Insignia NS-PMM6230 User Manual

ASSEMBLY GUIDE

Dual Screen Desktop Monitor Mount

NS-PMM6230

Before using your new product, please read these instructions to prevent any damage.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

VESA mount patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

STEP 1: Preparing the monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

STEP 2-Option 1: Attaching your monitor mount to a desktop edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

STEP 2-Option 2: Attaching your mount through a desktop grommet hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

STEP 3: Attaching the monitor support arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

STEP 4: Attaching the monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

STEP 5: Adjusting the monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

STEP 6: Managing cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

www.insigniaproducts.com

NS-PMM6230

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-PMM6230 represents the state of the art in monitor mount design and is designed for reliable and trouble-free performance.

IMPORTANT SAFETY INSTRUCTIONS

1 Make sure these instructions are read and completely understood before attempting installation. If you are unsure of

any part of this installation, please contact a professional installer for assistance.

2 The desk or mounting surface must be capable of supporting the combined weight of the mount and the display,

otherwise the structure must be reinforced.

3 Please check joint parts every two months, making sure the screws are loosened or not. 4 This product was designed to be installed on desk. Before installing, make sure the mount will support the combined

load of the equipment and hardware. Never exceed the maximum load capacity 17.6 lb. (8 kg), or else it may result in product failure or personal injury.

5 Note: This product is intended for indoor use only. Use of this product outdoors could lead to product failure or

personal injury.

6 WARNING: This product contains small items that could be a choking hazard if swallowed. Keep these items away from

young children.

7 WARNING: This product contains high pressure gas spring parts, please do not put it into fire, high temperature, or

disassemble it, which will lead to unexpected personal injury. The obsolete products can be sent back to the manufacturer or handed over to professional institutions.

8 To ensure the sealing performance of the gas spring, it is suggested to have complete adjustment to the upper arm

(with spring) one time or several times every month.

SAVE THESE INSTRUCTIONS

Features

• Adjustable height, angle, and horizontal position

• Integrated cable management clips

• Heavy-duty steel construction

• Supports most monitors up to 27-inch

• Fits monitors with 75 × 75 mm or 100 × 100 mm VESA mounts

• Maximum load capacity of each monitor plate is 17.6 lbs (8 kg)

WARNINGS:

• Do not attach your monitor mount to a glass-top table or desk. The weight of your mount and monitors may break the tabletop.

• Attach your monitor mount to a square or rectangular table or desk. Your monitor mount may not fit securely to an oval or irregularly shaped table.

• Do not attach monitor to your monitor mount that exceed the size and weight limitations. See

Specifications on page 14.

www.insigniaproducts.com

Dimensions

Max. 27.6" (70 cm)

6" (15.1 cm) 6" (15.1 cm)

±90°

20.1" (51 cm)

www.insigniaproducts.com

Package contents

Parts

Make sure that you have all the parts necessary to assemble your new monitor mount:

NS-PMM6230

# PART QTY. # PART QTY.

1 Monitor plate and support arm 1 10 Tube bottom cover 1

2 Fixed ring 1 11 Base support plate 1

3 Arm cable clips 4 12 Base support (clamp mounting) 1

4 Monitor plate and support arm 1 13 M10 nut (grommet hole mounting) 1

5 Arm support ring 2 14 Bottom plate (grommet hole mounting) 1

6 Tube cap 1 15

7 Cable support clip 2 16

8 Decorative cover 1 17 Tightening knob 1

9 Support tube 1

Padded mat feet (grommet hole mounting)

Mounting plate (grommet hole mounting)

www.insigniaproducts.com

+ 11 hidden pages