INDESIT BWSE 61052 W UA Daily Reference Guide

Quick Guide

THANK YOU FOR BUYING A INDESIT PRODUCT

In order to receive a more complete assistance, please register your product on

www.indesit.com/register

CONTROL PANEL

1. ON/OFF button

2. START/PAUSE button and indicator light

3. TEMPERATURE button

4. DISPLAY

5. CHILD LOCK button

6. OPTION button

7. DELAYED START button

8. SPIN button

9. WASH CYCLE SELECTOR KNOB

10. PUSH & WASH button

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.

2 3

WASH CYCLE TABLE

Maximum load 6 kg Power input in o mode 0.5 W / in left-on mode 8 W

Wash cycle

Temperature

Default Range

1 Daily cotton 30°C

2 Daily synthetics 30°C

3 Coloureds 30°C

4 Delicates 30°C

5 Rapid 30min 30°C

6 Cotton (2) 40°C

7 Synthetics (3) 40°C

8 Mixed 40°C

9 Eco cotton

(1) 60°C

10 White cotton 60°C

11 Rapid 20°C

11 Rapid 40°C

11 Rapid 60°C

12 Duvet 30°C

13 Wool 40°C

14 Anti odour 40°C

– 30°C 1000 3,0 **

– 30°C 0 0,5 **

– 30°C 800 3,0 30

– 60°C 1000 6,0 230

– 60°C 1000 3,0 **

– 40°C 1000 6,0 **

60°C 1000 6,0 240

40°C 1000 6,0 230

– 90°C 1000 6,0 **

– 20°C 800 1,5 **

– 40°C 1000 3,0 **

– 60°C 1000 6,0 **

– 30°C 1000 1,0 **

– 40°C 800 1,0 **

– 40°C 1000 2,5 **

Maxim

spin

(r.p.m.)

Rinse + Spin – – 1000 6,0 ** –

Spin + Drain * – – 1000 6,0 ** – – – – – – –



Required dosage  Optional dosage

The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation 1061/2010: This cycle is designed for normally soiled cotton loads and is the most ecient in terms of both electricity and water consumption; it should be used for garments washable at 60°C or at 40°C. The actual washing temperature may dier from the indicated value.

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

Maximum

load (kg)

Duration

(minutes)

For all testing institutes:

2) Long cotton cycle: set cycle 6 at a temperature of 40°C.

3) Long synthetics cycle: set cycle 7 at a temperature of 40°C.

Detergents and

Recommended

Additives

Wash

Fabric

softener

Powder Liquid

2 3

 

   

 

   

 

   

 



detergent

Residual

–



– – –

71 0,20 30

62 0,97 63

– – –

–



- - -

62 0,93 49

62 0,97 63

– – –

–



– – –

–



– – –

– – – – –

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only. ** The duration of the wash cycles can be checked on the display.

DETERGENT DISPENSER DRAWER

Compartment 1:

Do not insert detergent in this compartment.

Compartment 2: Washing detergent (powder

or liquid)

If liquid detergent is used, the removable plastic partition A (supplied) should be used for proper dosage. If powder detergent is used, insert the partition into slot B.

Compartment 3: Additives (fabric softener, etc.)

The fabric softener must never exceed the “max” level indicated on the central pin. ! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging. ! To remove the drawer, press lever C and pull the drawer outwards.

Energy con-

dampness %

sumption kWh

Total water l

WASH CYCLES

40° 60°

Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum recommended temperature for washing the garment.

Daily cotton A 30°C cycle for cotton garments. It allows for reducing electricity consumption for heating the water while guaranteeing good washing performance. Suitable for lightly soiled garments. Daily synthetics A 30°C cycle for synthetic garments. It allows for reducing electricity consumption for heating the water while guaranteeing good washing results. Suitable for lightly soiled garments. Coloureds A 30°C cycle that helps to preserve colours, suitable for cotton or synthetic coloured garments. It allows for reducing electricity consumption for heating the water while guaranteeing good washing results. Suitable for lightly soiled garments. Delicates Suitable for washing very delicate garments. It is advisable to turn the garments inside out before washing them. For best results, use liquid detergent on delicate garments.

