operating instructions supplied with your audio components if you are unsure about compatibility with DTS.

Audio

V2Video1

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Change DTS output mode

Move

Language

Off

—

Dolby Digital

—

Off

—

DTS MPEG 3 PCM

—

General

SETUP

Exit

Settings: Off (Factory setting)

DTS

Note

If you have made digital audio connections to component(s) not equipped to decode the DTS digital bitstream, be sure to select [Off]. If a DTS signal is output without decoding, the output is digital noise that could potentially cause damage to your speakers.

■ 96 kHz PCM Out

This player is capable of outputting digital signals with a sampling frequency of 96 kHz. If you have made connections to a component capable of processing this signal rate, select [96 kHz] for the signal to be output as is. As some components are incapable of processing digital signal input with sampling rates of 96 kHz, selecting [96 kHz 3 48 kHz] compresses the signal to a standard signal with a sampling rate of 48 kHz.

Audio

V2Video1

Audio DRC

Dolby Digital Out

DTS Out

96kHz PCM Out

MPEG Out

Change 96kHz output mode

Move

Settings: 96 kHz 3 48 kHz (Factory setting )

96 kHz

Note

On DVDs that contain copy protection, the 96 kHz signal may only be output from the analog audio jacks.

Language

Off

—

Dolby Digital

—

Off

—

96kHz 3 48kHz

—

96kHz

General

SETUP

Exit

■ MPEG Out

This player is capable of outputting the MPEG digital bitstream. When the player is connected to an AV component that has a built-in MPEG decoder, select the [MPEG] setting. Otherwise, select [MPEG 3 PCM] to convert the digital signal to the PCM signal, the digital signal output from a CD.

Settings: MPEG

MPEG 3 PCM (Factory setting)

■ Digital Out

Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to [Off] there is no signal output from the digital audio output jacks. Make changes to the [Digital Out] setting in the Setup screen Audio menu in the [Expert] menu mode (page 39).

Settings: On (Digital bitstream is output) (Factory setting)

Off (Digital bitstream is not output)

Expert

Page 42

Adjusting Audio and Video Settings

Setting the TV Screen Size

The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9. This width-to-height ratio is called the aspect ratio. When viewing software recorded in different aspect ratios, the image’s height to width ratio can be switched to match the TV or monitor being used. Make changes to the TV screen size in the [TV Screen] setting in the Setup screen Video 1 menu. Please note that changes to the [TV Screen] setting cannot be made when a disc is playing. Stop playback of the disc before attempting to make any changes.

Video1

TV Screen

Move

Language

General

4:3(Letter Box)

—

4:3(Pan&Scan)

)

16:9(Wide

SETUP

Exit

Audio

Select your display preference

Settings: 4:3 (Letter Box)

4:3 (Pan & Scan) 16:9 (Wide) (Factory setting)

Notes

• If [Standard (4:3)] is selected in the Setup Navigator screen, [4:3 (Letter Box)] is selected on this screen. If you prefer the pan&scan format, change the settings on this screen.

• Whether the aspect can be switched or not depends on the disc. Please refer to the information written on the disc jacket, etc.

• Some discs may not include the screen format selected in the [TV Screen] setting. When this occurs, the standard TV screen format available on the disc is automatically selected.

■ Differences in screen sizes and DVD formats

The number of screen size formats currently available can be somewhat confusing. If set incorrectly, the video presentation may not appear as it should. The following diagrams and descriptions are intended to help you set your TV screen size in a way that will allow you to fully enjoy the digital video of DVD. The settings in the [TV Screen] setting are perhaps most applicable when the DVD you are watching is programmed in the wide screen format. If you have a standard TV, select either [4:3 (Letter Box)] or [4:3 (Pan & Scan)] based on your personal preference. If you have a wide screen TV, select [16:9 (Wide)].

When viewing a wide screen TV or monitor

DVD screen size format

Wide screen format DVD

Please note that there are some wide screen letter box formats that place black bars at the top and bottom of the screen. This is not a malfunction.

Standard screen format DVD

When viewing a standard screen format DVD on a wide screen TV, black bars may be automatically placed at the side of the screen to adjust to the DVD format.

Standard screen format DVD (unnatural stretched effect)

If you are viewing a standard screen format DVD on a wide screen TV, the picture may appear ‘stretched’ on the screen. To remedy this condition, change your wide screen TV to display a standard (4:3) screen. Refer to the instructions supplied with your wide screen TV or monitor for more information.

When viewing a standard size TV or monitor

DVD screen size format

Wide screen format DVD

The Letter box presentation places black bars at the top and bottom portions of the screen to provide the full wide screen presentation of a movie on a standard TV (4:3 aspect ratio).

Wide screen format DVD

The Pan & Scan presentation crops both sides of the wide screen presentation to use the full standard TV screen.

Standard screen format DVD

If you have a standard TV, the standard screen format will be presented regardless of the setting.

Setting and Appearance

“Pan & Scan” setting

“Wide” setting

“Letter Box” setting

Wide screen format DVD (unnatural squeezed effect)

If you are viewing a wide screen format DVD on a standard TV and the [TV Screen] setting is set to [16:9 (Wide)], the picture may appear ‘squeezed’ on the screen. To remedy this condition, select either [4:3 (Letter Box)] or [4:3 (Pan & Scan)].

