Your INFINITI represents a new way of thinking
about car design. It integrates advanced engineering and superior craftsmanship with a simple,
refined aesthetic sensitivity associated with traditional Japanese culture.
The result is a different notion of luxury and beauty.
The car itself is important, but so also is the sense
of harmony that the car evokes in its driver, and the
sense of satisfaction you feel with the INFINITI
—from the way it looks and drives to the high level
of dealer service.
To ensure that you enjoy your INFINITI to the
fullest, we encourage you to read this Owner’s
Manual immediately. It explains all of the features,
controls and performance characteristics of your
INFINITI; italsoprovidesimportantinstructions and
safety information.
A separate Warranty Information Booklet is to be
found in your Owner’s literature portfolio. Always
carry it with you when you take your INFINITI to an
authorized dealer. The portfolio contents provide
complete information about all warranties covering
this vehicle, the periodic maintenance required to
keep the warranties in effect as well as the INFINITI
Roadside Assistance program.
INFINITI is dedicated to providing a satisfying
ownership experience for as long as you own your
car. Should you have any questions regarding your
INFINITI or your INFINITI dealer, please contact our
Consumer Affairs department at 1-800-662-6200.
In Hawaii 531-0231 (Oahu number). In Canada
1-800-363-4520. Thank you.
WHEN READING THE
MANUAL
This manual includes information for
all options available on this model.
Therefore, you may find some information that does not apply to your vehicle.
All information, specifications and illustrations in this manual are those in effect at the
time of printing. INFINITI reserves the right to
change specifications or design at any time
without notice.
MODIFICATION OF YOUR
VEHICLE
This vehicle should not be modified.
Modificationcouldaffectits
performance, safety or durability,
and may even violate governmental
regulations. In addition, damage or
performanceproblemsresulting
from modification may not be covered under INFINITI warranties.
READ FIRST — THEN DRIVE
SAFELY
Before driving your vehicle please read your
Owner’s Manual carefully. This will ensure
familiarity with controls and maintenance requirements, assisting you in the safe operation of your vehicle.
WARNING
IMPORTANT SAFETY
INFORMATION
REMINDERS FOR SAFETY!
Follow these five important driving
rules to help ensure a safe and
comfortable trip for you and your
passengers!
● NEVER drive under the influence
of alcohol or drugs.
● ALWAYS observe posted speed
limits and never drive too fast for
conditions.
● ALWAYS use your seat belts and
appropriate child restraint systems.
● ALWAYSprovideinformation
about the proper use of vehicle
safety features to all occupants of
the vehicle.
● ALWAYS review this Owner’s
Manual for important safety information.
IMPORTANT INFORMATION
ABOUT THIS MANUAL
You will see the various symbols in this
manual. They are used in the following ways:
WARNING
This is used to indicate the presence
of a hazard that could cause death or
serious personal injury. To avoid or
reduce the risk, the procedures must
be followed precisely.
CAUTION
This is used to indicate the presence
of a hazard that could cause minor or
moderate personal injury or damage
to your vehicle. To avoid or reduce
the risk, the procedures must be
followed carefully.
SII0151
If you see this symbol, it means ‘‘Do not do
this’’ or ‘‘Do not let this happen’’.
All rights reserved. No part of this Owner’s Manual may be
reproduced or stored in a retrieval system, or transmitted
in any form, or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior
written permission of Nissan Motor Co., Ltd.
TABLE OF CONTENTS
INSTRUMENTS AND CONTROLS.......................................................... 1-1
PRE-DRIVING CHECKS AND ADJUSTMENTS............................................ 2-1
See the page indicated in parentheses for operating details.
SII0122
1-2
METERS AND GAUGES
H
INSTRUMENTS AND CONTROLS
SII0123
1-3
SII0027
SPEEDOMETER
The speedometer indicates vehicle speed.
ODOMETER
The odometer records the total mileage the
vehicle has been driven.
INSTRUMENTS AND CONTROLS
TRIP ODOMETER
The trip odometer records the distance of
individual trips. Before each trip, set the trip
odometer to zero by pushing the RESET
button.
TACHOMETER
The tachometer indicates engine speed in
revolutions per minute (r/min).
IIC023M
CAUTION
When engine speed approaches the
red zone, shift to a higher gear.
