Insignia NS-40DR420NA16, NS-40DR420CA16, NS-48DR420NA16, NS-48DR420CA16 User Manual

40"/48" 1080p, 60Hz, LED Insignia Roku TV

USER GUIDE

Version 7.5 English NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Illustrations in this guide are provided for reference only and may differ from actual product appearance. Product design and specification may be changed without notice.

Before using your new product, please read these instructions to prevent any damage.

Contents

CHILD SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

The new standard in Smart TVs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Get the most out of your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the stands or wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing the stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing a wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Front features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Side jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Back jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

What connection should I use? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting a cable or satellite box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

HDMI® (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

AV (composite video) (good). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Coaxial (good). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting an antenna or cable TV (no box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting a DVD or Blu-ray player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

HDMI® (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AV (composite video) (good). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Connecting a game console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

HDMI® (best) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

AV (composite video) (good). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Connecting a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Connecting headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting external speakers or a sound bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Digital optical audio jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Digital audio using the HDMI 1/ARC jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

www.insigniaproducts.com

Contents

Connecting a home theater system with multiple devices . . . . . . . . . . . . . . . . . . . .30

Connecting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Aiming the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Guided Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Preparing for Internet connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Starting Guided Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Other options: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Connected TV Home screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Personalize your Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Non-connected TV Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Personalize your Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Benefits of connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Connecting brings out your TV's full potential!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

What is streaming? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

But what if I didn’t connect my TV?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Setting up Antenna TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Why do I have to set up the TV tuner? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

How do I set up the TV tuner? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Status light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Standby mode energy savings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Watching broadcast TV channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Changing channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Viewing program information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Adjusting settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Pausing Live TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Enabling Live TV Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Using Live TV Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Notes about Live TV Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Switching TV inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Auto-detecting devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Adjusting audio/video settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Playing content from USB storage devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Auto player launch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Playing content from local network media servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Adjusting TV settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

www.insigniaproducts.com

iii

Options menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Options menu settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Advanced picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Advanced picture settings menu options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Accessibility menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Changing privacy settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Resetting the advertising identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Limiting ad tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

My Feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Movies Coming Soon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Movies, TV shows, and people . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Searching for something to watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

How do I search? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

I found a show, now what?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Following on Roku. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Recent Searches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Contents

Using the Roku Channel Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Customizing your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Rearrange tiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Edit broadcast TV channel lineup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Rename inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Remove unwanted tiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Change themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Change the screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Change sound effects volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Configure power settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Power on settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Auto power off settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Turning the status LED off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Configure accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Captions mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Captions style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Audio Guide settings (U.S. models only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Configure parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Creating a parental control PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Blocking Movie Store, TV Store, and News (US TV models only) . . . . . . . . . . . . . . . . . 62

Blocking Broadcast TV shows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

What happens when a TV show is blocked?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Changing the parental control PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Resetting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

www.insigniaproducts.com

Contents

More settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Changing network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Changing time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Scanning for broadcast TV channels again . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Using your TV in a home theater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Turning off the speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Changing the audio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Setting up a digital audio connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Controlling other devices through CEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Restarting your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Resetting your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Reset audio/video settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Factory reset everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

What if I can’t access the Factory Reset option? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Network connection reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Changing your Roku Channel Store PIN preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Getting system updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Checking for updates on a connected TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Getting updates on a non-connected TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Getting and using the Roku mobile app . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Private Listening on the Roku mobile app . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Using a universal remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Cleaning your TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Cleaning your TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Roku . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

CEC-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

One-year limited warranty - Insignia Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

www.insigniaproducts.com

CHILD SAFETY

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

•

Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

•

As you enjoy your television, please note that all televisions - new and old - must be supported on proper stands or installed according to the manufacturer's recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

•

ALWAYS follow the manufacturer’s recommendations for the safe installation of your

television.

•

ALWAYS read and follow all instructions for proper use of your television.

•

NEVER allow children to climb on or play on the television or the furniture on which the

television is placed.

•

NEVER place the television on furniture that can easily be used as steps, such as a chest

of drawers.

•

ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

•

ALWAYS route cords and cables connected to the television so that they cannot be

tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

•

ALWAYS contact your retailer about professional installation if you have any doubts

about your ability to safely mount your television.

•

ALWAYS use a mount that has been recommended by the television manufacturer and

has a safety certification by an independent laboratory (such as UL, CSA, ETL).

•

ALWAYS follow all instructions supplied by the television and mount manufacturers.

•

ALWAYS make sure that the wall or ceiling where you are mounting the television is

appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

•

Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

•

Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.

•

ALWAYS place your older CRT television on furniture that is sturdy and appropriate for

its size and weight.

•

NEVER place your older CRT television on a dresser where children may be tempted to

use the drawers to climb.

•

ALWAYS make sure your older CRT television does not hang over the edge of your

furniture.

https://www.cta.tech/Consumer-Resources.aspx

Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.

This symbol indicates that this product incorporates double insulation between the hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.

1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15 The wall plug is the disconnecting device. The plug

must remain readily operable.

16 Remote control batteries should not be exposed

to excessive heat such as sunshine, fire, or the like.

17 The apparatus should not be exposed to dripping

or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus.

18 Your TV has four VESA mounting holes on the

back. If you attach a wall-mount bracket or TV stand to the back of your TV, the bracket or stand must be securely attached using all four holes. If you do not use all four mounting holes, your TV may fall and cause property damage or personal injury. See the documentation that came with your wall mount or TV stand for complete mounting instructions.

WARNING

Electric shock hazard

To reduce the risk of fire or electric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service technicians.

Lightning

For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges.

Power lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Handling the LCD panel

• Your TV’s screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LCD panel. If the screen breaks, be careful of broken glass.

• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

• If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

Safety check

After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company.

Servicing

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION

Damage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord or plug is damaged or frayed.

• If liquid has been spilled or objects have fallen into your TV.

• If your TV has been exposed to rain or water.

• If your TV does not operate normally by following the operating instructions. Adjust only those controls covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.

• If your TV has been dropped or damaged in any way.

• When your TV exhibits a distinct change in performance.

Outdoor antenna grounding

If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

1 Antenna lead-in wire

Grounding clamp Antenna discharge

unit

Grounding

conductors

5 Ground clamps

Power service grounding elec trode

system Electric service

equipment

Note to CATV system installer

Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides guidance for correct grounding. Specifically, it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

Condensation

Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV.

www.insigniaproducts.com

End of life directives

Your TV may contain materials that are regulated for environmental reasons. Your TV also contains materials that can be recycled and reused. To help protect the environment, contact your local authorities for information about disposal or recycling and about finding a recycler in your area before you dispose of your TV.

Non-active pixels

The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Welcome

Congratulations on the purchase of your new TV! Discover the joy of endless entertainment. After it's set up, you'll be able to access a world of streaming content channels that may include Netflix, YouTube, Crackle, CNET and literally thousands more.

Important

Your TV receives automatic updates from time to time, enabling new content and features. This User Guide describes Roku TV version 7.5. To determine the current version of your Roku TV, go to

Settings > System > About after you complete Guided Setup.

The new standard in Smart TVs

Welcome to TV like you've most likely never seen before—a home screen that you can personalize with your favorite devices and streaming channels. Choose from hundreds of thousands of streaming movies and TV episodes, plus music, sports, kids, family, international and much more. You should never run out of things to watch.

Note

A paid subscription or other payments may be required for some channels. Channel availability is subject to change and varies by country. Not all content is available in countries or regions where Roku products are sold.

Get the most out of your new TV

Follow these simple steps to get the most out of your new TV.

1 Connect to the Internet

• It's simple, it's easy, and it will unlock a world of entertainment. All you need is a wireless network. There are hundreds of free streaming channels, subscriptions services like Netflix and Spotify, convenient ways to rent or buy a favorite film or show with Google Play and Cineplex and more.

2 Pick your favorite streaming channels

• Find the entertainment you love. From the latest blockbuster movies to your favorite TV shows, with tons of live sports, a broad selection of music streaming channels, popular programming in a dozen international languages, 24x7 live news and so much more, your new TV has your sweet spot. A paid subscription or other payments may be required for some channels.

3 Personalize your home screen

• Put your favorite broadcast TV, streaming channels, gaming console and other devices front-and-center on the home screen. No more flipping through inputs or wading through complicated menus. You can even personalize the names of each input and move tiles around so your most-often used devices and streaming channels are only a click away.

4 Search for your favorite movie, TV show, actor, or director

• Once you’re connected to the internet, you can easily search across top streaming channels by movie or TV show title, actor or director—all from one place. Search results are organized by price so you can always see the best priced option. A paid subscription or other payments may be required for some channels.

5 Pause live TV

• Pause, resume, fast forward, and rewind TV shows. Simply connect your own USB drive with 16GB or bigger capacity to the TV and pause live TV for up to 90 minutes.

Note

Live TV Pause is available on digital TV shows received on the TV's antenna input only, and only when the TV is linked to a valid Roku account.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

6 Send your personal media to the big screen

• Send personal photos, videos, and music from your compatible smartphone or tablet to the TV screen in just a few taps. Plus, with Netflix and YouTube apps, send movies, shows, sport highlights, and more directly to your TV.

Note

The Roku app for Microsoft Windows devices does not cast videos.

7 Follow movies coming soon

• Use My Feed to choose from and follow a list of upcoming movies, and then watch for alerts each time one of your followed movies becomes available or changes price.

Note

My Feed is not available in the Roku App for Windows devices in the United States or Canada.

8 Take charge with a smartphone or tablet

• Control your TV with the included remote or from your compatible smartphone or a tablet with the free mobile app for iOS®, Android™, and Windows™ devices. Browse channels, view My Feed, and even search with voice via the free mobile app.

Note

Voice search and My Feed are not available in the Roku app for Windows devices.

Many features work with top mobile devices. Please see http://support.roku.com for device compatibility information. Let's get started.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Installing the stands or wall-mount bracket

• If you want to place your TV on a table or in an entertainment center, go to Installing the stands.

• If you want to mount your TV on a wall, go to Installing a wall-mount bracket.

Notes

• If you plan to wall-mount your TV, do not install the stands.

• Store the stands and stand screws in case you decide to use the stands in the future.

Installing the stands

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

2 Align the TV stands with the screw holes on the bottom of the TV, then secure the stands to the TV with the four

provided screws.

Model Screw type Screw length # of screws

40-in. ST4 20 mm 4 48-in. M5 15 mm 4

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Installing a wall-mount bracket

Warnings

• Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket to the back of your TV, the bracket must be securely attached, using all four holes. If you do not use all four mounting holes, your TV may fall and cause property damage or personal injury. See the documentation that came with your wall mount for complete mounting instructions.

• Your TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See Miscellaneous on page 82.)

1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen.

2 If the TV stands are installed, remove the four screws that secure the stands to your TV.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

15.7 in. (400 mm)

7.9 in. (200 mm)

3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that

came with the wall-mount bracket for information about how to correctly hang your TV.

Notes

• The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

• The mounting holes on the back of your TV take type M6 screws.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

MUTE

1 3

TV components

Your TV has built-in controls for adjusting basic settings and several sets of jacks for connecting devices to your TV.

This section contains information about:

•Package contents

•Front features

• Buttons

•Side jacks

•Back jacks

• Remote control

Package contents

• 40" or 48" LED TV

• Remote control and batteries (2 AAA)

•TV stands (2)

•Screws (4)

•Power cord

• Quick Setup Guide

• Important Information

Front features

Besides the viewing screen, the front has a remote control sensor, to receive the signals from the remote control (do not block), and a status indicator (see

Status light on page 46.)

Buttons

The controls on your TV enable you to perform simple functions, but are not a substitute for the remote control. Your TV has seven buttons on the bottom edge of the screen. From left to right, they perform the following functions:

# Item Press to...

Select among the configured TV inputs. Each press moves down one item. Also, while the Input

1 INPUT

panel is visible, the CH+ and CH– buttons move the highlight up and down. Pausing for a few moments selects the highlighted input.

MUTE Mute or unmute the sound.

3 VOL+/VOL–

CH+/CH–

(

power)

www.insigniaproducts.com

Press to increase or decrease the volume.

Go to the next or previous channel in the channel list. For more information, see Watching

broadcast TV channels on

page 46. OR Move the highlighted item up

down in the current menu. Press to turn your TV on or off

(standby mode). War ning: When your TV is off,

power still flows through it. To completely disconnect power, unplug the power cord.

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Side jacks

# Item Description

Connect an HDMI® device to this jack. For more information, see

HDMI® (best) on pages 17, 21, or 23

or Connecting a computer on page 25.

5 HDMI1/ARC

HDMI2

7 HDMI3

RESET

OR Connect an ARC-enabled home

theater receiver to this jack. For more information, see Digital audio

using the HDMI 1/ARC jack on

page 29. Connect an HDMI® device to this

jack. For more information, see

HDMI® (best) on pages 17, 21, or 23

or Connecting a computer on page 25.

Connect an HDMI® device to this jack. For more information, see

HDMI® (best) on pages 17, 21, or 23

or Connecting a computer on page 25.

Press and hold reset for 15 seconds for a factory reset. See What if I can’t

access the Factory Reset option? on

page 70.

# Item Description

Connect a digital sound bar, speaker system, or home theater

DIGITAL OUTPUT

(OPTICAL)

ANT/CABLE IN

3 USB 2.0

system to this jack to listen to TV audio through external speakers. For more information, see Digital

optical audio jack on page 28.