Any setting

“Wide” setting

Page 43

— — —

Audio

Video1

Language

General

Exit

Move

TV Screen

S-Video Out

Screen Saver

16:9(Wide

) S2 On Off

SETUP

Setting the Video 1 Options

■ Switching the S Video Output

Expert

You can Switch the kind of S Video signal output from the S Video outputs. If you connected your TV with an S Video cord, in rare cases the TV picture may appear stretched. In this case switch the output from [S2] to [S1]. Make changes in the [S-Video Out] in the Setup screen Video 1 menu in the [Expert] menu mode (page 39).

Video1

TV Screen

S-Video Out

Screen Saver

Move

Language

16:9(Wide

—

General

)

SETUP

Exit

Audio

Settings: S1

S2 (Factory Setting)

■ Turning the Screen Saver On and Off

Expert

As a protective function against residual images on the TV screen or monitor, a phenomenon referred to as “screen burn”, the screen saver appears when the same screen has been displayed for a length of time. By default, the screen saver is turned on. However, the screen saver function can be turned on and off at your discretion. Make changes to the [Screen Saver] setting in the Setup screen Video 1 menu in the [Expert] menu mode (page 39).

Settings: On (Factory setting)

Off

Note

Pressing 8 (or £ ) displays a playback screen, and pressing 8 (or £ ) again resumes playback.

Page 44

Video Memory Select Video Setup

DISPLAY

ENTER

Fine Focus On Off

Move

Select

Check

Video Memory Select Video Setup

Memory 1

Memory 2

Memory 3

Cinema AnimationStandard

Video Memory Select Video Setup

Adjusting Audio and Video Settings

Adjusting the Video Quality

You can either select a preprogrammed setting designed to match certain program types or make adjustments to match your own preferences and save them in the player’s memory. Make changes to the [Video Adjust] setting in the Setup screen Video 2 menu.

Language

Audio

Video2

Background

Video Adjust

Picture Quality Controls

Move

General

—

Gray

—

Start

SETUP

Exit

■ Selecting a preprogrammed setting

1 Use the cursor button (3) to select [Start] then press

ENTER.

2 Press ENTER.

■ Adjusting the picture quality settings

– To create your own setting (1)

1 Use the cursor button (3) to select [Start] then press

ENTER.

2 Use the cursor button (∞) to select [Video Setup] then

press ENTER.

3 Use the cursor buttons (2/3) to select the setting to [On] or

[Off].

Standard (Factory Setting)

Presents the video with no effect added.

Cinema

Delivers a cinema-like picture.

Animation

Provides images with bright clear colors.

Memory 1, Memory 2, and Memory 3

These are user programmable settings. See ‘Adjusting the picture quality settings’ on pages 44 and 45 for more information.

3 Use the cursor buttons (2/3/5/∞) to select one of the

preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting can be viewed while it is highlighted on the screen. This may be useful in selecting an appropriate setting.

4 Press ENTER.

The new selection is set.

Notes

• Each picture quality setting is defined by a number of individual settings, described in ‘Adjusting the picture quality settings’ on pages 44 and 45.

• Depending on the disc and the TV/monitor, you may not see the effect clearly.

4 Use the cursor buttons (5/∞) to select the setting to adjust.

You can adjust any or all of the following picture quality factors:

Fine Focus

Switch on to reveal greater detail (higher resolution) in the picture.

Contrast

Adjusts the contrast of the elements in the picture.

Sharpness

Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. (This setting is only effective when [Fine Focus] is [On].)

Chroma Level

Adjusts how saturated colors appear.

Hue

Adjusts the overall color balance between red and green. (This is only effective when the player is connected using the VIDEO OUTPUT VIDEO or VIDEO OUTPUT S VIDEO jacks.)

Page 45

Memory

Fine Focus Contrast Sharpness Chroma Level Hue

Off

soft fine

min max

green red

Off 1 2 3

Video Memory Select Video Setup

5 Use the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

6 Repeat steps 4 and 5 to make adjustments to other

settings.

If you would like to save the settings in the player’s memory, be sure to select either [1], [2], or [3] in the [Memory] setting to establish which memory location to save the new settings in. Please note that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.

■ Adjusting the picture quality settings

– To create your own setting (2)

1 Use the cursor button (3) to select [Start] then press

ENTER.

2 Use the cursor button (∞) to select [Video Setup] and press

ENTER.

3 Press DISPLAY.

Memory

Move

ENTER

Off 1 2 3

Select

DISPLAY

Check

7 When you are finished making adjustments, press ENTER

to establish the new settings.

4 Use the cursor buttons (5/∞) to select the setting and use

the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes immediately.

5 To memorize the setting, select Memory 1, 2, 3, then press

ENTER.

The previous setting will be erased.

Page 46

—

— —

Video2

Language

General

Audio

Exit

Move

Background

Video Adjust

Still Picture

On Screen Display

Angle Indicator

Gray

Auto Position-Wide Position-Normal Off

SETUP

—

— — —

Video2

Language

General

Audio

Exit

Move

Background

Video Adjust

Still Picture

On Screen Display

Angle Indicator

Gray

Auto Position-Normal On Off

SETUP

Adjusting Audio and Video Settings

Setting the Video 2 Options

■ Changing the Background of the Screen

You can select a background to appear when the player is in the stop mode. Make changes to the [Background] setting in the Setup screen Video 2 menu.