Operating the engine in the red zone
may cause serious engine damage.
1-4
ENGINE COOLANT TEMPERATURE GAUGE
The gauge indicates engine coolant temperature.
IIC024M
Engine coolant temperature will vary with the
outside air temperature and driving conditions.
INSTRUMENTS AND CONTROLS
CAUTION
If the gauge indicates over the normal range, stop the vehicle as soon
as safely possible. If the engine is
overheated, continued operation of
the vehicle may seriously damage
the engine. See ‘‘In case of emergency’’ section for immediate action
required.
FUEL GAUGE
The gauge indicates the APPROXIMATE fuel
level in the tank.
IIC025M
The gauge may move slightly during braking,
turning, acceleration, or going up or down
hill.
The gauge needle is designed to remain in
approximately the same position, even when
the ignition key is turned ‘‘OFF’’.
Refill the fuel tank before the gauge
registers Empty.
1-5
INSTRUMENTS AND CONTROLS
WARNING/INDICATOR LIGHT AND CHIME
orBrake warning lightSupplemental air bag warning lightMalfunction indicator light.
Apply the parking brake and turn the ignition
key to ‘‘ON’’ without starting the engine. The
following lights will come on:
,or,,,,
or
orAnti-lock brake system
warning light
The following lights come on briefly and then
go off:
,
If any light fails to come on, it may indicate a
burned-out bulb or an open circuit in the
electrical system. Have the system repaired
promptly.
1-6
Low fuel warning light
Engine oil pressure warning light
This light warns of low engine oil pressure. If
the light flickers or comes on during normal
driving, pull off the road in a safe area, stop
the engine immediately and call an INFINITI
dealer or other authorized repair shop.
INSTRUMENTS AND CONTROLS
The oil pressure warning light is not
designed to indicate a low oil level.
Use the dipstick to check the oil level.
See ‘‘Engine oil’’ in the ‘‘Do-it-yourself’’ section.
CAUTION
Running the engine with the oil pressure warning light on could cause
serious damage to the engine almost immediately. Turn off the engine as soon as it is safe to do so.
See section 5, In case of emergency.
Charge warning light
If the light comes on while the engine is
running, it may indicate that there is something wrong with the charging system. Turn
the engine off and check the alternator belt. If
the belt is loose, broken, missing or if the
light remains on, see your INFINITI dealer
immediately.
CAUTION
Do not continue driving if the belt is
loose, broken or missing. See section 5, In case of emergency.
Low fuel warning light
This light comes on when the fuel in the tank
is getting low. Refuel as soon as it is
convenient, preferably before the fuel gauge
reaches ‘‘E’’.
There should be a small reserve of fuel
remaining in the tank when the fuel
gauge needle reaches ‘‘E’’.
Door open warning light
This light comes on when any of the doors are
1-7
not closed securely while the ignition key is
‘‘ON’’.
Supplemental air bag
warning light
When the ignition key is in the ‘‘ON’’ or
‘‘START’’ position, the supplemental air bag
light will illuminate for about 7 seconds and
then turn off. This means the system is
operational.
If any of the following conditions occur, the
supplemental air bag needs servicing and
your INFINITI must be taken to your nearest
authorized INFINITI dealer.
1. The supplemental air bag light goes off
within 7 seconds.
2. The supplemental air bag light flashes
intermittently or remains on (after 7 seconds).
3. The supplemental air bag light does not
come on at all.
INSTRUMENTS AND CONTROLS
Unless checked and repaired, the Supplemental Restraint System may not function properly.
For additional details on the Supplemental Air
Bag System, see section 2.
WARNING
If the supplemental air bag warning
light is on, it could mean that the
supplemental air bag system will not
operate in an accident.
Seat belt warning light
and chime
The light and chime remind you to fasten seat
belts. The light illuminates whenever the
ignition key is turned to ‘‘ON’’, and will remain
illuminated until the driver’s seat belt is
fastened. (When the ignition key is turned to
‘‘ON’’ with the driver’s seat belt fastened, the
light will illuminate for about 7 seconds and
then go off.) At the same time, the chime will
sound for about six seconds unless the
driver’s seat belt is securely fastened.
