Insignia NS-OS112 Quick Start Manual

Quick Setup Guide

2-Way Indoor/Outdoor Multipurpose Speakers

Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Indoor/Outdoor Multipurpose Speakers are designed for reliable and trouble-free performance.

Package contents

• 2-way indoor/outdoor multipurpose speakers (2)

• Adhesive-backed cushioned feet for speakers (8)

• Wall-mount brackets (2)

• Adhesive-backed cushions for mounting brackets (4)

• Screws (4)

• Knobs (4) (For wall mounting)

1 Connect your speakers

1 Connect the red speaker terminals to the red (+) amplier terminals. 2 Connect the black speaker terminals to the black (-) amplier terminals.

See the documentation that came with your amplier or home theater system for more information on connecting the cables.

Note: For best performance, speaker wires must be connected correctly. All two-conductor wire is marked in some way to help with this. One side will be marked with a colored stripe, raised rib, or dierent-color conductor. Use the marked side for the “red” connections. We recommend using 18-gauge or heavier speaker wire.

2 Position your speakers

Note: If not using the wall-mount brackets, attach the adhesive-backed

cushioned feet to the base of the speakers.

Optional:

Your NS-OS112 speakers can

be mounted to a wall, using

the wall-mount brackets

provided.

NS-OS112

• Quick Setup Guide

Before using your new product, please read

these instructions to prevent any damage.

Amplier/home theater system

Note: Make sure to

connect the + terminal on

the speaker to the + terminal on the amplier and connect the - terminal

on the speaker to the

- terminal on the amplier.

NOTE: If you are installing your

speakers outdoors, select

locations facing your listening

area that are protected from

rain and snow, and out of

direct sunlight.

Install wall-mount brackets (optional)

1 Screw the wall-mount brackets onto the wall where

you want to mount the speakers. If the location is backed by wooden wall studs, you can use the wood screws provided. If the location is backed by only dry wall, concrete, or other wall types, use wall anchors (not included).

2 Attach the adhesive-backed cushions to the brackets. 3 Slide a speaker into each mounting bracket. 4 Line up the screw holes (one on top, one on bottom),

then screw a knob into each hole to secure the speaker to the bracket. You can loosen the knobs to adjust the direction the speakers are pointing.

Safety information

• Never set the volume above the point of audio distortion or you could damage your speakers very quickly.

• If you hear distortion, immediately turn down the volume. If you do not, the resulting damage is not covered by the warranty.

Specications

• 8 ohm nominal impedance

• 90Hz - 20kHz frequency response

• Each speaker dimension: (without bracket)

7.4 H × 4.7 W × 4.1 D in.

(18.7 × 11.8 × 10.5 cm) (with bracket)

8.8 H × 4.7 W × 5.6 D in.

(22.3 × 11.8 × 14.2 cm)

• Each Speaker Net Weight:

(without bracket) 2.2 lbs (1 kgs) (with bracket) 2.4 lbs (1.1 kgs)

90-day limited warranty

Insignia Products warrants to you, the original purchaser of this Product, that this product shall be free of defects in material or workmanship for a period of ninety (90) days from the date of purchase as follows:

1 LABOR: During the Warranty Period if this Product is determined to be defective, Insignia will repair or replace the Product, at its option at no charge, or pay the labor charges to any Insignia authorized service facility. After the Warranty Period, you must pay for all labor charges.

2 PARTS: In addition, Insignia will supply, at no charge, new or rebuilt replacement parts in exchange for defective parts for the Warranty Period. After the Warranty Period, you must pay all parts costs.

To obtain warranty service, you must take the Product with your original receipt or other proof of purchase, either in its original packaging or packaging aording an equal degree of protection, to your nearest retail store location of the store or online web site from which you purchased the Product.

This warranty does not cover cosmetic damage or damage due to acts of God, lightning strikes, accident, misuse, abuse, negligence, commercial use, or modication of, or to any part of the Product, including the antenna. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than a facility authorized by Insignia to service the Product. This warranty does not cover Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses

or batteries). This warranty is valid only in the United States and Canada.

This warranty is invalid if the factory applied serial number has been altered or removed from the Product.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, REPRESENTATION OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights, and you may have other rights which vary from state to state, or province to province.

Contact Insignia:

For customer service, call 1-877-467-4289 www.insigniaproducts.com

INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave

V2 ENGLISH 13-0074