Integra CNP-1000, DTR-5.8 User Manual Addendum
SN 29344503
(C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved.
E
n
Y0704-1
* 2 9 3 4 4 5 0 3 *
Using XM Satellite Radio
Note:
Hardware and required monthly subscription sold separately. Other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only.
All fees and programming subject to change. Channels
with frequent explicit language are indicated with an
XL. Channel blocking is available for XM radio receivers by
calling 1-800-XMRADIO (US residents) and
1-877-GET-XMSR (Canadian residents).
For a full listing of the XM commercial-free channels
and advertising-supported channels, visit
lineup.xmradio.com (US residents) or xmradio.ca
(Canadian residents).
Subscriptions subject to Customer Agreement available
at xmradio.com (US residents) and xmradio.ca (Canadian residents). Only available in the 48 contiguous
United States and Canada. ©2007 XM Satellite Radio
Inc. All rights reserved. All other trademarks are the
property of their respective owners.
A warning against reverse engineering:
It is prohibited to, and you agree that you will not, copy,
decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any
technology incorporated in receivers compatible with
the XM Satellite Radio system. Furthermore, the
AMBE
®
voice compression software included in this
product is protected by intellectual property rights
including patent rights, copyrights, and trade secrets of
Digital Voice Systems, Inc. The software is licensed
solely for use within this product. The user of this or any
other software contained in an XM Radio is explicitly
prohibited from attempting to copy, decompile, reverse
engineer, hack, manipulate or disassemble the object
code, or in any other way convert the object code into
human-readable form.
Connecting the XM Mini-Tuner and Home
Dock
To receive XM Satellite Radio, you need an XM MiniTuner and Home Dock, which includes a home antenna.
These are sold separately. For connection information,
refer to the instruction manual supplied with the XM
Mini-Tuner and Home Dock.
Listening to XM Satellite Radio
®
(North American Models Only)
Important XM Radio Information
XM Satellite Radio offers an extraordinary variety of
commercial-free music, plus the best in sports, news,
talk and entertainment. XM is broadcast in superior
digital audio from coast to coast. From rock to reggae, from classical to hip hop, XM has something for
every music fan. XM’s dedication to playing the
richest selection of music is matched by its passion
for live sporting events, talk radio, up-to-the-minute
news, stand-up comedy, children’s programming,
and much more. For U.S. customers, information
about XM Satellite Radio is available online at
www.xmradio.com. For Canadian customers, information about XM Canada is online at
www.xmradio.ca.
XM Mini-Tuner jack
2
Setting the Satellite Radio Mode
Before you can listen to XM Satellite Radio, you must
set the Satellite Radio mode to XM.
Selecting XM Satellite Radio
Signing Up for XM Satellite Radio
Once you have installed the XM Mini-Tuner and Home
Dock, you are ready to subscribe to XM Satellite Radio.
You’ll need a major credit card and your XM Radio ID.
There are three places you can find your 8-character XM
Radio ID:
1. On the XM Mini-Tuner
2. On the XM Mini-Tuner packaging
3. On XM Channel 0, as explained below
Notes:
• RADIO ID cannot be selected in Category Search
mode. You must select Channel Search mode (see
page 3).
• The following letters are not used in XM Satellite
Radio IDs: I, O, S, F.
• XM Satellite Radio will transmit a special signal to
your AV receiver to activate the full channel lineup.
Activation normally takes between 10 and 15 minutes,
but during busy peak periods, you may need to leave
the AV receiver turned on for up to an hour.
1
On the AV receiver, press the
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “7. Hardware
Setup,” and then press [Enter].
The Hardware Setup menu appears.
3
Use the Up and Down [ ]/[ ]
buttons to select “3. Tuner,” and
then press [Enter].
The Tuner menu appears.
4
Use the [ ]/[ ] buttons to select
“XM.”
Pressing the [ ]/[ ] buttons cycles
through the following SAT options:
None o XM o SIRIUS.
None: Select if you’re not using
Satellite Radio.
XM: Select to use XM Satellite
Radio.
SIRIUS: Select to use SIRIUS Satel-
lite Radio.
Tuner Setup
/ Enter
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
7–3. Tuner
Satellite Radio None
5
Press the [Setup] button.
The setup menu closes.
1
Press the [Tuner] input selector
button repeatedly to select XM.
If “CHECK XM TUNER” appears on
the display, make sure the XM MiniTuner is connected properly.
1
Use the Tuning Up and Down
[ ]/[ ] buttons to select RADIO
ID.
Your XM Radio ID number is displayed. Write it below for reference.
ID
2
To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-438-9677
3
Selecting XM Radio Channels
There are three ways to select XM radio channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Note:
You cannot select Channel Search or Category Search
mode while the Tuning Arrow indicators are
flashing, as tuning is in progress.
■ Channel Search Mode
■ Category Search Mode
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
1
Press the [Receiver] button, followed by the [Enter] button to
select “Channel Search” mode.
2
Use the Up and Down [ ]/[ ]
buttons to select a channel.
You can also use the Left and Right
[ ]/[ ] buttons to select a category.
D TUN
Enter
ENT
Receiver
Number
buttons
Channel nameChannel number
1
Press the [Receiver] button, followed by the [Enter] button to
select “Category Search” mode.
2
Use the Left and Right [ ]/[ ]
buttons to select a category, and
use the Up and Down [ ]/[ ]
buttons to select a channel in
that category.
1
Press the [Receiver] button, followed by the [D TUN] button.
The [Receiver] button flashes.
2
Within 8 seconds, use the number buttons to enter the channel
number.
The channel is selected.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [ENT].
Note: While the [Receiver] button is
flashing, the input source cannot be
changed by using the remote controller.
Loading...