Connect an antenna or cable TV to this jack. For more information, see

Coaxial (good) on page 19 or Connecting an antenna or cable TV (no box) on page 20.

Connect a USB flash drive to this jack to view compatible photos and video and listen to music files. For more information, see Connecting a

USB flash drive on page 26 and Playing content from USB storage devices on page 49.

Connect headphones to this jack. See Connecting headphones on page 27.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Back jacks

# Item Description

Connect the video for an AV device to the VIDEO jack. For

1 VIDEO

AUDIO L and R

more information, see AV

(composite video) (good) on

page 18, 22, or 24. Connect the audio for an AV

device to these jacks. For more information, see AV (composite

video) (good) on page 18, 22,

or 24.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Remote control

# Button Description

(power)

(back)

If your TV is in Standby mode, turns power on. If your TV is on, puts TV in Standby mode.

The action depends on what you are doing with your TV:

Menu—Goes back to previous menu or screen. Home screen ti le—Moves highlight back to the Home

menu option. Watching Antenna TV or a TV input—Returns to the

screen from which the input was selected. Playing streaming content—Stops playing stream and

returns to the previous menu or screen. Browsing streaming content—Goes to the previous

level in the content tree.

# Button Description

—Moves the highlight up one item. —Moves the highlight down one item.

—Moves the highlight left, if possible (if a < hint

appears). When watching TV, displays your channel list. When playing most streaming videos, skips backward in the

and OK

(Game Mode)

(sleep)

(rewind)

(play/pause)

(home) Immediately returns to the Home screen menu.

(options)

video.

—Moves the highlight to the right, if possible (if a > hint

appears). When watching TV with the channel list displayed, dismisses

the channel list. When playing most streaming videos, skips forward in the

video. OK—Selects the highlighted option. When watching TV, this button displays information for the

current TV program.

First press displays a banner showing the current Game mode, if applicable, or Not available at this time. Subsequent presses toggle Game mode. When On, your TV performs less image processing and has less input lag. When Off, your TV performs more image processing and has more input lag, which is less desirable for action games. Note: Available only for HDMI® and AV inputs.

First press displays a banner showing the remaining sleep time, if any, or Sleep timer is off. Subsequent presses cycle among the preset sleep time intervals: 30 minutes, 1hour,

1.5 hours, 2hours, and 3hours. After setting the Sleep timer, the timer remains in effect regardless of what you are watching.

When playing streaming video that supports this feature, or broadcast TV if Live TV Pause is enabled:

• First press rewinds at 1x speed.

• Second press rewinds at 2x speed.

• Third press rewinds at 3x speed.

• Subsequent presses cycle through 1x, 2x, and 3x rewin d speed.

When playing streaming audio, jumps to the previous track/selection.

When any menu, tile, or channel in the channel list is highlighted, jumps up one page.

When using a virtual keyboard, jumps to the character at the top of the current column.

When playing streaming content, or broadcast TV if Live TV Pause is enabled, alternately pauses and plays the content.

Displays an Options menu, but only when the Options hint in the upper-right corner of the screen is not dimmed. The menu you see varies depending on what you are doing with your TV.

Also, in most cases, pressing while video is playing displays an Options menu over part of the screen where you can adjust various picture and sound settings.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

# Button Description

When playing streaming video that supports this feature, or broadcast TV if Live TV Pause is enabled:

• First press fast forwards at 1x speed.

• Second press fast for wards at 2x speed.

• Third press fast forwards at 3x speed.

• Subsequent presses cycle through 1x, 2x, and 3x

FEATURED CHANNEL

SHORTCUT

fast forward speed. When playing streaming audio, jumps to the next track/selection.

When any menu, tile, or channel in the channel list is highlighted, jumps down one page.

When using a virtual keyboard, jumps to t he character at the bottom of the current column.

Dedicated buttons show the logo of a featured streaming content provider. Pressing a button turns your TV on (if your TV is not already on), and if your TV is operating and is connected to the Internet, performs one of the following actions:

• D isplays the stream ing channel's main page if you have already added the channel to your Home screen.

• Displays the streaming channel's sign-up page if you have not already added the channel so that you can agree to any terms and fees for the service.

# Button Description

Turns volume up one setting with each press. Press and hold to turn volume up rapidly. A volume indicator shows the

(volume up)

(volume down)

volume level while you are adjusting the volume and for a few seconds afterward.

Note: If your TV is muted, pressing unmutes the sound.

Turns volume down one setting with each press. Press and hold to turn volume down rapidly. A volume indicator shows the volume level while you are adjusting the volume and fo r a few seconds afterward.

Note: If you r TV is muted, pressi ng does not unmute the sound.

Mutes and unmutes the TV sound. A volume indicator shows the current volume level and a mute icon when you press and for a few seconds after ward. If Closed captioning is set to When Mute, captions are displayed while your TV is muted.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

What connection should I use?

Your TV has several connection types for connecting devices to your TV.

For the best video quality, you should connect a device to the best available connection.

Use the following tables to identify cables:

Video

quality

Best (use this

if your devices

have HDMI®)

Good

Connection

type and

jack

HDMI®

video/audio

AV (composite

video) (requires

an audio

connection)

Cable connector

Connection

type and

jack

Digital optical

audio output

Analog audio

input

3.5mm analog audio output

Cable connector

Good

Coaxial

video/audio

Cautions

• Check the jacks for position and type before making any connections.

• Loose connections can cause poor audio or video quality. Make sure that all connections are tight and secure.

• The external audio/video devices shown may be different from your devices. If you have questions, refer to the documentation that came with your devices.

• Always turn off your TV when connecting external devices.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

HDMI® cable

Cable or

satellite box

Side of TV

HDMI® cable

connector

HDMI® jack

On your TV

Cable

wall jack

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 16.

You can connect your cable or satellite box using:

•HDMI® (best)

• AV (composite video) (good)

• Coaxial (good)

HDMI® (best)

1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI® cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the

cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.

Note

An HDMI® cable carries both audio and video. You do not need to use any audio cables.

www.insigniaproducts.com

AV (composite video) (good)

Cable or

satellite box

AV c able

Back of TV

AV c able

connector

AV jack

Audio cable

connectors

Analog

audio jacks

On your TV

Cable

wall jack

Notes

Cables are often color-coded to match color-coded jacks.

40"/48" 1080p, 60Hz, LED Insignia Roku TV

1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an AV cable (not provided) to the VIDEO jack and AUDIO L and R jacks on the back of your T V and to the AV

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 On the Home screen, press or to highlight the AV tile, then press OK.

and audio out jacks on the cable or satellite box.

Note

When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Cable or

satellite box

Coaxial cable

Side of TV

Coaxial cable

connector

ANT/CABLE IN

jack

On your TV

Cable

wall jack

Coaxial (good)

1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out jack

on the cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Set up the TV tuner to watch broadcast TV. See Setting up Antenna TV on page 43. 6 On the Home screen, press or to highlight the Antenna TV tile, then press OK.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Coaxial cable

Antenna or cable TV

(no box)

Side of TV

Coaxial cable

connector

ANT/CABLE IN

jack

On your TV

Connecting an antenna or cable TV (no box)

1 Make sure that your TV’s power cord is unplugged and all connected devices are turned off. 2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the antenna or cable

TV wall jack.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 On the Home menu, press or the highlight the tile for Antenna TV, then press OK. 5 Set up the TV tuner to watch broadcast TV. See Setting up Antenna TV on page 43. 6 On the Home screen, press or to highlight the Antenna TV tile, then press OK.

Notes

• Use a coaxial cable to eliminate interference and noise from radio waves.

• Do not bundle the coaxial cable with the power cord or other cables.

• If the antenna is not installed correctly, contact qualified service personnel to correct the problem.

• If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier.

• If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider.

• If you connect to cable TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable TV provider about upgrading to a set-top box.

• Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Side of TV

HDMI® cable

DVD or Blu-ray

player

HDMI® cable

connector

HDMI® jack

On your TV

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 16.

You can connect a DVD or Blu-ray player using:

•HDMI® (best)

• AV (composite video) (good)

HDMI® (best)

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI® cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the

DVD or Blu-ray player.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.

Note

An HDMI® cable carries both audio and video. You do not need to use any audio cables.

www.insigniaproducts.com

AV (composite video) (good)

AV cable

Back of TV

AV cable

connector

AV j ack

Audio cable

connectors

Analog

audio jacks

DVD or Blu-ray

player

On your TV

Note

Cables are often color-coded to match color-coded jacks.

40"/48" 1080p, 60Hz, LED Insignia Roku TV

1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an AV cable (not provided) to the VIDEO jack and AUDIO L and R jacks on the back of your TV and to the

3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player. 4 On the Home screen, press or to highlight the AV tile, then press OK.

AV OUT jacks on the DVD or Blu-ray player.

Note

When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

HDMI® cable

connector

HDMI® jack

Side of TV

HDMI® cable

Game console

On your TV

Connecting a game console

Many game consoles have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 16.

You can connect a game console using:

•HDMI® (best)

• AV (composite video) (good)

HDMI® (best)

1 Make sure that your TV’s power cord is unplugged and the game console is turned off. 2 Connect an HDMI® cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the

game console.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and the game console. 4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.

Note

An HDMI® cable carries both audio and video. You do not need to use any audio cables.

www.insigniaproducts.com

AV (composite video) (good)

Game console

Console-specific AV cable

Back of TV

AV cable

connector

Audio cable

connectors

AV jack Analog

audio jacks

On your TV

Note

Cables are often color-coded to match color-coded jacks.

40"/48" 1080p, 60Hz, LED Insignia Roku TV

1 Make sure that your TV’s power cord is unplugged and the game console is turned off. 2 Connect the game console’s AV cable (not provided) to the VIDEO jack and AUDIO L and R jacks on the back of your

TV and to the composite jack(s) on the game console.

Note

• Most game consoles come with a special AV cable. See the documentation that came with your game console or check the manufacturer’s website.

• When you connect the audio using the AUDIO L and R jacks, the audio output is analog.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and the game console. 4 On the Home screen, press or to highlight the AV tile, then press OK.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

HDMI® cable

Side of TV

HDMI® cable

connector

HDMI®

jack

On your TV

Connecting a computer

You can use an HDMI® jack on your TV to connect to a computer.

1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect an HDMI® cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the

computer.

3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer. 4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK. 5 Adjust the display properties on the computer, if necessary.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

USB flash

drive

Side of TV

Connecting a USB flash drive

You can use the USB 2.0 jack on your TV to view photos and videos and listen to music stored on a USB flash drive. You'll also need to connect a USB flash drive to enable Live TV Pause, if you choose to use this feature

1 Plug a USB flash drive into the USB 2.0 port on the side of your TV.

Caution

Do not remove the USB flash drive or turn off your TV while using the USB flash drive. You may lose data or damage the USB flash drive.



2 Press

or  to highlight the Roku Media Player or USB Media Player tile, then press OK.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Side of TV

Connecting headphones

When you connect headphones, your TV speakers are muted and sound only plays through the headphones.

Warning

Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.

• Connect the headphones to the jack on the side of your TV.

Note

You can also connect a home theater system, sound bar, or external speaker system to the jack.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Digital optical

audio cable

Digital speaker system

Side of TV

Digital optical

audio cable

connector

Digital optical

audio jack

On your TV

Sound bar

Connecting external speakers or a sound bar

When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or sound bar.

You can connect external speakers or a sound bar using the:

• Digital optical audio jack

• Digital audio using the HDMI 1/ARC jack

Digital optical audio jack

1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off. 2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your TV

and to the digital optical AUDIO IN jack on the digital speaker system or sound bar. 3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the

documentation that came with the digital speaker system or sound bar.

5 To turn off your TV speakers, on the Home menu, press or to highlight Settings, then press OK. Highlight

Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers

enabled check box.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

On your TV

ARC audio device

Sound bar

HDMI® cable

connector

HDMI®1 (ARC)

jack

Side of TV

HDMI® cable

Digital audio using the HDMI 1/ARC jack

Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers. When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or

sound bar.

1 Make sure that your TV’s power cord is unplugged and the digital speaker system or sound bar is turned off. 2 Connect an HDMI® cable (not provided) to the HDMI1 (ARC) jack on the side of your TV and to the HDMI IN jack on

the digital speaker system or sound bar.

3 Plug your TV’s power cord into a power outlet, then turn on your TV. 4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the

documentation that came with the digital speaker system or sound bar.

5 To turn off your TV speakers, on the Home menu, press or to highlight Settings, then press OK. Highlight

Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers

enabled check box. 6 To configure the HDMI1 (ARC) jack to output sound to an ARC device, on the Home menu, press or to highlight

Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.

Highlight HDMI ARC, then press OK to check the box.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

DVD or Blu-ray player

Cable or satellite box

AV receiver

Antenna or cable TV

connected directly to

the wall jack

Connecting a home theater system with multiple devices

You can connect an AV receiver and your devices to create a home theater.

The connections you make depend on the video and audio jacks available on your devices. Refer to the documentation that came with your devices for connection information.

Just remember to use the best connection types available for the best picture and sound. For information about connection types, see What connection should I use? on page 16.

For information about TV settings for home theaters, see Using your TV in a home theater on page 67.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Connecting power

You should connect devices before you connect the power cord. When you are adding devices, make sure that the power cable is unplugged from the power outlet.

1 Connect the AC power cord to the power connector on the back of your TV. 2 Connect the other end of the cord to a power outlet.