Language

Audio

Video2

Background

Video Adjust

Adjust picture quality

Move

— —

Gray Black

General

SETUP

Exit

Settings: Gray

Black

■ Selecting the Type of Paused Image to Display

This function lets you view a clear still-image when DVD playback is paused. Make changes in the [Still Picture] setting in the Setup screen Video 2 menu in the [Expert] menu mode (page 39).

Audio

Video2

On Screen Display

Angle Indicator

Move

Settings: Field (Picture shake will be eliminated during a

Expert

Language

—

Gray t

Field Frame Auto

General

SETUP

Exit

Background

Video Adjust

Still Picture

paused picture.)

Frame (Select to obtain higher picture quality.)

Auto (Selects [Field] or [Frame] automatically

according to the disc.) (Factory setting)

■ Setting the Position of the On-screen Display

When watching conventional software on a wide screen TV, the operation display is at the very top of the screen, and may be difficult to see. Changing the position of the display lets you see operation indicators clearly even on a wide screen TV. Alternatively, you can choose to turn them off completely with the [Off] setting. Make changes in the [On Screen Display] in the Setup screen Video 2 menu in the [Expert] menu mode (page 39).

Settings: Position-Wide

Note

This setting is only effective with DVDs that contain a 4:3 aspect ratio video presentation.

■ Turning the angle indicator on and off

When a picture recorded in different angles is played back is displayed on the screen. This setting lets you see clearly whether the playback picture is recorded in multiple angles or not. Turn the angle indicator on or off in the [Angle Indicator] setting in the Setup screen Video 2 menu in the [Expert] menu mode (page 39).

Expert

Position-Normal (Factory setting) Off

Expert

Settings: On ( is displayed) (Factory setting)

Off (Not Displayed)

Note

Even when the [Angle Indicator] setting is set to [Off], the indicator in the display panel of the player lights during multi-angle playback. Therefore, it is possible to know when the multi-angle function can be used without having to display the icon on the screen.

Page 47

— —

Language

General

Audio

Video1

Exit

Move

OSD Language

Audio Language

Subtitle Language

Auto Language

English French German Italian Spanish Other

Setup audio language

SETUP

Setting the Language Options

DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this player. Please note that if you have completed the Setup Navigator, the audio and subtitle language options have automatically been set in accordance with the [OSD Language] (the language that appears on the screen).

Note

DVDs differ in content and do not all contain multiple language or subtitle information. Therefore making settings in this section may have no effect on some DVDs.

■ Setting the On-screen Display (OSD) Language

This setting is used to establish the language that operation indicators and on-screen messages and operations display. Change this setting in the Setup screen Language menu [OSD Language] setting.

General

Language

Video1

Audio

OSD Language

Audio Language

Subtitle Language

Auto Language

Select the On Screen Language

Move

English

—

français Deutsch Italiano Español

SETUP

Exit

■ Selecting an audio language preference

The audio language that you normally listen to can be selected from the various audio languages on a DVD. Even when the audio language is changed during playback by pressing AUDIO, the language selected at this setting will be selected as the default when the DVD is changed. Make changes to the [Audio Language] setting in the Setup screen Language menu. You cannot make this setting with a disc playing.

Settings: English (Factory setting)

French German Italian Spanish Other (For details on how to select other

languages, see ‘When [Other] is selected’ on page

49.)

Note

The menu settings may be different from those shown above.

Settings: English (Factory setting)

français Deutsch Italiano Español

Notes

• The menu settings may be different from those shown above.

• The [OSD Language] setting is factory set to [English]. If you

want English to be displayed, it is not necessary to adjust this setting.

Page 48

Language

General

Audio

Video1

Exit

Move

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

w/ Subtitle Language English French German Italian Spanish Other

SETUP

Adjusting Audio and Video Settings

Setting the Language Options

■ Selecting a subtitle language preference

The subtitle language that you will normally display can be selected from the subtitles programmed on a disc. Even when the subtitle language is changed during playback by pressing SUBTITLE, the language selected at this setting will be selected when the disc is changed. Make changes to the [Subtitle Language] setting in the Setup screen Language menu. You cannot make this setting with a disc playing.

OSD Language

Audio Language

Subtitle Language

Auto Language

Setup disc's subtitle language

Move

English French German

—

Italian Spanish Other

SETUP

Exit

General

Language

Video1

Audio

Settings: English (Factory setting)

French German Italian Spanish

(For details on how to select other languages,

Other

see ‘When [Other] is selected’ on page 49.)

Note

The menu settings may be different from those shown above.

■ Setting Auto Language to control subtitle and audio language based on program content

When the Auto Language function is used, foreign movies are shown with the original audio soundtrack and subtitles in the language selected in the [Subtitle Language] menu option. Domestic films are shown with the original audio soundtrack and no subtitles. (This setting may not be effective with all DVD discs.) Make changes to the [Auto Language] setting in the Setup screen Language menu. You cannot make this setting with a disc playing.

General

Language

Video1

Audio

OSD Language

Audio Language

Subtitle Language

Auto Language

Play dialog, etc. in original language Subtitle ON with foreign audio

Move

— — — —

English English English On Off

SETUP

Exit

■ Selecting a DVD menu language preference

Expert

In addition to containing different audio languages, DVD may also contain menu screens in different languages as well. Setting a DVD language preference, sets the selected language as a default when DVDs with menu information in that language are encountered. Selecting [w/ Subtitle Language] automatically assigns the language selected in the [Subtitle Language] setting. Make changes to the [DVD Language] setting in the Setup screen Language menu in the [Expert] menu mode (page 39). You cannot make this setting with a disc playing.

