Insignia NS-PCSSDM7, NS-PCSSDM7-C Quick Setup Guide

QUICK SETUP GUIDE

SSD Mount

NS-PCSSDM7 / NS-PCSSDM7-C

Before using your new product,

please read these instructions to prevent any damage.

The NS-PCSSDM7 / NS-PCSSDM7-C SSD mounting bracket lets you install an SSD drive into a 3.5-inch drive bay in a desktop PC.

PACKAGE CONTENTS

• SSD drive bracket

• Screws (8)

• Quick Setup Guide

YOU'LL NEED

• Phillips screwdriver

INSTALLING THE SSD DRIVE IN THE DRIVE BRACKET

Note: We recommend that you use an anti-static bracelet to protect the data on the SSD drive.

1 Place your mounting bracket on a at surface

with the sides facing up.

2 Place the SSD drive (not included) on your

bracket. Make sure that the screw holes on the bottom of the SSD drive align with the holes on the bottom of your bracket.

SSD drive

3 Carefully turn the bracket and drive over. 4 Insert four screws through the holes on the

bottom of your bracket and into the holes in the drive, then use a Phillips screwdriver to tighten the screws.

SPECIFICATIONS

Dimensions (L × W × H): 3.9 × 4.0 × 0.46 in. (100 × 101.5 × 11.6 mm)

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 www.insigniaproducts.com

The SSD drive is ready to install into a PC. See the documentation that came with your PC for information about installing hard drives.

Note: Use the extra screws to secure the sides of your bracket to the PC drive bay.

Made in Taiwan

V2 ENGLISH 17-0698