Refer to ‘‘Seat belts’’ in the ‘‘Pre-driving
checks and adjustments’’ section for precautions on seat belt usage.
If the seat belt warning light blinks, there may
be something wrong with the pre-tensioner
seat belt. In this case, the pre-tensioner will
not operate properly. Have it checked by your
INFINITI dealer.
For additional details on the pre-tensioner
seat belt system, see section 2.
Low washer fluid warning
light
This light comes on when the washer tank
fluid is at a low level. Add washer fluid as
necessary. See the ‘‘Do-it-yourself’’ section.
1-8
orBrake warning
light
This light functions for both the parking brake
and the foot brake systems.
Parking brake indicator:
The light comes on when the parking brake is
applied.
Low brake fluid warning:
The light warns of a low brake fluid level. If the
light comes on while the engine is running
with the parking brake not applied, stop the
vehicle and perform the following:
1. Check the brake fluid level. Add brake fluid
as necessary. See ‘‘Brake and clutch fluid’’
in the ‘‘Do-it-yourself ’’ section.
2. If the brake fluid level is correct:
Have the warning system checked by an
INFINITI dealer.
INSTRUMENTS AND CONTROLS
WARNING
●
Your brake system may not be
working properly if the warning
light is on. Driving could be dangerous. If you judge it to be safe,
drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed.
●
Pressing the brake pedal with the
engine stopped could increase
your stopping distance and require greater pedal effort as well
as pedal travel.
●
If the level is below the MINIMUM
mark on the brake fluid reservoir,
do not drive until the brake system has been checked at an
INFINITI dealer.
orAnti-lock brake
warning light
If the light comes on while the engine is
running, it may indicate there is something
wrong with the anti-lock portion of the brake
system. In either case, have the system
checked by your INFINITI dealer.
If an abnormality occurs in the system, the
anti-lock function will cease but the ordinary
brakes will continue to operate normally.
If the light comes on while you are
driving, contact your INFINITI dealer for
repair.
A/T check
When the ignition switch is turned ON, the
light comes on for 2 seconds. If the light
blinks for approximately 8 seconds, it may
indicate that there is something wrong with
the transmission. Have your INFINITI dealer
check and repair the transmission.
1-9
Turn signal/hazard indicator lights
The light flashes when the turn signal switch
lever or hazard switch is turned on.
Stop/tail warning light
If the light comes on with the engine running
and with the light switch on, or when the brake
pedal is depressed, one or more stop/tail light
bulbs are burned out. Replace the stop/tail
light bulb.
High beam indicator light
(Blue)
This light comes on when the headlight high
beam is on and goes out when the low beam
is selected.
CRUISE indicator light
The light comes on while the vehicle speed is
controlled by the cruise control system.
INSTRUMENTS AND CONTROLS
Key reminder chime
The chime will sound if the driver side door is
opened while the key is left in the ignition
switch. Remove the key and take it with you
when leaving the vehicle.
Light reminder chime
A chime will sound when the driver side door
is opened if the light switch is turned on
(ignition switch is turned off).
Turn the light switch off when you leave the
vehicle.
Brake pad wear warning
The disc brake pads have audible wear warnings. When a brake pad requires replacement,
it will make a high pitched scraping sound
when the vehicle is in motion whether or not
the brake pedal is depressed. Have the brakes
checked as soon as possible if the warning
sound is heard.
Malfunction indicator light
(MIL)
If the Malfunction indicator light comes on
steady or blinks while the engine is running,
it may indicate a potential emission control
problem.
The Malfunction indicator light will come on
in one of two ways:
● Malfunction indicator light on steady —
An emission control system malfunction
has been detected. Have the vehicle
inspected by an authorized INFINITI
dealer. You do not need to have your
vehicle towed to the dealer.
● Malfunction indicator light blinking — An
engine misfire has been detected which
may damage the emission control system.
To reduce or avoid emission control system damage:
* do not drive at speeds above 45 MPH
(72 km/h).
1-10
* avoid hard acceleration or deceleration.
* avoid steep uphill grades.
* if possible, reduce the amount of cargo
being hauled or towed.
The malfunction indicator light may stop
blinking and come on steady.
Have the vehicle inspected by an authorized INFINITI dealer. You do not need to
have your vehicle towed to the dealer.