Settings: w/ Subtitle Language (Factory setting)

English French German Italian Spanish Other (For details on how to select other

languages, see ‘When [Other] is selected’ on page

49.)

Notes

• The menu settings may look different from the one shown above.

• If this function is not effective, the languages that can be selected

may also be selected in the DVD menu. Press MENU to open the DVD menu and make your selection accordingly.

Settings: On (Factory setting)

Off

Note

The Auto Language function operates only when this function is set to [On], and the language set for the [Audio Language] and [Subtitle Language] settings is the same.

Page 49

SETUP

ENTER

Language

General

Audio

Video1

Exit

Move

Select

OSD Language

Audio Language

Subtitle Language

Auto Language

English French German Italian Spanish

Other

Setup audio language

■ Selecting subtitles, assist subtitles or no subtitles

Use this function to turn the subtitles on or off. Additionally, some DVDs provide assist subtitles that provide additional explanations of scenes in addition to the standard subtitles for viewers who are hard of hearing. Select [Assist Subtitle] to display these subtitles on DVDs where this function is offered. Make changes to the [Subtitle Display] setting in the Setup screen Language menu in the [Expert] menu mode (page 39). You cannot make this setting with a disc playing.

Video1

Audio

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

Move

Settings: On (Factory setting)

Notes

• If there is no subtitle information recorded on the DVD, no subtitles are displayed even if this function is set to [On].

• This setting serves as a default as whether or not to display subtitles. Even if this option is set to [Off], subtitles can be displayed by pressing SUBTITLE. Similarly, if this option is set to [On], the subtitles can be turned off by pressing SUBTITLE and then CLEAR.

■ Forcing subtitles to be displayed

Even when the subtitles are turned off, some DVDs will nevertheless display them on the screen. This setting allows you to select the language of the subtitles to be displayed with this type of DVD. Select [With Audio] to display the subtitles in the same language as the currently selected Audio Language. Select [Selected Subtitle] to display the subtitles in the language set in the [Subtitle Language] setting. Make changes to the [Subtitle Off] setting in the Setup screen Language menu in the [Expert] menu mode (page 39). You cannot make this setting with a disc playing.

Video1

Audio

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

Move

Settings: With Audio

Expert

General

Language

English

—

English

—

English

—

On Off Assist Subtitle

SETUP

Exit

Off Assist Subtitle

General

Language

English

—

English

—

English

—

English

—

With Audio Selected Subtitle

—

SETUP

Exit

Selected Subtitle (Factory setting)

Expert

■ When [Other] is selected

When you want to select one of the 136 languages as the main audio language, follow the steps below when the following screen appears. A language code list can be found on page 50.

1 Use the cursor buttons to select [Other] and press ENTER.

The language selection screen appears.

General

Language

Video1

Audio

Audio Language

List of Language Code (0~2)

ja: Japanese

Setup audio language

–/+ Move

2 Use the cursor buttons (2/3) to select either “List of

Languages” or “Code”.

3 If you select “List of Languages”, use the cursor buttons

(5/∞) to select the language.

For languages which are only shown as a code, please refer to ‘Language Code List’ on page 50.

List of Languages

ja: Japanese

If you select “Code”, use the cursor buttons (5/∞) to input the numbers of the input code.

Use the cursor buttons (2/3) to change the position of the cursor. You can also use the number buttons to enter the code.

Code (0~2)

1001

4 Press ENTER to set the new language.

To exit the screen without making any changes, press RETURN.

1001

SETUP

Select

RETURN

ENTER

Return

Exit

Page 50

Adjusting Audio and Video Settings

Language Code List

Language codes are used when setting the audio and subtitle language preferences (page 47, 48).

Language Input-code

Japanese (ja)

English (en)

French (fr)

German (de)

Italian (it)

Spanish (es)

Chinese (zh)

Dutch (nl)

Portuguese (pt)

Swedish (sv)

Russian (ru)

Korean (ko)

Greek (el)

Afar (aa)

Abkhazian (ab)

Afrikaans (af)

Amharic (am)

Arabic (ar)

Assamese (as)

Aymara (ay)

Azerbaijani (az)

Bashkir (ba)

Byelorussian (be)

Bulgarian (bg)

Bihari (bh)

Bislama (bi)

Bengali (bn)

Tibetan (bo)

Breton (br)

Catalan (ca)

Corsican (co)

Czech (cs)

Welsh (cy)

Danish (da)

Bhutani (dz)

Esperanto (eo)

Estonian (et)

Basque (eu)

Persian (fa)

Finnish (fi)

Fiji (fj)

Faroese (fo)

Frisian (fy)

Irish (ga)

Scots-Gaelic (gd)

Galician (gl)

Guarani (gn)

1001

0514

0618

0405

0920

0519

2608

1412

1620

1922

1821

1115

0512

0101

0102

0106

0113

0118

0119

0125

0126

0201

0205

0207

0208

0209

0214

0215

0218

0301

0315

0319

0325

0401

0426

0515

0520

0521

0601

0609

0610

0615

0625

0701

0704

0712

0714

Language Input-code

Gujarati (gu)

Hausa (ha)

Hindi (hi)

Croatian (hr)

Hungarian (hu)

