15MHz Programmable Function Generator
15MHz Programmable Function Generator
NEW
MAIN
SINE WAVE
TRIANGLE WAVE
SQUARE WAVE
SYNC OUTPUT
MODULATION
CHARACTERISTICS
AMPLITUDE
MODULATION
FREQUENCY
MODULATION
SWEEP
CHARACTERISTICS
TRIGGER
CHARACTERISTICS
VCF
GVC OUTPUT
FREQUENCY
COUNTER
MEMORY
INTERFACE
POWER SOURCE
ACCESSORIES
DIMENSIONS & WEIGHT
Output Waveforms
Frequency Range
Frequency Resolution
Frequency Accuracy
Output Impedance
Amplitude Range
Amplitude Accuracy
Amplitude Unit
DC Offset
DC Offset Accuracy
Duty Control
Duty Accuracy
Display
Distortion
Linearity Error
Asymmetry
Rise or Fail Time
Impedance
Level
Types
Waveform
Rate Frequency Range
Rate Frequency Accuracy
Rate Frequency Resolution
Symmetry
Symmetry Accuracy
Output Level
Sine Wave Distortion
Depth
Modulation Frequency Rate
Carries -3dB Bandwidth
External Sensitivity
Deviation
Modulation Frequency Rate
External Sensitivity
Sweep Range
Width
Rate
Symmetry Control
Mode
Sweep Output
Start/Stop Phase Range
Rate
Frequency Range
Ext Trig Frequency Range
Gate or Burst
Range
Input Linearity
Input Impedance
INT/EXT
Range
Accuracy
Time Base
Resolution
Input Impedance
Sensitivity
Sare/Recall
RS-232C
* Frequency Range 0.01Hz~15MHz
* Maximum Frequency Resolution 10mHz
* Frequency Accuracy 0.02% 5 Count
* Dual Displays Indicate Frequency and Amplitude
* Built-in 6 Digit Counter With INT/EXT Function up to
150MHz/High Resolution
* Output Waveforms Sine, Square, Triangle, Ramp, Pulse,
AM, FM, Sweep, Trigger and Gate or Burst
* VCF for 100:1 EXT Frequency Control
* INT/EXT AM/FM Modulation
* GCV Output for Synchronization
* Output Overload Protection
* RS-232C Interface Standard
Sine, Square, Triangle, Ramp, Pulse, AM, FM, Sweep, Trigger, Gate or Burst
10mHz~15MHz in 8 frequency range (auto switch)
15.0000MHz~1.5001MHz(100Hz);1.50000MHz~150,011CHz(10Hz);150,000kHz~15,001kHz(1Hz);
15.0000kHz~1.5001kHz(10mHz);1.50000kHz~150.01Hz(10mHz);15.00Hz~1.51Hz(10mHz);
1.50Hz~0.01Hz(10mHz)
0.02% 5 count
50 10%
10.00V ~ 0.01V(into 50 ) 4 amplitude rang; |Vac peak| + |Vdc| = 5V
Resolution : 10mV(10.00V ~ 0.01V)
3% 5count at 10Hz ~ 1MHz; 10% 5count at 1MHz ~ 15MHz
Vpp , Vrms , dBm
-5V ~ 5V (into 50 ); resolution 10mV
3% 3count at amplitude min.
80%: 20%:80% ~ 1MHz; resolution 1%
1% ~ 1MHz at 50% duty
Dual display for frequency 6 digits and amplitude 4 digits
0.5%(-46dBc) THE from 10Hz~ 100kHz;
<1% of full scale output at 100Hz
1% of period + 3nS
<18 nS
50 10%
>1Vp-p open circuit
AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type)
Sine, Square, Triangle, Ramp or Variable Symmetry Pulse
10mHz~10kHz in 3 frequency range (auto switch)
5% 1 count
10.0kHz ~ 0.1kHz(100Hz); 99Hz ~ 1Hz(1Hz);0.99Hz ~ 0.01Hz(0.01Hz)
90% : 10% : 90%; resolution : 1%
1 count( 1%)
1Vpp into 10k load
2% from 10Hz ~ 10kHz
0 ~ 100%
0.01Hz ~ 10kHz(INT) ; DC ~ 1MHz(EXT)
<100Hz to >5MHz
10Vpp for 100% modulation
0 ~ 15%
0.01Hz ~ 10kHz(INT) ; DC ~ 50kHz(EXT)
5Vpp for 15% deviation
15MHz ~ 150kHz; 1.5MHz ~ 15kHz; 150kHz ~ 1.5kHz; 15kHz ~ 150Hz; 1.5kHz ~ 15Hz;
150Hz ~ 1.5Hz; 15Hz ~ 0.15Hz; 1.5Hz ~ 0.01Hz
100:1(in same frequency range)
0.01Hz ~ 10kHz
90% 10% 90% ; resolution:1%
Linear /Log sweep
0 -5Vpp into 10k
80 ~ 90
0.1Hz ~ 10kHz
0.1Hz ~ 1MHz(Useful ~ 10MHz)
DC ~ 1MHz, TTL compatible input level
Implement by trigger setting
100:1(0 ~ 10V 1V)
<0.5% ~ 1MHz,<5% ~ 10MHz
10 k
To set the voltage between 0.2V ~ 2V as per different frequency in same frequency range
Switch selector
5Hz ~ 150MHz EXT
Time base accuracy 1 count
20ppm(23 C 5 C) after 30 minutes warm up
The maximum resolution is 100nHz for 0.1Hz and 1Hz for 100MHz
1M // 150pF
35mVrms(5 ~ 100MHz);
10 sets of front panel setting memories
AC115V/230V 15%, 50/60Hz
Power cord x 1,
290(W) x142(H) x 460(D)mm, Approx. 5kg
Instruction manual x 1,
45mVrms(100MHz~150MHz)
C2
-30dBc~15MHz;
GTL-101 x 2
* Variable DC Offset Control
* SYNC Output
* LIN/LOG Sweep Mode
(spec. applied form 1Vpp~10Vpp)
Loading...