CAUTION
Continued vehicle operation without
having the emission control system
checked and repaired as necessary
could lead to poor driveability, reduced fuel economy, and possible
damage to the emission control system, which may affect your warranty
coverage.
INSTRUMENTS AND CONTROLS
Some conditions may cause the malfunction
indicator light to come on steady or blink. For
example, running the vehicle out of fuel,
which causes the engine to misfire, may cause
the malfunction indicator light to come on
steady or blink.
If you suspect that you experienced such a
condition, drive the vehicle to an authorized
INFINITI dealer and have the vehicle inspected. Avoid any unnecessary diagnosis
during the service by informing the dealer of
the condition that may have occurred.
THEFT WARNING
The theft warning system provides visual and
audio alarm signals if parts of the vehicle are
disturbed.
How to activate the theft warning system
1. Close all windows.
2. Remove the key from the ignition switch.
3. Close and lock all doors, hood and trunk
lid. The doors can be locked either with or
without the key.
The system can be activated even if the
windows are open.
4. Confirm that the indicator light comes on.
The light will glow for about 30 seconds
and then go out. The system is now
activated. If, during this 30 second time
period, the door is unlocked or the ignition
key is turned to ‘‘ACC’’ or ‘‘ON’’, the system
will not activate.
● If the key is turned slowly when
locking the door, the system may not
activate. Furthermore, if the key is
turned excessively to the unlock position, the system may be deactivated when the key is removed. If
the indicator light fails to glow for 30
seconds, unlock the door once and
lock it again.
● Even when the driver and/or passen-
1-11
gers are in the vehicle, the system
will activate with all doors, hood,
trunk lid and back door locked and
ignition key off. Turn the ignition key
to ‘‘ACC’’ to turn the system off.
Theft warning system operation
The warning system will give the following
alarm:
● The headlights blink and the horn sounds
intermittently. In addition, the starter motor
will not operate.
● The alarm automatically turns off after 2 to
4 minutes; however, the alarm will reactivate if the vehicle is tampered with again.
The alarm is activated by:
● Unlocking the door or opening the trunk
lid without using the key or multi-remote
controller. (Even if the door is opened by
releasing the door inside lock knob or the
trunk lid is opened by operating the trunk
INSTRUMENTS AND CONTROLS
lid release switch, the alarm is activated.)
● Opening the hood.
● Pushing in or pulling out of the key
cylinder on the door or trunk lid.
How to stop alarms
The alarm will stop only by unlocking a door
ortrunk lidwith thekey. The alarmwill notstop
if the ignition switch is turned to ‘‘ACC’’ or
‘‘ON’’.
If the system does not operate as described above, have it checked by your
INFINITI dealer.
WINDSHIELD WIPER AND
WASHER SWITCH
IIC026MA
The windshield wiper and washer operates
when the ignition key is in the ‘‘ACC’’ or ‘‘ON’’
position.
Push the lever down to operate the wiper. Pull
the lever toward you to operate the washer.
Intermittent operation can be adjusted from 4
to 12 seconds by turning the knob.
1-12
CAUTION
The following could damage the
washer system:
●
Do not operate the washer continuously for more than 30 seconds.
●
Do not operate the washer if the
reservoir tank is empty.
WARNING
In freezing temperatures the washer
solution may freeze on the windshield and obscure your vision which
may lead to an accident. Warm the
windshield with the defroster before
you wash the windshield.
INSTRUMENTS AND CONTROLS
REAR WINDOW AND OUTSIDE DOOR MIRROR DEFOGGER SWITCH
IIC027M
To defog the rear window glass and the
outside door mirrors, start the engine and
push the switch on. (The indicator light will
come on.) Push the switch again to turn the
defogger off.
It will automatically turn off in approximately
15 minutes.
CAUTION
When cleaning the inner side of the
rear window, be careful not to
scratch or damage the rear window
defogger.
1-13
HEADLIGHT AND TURN
SIGNAL SWITCH
Lighting
SII0014
Turn the switch to the ‘‘’’ position:
The parking, front and rear side marker, tail,
license plate and instrument lights will come
on.
Turn the switch to the ‘‘
Headlights will come on and all the other
lights remain on.