Armenian (hy)

Interlingua (ia)

Interlingue (ie)

Inupiak (ik)

Indonesian (in)

Icelandic (is)

Hebrew (iw)

Yiddish (ji)

Javanese (jw)

Georgian (ka)

Kazakh (kk)

Greenlandic (kl)

Cambodian (km)

Kannada (kn)

Kashmiri (ks)

Kurdish (ku)

Kirghiz (ky)

Latin (la)

Lingala (ln)

Laothian (lo)

Lithuanian (lt)

Latvian (lv)

Malagasy (mg)

Maori (mi)

Macedonian (mk)

Malayalam (ml)

Mongolian (mn)

Moldavian (mo)

Marathi (mr)

Malay (ms)

Maltese (mt)

Burmese (my)

Nauru (na)

Nepali (ne)

Norwegian (no)

Occitan (oc)

Oromo (om)

Oriya (or)

Panjabi (pa)

Polish (pl)

Pashto, Pushto (ps)

Quechua (qu)

0721

0801

0809

0818

0821

0825

0901

0905

0911

0914

0919

0923

1009

1023

1101

1111

1112

1113

1114

1119

1121

1125

1201

1214

1215

1220

1222

1307

1309

1311

1312

1314

1315

1318

1319

1320

1325

1401

1405

1415

1503

1513

1518

1601

1612

1619

1721

Language Input-code

Rhaeto-Romance (rm)

Kirundi (rn)

Romanian (ro)

Kinyarwanda (rw)

Sanskrit (sa)

Sindhi (sd)

Sangho (sg)

Serbo-Croatian (sh)

Sinhalese (si)

Slovak (sk)

Slovenian (sl)

Samoan (sm)

Shona (sn)

Somali (so)

Albanian (sq)

Serbian (sr)

Siswati (ss)

Sesotho (st)

Sundanese (su)

Swahili (sw)

Tamil (ta)

Telugu (te)

Tajik (tg)

Thai (th)

Tigrinya (ti)

Turkmen (tk)

Tagalog (tl)

Setswana (tn)

Tonga (to)

Turkish (tr)

Tsonga (ts)

Tatar (tt)

Twi (tw)

Ukrainian (uk)

Urdu (ur)

Uzbek (uz)

Vietnamese (vi)

Volapük (vo)

Wolof (wo)

Xhosa (xh)

Yoruba (yo)

Zulu (zu)

1813

1814

1815

1823

1901

1904

1907

1908

1909

1911

1912

1913

1914

1915

1917

1918

1919

1920

1921

1923

2001

2005

2007

2008

2009

2011

2012

2014

2015

2018

2019

2020

2023

2111

2118

2126

2209

2215

2315

2408

2515

2621

Page 51

Setting the Parental Lock Level

This player lets you set the Parental Lock if the DVD has a parental lock level recorded on it. With Parental Lock capable discs, you can block access to material you feel is inappropriate for your children. Refer to the DVD disc jacket and the accompanying documentation to see if a particular disc contains a parental lock level. Make changes to the [Parental Lock] setting in the Setup screen General menu. Please note that changes to the Parental Lock level cannot be made when a disc is playing. Stop playback of the disc before attempting to make any changes. You cannot select [Level] or [Country Code] until you have registered a password. Select [Password] to register a new password. See ‘Entering the password’ on the this page for how to register a new password.

Audio

Language

Video1

Setup Menu Mode

Setup Navigator

Setup viewing restrictions

Parental Lock

Move

—

Basic

—

Password Level Country Code

General

SETUP

Exit

Settings: Password

(For information, refer to ‘Entering the Password’ on the this page.)

Level

(For information, refer to ‘Setting the Parental Lock Level’ on the following page.)

Country Code

(For information, refer to ‘Setting the Country Code’ on the following page.)

When a DVD with a set Parental Lock level is loaded

Playback cannot be started until the code number has been correctly input by using the cursor buttons (2/3/5/∞) or the number buttons, and ENTER has been pressed.

■ Entering the Password

When you select either [Level] or [Country Code], it is necessary to register the password (4-digit code number). You ’ll be asked to confirm your existing password before registering a new one. Use the following steps at any time you are asked to enter or confirm your password. 1 Use the cursor buttons (5/∞) or the number buttons to

select a number between 0 and 9.

You can also use the number buttons to enter the numbers directly. When entering your password for the first time, or changing it, you will be asked to reenter your password. When using the number buttons to confirm the password, the numbers appear as asterisks, and the cursor advances automatically to the next position.

Audio

2 Use the cursor buttons (2/3) to move the cursor to a

different position in the password.

When all four numbers of the password have been entered, ENTER appears on the screen.

Audio

3 Press ENTER to set the password.

The password is entered.

Notes

• Be sure not to forget your password. If you should forget it, reset the system, and enter a new password. To reset the system, see ‘Resetting the Player to System Settings’ (page 54). Please note that this procedure resets the system, and clears all saved settings, not just the password.

• Some discs lock out violent scenes. Refer to instruction notes on discs.