Caution

• Your TV should only be operated from the power source indicated on the label.

• Always unplug the power cord from the power outlet when you will not be using your TV for an extended period of time.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Installing remote control batteries

Open the back of your TV remote control and insert two AAA batteries, observing the proper orientation. Reattach the back cover.

Remote control on page 14 explains how to use the remote control in each of your TV’s operating modes.

Cautions

• Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.

• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

• Make sure that batteries are disposed of correctly. Do not burn or incinerate.

Notes

• Do not mix batteries of different types.

• Do not mix old and new batteries.

• Remove batteries when the charge is depleted.

• If the remote control is not going to be used for an extended period of time, remove the batteries.

Aiming the remote control

• Point the remote control towards the remote sensor on the front of your TV.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Guided Setup

With the preliminaries out of the way, it’s time to turn on your TV. As your TV starts for the first time, it leads you through Guided Setup, which configures your TV before you start to use it.

During Guided Setup, you’ll:

•Answer a few questions

• Provide network connection information

•Get a software update

• Link your TV to your Roku account.

• Connect devices such as a DVD player, game console, or cable box.

Note

Guided Setup only runs the first time you turn on your TV. If you need to run Guided Setup again, you'll have to perform a factory reset, as explained in Factory reset

everything on page 70.

Preparing for Internet connectivity

If you want to connect your TV to the Internet to watch streaming content, you must connect using a wireless modem/router or a wireless access point. The TV connects through a built-in wireless LAN adapter. The TV does not support a wired connection or the use of a USB network adapter.

We recommend that your wireless connection supports the IEEE 802.11b/g/n specification for the best experience.

Starting Guided Setup

To start Guided Setup, press the POWER button on the remote control to turn on your TV. When you first turn on your TV, it will take a few seconds to get itself ready. You’ll notice the following things happening:

1 The status light blinks every time your TV is busy doing something; in this case it's powering up and getting ready

for you.

2 The power-on screen appears and the status light blinks slowly for a few more seconds. The power-on screen

displays the Insignia Roku TV logo while your TV starts up.

3 After a few seconds, Guided Setup starts:

Tip

On TVs sold in the United States, if you are blind or visually impaired, you can activate the Audio Guide, a text-to-speech screen reader to help you navigate the TV's menus and commands.

To enable the Audio Guide, press the button on the remote control four times in rapid succession. Repeat to disable the Audio Guide. (The button is located directly below the directional pad on the right side of the Roku remote control.)

For more information on using the Audio Guide and adjusting its settings, see “Accessibility” on page 53.

4 If your TV prompts you for a language, press the DOWN arrow on the remote control to highlight your preferred

language.

www.insigniaproducts.com

Setting up your TV

With the first Guided Setup screen on your TV, follow these steps to set it up:

1 Press the OK or RIGHT arrow on the remote control to go to the next screen:

2 Press OK to select Set up for home use. Home mode is the right choice for enjoying your TV at home. It provides

energy saving options as well as access to all features of your TV.

Note

Store mode configures your TV for retail display and is not recommended for any other use. In store mode, some features of your TV are missing or limited. To switch from one mode to the other, you have to perform a factory reset as explained in

Factory reset everything on page 70, and then repeat Guided Setup.

40"/48" 1080p, 60Hz, LED Insignia Roku TV

After you select Set up for home use, your TV scans for the wireless networks within range and displays them in order, with the strongest signals first. In addition to your own wireless signal, your TV might pick up signals from your neighbors.

3 Press the UP or DOWN arrows to highlight the name of your wireless network, and then press OK to select it.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Other options:

• Connect to the Internet later —If you’re unable to connect to the Internet, that’s OK. You can skip this step and use your TV to watch broadcasts, play games, and watch DVDs. If you want to connect later, it's easy. We’ll show you how in Benefits of connecting on page 41. Connecting your TV enables you to choose from thousands of streaming channels so your TV really wants you to connect, and will try a couple more times to convince you that connecting is a good idea.

Note

If you decide not to connect, Guided Setup skips ahead to setting up the devices that you've connected to your TV. See Non-connected TV Home screen on page 40 to get started using your non-connected TV.

• Scan again / Scan again to see all networks—This option depends on the number of wireless networks within range.

• Scan again appears if the list already shows all available wireless networks within range. If you don’t see your wireless network name in the list, you might need to adjust the location of your wireless router or your TV, turn on your router, or make other changes. When everything is ready, select Scan again to see if your network name now appears in the list.

• Scan again to see all networks appears if your TV finds more than the strongest ones it initially listed. If you don’t see your wireless network name in the list, this option displays the complete list. If you still don’t see your network name, you might have your router configured to provide wireless service as a “private network.”

Note

Highlighting either of these options displays an informational panel with the unique media access control (MAC) address of your TV. You will need the MAC address if your wireless router is configured to use MAC address filtering.

• Private network—If your wireless network name is hidden, it won’t appear in the list. Select Private network to display an on-screen keyboard, and use it to enter your network name. Unless you changed the factory-set network name, you can find the name (also called SSID) on a label on the router.

4 If you select a network that is password-protected, an on-screen keyboard appears. Use the keyboard to enter the

network password.

Tip

Wireless networks that are password-protected display a “padlock” icon adjacent to the name. This icon enables you to know that you are going to be prompted to enter a password after you select that network.

5 After you submit your network password, your TV displays progress messages as it connects to your wireless

network, your local network, and the Internet.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

6 Your TV needs to know the local time zone so that it can correctly display time information about the program you

are currently watching. If your TV is unable to automatically determine the local time zone, it prompts you to choose your time zone from a list. Use the UP or DOWN arrows to highlight your time zone, and then press OK.

7 As soon as your TV is able to connect to the Internet, it downloads and installs its first software update, and then

restarts.

Tips

• Your TV automatically checks for updates periodically. These updates provide new features and improve your overall experience with your TV. After an update, you might notice that some options have moved, and that there are new options or features. This User Guide describes version 7.5. To determine your current Roku TV software version, go to Settings > System > About after you complete Guided Setup.

• You can download an updated User Guide that matches your TV software version from the Insignia web site at: www.insigniaproducts.com/support.html

After your TV restarts, it displays the Activation screen:

Note

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Why do I need a Roku Account?

You need a Roku Channel Store account for several reasons.

• It links you, your TV and your other Roku devices to the Roku Channel Store and billing service.

• Streaming content providers know that it’s OK to send content you request to your TV.

• Roku can automatically send updates to your device.

Important: It doesn’t cost anything to use and maintain your Roku Channel Store account (other than the cost of the TV and Internet access). Your TV is packed with hundreds of free channels. Adding a payment method now lets you easily rent or buy movies on demand, or try popular transaction-based streaming channels. You won’t be charged unless you agree to the terms and cost of the content. If you are concerned about unauthorized charges, you can set up a PIN that you must enter to authorize each charge.

8 Using a compatible computer, tablet, or smartphone

with an Internet connection, go to the web address displayed on the screen and enter the code that appears on your screen.

After you log in or create your Roku account, your TV gets an acknowledgement and adds your preexisting streaming channels, if any, to your TV. This process is automatic and takes a few moments—a little longer if you already have a lot of streaming channels to add.

Tip

Streaming channels from all Roku devices associated with your account are synchronized periodically, so all of your Roku devices have the same streaming channels (subject to compatibility with the device).

After it adds your selected streaming channels, your TV helps you set up the devices that you’re connecting to it, such as a cable box, Blu-ray player, or game console:

9 Press the OK or RIGHT arrow to proceed:

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

10 Connect all the devices you plan to use with your TV, turn them all on, and then select Everything is plugged in

and turned on. Your TV now takes you step by step through each of its inputs and asks what kind of device you

have connected. On each input that has a connected and active device, you can see its picture and hear its sound.

11 Press the UP or DOWN arrows to highlight the label you want to associate with the input, and then press OK to

move on to the next input.

You’re done with Guided Setup.

Tip

Some Roku TVs, depending on where you live and other factors, show you an introductory video filled with some great hints and tips. If you're not interested in viewing this video, press on the remote control to exit to the Roku TV Home screen.

When you finish Guided Setup, and whenever you press on the remote control, the Home screen greets you. From here, you can explore everything your TV has to offer. Press the arrow buttons to move around, and press OK to

select a highlighted item. We’ve designed your TV to encourage you to explore, and you can probably figure out most of the capabilities and settings on your own. If you have any questions or difficulties, you can find answers and solutions in this guide.

If you find yourself a long way from the Home screen, you can always get back right away by pressing one button: .

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Highlighted

item–Press OK to

select

Home menu

TV inputs

Press for

options when

available

Hint–Press

RIGHT to see

another screen

Streaming

channels and

apps

Connected TV Home screen

Here is a typical Home screen from an TV that’s connected to the Internet and paired with a Roku account.

Personalize your Home screen

Note

You can do a lot to personalize your Home screen and make it just right for you and your family:

• Add streaming channels by using the Streaming Channels menu option to browse the Roku Channel Store.

• Remove a tile by highlighting it and pressing . Then highlight Remove input or Remove channel and press OK.

• Reposition a tile by highlighting it and pressing . Then highlight Move input or Move channel and press OK. Use the arrow buttons to move the tile, and then press OK to lock it in its new location.

• Rename a TV input tile by highlighting it and pressing . Then highlight Rename input and press OK. Highlight a new name in the list, and then press OK to assign that name to the tile.

• Change the screen theme by going to Settings > Themes to find and pick one to suit your mood.

www.insigniaproducts.com

Non-connected TV Home screen

Highlighted

item–Press OK to

select

Home menu

TV inputs

Press for

options when

available

Hint–Press

RIGHT to see

another screen

Here is a typical Home screen from a TV that is not connected to the Internet.

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Personalize your Home screen

You can do a lot to personalize your Home screen and make it just right for you and your family:

• Remove a tile by highlighting it and pressing . Then highlight Remove input and press OK.

• Reposition a tile by highlighting it and pressing . Then highlight Move input and press OK. Use the arrow buttons to

• Rename a tile by highlighting it and pressing . Then highlight Rename input and press OK. Highlight a new name in

• Add streaming channels by browsing the Roku Channel Store (after connecting your TV to the Internet to add the

move the tile, and then press OK to lock it in its new location.

the list, and then press OK to assign that name to the tile.

Streaming Channels option to the menu).

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Benefits of connecting

Connecting brings out your TV's full potential!

Make any night a movie night

Thousands of movies to choose from, across all major streaming movie channels like Netflix, Cineplex Store, Crackle, and more. You’ll never run out of something new to watch.

Note

Get in the groove

Stream endless hours of music from channels free and subscription-based like Spotify and VEVO. With almost instant access to thousands of music artists, your favorite beats are just as close as your remote.

Explore your passions

In addition to popular streaming channels like YouTube, NHL, Sky News and Cineplex Store, your TV also offers hundreds of streaming channels to fuel your passions—including fitness, cooking, religion, outdoors, International programming and much more.

Enjoy FREE trials of popular channels

Your TV comes loaded with special offers, including free trials from popular streaming channels Netflix, Spotify, DailyBurn Fitness, and many more. But remember that you must cancel before the free trial ends to avoid subscription fees.

Take advantage of awesome features Live TV Pause lets you connect a USB drive (not provided) and pause live TV for up to 90 minutes. After pausing, you

can play, fast-forward, rewind, and pause again to any point within the rolling 90 minute window. Mobile Private Listening on the Roku app lets you listen to streaming programs on headphones (not provided)

plugged into your mobile device. Automatic Media Player Launch automatically starts the Roku Media Player when you insert a USB drive (not

included) with a recognizable file system (such as FAT16/32, NTFS, HFS+ or EXT2/3).

What is streaming?

Streaming is viewing or listening to video or audio content that is sent over the Internet, or located on a network-connected media server or on a USB device plugged into your TV’s USB port.

With streaming, you can by or rent most programs on demand, when it’s convenient for you. When streaming, you can play, pause, rewind, and fast forward whatever you are watching. You can also replay the last few seconds again, or turn on closed captions.

Tip

Some content cannot be paused or skipped. For example, if you are viewing live programming or a program that is supported by ads, you generally are not allowed to skip the ads.

Your TV lets you choose from thousands of streaming channels that offer a huge selection of entertainment:

• Thousands of movies and TV episodes

• Unlimited music, live and on-demand

• Tons of live and on-demand sports

• Commercial-free kids programming

• International programming in 22 languages

• 24x7 news and in-depth news commentary

Many streaming channels are free. Some streaming channels, like Cineplex and Amazon Instant Video, let you purchase or rent the latest movie releases or popular TV series. Some channels such as Netflix or Spotify charge a monthly subscription fee and others are free if you subscribe to a companion service through your cable or satellite provider. For example, HBO subscribers with participating broadcast TV provider accounts can add the HBO Go channel and watch it for free.

If you have an existing subscription to a service like Netflix or Spotify, you can just sign in with your existing user name and password.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

To play streaming content that is available on the Internet, you add streaming channels to your Home screen. To add a streaming channel to your Home screen, use the Streaming Channels option on the Home screen menu to go to the Roku Channel Store, and then select the streaming channel you want to add. The streaming channel is then added to your Home screen, and you can watch it at any time.

For more information on using the Roku Channel Store feature, see Using the Roku Channel Store on page 57.

Note

But what if I didn’t connect my TV?