’’ position:
INSTRUMENTS AND CONTROLS
Daytime running light system
(For Canada)
The headlights automatically illuminate at a
reduced intensity when the engine is started
with the parking brake released. The daytime
running lights operate with the headlight
switch in the ‘‘OFF’’ position or in the ‘‘
position. Turn the headlight switch to the
‘‘
’’ position for full illumination when
driving at night.
If the parking brake is applied before the
engine is started, the daytime running lights
do not illuminate. The daytime running lights
illuminate once the parking brake is released.
The daytime running lights will remain on
until the ignition switch is turned off.
WARNING
When the daytime running light system is active, tail lights on your
vehicle will not be on. It is necessary
’’
at dusk to turn on your headlights.
Failure to do so could cause an
accident injuring yourself and others.
To select the high beam, push the lever for-
1-14
SII0015
ward. Pull it back to select the low beam.
Passing signal
Pulling the lever toward you will flash the
headlight high beam.
Turn signal
SII0016
Move the lever up or down to signal the
turning direction. When the turn is completed,
the turn signals cancel automatically.
Lane change signal
To indicate a lane change, move the lever up
INSTRUMENTS AND CONTROLS
or down to the point where lights begin
flashing.
INSTRUMENT BRIGHTNESS CONTROL
IIC028M
The instrument brightness control operates
when the head light switch is in the ‘‘
’’ position.
‘‘
Turn the control to adjust the brightness of the
instrument panel lights.
When the control is turned in the upper
direction until a click sound is heard, the light
’’ or
intensity will be at maximum. When the
control is turned in the lower direction until a
click sound is heard, the light will be turned
off.
HAZARD WARNING
FLASHER SWITCH
IIC029M
Push the switch on to warn other drivers when
you must stop or park under emergency conditions. All turn signal lights will flash.
1-15
WARNING
●
When stalled or stopped on the
roadway under emergency conditions, move the vehicle well off
the road.
●
Do not use the switch while moving on the highway unless unusual circumstances force you to
drive so slowly that your vehicle
might become a hazard to other
traffic.
●
Turn signals do not work when the
switch is operating.
The flasher can be actuated with the ignition
switch either off or on.
Some state laws may prohibit the use of
the hazard warning flasher switch while
driving.
INSTRUMENTS AND CONTROLS
HEATED SEAT
IIC037
The front seats are warmed by built-in heaters.
The switches located on the side part of the
seats can be operated independently of each
other.
1. Start the engine.
The battery could run down if the heater
is operated while the engine is not
running.
2. Push the ‘‘LO’’ or ‘‘HI’’ position of the
switch, as desired, depending on the temperature. The indicator light in the switch
will illuminate.
The heater is controlled by a thermostat,
automatically turning the heater on and off.
The indicator light will remain on as long
as the switch is on.
3. When the vehicle’s interior is warmed or
before you leave the vehicle, be sure to
turn the switch off.
1-16
CAUTION
Do not use the seat heater for a long
time or when no one is seated there.
●
Do not put anything on the seat
which insulates heat, such as a
blanket, cushion, seat cover, etc.
Otherwise, the seat may become
overheated.
●
Do not place anything hard or
heavy on the seat or pierce it with
a pin or similar object. This may
result in damage to the heater.
●
Any liquid spilled on the heating
seatshouldbeimmediately
wiped up with a dry cloth.
●
When cleaning the seat, never
use benzine, thinner, or any similar materials.
INSTRUMENTS AND CONTROLS
●
If any abnormalities are found or
the heating seat does not operate, turn the switch OFF and have
the system checked by your
INFINITI dealer.
CIGARETTE LIGHTERS
AND ASHTRAYS
SII0069
The cigarette lighter operates when the ignition switch is in the ‘‘ACC’’ or ‘‘ON’’ position.
Push the lighter in all the way, then release it.
When the lighter is heated, it will spring out.
1-17
Return the lighter to its original position after
use.
To empty the ashtray, pull up on the horizontal
bar and remove the tray.
SII0070A
WARNING
The cigarette lighter should not be
used while driving in order that full
attention may be given to the driving
operation.
CAUTION
The cigarette lighter socket is a
power source for the cigarette
lighter element only. The use of the
cigarette lighter socket as a power
source for any other accessory is not
recommended.
INSTRUMENTS AND CONTROLS
CUP HOLDER
IIC031M
To open, push the cup holder opener switch.