Rapid 30min

For washing lightly soiled garments in a short time. Not suitable for wool, silk and garments to be washed by hand.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of resistant linen and cotton that are moderately to heavily soiled. Synthetics Suitable for washing moderately soiled garments made of synthetic bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres. Mixed A 40°C cycle for washing cotton and synthetic garments together. Suitable for lightly soiled underwear. Eco Cotton Suitable for washing moderately soiled cotton garments. At 40°C and 60°C it is the standard cycle for washing cotton garments, and is the most ecient in terms of combined water and electricity consumption. White cotton For heavily soiled whites and resistant colours. Rapid Allows for varying the garment treatment duration from 20’ to 60’.

- 20’: this cycle refreshes your garments in just 20 minutes.

- 45’: a short cycle designed for washing mixed cotton-synthetic garments.

- 60’: this cycle is designed to wash moderately soiled resistant cotton garments at 60°C in an hour, with good washing performance. For synthetic or mixed garments, the temperature should be lowered to 40°C. Duvet For washing clothing padded with goose down, such as double or single duvets (weighing under 1 kg), cushions or down jackets. Duvets should be loaded into the drum with their edges folded inwards and no more than ¾ of the total drum volume should be used up. For best results, it is advisable to use liquid detergent to be poured into the detergent drawer.

Wool - Woolmark Apparel Care - Blue:

The “Wool” wash cycle is approved by the Woolmark Company for washing wool garments classied as “hand-washable”, provided that the wash complies with the instructions appearing on the garment’s label and with those provided by the manufacturer of this washing machine. (M1128)

Anti odour Use this cycle (for synthetic fabrics) to wash garments with bad odours (e.g. smoke, sweat, fried food). The cycle is designed to remove bad odours while preserving the fabric bres. Rinse + Spin Designed for rinsing and spinning. Spin + Drain Designed to spin and drain the water.

DISPLAY

The display is useful when programming the machine and provides a lot of information.

C (see “Options”)

The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the Delayed Start option has been set, the countdown to the start of the selected cycle will appear. Pressing the corresponding button allows for viewing the maximum spin speed and temperature values attained by the machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle. The hourglass ashes while the machine processes the data on the basis of the selected cycle. After a maximum of 10 minutes, the icon remains steady lit and the nal time remaining is displayed. The “hourglass” icon will then switch o approximately 1 minute after the nal time remaining has been displayed. The “washing phases” relative to the selected cycle and the “washing phase” of the running cycle appear in section B:

Wash

Rinse

Spin

Drain

When lit, the symbol indicates that the set “Delayed Start” value has appeared on the display.

There are three levels in section C relative to the washing options.

Door locked indicator When lit, the symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns o before opening the door. To open the door while a cycle is in progress, press the START/PAUSE button ; if the symbol is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst time, run a wash cycle with detergent and no laundry, by setting the “Auto-Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section. Rapid programming

- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.

- Close the door.

- Press the PUSH & WASH button to start the wash cycle.

Traditional programming

- Press the ON/OFF button ; the START/PAUSE indicator light will ash slowly green.

- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the Wash Cycle Table.

- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.

- Close the door.

- Use the WASH CYCLE selector knob to select the desired wash cycle: it will be associated with a specic temperature and spin speed that can be modied. The duration of the cycle will appear on the display.

- Modify the temperature and/or spin speed: the machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible with the selected cycle. Pressing the temperature down to the cold wash “OFF” setting. Pressing the button gradually reduces the spin speed until it is completely excluded (“OFF” setting). Pressing these buttons again restores the maximum values.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative indicator light will light up steady green and the door will lock ( symbol on).

button gradually reduces the

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the indicator light will ash amber. If the symbol is not lit, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot be opened. While a wash cycle is running, the door remains locked. To open the door while a cycle is under way, for example, to add or remove garments, press the START/PAUSE button to pause the cycle; the indicator light will ash amber. If the symbol is not lit, the door may be opened. Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the relative indicator light will ash amber), then select the desired cycle and press the START/PAUSE button again. ! To cancel a cycle that has already begun, press and hold the ON/OFF button. The cycle will be stopped and the machine will switch o.

+ 2 hidden pages