Language

General

RETURN

ENTER

General

ENTER

RETURN

SETUP

Return Exit

Video1

Parental Lock: Register Code Number

Enter 4—Digit Code

+/– Move

Video1

Parental Lock: Register Code Number

1019

Enter 4—Digit Code

+/– Move

Page 52

List of Codes Code (0~2)

Setup Country Code

Language

General

Audio

Video1

Exit

Return

Move

Select

+/–

Country Code

2119

SETUP

RETURN

ENTER

Adjusting Audio and Video Settings

Setting the Parental Lock Level

■ Setting the Parental Lock Level

Change the Parental Lock level to a higher or lower level according to the settings printed on the DVD disc jacket or accompanying documentation. If you use the Condition Memory function to save the settings for a particular disc, the Parental Lock level is saved as well. Because it is saved in memory, Parental Lock levels can be set for individual discs according to their content rather than a set level for all DVDs. 1 Select [Level] in the [Parental Lock] setting and press

ENTER.

The screen changes to the password input screen. You cannot select [Level] until you have registered a password. To enter the password, refer to ‘Entering the Password’ on the previous page.

Audio

Level

Language

Video1

Parental Lock: Level Change

234 6785

Setup Parental Lock

Move

General

Select

Off

RETURN

SETUPENTER

Return Exit

2 Use the cursor buttons (2/3) to adjust the Parental Lock

Level.

The lock icons appear “unlocked” up to the selected level to indicate that access is available.

3 Press ENTER to set the new level.

The new Parental Lock level is set and the screen returns to the General menu screen. To go back to the General menu screen without making any changes, press RETURN.

■ Changing the Password

Change your password whenever you feel it is necessary. However, if you forget your existing password, you cannot enter this screen to change it. 1 Select [Password Change] in the [Parental Lock] setting

and press ENTER.

The screen changes to the password input screen. To enter the password, refer to ‘Entering the Password’ on the previous page.

2 Use the cursor buttons (2/3/5/∞) or the number buttons to

enter the new password.

3 When the new password has been entered, press ENTER.

The new password is set and the screen returns to the General menu screen. To go back to the General menu screen without making any changes, press RETURN.

■ Setting the Country Code

Change your Country Code whenever you feel it is necessary. However, if you forget your existing password, you cannot enter this screen to change it. 1 Select [Country Code] in the [Parental Lock] setting and

press ENTER.

The screen changes to the password input screen. To enter the password, refer to ‘Entering the Password’ on the previous page. The Country Code selection screen appear.

2 Use the cursor buttons (2/3) to select either “List of

Codes” or “Code”.

3 If you select “List of Codes”, use the cursor buttons (5/∞)

to select the country.

For country codes which are only shown as a code, please refer to ‘Country Code List’ on page 53.

List of Codes

If you select “Code”, use the cursor buttons (5/∞) to input the numbers of the input code.

Use the cursor buttons (2/3) to change the position of the cursor. You can also use the number buttons to enter the code.

Code (0~2)

2119

4 Press ENTER to set the new Country Code.

To exit the screen without making any changes, press RETURN.

Page 53

Country Code List

Country Input-code Country-code

ARGENTINA

AUSTRALIA

AUSTRIA

BELGIUM

BRAZIL

CANADA

CHILE

CHINA

DENMARK

FINLAND

FRANCE

GERMANY

HONG KONG

INDIA

INDONESIA

ITALY

JAPAN

KOREA, REPUBLIC OF

MALAYSIA

MEXICO

NETHERLANDS

NEW ZEALAND

NORWAY

PAKISTAN

PHILIPPINES

PORTUGAL

RUSSIAN FEDERATION

SINGAPORE

SPAIN

SWEDEN

SWITZERLAND

TAIWAN, PROVINCE

OF CHINA

THAILAND

UNITED KINGDOM

UNITED STATES OF

AMERICA

0118

0121

0120

0205

0218

0301

0312

0314

0411

0609

0618

0405

0811

0914

0904

0920

1016

1118

1325

1324

1412

1426

1415

1611

1608

1620

1821

1907

0519

1905

0308

2023

2008

0702

2119

Page 54

Adjusting Audio and Video Settings

COND. M

TV ON / STANDBY

FUNCTION M

456

789

TV/ VCR

VOL

LAST M DIMMER DISPLAY

ANGLE AUDIO SUBTITLE

TOP MENU

SETUPRETURN

STOPPAUSE PLAY

DOWN UPFR FF

CLEAR

PROGRAM

DVD

RANDOM REPEAT A-B

STEP/ SLOW

REMOTE CONTROLLER

451

ENTER

STANDBY

OPEN /CLOSE

2/3/5/∞

ENTER

SETUP

FUNCTION M

Memorizing settings (Function Memory)

Up to 5 settings can be memorized.

SETUP

FUNCTION M

■ To clear the Function Memory

Press FUNCTION M. again

Note

Some settings cannot be memorized.

Press SETUP.

The Setup screen appears.

Use the cursor buttons (2/3) to select the menu you want.

Use the cursor buttons (5/∞) to select the setting to be memorized.

As each menu is selected with the cursor, the settings appear below the menu heading.

Press FUNCTION M.

“FM” will appear on the screen, and the setting will be memorized.

Recalling memorized settings

FUNCTION M

ENTER

Press FUNCTION M.

Only memorized settings are displayed.

Use the cursor buttons (5/∞) to select the menu to be recalled.

Press ENTER.

Resetting the Player to System Settings

To reset the player, press and hold Stop on the front panel when pressing Standby/On to turn the unit from standby to on .

All program memory, saved settings from functions such as Video Memory, Last Memory and Condition Memory are cleared, TV System is reset to AUTO and all Setup screen menus are returned to factory settings.

