INGENICO M7002WIBT installation instructions

Download

MODU/7002

Xtra module Technical Guide

Contents

1_ Introduction ............................................................................................ 3

2_ Xtra module general inf orm a ti on ........................................................... 4

2_1 Physical dimensions ....................................................................................... 4

2_2 Xtra module Features ..................................................................................... 5

3_ Xtra module Technical information ....................................................... 6

3_1_1 Hardware architecture: ................................................................................................... 7

3_1_2 Wireless Connectivity ..................................................................................................... 8

3_1_3 Internal Frequencies ..................................................................................................... 10

4_ Norms&Marking .................................................................................... 11

4_1 1 Federal Communications Commission (FCC) Statement & Industry Canada (IC)

Statement ............................................................................................................ 11

1_Introduction

This technical guide is a document that describes the features of the terminal.

2_Xtra module general information

45 mm

55 mm

15 g

21 mm

2_1 Physical dimensions

Mechanical

characteristics

External dimensions Weight Casing material

55 (L) x 45 (W) x 21 (H) mm 15g (full options) ABS-PC + TPU

2_2 Xtra module Features

• Wireless connectivity

o Wifi o Bluetooth

3_Xtra module Technical information

Name Xtra module

Environment

Operating temperature

Storage temperature -20°C to +55°C (-4°F to 131°F) 

Operating humidity 85% non-condensing at +4 0°C (10 4°F) 

0°C to +40°C (32°F to 104°F) 

3_1_1 Hardware architecture:

Feature

Dualband :2.4 GHz and 5 GHz Wi-Fi

Chipset

Marvell 88W8782

Standard compliance

802.11 a/b/g/n, SISO, 2.4Ghz and 5Ghz, HT20&HT40

Frequency band

20Mhz Channel : 2412-2472 Ghz / 5180-5320 Ghz / 5500-5700

Ghz / 5755-5795 Ghz

3_1_2 Wireless Connectivity

/ Wi-Fi

WiFi connection is optional in Lane/7000 or Lane/8000. This feature is useful to wirelessly connect your terminal to the IP network avoiding the cabling task:

Ghz / 5700 Ghz / 5745-5805 Ghz 40Mhz Channel : 2442-2452 Ghz / 5190-5310 Ghz / 5510-5670

www.ingenico.com

28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35

Ingenico – S.A. au capital de 53 086 309 € / 317 218 758 RCS PARIS

Radio transfer rate

From 1 Mbit/s to 135 Mbit/s

Distance

Indoor: 70m typical, mini 100m in free sight

Max output power

2.4Ghz : 23dBm 5Ghz : 13 dBm

Home security

WPA, WPA2

Enterprise security

EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAPv0, EAP-SIM

Feature

Bluetooth V2.0

Chipset

BC08, CSR8811: http://www.csr.com/sites/default/files/csr8811.pdf

Standard compliance

Bluetooth 4.0 (Frequency : 2.4Ghz) Bluetooth 4.2 planned on roadmap (Frequency: 2.4Gz)

Profile

SPP Other profile to be analyzed on request

Radio transfer rate

1 Mbit/s 3Mbit/s (EDR)

Number of supported links on SPP

1 open link to PCL 4 reserved for peripherals (barcode, printer, …)

Range

Bluetooth Class 2 – max 10m in free sight

Maximum output power

GFSK : 1.5 dBm 8 DPSK : 2.1 dBm

/ Bluetooth

A2DP

Pi/4 DQPSK : 1.8 dBm

9/12 MODU/7002

3_1_3 Internal Frequencies

• Bluetooth : o Quartz = 26Mhz

• Wifi : o Quartz = 40Mhz

10/12 MODU/7002

4_Norms&Marking

4_1 1 Federal Communications Commission (FCC) Statement &

Industry Canada (IC) Statement

Modular transmitter 15.212

Changes or modific ations made to the equ ipment not express ly approved b y INGENICO ma y void the FCC / IC authorization to operate this equipment.

The use of the transceiver m odule is auth orized i n m obile or fixed hos t devices tak ing into acc ount the conditions listed below:

• OEM Integrator m ust ensur e that the end us er m anual ma y not contai n any inf orm ation about

the way to install or remove the module from the final product.

• Depending on the final host device additional authorization requirements for the non-

transmitter functions of the transmitter module may be required (i.e., Verification, or Declaration of Conformity) The OEM integrator is responsible for ensuring that after the module is installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements.

• The information on the lab el and in t he user manual i s requir ed to be incorpor ated in the user

manual of the fina l host. see 47 CFR15 requirem ents for more details (e.g. 15.19 / 15.21 /

15.101 / 15.105 / RSS-GEN / ICES)

• Additional label with the wor ds ‘Contains FCC ID: XKB-M7002WIBT’ and ‘Contains IC: 2586D -

M7002WIBT’ shall be applied and visible from the outside of the host product.

• The module must be installed and used in strict accordance with the manufacturer’s

instructions as described in the user documentation that comes with the module.

• The end user manual for the final host product operating with this transmitter must include

operating instructions to satisfy RF exposure compliance requirements.

Radiofrequency radiation exposure Information : This equipment com plies with FCC radiat ion ex posur e lim its s et for th for an u ncon trolled en vironm ent.

This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

• The antenna of the module may not be removed, replaced nor modified. The antenna must

not be co-located or operating in conjunction with any other antenna or transmitter. No additional antenna must be used.

11/12 MODU/7002

• When the final host product operating with this transmitter deviate from above, installation of

this module into specific final hosts may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentic atio n, or ne w applica t ion if appr o priat e. Feel free to contact us if additional guidance is required.

12/12 MODU/7002