What if you went through Guided Setup and chose Connect to the Internet later? No worries. Your TV makes it easy to connect whenever you want. As you move around the Home screen, you’ll see several places where you can start the connection process. For example:

• Now and then you'll see a message appear on the panel to the right of the Home screen offering a Connect Now option. Simply highlight and select the Connect Now option to get started.

•Use the Connect and activate now option in the Settings menu. From the Home screen menu, select Settings, Network, and then Connect and activate now.

• If you want to start over from the beginning, use the Settings menu to do a Factory reset, and then go through Guided Setup again. This time, choose your home network when prompted.

Regardless of how you connect, the process is the same. If you need details, see Step 3 on page 34 under Setting up

your TV.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Why does the TV need my time zone?

The TV needs to know your time zone so that it can correctly display time information about the program you are currently watching.

Setting up Antenna TV

Despite all of the entertainment possibilities of your TV, you may also want to watch broadcast TV. You watch broadcast TV in much the same way you watch other entertainment choices. You select a tile—the Antenna TV tile—from the Home screen.

The first time you select the Antenna TV tile, you have to set up the TV tuner. Setting up the TV tuner scans for active channels and adds them to your broadcast TV channel list.

Why do I have to set up the TV tuner?

You might be asking, “Why is this step necessary?” Good question. Not everyone needs to use the TV tuner. For example, you might have a set top box provided by a cable or satellite

company that receives all of your channels. Most of these set top boxes use an HDMI® connection. More and more people are watching only streaming TV and do not have a TV antenna or cable/satellite service. If you

don’t need the TV tuner, you can bypass setting it up and instead remove it from the Home screen as explained in

Remove unwanted tiles on page 59.

When you set up Antenna TV, your TV scans the signals on its antenna input for channels with a good signal, and adds those to the channel list, skipping dead channels and channels with a very weak signal.

Your TV will, however, let you add two analog channels, even if they have no signal. You might need to add these channels if you have an older set top box, VCR, or game console that can only output a signal on analog channel 3 or 4. These are the only channels that can be added regardless of whether they have a good signal. Typically, you'll only need one of these channels, but both are provided to make setup simpler. You can hide the one you don’t want as explained in Edit broadcast TV channel lineup on page 59.

How do I set up the TV tuner?

Setting up the TV tuner is easy—your TV does most of the work. You just have to answer a couple of questions.

1 Make sure your antenna (sold separately) or TV cable is connected to your TV’s ANT/CABLE input. 2 On the Home screen, select the Antenna TV tile. 3 Read the simple on-screen instructions and select Start finding channels.

4 If prompted, select your time zone. You'll only need to do this if your TV can’t figure

out your time zone from your Internet connection.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

5 When prompted, select whether to add analog channels 3 and 4 (to enable you to connect older set top boxes,

VCRs, or game consoles).

6 Wait while your TV scans for broadcast (antenna TV) stations...

… and then cable TV channels.

Scanning for channels can take several minutes.

Tip

Cable TV channels are channels from a cable TV provider that you can receive by connecting their cable directly to your TV (unscrambled NTSC, ATSC, and QAM channels, if you’re the kind of person who is interested in the details). In many cases, your cable provider probably requires you to use their set-top box and connect it to a different input, and then use the set-top box to tune your cable stations. In that case, you can skip scanning for cable channels.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

7 When the channel scans finish, your TV shows the number of channels it added.

Scanning for channels can take several minutes.

Tip

Repeat the channel scan from time to time to make sure you are receiving all of the latest channels. Broadcasters add and remove channels, move channels to different parts of the spectrum, and change the power levels of their channels periodically.

Note

You’ll have to repeat the channel scan if you remove the Antenna TV tile from the Home screen or perform a factory reset. To repeat the channel scan at any time, go to Settings >TV inputs >Antenna TV > Scan again for channels. Your antenna

reception and picture quality depend on the position of your antenna and on your location relative to the antennas of broadcasters in your area.

Now, you’re ready to watch broadcast TV! While you're watching, try the following:

• Press the UP and DOWN arrows to change channels.

• Press the RIGHT arrow to display the channel list and then use the UP and DOWN arrows to select a channel to watch. Or press REWIND or FAS T FORWA RD to jump through the channel list a page at a time.

• Press OK to display information about the current program.

• Press to switch to the previously tuned channel.

• Press to see options for picture and sound settings.

Note

If is not available on your remote control, you can use on the Roku App or the Jump Back button on a universal remote. For more information, see Other devices on page 72.

Remote control on page 14 has more information on using the remote control

buttons while watching TV.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Using your TV

This section provides information on using the day-to-day features of your TV.

Status light

Your TV has a single status light on the front panel. It goes on and off and blinks in different ways depending on the status of the TV, as shown in the following table:

TV condition Status indicator Meaning

On (screen is active) Off

Screensaver (screen is active, except when the Picture

Mode is set to Power Saver. Power Saver turns off the

backlight.) Off (no power) Off Your TV is not connected to power. Off (standby) On Your TV is connected to power and ready

Starting up from off state

On (receiving update from USB)

Remote control command received

Powering down to standby mode

Off

Slow pulsing blink until startup completes

Slow pulsing blink until update completes

Dims on/off once Your TV has received your command.

Slow pulsing blink until the TV reaches standby

Screen is indicating that your TV is on.

to use.

Your TV is doing something.

Standby mode energy savings

When you turn off your TV, it may remain in a higher power mode for a few minutes, after which it goes into a very low power standby mode. If you turn on the TV again before it has entered the very low power mode, it turns on immediately. After the TV goes into the lower power standby mode, it takes a bit longer to start up.

Watching broadcast TV channels

To watch broadcast TV, select the Antenna TV tile in the Home screen. Your TV remembers the last channel you watched and starts with that channel playing.

Tip

You also can use the buttons on the TV panel to select Antenna TV, as explained in

Buttons on page 11.

Changing channels

To change channels, you can do any of the following:

• Press the UP arrow to change to the next higher channel.

• Press the DOWN arrow to change to the next lower channel.

• Press the LEFT arrow to display the channel list, and then press the UP and DOWN arrows to move the highlight through the list one channel at a time. Or press REWIND and FAST FORWARD to move the highlight through the list one page at a time. When you’ve highlighted the channel you want to watch, press OK. (If you decide you don't want to change channels, press the RIGHT arrow or BACK button).

• Press to switch to the previously tuned channel.

Note

If is not available on your remote control, you can use on the Roku App or the Jump Back button on a universal remote. For more information, see Other devices on page 72.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Viewing program information

To view information about the current program, press OK. Your TV displays a banner at the bottom of the screen with as much information as is available in the program data stream, as shown in the following example.

Program information, subject to availability within the broadcast information, includes:

• Channel number

• Channel call sign

• Signal strength

• Program title

• Start time, end time, and graph of program length showing current position

• Content rating

• Video resolution (480i, 480p, 720p, 1080i, 1080p)

• Dolby Audio™

• Audio features (SAP)

•Closed captioning (CC)

•Current time

• Program description. If the entire description does not fit, press OK to expand the size of the banner and see the entire description.

Tip

If you've set up Live TV Pause, and you're watching broadcast TV, you'll also see a progress bar showing the current playback position within the rolling 90-minute pause time. For more information, see "Pausing Live TV" on page 47.

Adjusting settings

Press to display the Options menu. Press the UP and DOWN arrows to highlight an option, and then press the LEFT and RIGHT arrows to change the setting. Adjusting TV settings on page 50 explains each of the settings in detail.

Pausing Live TV

Using Live TV Pause, your Roku TV gives you the ability to pause, play, fast forward, and rewind digital broadcast TV. You can pause live TV for up to 90 minutes.

Requirements

To use this feature, you need to:

1 Connect your TV to the Internet. If you didn't connect during Guided Setup, see “But what if I didn’t connect my

TV?“on page 42.

2 Provide your own dedicated USB drive with the following minimum specifications.

•16 GB

• 15 Mbps read/write speed

• USB 2.0 compliant A USB flash drive (thumb drive) meeting the minimum requirements is highly recommended. However, using a

larger drive does not extend the 90 minute pause time.

Important

All existing content on your USB drive are erased when you enable this feature.

3 Enable Live TV Pause

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Time at current playback position

Current playback position

Extent of pause time (up to 90 minutes)

90 minute mark (max pause time)

Current time

Enabling Live TV Pause

You can enable Live TV Pause in several ways:

•Go to Settings > TV inputs > Antenna TV > Live TV Pause, and then select Enable.

• After completing a channel scan, select Set up Live TV Pause from the available options.

• Press the Play/Pause button on the Roku remote while watching a digital broadcast TV channel.

• Highlight the Antenna TV tile on the Home screen, press on the remote control, and then select Enable Live TV Pause.

After starting Live TV Pause setup in any of these ways, the TV prompts you through the steps needed to enable this feature. Setup takes only a few moments.

Note

Use of a USB hub is not supported.

Using Live TV Pause

If you have used the Roku remote control to watch streaming channels, using Live TV Pause should be very familiar to you.

• While watching a digital broadcast TV channel, press the PLAY/PAUSE button to pause or play the content. After the TV program has been paused for 90 minutes, the TV resumes playing.

• After watching a channel for a while, press REWIND to jump back up to the point where you first started watching the channel, up to 90 minutes.

• After pausing or rewinding, press FAST FORWARD to jump ahead up to the point where you are once again watching the live TV program.

• Press FAST F ORWARD or REWIND repeatedly to cycle through 1x, 2x, and 3x skip speeds. Press the INSTANT

REPLAY button to play back the last several seconds of the program.

Note

If is not available on your remote control, you can use on the Roku App or the Jump Back button on a universal remote. For more information, see “Other

devices“on page 72.

Whenever you use any of the Live TV Pause features, the TV momentarily displays a progress bar:

The progress bar also displays tick marks at each half hour point, to help you locate the boundaries where one show ends and a new one begins.

Notes about Live TV Pause

• You can use Live TV Pause only with digital broadcast and cable channels received through the TV's Antenna input (ATSC and Clear QAM channels).

• Changing channels, erases and restarts the Live TV Pause buffer.

• Returning to the Home screen, selecting another input, or turning off the TV erases and resets the Live TV Pause buffer.

• Removing the USB drive erases the Live TV Pause buffer.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Switching TV inputs

Switch to a TV input to access the device connected to that input, for example, a Blu-ray player. Switching inputs is as simple as highlighting the input’s tile in the Home screen, and pressing OK. The video signal on the input, if any, appears on the screen.

Tip

You also can use the buttons on the TV panel to select a TV input, as explained in

Buttons on page 11. Customizing your TV on page 58 explains how to rename and

remove inputs.

Auto-detecting devices

Your TV automatically detects when you connect a new device to an HDMI® input and turn on its power. The input is automatically added to the Home screen if it isn’t already present.

Adjusting audio/video settings

While watching video content on any input, press to display the Options menu. Press the UP and DOWN arrows to highlight an option, and then press the LEFT and RIGHT arrows to change the setting. Adjusting TV settings on page 50 explains each of the settings in detail.

Playing content from USB storage devices

Your TV has a USB port that can be used to play personal music, video, and photo files from a personal USB flash drive or hard disk. If your TV is connected to the Internet, your Home screen has the Roku Media Player tile. If your TV has not been connected to the Internet, the Home screen has the USB Media Player tile.

To use this feature, first make sure your media files are compatible with the Roku/USB Media Player. As of the publication date of this guide, the following media file formats are supported:

• Video—MKV (H.264/262), MP4, MOV (H.264)

• Music—AAC, MP3, WMA, WAV (PCM), AIFF, FLAC, and AC3, and DTS

• Photo—JPG, PNG (up to 4k x 4k pixels) To see the latest list of supported formats, view Help in the Media Player.

Notes

• The Roku/USB Media Player displays supported file types only, and hides file types it knows it cannot play.

• There are many variants of each of these media formats. Some variants may not play at all or may have issues or inconsistencies during playback.

• DTS audio, whether in music or video files, is supported only by pass-through, meaning that your TV cannot directly output the sound of a DTS file, but can pass it through to a DTS-compatible receiver that is connected to the HDMI1 (ARC) or SPDIF connector on your TV.

Auto player launch

If your TV is connected to a Roku account, you can set it to automatically open the Roku Media Player when you connect a USB drive with a recognizable file system (such as FAT16/32, NTFS, HFS+ or EXT2/3). To configure this setting, from the Home screen, navigate to Settings > System > USB media. At this point, the following options are available:

• Auto-launch - Choose Prompt, On, or Off, as desired.

• Prompt - (default) Display a prompt each time a recognized USB drive is connected. The prompt provides options to launch the Roku Media Player as well as to change future auto-play behavior.

• On - Always launch the Roku Media Player whenever you connect a recognized USB drive.

• Off - Never launch the Roku Media Player automatically

• Launch channel - Choose the app you want to use to play back media files.

Playing content from local network media servers

If you have connected your TV to a network, it can play personal video, music, and photo files from a media server on your local network. Media servers include personal computers running media server software such as Plex or Windows Media Player, network file storage systems that have built-in media server software, and other devices that implement the specifications of the Digital Living Network Alliance. Some servers do not fully implement the DLNA specification but are UPNP (Universal Plug and Play) compatible. The Roku Media Player will connect to them as well.

Some media servers can convert files into Roku compatible formats. DRM-protected content is not supported.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Adjusting TV settings

You can adjust most picture and sound settings while you are watching a program by pressing to display the Options menu. If you don’t find what you need, there are additional picture and sound settings in the Settings menu.