Page 55

Pre-programming remote controller

STANDBY

VOL +/– CH +/–

Number buttons

DVD/TV

TV ON / STANDBY

ANGLE AUDIO SUBTITLE

STANDBY

COND. M

LAST M DIMMER DISPLAY

TOP MENU

VOL

ENTER

VOL

TV/ VCR

STOPPAUSE PLAY

DOWN UPFR FF

456

789

RANDOM REPEAT A-B

REMOTE CONTROLLER

DVD

FUNCTION M

451

OPEN /CLOSE

SETUPRETURN

STEP/ SLOW

CLEAR

PROGRAM

ENTER

Learning a pre-programming code

You can make RC-451DV remote controller to operate a TV from other brand than Integra/Onkyo by storing the preprogramming code of the brand in the RC-451DV.

TVDVD

STANDBY

ENTER

Set the DVD/TV switch to TV.

Find the 2-digit number for the brand name of the component that you want to operate in the table on page 56.

Turn on the TV that you want to operate.

While holding down the STANDBY button on the RC-451DV that you want to program, press the ENTER button, and then release both buttons.

Controlling a TV

TVDVD

Set the DVD/TV switch to TV.

Press the ON button to turn on the device.

Press the desired operation button.

CH+ : Changes the TV channel

CH– : Changes the TV channel

TV VOL+ : Increases the TV volume.

TV VOL– : Decrease the TV volume.

TV/VCR : Switches the TV/VCR inputs.

upward.

downward.

456

789

Within 30 seconds, enter the 2-digit code number.

Press some operation buttons for the component that you want to operate to check if the system operates properly.

If the system operates properly, the code is correct. If the component does not operate properly, return to step 3.

Notes

• With some brand’s components, some buttons may not work correctly.

• If more than one code is given in the table, try the code one by one until you reach the code for your component (i.e. if the first code does not work, then try the next).

• The code can be retained by changing the batteries within 1 minute. If the code is lost, store the pre-programming code again.

Page 56

Pre-programming remote controller

Pre-programming Code List

Brand Code

ADMIRAL 01-03

AOC 04

BELL & HOWELL 01, 02

BROKSONIC 04

CRAIG 05-08

CROSLEX 09

CURTIS MATHIS 04, 08, 10

DAEWOO 04, 11, 12

DAYTRON 13

EMERSON 04-08, 13, 14

FISHER 15

GE 03, 04, 16-18

GOLDSTAR 04, 13, 19

HITACHI 04, 13, 20, 21

JC PENNEY 03, 04, 17, 19

JVC 22

KTV 04, 08, 13

LXI 03, 09, 10, 15

MAGNAVOX 04, 09, 13

MITSUBISHI 04, 23

NEC 04

PANASONIC 16-18, 24

PHILCO 04, 09, 13

PHILIPS 09

PIONEER 10, 18, 25

PORTLAND 04, 26

PROSCAN 03

QUASAR 17, 18

RADIO SHACK 03, 04, 08, 23

RCA 03, 04, 17, 26-28

SAMSUNG 04, 13, 29

SANYO 15

SCOTT 04, 08

SHARP 02, 13, 14

SIGNATURE 2000 01, 02

SONY 30

SYLVANIA 04, 09

SYMPHONIC 08

TOSHIBA 02, 10

VIDTECH 04, 20

WARDS 04, 13, 14

YAMAHA 02, 23

ZENITH 01, 31

Page 57

Others

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective instruction manuals of the connected components and TV.

Symptoms

The DVD Player doesn’t switch on.

The disc tray comes back out automatically, shortly after the disc tray is closed.

The DVD Player does not start playback.

The playback picture is occasionally distorted.

Brightness is unstable or noise is visible on the

DVD Player

playback picture.

The picture from the DVD Player doesn’t appear on the TV screen.

Settings are canceled.

Playback doesn’t follow the course of the disc’s programs.

The buttons on the remote controller and DVD Player do not operate.

mark appears on

screen.

mark appears on

screen.

When making changes in the Setup screen menus,

is displayed.

Some settings in the Setup Menu do not appear.

Causes

• The mains lead is disconnected.

• The main power is set to OFF.

• There is external noise in the computer

circuits of the DVD Player.

• The AC fuse is blown.

• The disc is not placed properly on the disc

tray.

• The disc is dirty or warped.

• Region number does not conform with

this unit.

• No disc is inserted.

• An unplayable disc is inserted.

• The disc is placed upside down.

• The disc is not placed within the disc tray

guide.

• The disc is dirty.

• The parental lock function is activated.

• The disc is dirty.

• It is in fast forward or fast reverse

playback.

• Copy protection is activated.

• The TV is not set to receive the output

signals from the DVD Player.

• The DVD Player is not properly connected.

• When the power is turned off by power failure or by unplugging the power cord, settings will be canceled.

• The DVD Player is in repeat playback mode, memory playback mode, or random playback mode, etc.

• Power supply fluctuations or other abnormalities such as static electricity may interrupt correct operation.

• The selected function does not operate for that disc.

• The operation is prohibited by the player.

• There is a Video CD, CD or MP3 loaded

in the player and the setting that was changed only applies to DVD performance.

• The [Setup Menu Mode] is set to [Basic].

Remedies

• Check the connection of the mains lead.

• Turn on the main power.

• Switch off the main power, then switch it

on again. If not recovered, disconnect the mains lead, then connect it again.