To close, lower the cup holder lid and push
down lightly.
WARNING
●
The cup holder should not be
used while driving in order that
full attention may be given to the
driving operation.
CAUTION
●
Avoid abrupt starting and braking
when the cup holder is being used
to prevent spilling the drink. If the
liquid is hot, it can scald you or
your passenger.
●
Use only soft cups in the cup
holder. Hard objects can injure
you in an accident.
1-18
INSTRUMENTS AND CONTROLS
BOOK HOLDERCARGO NET
IIC042MA
● Do not put heavy objects in the cargo
net. The net is designed only to hold
light packages or objects in place
while driving.
IIC044M
1-19
INSTRUMENTS AND CONTROLS
POWER WINDOW
WARNING
●
Make sure that all passengers
have their hands, etc. inside the
vehicle before closing the windows. Use the window lock switch
to prevent unexpected use of the
power windows.
●
Do not leave children unattended
inside the vehicle. They could
unknowingly activate switches or
controls and become trapped in a
window.Unattendedchildren
could become involved in serious
accidents.
The power windows only operate when the
ignition key is in the ‘‘ON’’ position.
SII0025A
To open or close the window, push down or
pull up the switch and hold it. The main
switch (driver side switches) will open or
close all the windows.
1-20
Locking passenger’s window
When the lock button is pushed in, only the
driver side window can be opened or closed.
Push it in again to cancel.
IIC033M
The passenger side switch will open or close
only the corresponding window. To open or
close the window, hold the switch down or up.
INSTRUMENTS AND CONTROLS
POWER WINDOW AUTOMATIC SWITCH
SII0152
To fully open the driver side window, completely press down the switch and release it; it
need not be held. The window will automatically open all the way. To stop the window,
just pull up the switch toward the ‘‘CLOSE’’
side.
A light press on the switch will cause the
window to open until the switch is released.
SUNROOF
The sunroof will only operate when the ignition key is in the ‘‘ON’’ position.
Sliding the sunroof
IIC035M
To open the roof, keep pressing the switch to
the ‘‘OPEN’’ side.
To close the roof, keep pressing the switch to
the ‘‘CLOSE’’ side.
Tilting the sunroof
To tilt up, first close the sunroof, then keep
1-21
pushing the ‘‘UP’’ side of the tilt switch. To tilt
down the sunroof, keep pushing the ‘‘DOWN’’
side.
WARNING
●
In an accident you could be
thrown from the vehicle through
an open sunroof. Always use seat
belts and child restraints properly.
●
Do not allow anyone to stand up
or extend any portion of their
body out of the opening while the
vehicle is in motion or while the
sunroof is closing.
CAUTION
●
Remove water drops, snow, ice
or sand from the sunroof before
opening.
●
Do not place any heavy object on
the sunroof or surrounding area.
INSTRUMENTS AND CONTROLS
CLOCK
CAUTION
Leaving the interior light switch in
the ON position for extended periods
of time will result in a discharged
battery.
IF THE SUNROOF DOES NOT
CLOSE
Have your INFINITI dealer check and repair the
sunroof.
SII0068
The time can be adjusted by turning the knob.
INTERIOR LIGHT
The interior light has a three-position switch.
When the switch is in the center ‘‘j’’ posi-
tion, the light will illuminate when a door is
opened.
1-22
IIC038M
INSTRUMENTS AND CONTROLS
Illuminated entry system
When the light switch is set at the center ‘‘j’’
position and the front door handle is pulled
and released once, the interior light and
ignition key light will come on and gradually
go out. This system is helpful at night to
locate the ignition key slot or check the
vehicle interior.
VANITY MIRROR LIGHT
IIC041M
The light on the vanity mirror will turn on
when the cover on the vanity mirror is opened.
PERSONAL LIGHTCONSOLE LIGHT
IIC039M
With the console light switch turned on, the
light will come on by turning the headlight
and turn signal switch to the ‘‘
’’ position. The light is designed to
IIC040M
1-23
‘‘
illuminate the switches, etc. on the center
console and the automatic transmission shift
IPD075M
’’ or
lever to make them easier to see and use at
night.
Normally, keep the console light switch turned
on. Switch off the console light when not
needed.