In most cases, the changes you make apply only to the input you are using. Antenna TV, each separate HDMI® input, and the AV input have their own settings that your TV remembers when you return to that input. Your TV also remembers the settings you specify while viewing streaming content.

Settings menu

Use the Settings menu to adjust overall TV settings. Press to go to the Home screen, and then navigate to Settings>TV picture settings.

You can adjust the following overall TV picture settings from the Settings screen:

• TV brightness—If the lighting level in your TV room changes, use this setting to help provide a better viewing experience; set to darker for a darker room, and brighter for a brighter room. Choose among Normal and four other settings to make the overall picture brighter or darker. So that you don’t have to make this type of change for each TV input one at a time, this setting increases or decreases your TV’s general brightness across all TV inputs. This setting is identical to the TV brightness setting you can access in the Options menu while watching a program.

• Settings per input—This section of options lists each TV input. Select an input to switch to that input. Then press to display the Options menu, where you can adjust the input's settings while watching a live picture and listening to the sound from that input.

Tip

You don’t have to go to the Settings menu first—you can display an input's Options menu and adjust its settings whenever you are watching the input by pressing .

Options menu

The Options menu for each TV input provides settings for controlling the appearance of the picture and the quality of the audio.

To view the Options menu, press whenever you are watching a TV input or streaming a video. The Options menu is a panel that appears over the left side of the screen:

To adjust the settings on the Options menu, press the UP or DOWN arrow to highlight a setting, and then press the LEFT or RIGHT arrow to change the setting. You’ll notice the changes you make right away in picture appearance or audio quality.

Tip

When you highlight a setting, the header text explains the effect of its current value. When you begin to adjust a setting, the other options are hidden so you can see more of the screen. Even though the other settings are hidden, you can move the highlight up or down to adjust the other settings.

Options menu settings

• TV brightness—Affects the overall brightness of the picture. This setting applies across your entire TV; that is, to all TV inputs and is identical to the TV brightness setting under Settings > TV picture settings.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

• Picture mode—Provides picture presets for various viewing preferences. This setting applies to the currently-selected input only.

Note

The Low power option reduces the amount of power your TV consumes. For more information about picture modes, see Advanced picture settings menu options on page 52.

•Picture size - Adjusts the aspect ratio of the picture, enabling you to view a picture in its original format, or zoom or stretch it to fill the screen. The Auto setting has been found to produce the best picture in most cases.

• Audio effect—Adjusts the sound quality output from the your TV speakers. This setting applies across your entire TV; that is, to all TV inputs. It does not affect the sound quality for headphones, HDMI1 (ARC), or SPDIF (TOSLINK) connectors.

• Sleep timer—Sets a timer that turns off your TV after the specific amount of time. This setting remains in effect even if you stop watching the current input.

• Closed captioning—Controls when you see captions. This setting is only offered for Antenna TV, the AV input, and streaming videos. Any set value remains in effect across only these inputs.

• Antenna TV—Turn captions on or off, or set them to appear only when your TV sound is muted.

• AV input—Turn captions on or off, or set them to appear only when your TV sound is muted.

• Streaming video channel—Turn captions on or off, set them to appear only when your TV sound is muted, or only during instant replay (for streaming content that supports instant replay).

Tip

If the Instant Replay button is not available on your remote control, you can use

on the Roku App or the Jump Back button on a universal remote. For more information, see Other devices on page 72. Additional captioning options are provided in the Captions screen in Settings>Accessibility..

• SAP—Selects whether to play a secondary audio program or multichannel television sound, and which choice to play. This setting applies only to Antenna TV on digital channels.

Tip

To dismiss the Options menu, just wait a few seconds without pressing any buttons. Or press again to dismiss the menu immediately.

Advanced picture settings

The Advanced picture settings menu for each TV input provides settings for fine tuning the appearance of the picture. All of the settings in this menu apply only to the currently-selected input.

To use the Advanced picture settings menu, first press to display the Options menu. Then select Advanced picture settings.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

To adjust the settings on the Advanced picture settings menu, press the UP or DOWN arrow to highlight a setting, and then press the LEFT or RIGHT arrow to change the setting. You’ll notice the changes you make right away in picture appearance.

Tip

Advanced picture settings menu options

• Picture mode—Provides picture presets for various viewing preferences. This setting duplicates the one on the Options menu. When you change the Picture mode, other picture settings adjust accordingly.

For example, setting the Picture mode to Vivid sets Brightness, Contrast, Sharpness, and other values to produce a very vibrant picture. Setting Picture mode to Movie changes these same settings to produce a picture suitable for enjoying movies in a darkened room.

If you make changes to the individual picture settings—for example, Contrast or Sharpness—these settings are saved for the current input and the current picture mode. In this way, the HDMI 1 input's Movie picture mode can be customized and different than the HDMI 2 input’s Movie picture mode and Antenna TV’s Movie picture mode.

Low power is a power-saving picture mode that reduces power consumption by about 10%. When you use Low power, you'll notice that your TV's picture is a little dimmer than the brightest picture modes (Vivid and Normal).

Use Reset picture settings, described below, to return the input’s current picture mode to its original values.

• Dynamic Contrast—Automatically adjusts the backlight level to achieve the optimum contrast and prevent excessive differences between light and dark areas of the screen. The Backlight option is disabled when Dynamic Contrast is enabled.

• Backlight—Adjusts the overall light intensity of the screen.

• Brightness—Adjusts the dark level of the black areas of the picture.

• Contrast—Adjusts the white level of the light areas of the picture.

• Sharpness—Adjusts the sharpness of the edges of objects in the picture.

• Color—Adjusts the intensity of colors in the picture. A setting of 0 removes all color and displays a black and white picture.

• Tint—Adjusts the color balance from green to red to obtain accurate colors in the picture.

• Color temperature—Adjusts the overall colors in the picture from more reddish (Warm).

• Game mode—Controls whether Game mode is on or off. When On, your TV performs less image processing and has less input lag. When Off, your TV may perform more image processing and has more input lag, which is less desirable for action games. Available only for HDMI® and AV inputs.

• Reset picture settings—Returns all picture settings for the input's currently-selected Picture mode to their original values.

Tip

To dismiss the Advanced picture settings menu, just wait a few seconds without pressing any buttons. Or press again to dismiss the menu immediately.

Normal to slightly more bluish (Cool) to slightly

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Accessibility

The settings on the Accessibility menu enable you to change the TV's accessibility settings without leaving the program you are watching. These settings are also available on the Home screen under Settings > Accessibility.

To enab le the Audio Guide (U.S. models only), press on the remote control four times in rapid succession. Repeat to disable the Audio Guide. (The button is located directly below the directional pad on the right side of the Roku remote control.)

Accessibility menu settings

• Audio Guide (U.S. models only) —Turn the Audio Guide on or off. The Audio Guide is a text-to-speech screen reader that helps blind and low-vision users navigate the Roku user interface and on-screen menus. When enabled, the Audio Guide reads out text, menus, and other on-screen items.

Tip

If Shortcut is enabled, you can enable or disable the Audio Guide by pressing the Option button four times in quick succession.

• Speech rate—Choose the speed at which the TV speaks Audio Guide prompts.

• Vol ume —Set the volume of the Audio Guide in relation to the main TV volume.

• Shortcut—Enable or disable the shortcut feature. When disabled, pressing the Option button four times in quick succession does not enable or disable the Audio Guide.

• Closed captioning—Controls when you see captions. This setting is only offered for Antenna TV, the AV input, and streaming videos. Any set value remains in effect across only these inputs.

• Antenna TV—Turn captions on or off, or set them to appear only when the TV sound is muted.

• AV input—Turn captions on or off, or set them to appear only when the TV sound is muted.

• Streaming video channel—Turn captions on or off, set them to appear only when the TV sound is muted, or only during instant replay (for streaming content that supports instant replay).

Note

If the Instant Replay button is not available on your remote control, you can use

on the Roku App or the Jump Back button on a universal remote. For more information, see “Other devices“on page 72. Additional captioning options are provided in the Captions screen in Settings.

• Captioning track—Selects which caption track to display when Closed Captioning is on. This setting remains in effect on all inputs that provide captions.

• SAP—Selects whether to play a secondary audio program or multichannel television sound, and which choice to play. This setting applies only to Antenna TV on digital channels.

Note

For more information about accessibility, call Customer Care at 877-467-4289.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Changing privacy settings

By default, when connected to the Internet and activated with your Roku account, the TV uses an advertising identifier to track your usage behavior. You can change the privacy settings on your TV in two ways: resetting the advertising identifier and limiting ad tracking.

Note

Privacy settings are not present on TVs operating in non-connected mode.

Resetting the advertising identifier

Resetting the advertising identifier has the effect of clearing your prior usage history and starting over. From that point forward, your new usage patterns affect the advertisements you see on your TV.

To reset the advertising identifier:

1 From the Home screen menu, navigate to Settings > System > Privacy. 2 Highlight Reset advertising identifier. Press to view more information about this option. When you finishing

reading the information, press OK to close the More Information window.

3 Press OK to reset the advertising identifier, and then press OK again to dismiss the verification message.

Limiting ad tracking

You can limit Roku’s tracking of your usage behavior by limiting ad tracking. When you do, your TV will display ads that are not personalized based on your TV’s advertising identifier.

To limit ad tracking:

1 From the Home screen menu, navigate to Settings > System > Privacy. 2 Highlight Limit ad tracking. Press to view more information about this option. When you finish reading the

information, press OK to close the More Information window.

3 Press OK to select the Limit ad tracking option.

Note

If you perform a factory reset and then reconnect your TV, ad tracking is restored until you repeat these steps.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

My Feed

Use My Feed to find out when you can watch movies coming soon, and to get updates on movies, TV shows, and actors that you are following.

Movies Coming Soon

My Feed gives you updates on your list of movies that are coming soon to theaters. With My Feed, you’ll know when your favorite movie is ready to stream, the channels it is on, and how much it will cost.

Select the movies you want to follow by going to My Feed > Movies Coming Soon. You’ll then see a list of newly released movies that are not yet available for streaming. Select a movie, and then select Follow this movie on Roku. When you return to the main My Feed screen, you’ll see banners for each of your newly-followed movies along with banners for movies and TV shows you’re already following.

Movies, TV shows, and people

In addition to following movies coming soon, you can follow any movie, TV show, or actor. To do this, use the Search feature to find the movie, TV show, or name that you want to follow, and then select Follow this movie/TV show/person on Roku. For more information, see Searching for something to watch on page 55.

Note

The TV takes a bit of time to update your newly-followed shows. Until it finds at least one channel offering the movie, the content banner in My Feed shows Check back later for updates.

My Feed alerts you any time a movie or TV show you are following becomes available on another channel and whenever its price changes. A number in parentheses next to My Feed in the Home menu means that My Feed has updated information that you haven’t viewed yet. For example, you if three of your followed shows have updates, you’ll see My Feed (3).

Note

When a movie or TV show you are following becomes available, the streaming channel offering the movie might require that you subscribe or pay a fee to view it.

Tip

My Feed is available only if your TV is connected to the Internet.

Searching for something to watch

Searching for movies and shows across multiple streaming channels is one of the unique features of your TV. Within a single search operation, you can search by:

•Movie name

•TV show name

• Actor or director name

• Streaming channel name

•Game name

Tip

Roku Search is available only if your TV is connected to the Internet.

Note

Roku Search doesn’t search across all streaming channels, but searches across lots of popular streaming channels. The actual channels it searches vary by locale, but include popular providers such as Netflix and several others, with more being added all the time.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

You can check which streaming channels are included in Roku Search by going to the Search screen, clearing all previous searches to reveal the search instructions, and then watching the channel tiles cycle at the bottom of the screen.

To search, select Search on the Home screen menu. The Search screen has a keyboard grid and initially displays instructions—a set of icons representing search categories and a list of participating provider tiles.

Tip

If you don’t see the instructions, navigate to the end of the list of recent searches and select Clear recent search selections.

How do I search?

To search, use the arrow buttons to navigate the on-screen keyboard, entering a few characters of the search term. With each additional character you enter, you narrow down the search and the search results become more relevant.

Tip

Use the free Roku mobile app on your compatible smartphone or tablet to make searching even faster. Not only can you use your device’s keypad to type, you can search simply by touching a voice search icon and saying the name of the movie, TV show, actor or director, channel, or game.

An icon next to each search result shows the category of the result (movie, TV show, actor).

• Press the RIGHT arrow to highlight the search results.

• Press the UP and DOWN arrows to scroll through the list of search results to highlight the item you want to view.

I found a show, now what?

Now that you’ve highlighted the show, movie, actor, game, or streaming channel you were looking for, press the RIGHT arrow. If your search result was an actor, director, or other item that does not represent a single item of content, you'll see another list to narrow down your search. Continue highlighting results and pressing the RIGHT arrow until you find a single, viewable content item.

An HD logo means that the content is available in high-definition. The checked circle adjacent to the title means you have already added the streaming channels.

When you narrow down your search to a game or streaming channel, you’ll see detailed information, images, and available actions such a list of streaming channels and the cost of getting the item on each channel.

Note

Some channels may require a subscription.

Following on Roku

Rather than watch the show you found in Search, you can add it to My Feed and wait until it’s available on a particular streaming channel or available at a better price. From the search results screen, select Follow on Roku. Then go to My Feed periodically to check for updates to each of your followed movies, TV shows, or people. For more information, see

My Feed on page 55.

Recent Searches

The next time you use Roku Search, the Search screen displays a list of recent search selections in place of the search instructions.

Using the recent search selections list makes it easy to quickly get to a previously found item, for example, to find another movie with the same actor, or another TV show in the same series.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Using the Roku Channel Store

The Streaming Channels menu option takes you to the Roku Channel store, where you can add new streaming channels to your TV.

Tips

•The Streaming Channels menu option is available only if your TV is connected to the Internet.

• You also can search for streaming channels by using the Search option, as explained in Searching for something to watch on page 55.

To make it easier to find what you want, the streaming channels in the Roku Channel Store are categorized by topic. Press the UP and DOWN arrows to highlight the category you want, and then press the RIGHT arrow to move the highlight into the grid of streaming channel tiles.

When you find a streaming channel you want to add or learn more about, highlight it and press OK to display more details.

• If the streaming channel you are adding is free, you can select Go to channel to start watching it immediately.

• If there is a one-time or recurring fee associated with using the streaming channel, you must agree to the terms and conditions, accept the fee, and—if you created one when you activated your TV, enter your Roku PIN code to authorize the charges.

• If you already have a subscription to the streaming channel—for example, you already subscribe to Netflix or you receive HBO through your cable TV provider—you must complete a different, simple authorization step to add the streaming channel.

You only have to complete the authorization or activation step one time, when you initially add the streaming channel. After that, you simply select the streaming channel tile from your Home screen to start watching. (Channel and content availability is subject to change. Charges may apply to your selection.)

Tip

New streaming channels are added continuously, so be sure to check back every now and then.

Note

If you don’t remember your PIN, or if want to change whether you need to use a PIN to make purchases on your Roku account, see Changing your Roku Channel Store PIN

preference on page 70.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Customizing your TV

There are several things you can do to personalize your TV.

Rearrange tiles

Whenever you add a TV input tile, it’s added at the top of your Home screen. Whenever you add a new streaming channel from the Roku Channel Store, it’s added at the bottom of your Home screen.

You can easily rearrange the order of the tiles on the Home screen to suit your viewing preferences. For example, you might want Antenna TV to be the first tile in your Home screen. But if you mostly watch one streaming channel, you might want its tile to be the first one on your Home screen.

Rearranging tiles is easy:

1 From the Home screen, highlight one of the tiles you want to move. 2 Press to display a list of options for the type of tile you selected. 3 Select Move input. The list of options disappears and the highlighted tile shows arrows indicating how it can be

moved.

Note

4 Use the arrow buttons to move the highlighted tile to its new position. As you move the tile, it pushes other tiles out

of its way.

5 Press OK to lock the tile into its new position. 6 Repeat these steps to move other tiles until you have arranged your Home screen to your liking.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Edit broadcast TV channel lineup

When you set up the TV tuner as described in Setting up Antenna TV on page 43, your TV adds all the channels with good signals that it could detect in your area. It’s likely that you now have more channels than you want in your channel list.

To edit the channel lineup, from the Home screen, navigate to Settings>TV inputs >Antenna TV>Edit channel lineup. You’ll see a screen listing all of your channels. Adjacent to the list of channels is a miniature TV screen playing the highlighted channel's picture and sound.

Highlight each channel you want to hide, and then press OK to hide the channel.

Tip

If you need to see or hear the highlighted channel, wait a couple of seconds for your TV to start playing the channel’s picture and sound. Also note that if you've enabled parental controls and the program on the current channel is blocked, you won’t see a picture or hear sound while editing the channel lineup.

Rename inputs

Rather than trying to remember that your Blu-ray player is connected to HDMI 1 and your game console is connected to HDMI 3, you can rename the TV inputs to match the connected component.

Tip

Renaming an input also changes the icon associated with it.

To rename an input, you can either:

• Highlight the input tile in the Home screen, and then press to display a list of options. From the list of options, select Rename input. Then select a new name and icon.

•From the Home screen, navigate to Settings>TV inputs. On the TV inputs screen, select the input you want to rename, select Rename, and then choose a new name and icon from the provided list.

Press to return to the Home screen. The new name and icon are now in effect.

Remove unwanted tiles

It’s easy to remove unused TV inputs and unwanted channel or app tiles. For example, if you never use the HDMI 3 input, or if you don’t like the weather app you added from the Roku Channel Store, you can remove them from your

Home screen.

Tip

You also ca n remove the Antenna TV tile if you never use the TV tuner. But be aware that removing the Antenna TV tile also deletes the broadcast TV channel list. You’ll have to set up the TV tuner again next time you want to view broadcast TV. Instructions for setting up the TV tuner can be found in Setting up Antenna TV on page 43.

• To remove any tile, highlight the input tile in the Home screen, and then press to display a list of options. From the list of options, select Remove input. In the screen that follows, confirm you want to remove the input.

• Alternatively, to remove a TV input tile from the Home screen, navigate to Settings > TV inputs. On the TV inputs screen, select the input you want to remove, and then select Remove > Confirm. Then press to return to the Home screen.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Change themes

Another way to customize your TV is to change its theme. The theme establishes the look and feel of your TV through colors, designs, and fonts.

Tip

Themes are available only when your TV is connected to the Internet. Some themes require payment.

To change the theme, in the Home screen menu navigate to Settings>Themes. In the Themes screen, choose from the following options:

• My themes—Highlight a theme, and then press OK to switch to that theme.

• Custom settings—Tur n Featured themes on or off. When Featured themes is on, your TV automatically switches to featured themes—like certain holiday-inspired themes—for a limited time whenever Roku makes them available, and then switches back to your selected theme when the featured theme expires. When off, your TV always uses your selected theme.

Change the screensaver

Displaying a still image (such as a logo) for an extended period of time can cause a permanent after-image to be burned into the screen. To avoid after-image burn-in, your TV turns on a screen saver after it is idle for a few minutes. To change the screensaver, in the Home screen menu navigate to Settings>Screensaver, and then select a screensaver.

Tip

The Power Saver screensaver reduces the amount of power your TV uses by turning off the backlight. For example, if the Picture mode is set to Vivid or Normal, Power

Saver reduces power consumption up to 70%.

Change sound effects volume

Sound effects are the noises your TV makes to let you know it received your command. You can change the volume of sound effects or turn them off.

To adjust the sound effects volume, in the Home screen menu, navigate to Audio>Menu volume. Navigate to the right and then change the setting to High, Medium, Low, or Off.

Configure power settings

Power settings let you set up your TV so that it turns on to the location you choose. Power settings also help your TV save energy by automatically turning it off under certain conditions.

Power on settings

Power on settings tell your TV what to do when you turn on the power. To configure the power on settings, from the Home screen menu, navigate to Settings > System > Power > Power on. Highlight the power on location from the list, and then press OK to select it.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Auto power off settings

To help you save energy, your TV can automatically turn itself off after a period of inactivity or a period during which no signal has been detected. It is factory-configured to do both of these things, but you can change these settings if needed.

To configure automatic power off, from the Home screen menu navigate to Settings > System > Power >Auto power off. In the Power settings screen, highlight the following options and press OK to turn them on or off:

• Reduce power after 15 minutes - If no video or audio activity and no user interaction occur for 15 minutes, the TV automatically turns off the screen and sound.

• Turn off after 4 hours - If no video or audio activity and no user interaction occur for 4 hours, the TV goes into standby mode.

Turning the status LED off

Normally, the status LED on the front of your TV is lit whenever your TV is in standby mode. If you prefer the status LED to not be lit in standby mode, you can turn it off with this setting. To do so, from the Home screen, navigate to Settings > System > Power > Standby LED, and then select Off.

After making this change, the status LED still performs the other indication functions listed in the User Guide.

Configure accessibility

Accessibility settings enable users with vision or hearing impairment to use the TV more effectively. Accessibility settings are located under Settings > Accessibility.

Captions mode

Captions mode specifies when closed captions appear. Access caption settings from the Home screen by selecting Settings > Accessibility > Captions mode. At this point, you can choose among the following options:

• Off - No captions appear.

• On - Captions appear whenever they are available from the program source.

• Instant replay - Captions appear only when you use the replay option, and only when you are watching a streaming program that supports instant replay.

• When mute - Captions appear only when the TV is muted.

Tips

• You can change the captions mode while watching a program. To do so, press to display the Options menu, and then select Closed Captioning.

• Some streaming channels require you to enable captions through a setting within their channel even though you have turned on captions everywhere else.

Note

Once enabled, the captions mode applies to all inputs that support captions and remains enabled until you turn it off.

Captions style

Captions style lets you control how closed captions look when displayed on your TV. Access caption style settings from the Home screen by selecting Settings > Accessibility > Captions style. At this point, you can choose among the following options:

• Text sty le - Choose from a list of fonts. As you move the highlight to each font, you can see a sample of the result in an adjacent panel.

• Text edg e ef fe ct - Choose from a list of edge effect styles, such as raised, depressed, and various shadows. As you move the highlight to each effect, you can see a sample of the result in an adjacent panel.

• Text size - Choose from a list of sizes. As you move the highlight to each size, you can see a sample of the result in an adjacent panel.

• Text co lor - Choose from a list of colors for the text. As you move the highlight to each color, you can see a sample of the result in an adjacent panel.

• Text opacit y - Choose from a list of opacity settings for the text. This setting determines how much the area behind the text shows through the text. A value of 100% blocks all of the content behind the text. As you move the highlight to each setting, you can see a sample of the result in an adjacent panel.

• Background color - Choose from a list of colors for the background area behind the text. As you move the highlight to each color, you can see a sample of the result in an adjacent panel. Note that you won't see any change unless you set the Background opacity to a value other than Off.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

• Background opacity - Choose from a list of opacity settings for the background of the caption. This setting determines how much the area behind the caption background shows through the background. A value of 100% blocks all of the content behind the background. As you move the highlight to each setting, you can see a sample of the result in an adjacent panel.

• Window color - Choose from a list of colors for the window rectangle surrounding the entire caption. As you move the highlight to each color, you can see a sample of the result in an adjacent panel. Note that you won't see any change unless you set the Window opacity to a value other than Default or Off.

• Window opacity - Choose from a list of opacity settings for the window rectangle surrounding the entire caption. This setting determines how much the area behind the caption window shows through the window. A value of 100% blocks all of the content behind the window. As you move the highlight to each setting, you can see a sample of the result in an adjacent panel.

Audio Guide settings (U.S. models only)

On TVs sold in the United States, the Audio Guide settings help users who are blind or visually impaired to configure the text-to-speech reader, enabling them to operate their TV more easily. The Audio Guide uses voice prompts that speak volume and channel changes, menu options, and setting changes. Access Audio Guide settings from the Home screen by navigating to Settings > Accessibility, and then select from the following options in the Audio Guide section:

• Audio Guide - Turn the Audio Guide on or off.

• Speech rate - Select one of four speeds at which to hear spoken guide information: Slow, Normal, Fast, or Very Fast.

• Vol ume - Select the volume at which to hear spoken guide information, relative to the main TV volume.

• Shortcut - Enable or disable the shortcut feature. When enabled (the default), pressing the Option button four times in quick succession enables or disables the Audio Guide.

Configure parental controls

Parental controls enable you to control whether the members of your household can view certain kinds of broadcast TV programs. When a program or feature is blocked, you can unblock it by entering a parental control PIN that only you know.

Note

The parental control feature can be used to hide the Movie Store, TV Store, and News options that are available on the Home screen menu of TVs manufactured for

the United States. However, the parental controls feature does not block other streaming content nor content from inputs other than the TV tuner.

Creating a parental control PIN

The first time you access the Parental controls screen, you must create a new parental control PIN. Thereafter, whenever you want to change parental control settings, unblock programming that has been blocked, change the PIN, or disable parental controls, you must enter your parental control PIN.

Tip

Your parental control parental control PIN has nothing to do with your Roku PIN. You can make them the same if you want—this is entirely your choice.

To create a new parental control PIN, from the Home screen menu navigate to Settings > Parental controls. The screen displays a numeric keypad. Use the arrow buttons and the OK button to enter a four digit code. Then repeat the process to enter the same PIN again, just to make sure you correctly entered the PIN you want to use.

Important

If you forget your PIN, the only way to recover is to perform a factory reset operation, as explained in Factory reset everything on page 70. Be sure to write it down in a safe place just in case.

Blocking Movie Store, TV Store, and News (U.S. TV models only)

One of the parental control options is to completely hide the entertainment options that are available directly on the Home screen menu of TVs manufactured for sale in the United States. (The Movie Store, TV Store, and News options are not available on TVs manufactured for sale in Canada).

To hide Home screen entertainment options:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, highlight Home screen and then select or clear either of these options:

• Hide “Movie Store and TV Store”—Removes the Movie Store and TV Store options from the Home screen menu.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

• Hide “News”—Removes the News option from the Home screen menu.

Tip

To use either of these options after you've hidden them, you must return to this screen and remove the check mark from the corresponding Hide command.

Blocking Broadcast TV shows

For broadcast TV, parental controls use information embedded in the broadcast signal to determine whether to allow a program to be displayed. Parents can configure parental controls to block broadcast TV programs that meet or exceed a specific rating, so they cannot be viewed or heard unless the correct parental control PIN is entered.

Note

Rating standards differ by country.

Enabling parental control of TV shows

The first step in blocking TV shows is to enable parental control of TV shows. This setting is provided separately to make it easier for you to turn parental control of TV shows on and off without

disturbing their settings. For example, your kids are going to summer camp for two weeks, and while they are gone, you don’t want to have to deal with unblocking shows that you want to watch by entering your parental control PIN. All you need to do is clear Enable parental controls, and all TV shows are unblocked. When the kids return, select Enable

parental controls again, and all of your parental control settings are restored in a single operation.

To enable parental control of TV shows:

1 In the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, navigate to TV tuner> Parental control of TV shows. 3 Make sure the check box next to Enable parental controls is checked. If not, highlight it and press OK.

Blocking based on US TV ratings

Most broadcast US TV shows—other than movies—contain rating data that enables parental controls to block shows that parents don’t want others to view. The ratings are divided into two groups that function independently:

• Youth gr oup —TV-Y, TV-Y7

• Main group—TV-G, TV-PG, TV-14, TV-MA

Within each of these groups, the ratings interact such that if you block a particular level of content, your TV also blocks all content with a higher rating. Conversely, if you unblock a particular level of content, your TV also unblocks all content with a lower rating. For example, if you block TV-PG programs, your TV also blocks TV-14 and TV-MA programs. If you subsequently unblock TV-14 programs, TV-PG programs are also unblocked, but TV-MA programs remain blocked.

Similarly, within the main group, content types can be individually blocked. For example, you can block just coarse language in shows with a TV-PG rating. If you do, then your TV also blocks shows with coarse language in the higher ratings (TV-14 and TV-MA). Subsequently unblocking coarse language in TV-14 ratings does not unblock coarse language in TV-MA programs, but it does unblock coarse language in TV-PG programs.

To block TV shows based on US television ratings:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, navigate to TV tuner> TV ratings. Choose among the following settings:

• Entire ratings—Highlight the rating you want to block, and then navigate to the right and select the first option that blocks the entire rating level (and all higher rating levels).

• Individual content types—Highlight the rating that contains the content type you want to block, and then select the content types you want to block from among those listed. Remember that blocking a content type in one rating blocks the equivalent content type in all higher rating levels.

Blocking based on US movie ratings

Most movies in the US are rated by the Motion Picture Association of America, or MPAA, so the ratings are known as MPAA ratings. TV broadcast signals carry movie rating data that enables parental controls to block shows that parents don't want others to see. The ratings are:

• G—General audiences

• PG—Parental guidance suggested

• PG-13—Parents strongly cautioned for children age 13 or younger

• R—Restricted

• NC-17—Not for age 17 or younger

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Unlike US TV ratings, there are no individual content types within the ratings. But like TV ratings, blocking movies with a particular rating also blocks movies with a higher rating, and unblocking movies with a particular rating also unblocks movies with a lower rating.

Tip

Blocking movies with an NC-17 rating also blocks programs with the now-obsolete X rating, which can still occur in the program data of older movies.

To block movies based on MPAA ratings:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, navigate to TV Tuner>Movie ratings. 3 Select the rating level you want to block. You need only select one rating level, and all higher levels are

automatically blocked.

Blocking based on Other ratings

Your TV can block programs having ratings that had not been defined when your TV was manufactured. It does this by detecting a new Rating Region Table in a program and then downloading the new table and displaying its rating in the Parental controls.

When your TV downloads a new Rating Region Table, it adds a new option to the list of rating types: Other ratings. If you see this option in the Parental controls screen, you have tuned to a station that has implemented a new rating table. Once the new rating table has been downloaded to your TV, it remains in your TV until it is factory reset, and you can configure blocking based on the new ratings.

New Region Rating Tables can have independent rating levels, or rating levels that interact in the same ways as the built-in US TV and MPAA Movie ratings.

Tip

If your TV downloads a new Region Rating Table, you’ll have to experiment with its settings to understand how to use it.

Blocking based on Canadian English ratings

Canadian-English language and third-language programs that are broadcast in Canada are rated by the Action Group on Violence on Television, or AGVOT. TV broadcast signals carry rating data that enables parental controls to block shows that parents don't want others to view based on content containing violence, language, sex, or nudity. The ratings are:

• C—Children under 8 years

• C8—Children 8 years and older

• G—Generally suitable for all age groups

• G—Parental guidance suggested for viewers under 14 years

• 14+—Generally not suitable for viewers under 14 years

• 18+—Generally not suitable for viewers under 18 years

Blocking content with a particular rating also blocks content with a higher rating, and unblocking content with a particular rating also unblocks movies with a lower rating.

To block programs based on AGVOT ratings:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, navigate to TV tuner>Canadian English ratings. 3 Select the rating level you want to block. You need only select one rating level, and all higher levels are

automatically blocked.

Blocking based on Canadian French ratings

Canadian-French language programs that are broadcast in Canada are rated by the Régie du cinéma du Québec. TV broadcast signals carry rating data that enables parental controls to block shows that parents don't want others to view based on content containing violence, language, sex, or nudity. The ratings are:

• G - Generally suitable for all age groups

• 8+—Viewers 8 years and older

• 13+—Viewers 13 years and older

• 16+—Viewers 16 years and older

• 18+—Adults only

Blocking content with a particular rating also blocks content with a higher rating, and unblocking content with a particular rating also unblocks movies with a lower rating.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

To block programs based on Canadian-French ratings:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, navigate to TV tuner>Canadian French ratings. 3 Select the rating level you want to block. You need only select one rating level, and all higher levels are

automatically blocked.

Blocking unrated programs

Some broadcast TV shows and movies are assigned a rating of “Unrated”. Whether or not such programs contain content that is objectionable to you cannot be determined. However, you can choose to block such programs.

To block all unrated broadcasts:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, navigate to TV tuner>Block all unrated programs. 3 Highlight Block and press OK. When blocking is enabled, the adjacent padlock icon changed from unlocked to

locked.

Tip

Blocking programs that have been assigned a rating of “Unrated” does not block programs that have no rating assigned to them (for example a broadcast of a local town council meeting). Programs that do not have an assigned rating display Rating NA (for “not applicable,” meaning a rating is not needed). Programs that have no assigned rating are considered “safe”; therefore, there is no need to block them.

What happens when a TV show is blocked?

After you've set up parental controls, TV shows and movies can be blocked:

• When you change channels and the new channel is playing a program whose rating exceeds your settings.

• When a new show comes on the channel you are watching and its rating exceeds your settings. When a program is blocked by parental control settings, your TV displays a blocked message:

Whenever this blocked message appears, both the video and audio of the show are blocked, as well as program data that would normally appear in the area at the bottom of the screen.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

To watch the blocked program, you need to know the PIN code defined when you enabled parental controls, as explained in Creating a parental control PIN on page 62.

1 Press OK to select Unblock and display a PIN pad.

2 Use the arrow buttons to enter your parental control PIN code, and then press OK to select Unblock everything.

After unblocking shows that have been blocked, all blocking is disabled for two hours or until you turn off your TV.

Changing the parental control PIN

To change your parental control PIN:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, highlight Change PIN. 3 Move the highlight into the adjacent keypad, and then use the arrow buttons and the OK button to enter a four digit

code. Then repeat the process to enter the same PIN again, just to make sure you correctly entered the PIN you want to use.

Resetting parental controls

So now your kids have grown up and gone away to college, and you no longer want to deal with blocked programs.

To erase all parental control settings:

1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN. 2 In the Parental controls screen, highlight Reset parental controls. 3 Follow the instructions on the screen to confirm that you want to erase all parental control settings.

Tip

Resetting parental controls also erases your parental control PIN.

More settings

This section describes the features and settings of your TV that were not covered in the other parts of this guide.

Changing network settings

If needed, you can change your network settings at any time. For example, if you change the name of your wireless network (its SSID) or its password, you will need to change your TV’s settings so that it can continue to connect. Also, if you decided not to connect to the Internet in Guided Setup on page 33, you can use Network settings to connect at a later time.

To change network settings, from the Home screen menu, navigate to Settings > Network, and then press the RIGHT arrow. At this point, you can choose the following options:

• Update connection—Press OK to start the update process. Your TV uses your current wireless network name and password to reconfirm the wireless connection, the local network connection, and the Internet connection.

• Set up new Wi-Fi connection—Press OK to start a scan for wireless networks. Follow the on-screen instructions to complete the network connection. For help with setting up a new connection, see “Setting up your TV“on page 34. In addition to your own wireless signal, your TV might pick up signals from your neighbors. Now you can do one of the following:

• Select your network name—Select the name of your network and then enter your wireless password if requested.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

• Scan again—If you don’t see your wireless network name in the list, select Scan again to list all networks in range. The first scan listed only the first few, strongest wireless signals. The second scan sometimes results in a longer list. If you still don’t see your network name, you might need to adjust the location of the wireless router or your TV, turn on your router, or make other changes. When everything is ready, select Scan again to repeat the network scan.

Note

Highlighting Scan Again displays an informational panel with the unique media access control (MAC) address of your TV. You will need the MAC address if your wireless router is configured to use MAC address filtering.

Note

Wireless networks that are password-protected display a “padlock” icon adjacent to the name.

Changing time settings

You can change time settings to suit your preferences. You can find the following settings by navigating from the Home screen menu to Settings > System > Time:

• Sleep timer—Set a time delay after which your TV will automatically shut off. This setting reflects the setting you can make in the Options menu from any TV input, as explained in Options menu settings on page 50. Note that the sleep timer setting is not input specific.

• Time zone—Select whether to set the time zone automatically or manually, and if set manually, select your current time zone. Typically, a TV connected to the Internet can discover its own time zone automatically, and a TV that is not connected to the Internet must be set manually. Initially, this setting is made when you set up the TV tuner, as explained in Setting up Antenna TV on page 43. Correct time zone information is needed to correctly display program data.

• Clock format—Select whether to display time in a 12-hour or 24-hour format, or to turn off time display. This setting is available only on TVs that are connected to the Internet. Non-connected TVs do not display the time.

Scanning for broadcast TV channels again

There will be times when you need to create a new channel list. For example, you:

• Change cable providers

• Reorient your TV antenna

• Move to a different city with different channels

Whenever you need to update your TV channel list, you can repeat the channel scan.

Tip

To repeat the channel scan, from the Home screen menu, navigate to Settings > TV inputs > Antenna TV > Scan again for channels. Then select Start finding channels to begin the channel scan process. The screens and options that appear during this process are identical to those described in How do I set up the TV tuner? on page 43.

Using your TV in a home theater

Your TV has several features that make it an ideal TV for a home theater. But you might not notice them because they remain in the background until you decide to use them.

Turning off the speakers

When you use your TV with a sound bar or an external amplifier and speakers, you’ll probably want to turn off the internal TV speakers.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

To turn off your TV’s built-in speakers, in the Home screen menu, navigate to Settings > Audio > TV speakers and change the setting.

Tip

Your TV’s internal speakers can be enabled and disabled automatically as needed by system audio control, as described in Enabling system audio control on page 69. The internal speakers are also turned off when you use the headphone jack.

Changing the audio mode

Your TV has two audio modes, accessed by navigating in the Home screen menu to Settings>Audio>Audio mode:

• Stereo—Use this setting for internal speakers, headphones, and external stereo amplifiers connected through the HDMI1 (ARC), SPDIF, or headphone jack.

• Auto—Use this setting to automatically detect the best audio setting based on the audio stream in the content you are watching. If you have connected your TV to an external Dolby Digital or Dolby Digital Plus compatible amplifier, receiver, or sound bar through HDMI1 (ARC) or SPDIF, your TV automatically selects the appropriate surround sound capabilities of the device based on the characteristics of the current program.

Setting up a digital audio connection

You can connect your TV to an external amplifier, receiver, or sound bar by using either of these two connections:

• HDMI ARC—The HDMI® Audio Return Channel enables your TV to output digital audio on one of its HDMI® connectors. The connected amplifier can also function simultaneously as an input source to your TV, if needed. To use the ARC capability, you must connect an HDMI® cable from your amplifier's HDMI® ARC connector to the HDMI1 (ARC) connector on your TV. You also must:

• Be sure your HDMI® cable is certified by HDMI®.

• Enable HDMI® ARC under Settings > System >Control other devices (CEC), as explained in Enabling HDMI® ARC on page 69.

• SPDIF—Your TV has an SPDIF connector that outputs a digital audio signal. To use the optical output, connect a digital optical audio cable from the amplifier to the SPDIF connector on your TV.

Note

Dolby Audio™ supporting Dolby Digital Plus format is not available through the SPDIF output. This format is only available through the HDMI1 (ARC) connection.

After making the required HDMI® ARC or digital optical audio connection, go to Settings > Audio > SPDIF and ARC option and select the audio format to use.

Note

In most cases, Auto detect is the best option. Other settings can result in no sound when the content you are viewing does not contain the audio stream type you selected.

Controlling other devices through CEC

Consumer Electronics Control (CEC) enables your TV and other CEC-compatible home entertainment components to control one other in various ways. First, the CEC-compatible devices must “discover” one another and report their capabilities. After this, one device can control another according to the features you enable. For example, playing a disc on a Blu-ray player could switch your TV to the Blu-ray player's input. Or, powering off your TV could also power off the Blu-ray player and the home theater receiver.

Discovering connected CEC devices

To discover CEC devices:

1 Make sure that your CEC-compatible components are connected to your TV with a suitable high-speed HDMI® cable

that supports HDMI® ARC and CEC control.

2 Turn on each component and make sure all components have CEC enabled.

Tip

Some manufacturers have their own branded names for CEC functionality, so you might need to read the product documentation to correctly identify the CEC features of the device.

3 On your TV’s Home screen menu, navigate to Settings > System > Control other devices (CEC) and then select

Search for CEC devices. Press OK to repeat the discovery process, if necessary.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

When finished, your TV displays a list of CEC devices that are connected to each HDMI® input, as well as any devices that had previously been connected. Your TV remembers the names of multiple CEC devices even when they are no longer connected. If the list is longer than the allowed space, press to see a complete list in a scrollable window.

Enabling HDMI® ARC

HDMI1 (ARC) is the audio return channel that is available on one of your TV’s HDMI® ports. The audio return channel

enables you to send a Dolby Digital audio signal back to a home theater receiver that is also sending an audio and video signal into your TV. Using HDMI® ARC reduces the number of cables needed and optionally lets you control the volume and mute state of the receiver by enabling system audio control.

HDMI® ARC is disabled by default. To enable HDMI® ARC, in the Home screen menu, navigate to Settings > System >

Control other devices (CEC), and then highlight HDMI ARC. Press OK to enable or disable the feature.

Note

Enabling HDMI ARC also enables System audio control. After enabling HDMI ARC, you can disable System audio control if you prefer.

Enabling system audio control

System audio control enables your TV remote control to change the volume and mute state of an amplifier or sound bar connected through HDMI®, and to display the external device's volume and mute status in your TV’s on-screen display.

Your TV automatically turns off its internal speakers and sends volume and mute control signals to an external amplifier when all of the following are true:

• System audio control is enabled on your TV.

• Your TV is connected to a CEC-compatible amplifier, it is powered on, and CEC discoverability is enabled.

• The CEC-compatible amplifier's HDMI® ARC connector is connected to your TV’s HDMI1 (ARC) connector with a suitable HDMI® cable.

When the CEC-compatible amplifier is off, your TV automatically turns on its speakers (unless you have turned them off as described in Turning off the speakers on page 67) and resumes local control of volume and mute state.

To enable or disable system audio control, in the Home screen menu, navigate to Settings > System > Control other

devices (CEC) and highlight System audio control. Press OK to enable or disable the feature.

Enabling 1-touch play

1-touch play enables a component to control which TV input is active. For example, pressing Play on your Blu-ray player switches your TV to the Blu-ray input.

1-touch play is disabled by default. To enable 1-touch play, in the Home screen menu, navigate to Settings > System >

Control other devices (CEC) and highlight 1-touch play. Press OK to enable or disable the feature.

Enabling system standby

The system standby feature causes other components to power off when you power off your TV. Depending on the CEC System Standby implementation, it also might enable connected components to power off your TV when you power off the component.

System standby is disabled by default. To enable system standby, in the Home screen menu, navigate to Settings >

System > Control other devices (CEC) and highlight System standby. Press OK to enable or disable the feature.

Restarting your TV

You can restart your TV when necessary. Restarting has the same effect as unplugging your TV power and then plugging it in again.

To restart your TV, navigate to Settings > System > Power and then select System restart. Highlight Restart, and then press OK to confirm restart.

While your TV restarts, the screen goes dark for a few seconds, and then displays the startup screen for a few more seconds. When the restart operation completes, the TV displays the activity you selected in Power on settings on page 60.

Resetting your TV

You can choose to reset only your TV picture and audio settings to their original values, or perform a full factory reset to return your TV to the state it was in when you first unpacked and turned it on.

Reset audio/video settings

To reset only your TV picture and audio settings to their original values, navigate to Settings > System > Advanced system settings> Factory reset, and then highlight Reset TV audio/video settings. Read the information on the

screen to make sure you understand what the reset operation does. To proceed with the reset operation, press PLAY/PAUSE three times in a row.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Factory reset everything

A full factory reset returns the TV's settings to their original state and removes all personally identifiable information from the TV. When finished, you must repeat Guided Setup, reconnecting to the Internet, re-linking your Roku account, and reloading any streaming channels. You also must repeat Antenna TV setup and input configuration.

Factory reset is the recommended choice if you want to transfer your TV to another owner, and is the only choice if you want to switch from store mode to home mode (if you inadvertently selected store mode during Guided Setup).

To perform a factory reset, navigate to Settings > System > Advanced system settings> Factory reset, and then highlight Factory reset everything. Read the information on the screen to make sure you understand what this reset operation does.

To proceed with the full factory reset, use the on-screen number pad to enter the code displayed on the screen, and then select OK to proceed.

When the factory reset operation completes, your TV restarts and displays the first Guided Setup screen.

What if I can’t access the Factory Reset option?

It is possible that your TV might get into a state where you cannot access the various menus, including the menu option that lets you perform a factory reset operation. If that happens, you can force your TV to reset by following these steps:

1 Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on your TV connector

panel.

2 Continue to hold the RESET button for approximately 12 seconds.

When the reset cycle completes, the status indicator comes on dim.

3 Release the RESET button. The TV is now powered off. 4 Proceed through Guided Setup. See Setting up your TV on page 34.

Network connection reset

1 If you want to remove your network connection information without disturbing other settings, navigate from the

Home screen to Settings > System > Advanced systems settings, and then select Network connection reset.

2 When you select this option, the TV removes your wireless network information, including the name of the

connection (its SSID) and your wireless password, if any, and then it restarts. After restarting, your TV retains all of its other settings and its association with your Roku account.

3 After resetting your network connection, navigate from the Home screen to Settings > Network > Set up new

connection to continue enjoying all of the benefits of your connected TV.

Changing your Roku Channel Store PIN preference

When you created your Roku account, you were given the opportunity to create a PIN code and to specify when it must be used. If you created a Channel Store PIN and want to change it, or you don’t remember your PIN, or if you didn’t create a Channel Store +PIN and want to add one, you can easily make these changes.

1 On a computer, tablet, or smartphone, use your web browser to go to https://my.roku.com. 2 Enter your email address and password to sign in. After signing in, the My Account page appears. 3 Under PIN Preference, click Update to open the Choose Your PIN Preferences page. 4 Skip this step if you just want to change your PIN. Otherwise, choose the option your prefer from among those

listed:

• Require a PIN to make purchases or to add any item from the Channel Store.

• Require a PIN to make purchases.

• Do not require a PIN to make purchases.

5 If you choose either of the first two options, enter your PIN twice in the appropriate boxes. 6 Click Save Changes to save your changes and return to the My Account page. Note that your current setting is

described under PIN Preference.

Getting system updates

If your TV is connected to the Internet and linked with a Roku account, it will automatically get updates from time to time. You don’t need to do anything. But if you are aware that an update is available and you don’t want to wait until your TV updates itself, you can manually check for updates.

If your TV is not connected to the Internet, you can still get updates by using a USB flash drive. You can download an updated User Guide that matches your Roku TV software version from the Insignia web site at:

www.insigniaproducts.com/support.html

To determine your current Roku TV software version, go to Settings > System > About, and then look at the Software

version line.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

USB flash drive

Any normal USB flash drive will work, provided it has a FAT-16 or FAT-32 file system format. (This is the default for most flash drives.)

The size of the download is small-usually less than 100 MB-and so will fit on any size flash drive you might have.

12- and 6-digit codes

The USB update process uses a pair of codes to validate that you are authorized to install an update, and to ensure you are not attempting to install an old, unsupported version of the system software.

Checking for updates on a connected TV

If you’re one of those people who has to have the latest, most up-to-date features the moment they are available, you can check for updates as often as you want.

To check for updates, navigate to Settings > System > System update, and then select Check now. Your TV responds either with a message saying that your TV is up to date, or with a message saying that an update is available.

Follow the instructions on the screen to install the system update.

Note

Sometimes system updates install new system software, and other times they install new features for streaming channels. Therefore, you won’t always see a change in the behavior of your TV after a system update.

Getting updates on a non-connected TV

If your TV is not connected to the Internet, you can still get system updates by using a USB flash drive and a computer with an Internet connection.

To get a system update, navigate to Settings > System > System update:

The System update screen on a non-connected TV gives you the opportunity to connect your TV to the Internet to automatically receive updates. We recommend this option if it is possible in your situation. To proceed, select Connect to the Internet and follow the instructions in But what if I didn’t connect my TV? on page 42.

Otherwise, if you can’t connect to the Internet, select I can’t connect, and then follow the instructions on the screen. Here’s a summary:

1 On an Internet-connected computer, go to the web site displayed on the

System update screen.

2 On the USB Update web page, select the correct brand and model and then

click Download. Save the file to the root folder of a standard USB flash drive.

3 When the download finishes, take the USB flash drive to your TV and plug it

into the USB port. When you do, your TV validates the files on the flash drive and displays a 12-digit code.

4 Write down the code and the web address, and take this information back

to your Internet-connected computer.

5 On the 12-digit code page, enter the code your TV displayed, and then click

Next.

6 On the 6-digit code page, write down the 6-digit code that appears, and

then take it back to your TV.

7 Using your TV remote control, select Next to move to the next screen, and

then use the on-screen keyboard to enter the 6-digit code. When finished, select OK. The system update begins. Do not remove the USB flash drive until your TV restarts.

When the update finishes, your TV restarts. You can check the new version number by navigating to Settings > System > About.

www.insigniaproducts.com

40"/48" 1080p, 60Hz, LED Insignia Roku TV

Other devices

Getting and using the Roku mobile app

Roku makes the Roku mobile app free for compatible iOS, Android, and Microsoft Windows 8/8.1 devices. With the Roku mobile app, you can control your TV, find and add new Roku Channels, more easily search and find

something to watch, and even use your voice to search without typing. More information can be found by going to

http://support.roku.com/home and searching for “mobile app.”

Private Listening on the Roku mobile app

Another feature of the Roku mobile app is the ability to listen to streaming programs on headphones connected to your device (on compatible Apple and Android devices only). To use this feature, you must be watching or listening to streaming content (not live TV or other TV inputs), and you must have the latest version of the Roku mobile app.

For more information, see: https://support.roku.com/article/217478308-private-listening-on-the-roku-mobile-app-

Using a universal remote

In many cases, you can program your cable or satellite universal remote control to also control your TV. You will need to have instructions for programming the remote control handy. Check with your cable or satellite provider for instructions.

For details on how to set up your TV to work with universal remote controls, visit www.roku.com/universalremote.

Maintaining

• Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.

• Storage temperatures are 5° to 113°F (-15° to 45°C).

• Working temperatures are 41° to 95°F (5° to 35°C).

• Do not place your TV in direct sunlight or near a heat source.

Cleaning your TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet.

Cleaning your TV screen

Clean the screen with a soft, lint-free cloth.

www.insigniaproducts.com

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Troubleshooting

Warning

Do not try to repair your TV yourself. Contact authorized service personnel.

Note

If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.

Note

If you have any other questions about how to use your TV that are not covered in this User Guide, go to http://support.roku.com and select your TV brand and model.

FAQ

For the latest answers to Frequently Asked Questions, visit General Support & FAQs under the Support and Service section of the Insignia TV support website (www.insigniaproducts.com) and the Support section of the Roku website (www.roku.com).

Video and audio

Symptom Possible cause Try this...

Picture does not fill the screen or there are black bars around the picture

I don’t see a picture when I select an input

TV channel does not appear

The picture size may need to be adjusted

TV is not on

Cables are not connected correctly

Picture settings may be incorrect

Incorrect input may be selected

Input source not detected

TV input may be bad

Broadcast TV may be experiencing problems or may not be set up

• Adjust the picture size (aspect ratio). See the Picture Size option in “Options menu settings” on page 50.

• Make sure that your TV is plugged into a working power outlet, and that your TV is turned on. (Your TV had a light on the front that indicates if your TV is turned off. See Status light on page 46.)

• Make sure that the video cables are connected correctly and securely to your TV.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 17 or Connecting an antenna or cable TV (no box) on page 20.

• Adjust the contrast and brightness. See the TV brightness option in Settings menu on page 50 or Options menu on page 50.

• Adjust the TV picture. See Advanced picture settings on page 51.

• Make sure that the correct input is selected for the device you want to view. See Switching TV inputs on page 49.

• Make sure that the device connected to the input is turned on.

• Make sure that the cord to and from the device is connected firmly and correctly to the device and your TV.

• Connect a different device to the same input and check to see if it works correctly.

• Try another channel. The station may be experiencing problems.

• Make sure that the incoming signal is compatible.

• If you are trying to watch broadcast TV, make sure that Antenna TV is set up. See Setting up Antenna TV on page 43.

www.insigniaproducts.com

Symptom Possible cause Try this...

Dark, poor, or no picture (screen is lit), but sound is good

No color, dark picture, or color is not correct

Only snow (noise) appears on the screen

Pictu re quality is good on some channels and poor on others. Sound is good

Broadcast TV may be experiencing problems or may not be set up

Cables may not be connected correctly

Picture settings may be incorrect

Broadcast TV may be experiencing problems

Cables are not be connected correctly

Broadcast TV may be experiencing problems or may not be set up

Cables may not be connected correctly

Broadcast signal may be weak

• Try another channel. The station may be experiencing problems.

• If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

• Make sure that the antenna or cable TV is connected correctly and securely. See Connecting a cable or satellite box on page 17 or Connecting an antenna or cable TV (no box) on page 20.

• Make sure that the video cables are connected correctly and securely to your TV.

• The video cable(s) you are using may be bad. Try a new set.

• Adjust the brightness. See the TV brightness option in

Settings menu on page 50 or Options menu on page 50.

• Change to a different picture mode. See the Picture mode option in Options menu settings on page 50 or Advanced

picture settings menu options on page 52.

• Adjust the contrast, color, and brightness settings. See the TV brightness option in Settings menu on page 50 or Options

menu on page 50.