• Contact your nearest Integra/ONKYO authorized service center.

• Use the disc tray guide to align the disc.

• Refer to ‘Notes on Discs’.

• If the region number on the disc does not

match the number on the player, the disc cannot be used

• Insert a disc. (Check that “DVD,” “VCD,” or “CD” is lit in the DVD Player’s display.)

• Check the playable discs.

• Place the disc with the playback side

down.

• Place the disc within the proper guide on the disc tray.

• Eject the disc and clean it.

• Deactivate the parental lock function or

change the parental lock level.

• Eject the disc and clean it.

• Sometimes a small amount of picture

distortion may appear. This is not a malfunction.

• Connect the DVD Player directly to the TV. Avoid connecting the DVD Player to the TV through a VCR.

• Set the TV to the DVD Player’s input.

• Check the connections to the DVD Player.

• Before unplugging the power cord, press

STANDBY/ON and check that “--OFF--” disappears in the display.

• Resume normal playback.

• Switch off the main power, then switch it

on again. If not recovered, disconnect the mains lead, then connect it again.

–

• The setting will be effective the next time

a DVD is loaded.

Set the [Setup Menu Mode] to [Expert].

Pages

–

5 4

5 19

6 51-53

–

26-31

–

Page 58

Troubleshooting

Symptoms

No sound is reproduced.

The screen is stretched or aspect does not change.

DVD Player

Some MP3 tracks appear to be missing from a disc.

The buttons on the DVD Player operates but the buttons on the remote controller do not operate.

Remote Controller

Causes

• The Setup screen Audio menu [96 kHz PCM Out] setting is set to [96 kHz].

• The Setup screen Audio menu [Digital Out] is set to [Off].

• A wrong sound signal conversion method is selected.

• The pause mode is engaged.

• The volume level of TV or amplifier is set

to minimum.

• The DVD or CD is recorded in DTS audio.

• The multi aspect setting is not

appropriate.

• The TV is connected with an S-video cord.

• The track name does not end in “.mp3” or “.MP3”.

• More than 251 folders and tracks are

recorded on a disc.

• A multi-session disc is inserted.

• No batteries are inserted in the remote

controller.

• The batteries are worn out.

• The remote controller is not pointed at the

remote sensor of the DVD Player.

• The remote controller is too far from the DVD Player

Remedies

• Either connect using the analog outputs, or set [96kHz PCM Out] in the Audio menu to [96kHz 3 48 kHz].

• Set [Digital Out] to [On].

• Check the current sound signal

conversion method, and select the right setting.

• Press £ or 8 to exit the pause mode.

• Increase the volume level.

• DTS audio is only output from the digital

output jacks. Connect the digital output on the player to the digital input on a receiver or amplifier with a built in DTS decoder to hear DTS audio.

• Change the aspect setting in the [TV Screen] setting in the Setup screen Video 1 menu to the screen type most appropriate to the TV or monitor you are using.

• If you connected your TV with an S-Video cord, in rare cases the TV picture may appear stretched. In this case switch the output from [S2] to [S1]

• This system will not recognize file that does not end in ".mp3" or ".MP3" as an MP3 track. Change the track name.

• This player only recognizes the first 250 folders and tracks on a disc. If there are more folders/tracks than this, you will not be able to play them.

• This player is not compatible with multisession discs. If the disc is multi-session, you will only be able to play tracks recorded onto the first session.

• Insert new batteries.

• Replace with new batteries.

• Point the remote controller at the remote

sensor of the DVD Player.

• Operate the remote controller within 5 m

Pages

40, 41

–

9 9

Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity. If this happens, press the Power switch on the unit and then press it again after about five seconds.

Page 59

Specifications

DVD Player

Power supply AC 120 V, 60 Hz

Power consumption 14 W

Weight 3.4 kg, 7.5 lbs.

External dimensions 435 × 91 × 312 mm (W/H/D), 17-1/8" × 3-9/16" × 12-5/16"

Signal system Standard NTSC

Regional restriction code 1

Laser Semiconductor laser, wavelength 650 nm

Frequency range (digital audio) DVD linear sound: 48 kHz sampling 4 Hz to 22 kHz

96 kHz sampling 4 Hz to 44 kHz

Audio CD: 4 Hz to 20 kHz

Signal-to-noise ratio (digital audio) More than 100 dB

Audio dynamic range (digital audio) More than 96 dB

Harmonic distortion (digital audio) Less than 0.015 %

Wow and flutter Below measurable level (less than ±0.001 % (W.PEAK))

Operating conditions Temperature: 5°C to 35°C (41°F to 95°F), Operation status: Horizontal

Outputs

Video output 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1

S-video output (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1

Component video output (Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1

(PB)/(PR) 0.7 V (p-p), 75 Ω

Audio output (digital output Optical) –22.5 dBm × 1

Audio output (digital output Coaxial) 0.5 V (p-p), 75 Ω, pin jack × 1

Audio output (analog audio) 2.0 V (rms), 470 Ω, pin jack (L, R) × 2

Audio output (Mono) 2.0 V (rms), 470 Ω, pin jack × 1

Specifications and features are subject to change without notice.

Page 60

Integra Division of

ONKYO U.S.A. CORPORATION

18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com

Integra Division of

ONKYO CORPORATION

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222

SN 29343136A

W0111-2

Integra DPS-5.2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual