Impex WM 1407 User Manual

	NOTE:
	Please read all instructions
	carefully before using this
	product
	Table of Contents
	Safety Notice	BODYFLEX GYM
	Hardware Identifier
		WM 1407
	Assembly Instruction
	Parts List
	Resistance Chart
	Warranty
	Ordering Parts
	Model
	WM 1407
	Retain This
	Manual for
	Reference
	06-04-02	IMPEX FITNESS PRODUCTS
	OWNER'S
		14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
	MANUAL	Tel: [phone] Fax: [phone]
		www.impex-fitness.com
		[e-mail]

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................……….. 1

IMPORTANT SAFETY NOTICE....................................................................……….. 2 HARDWARE IDENTIFIER.....….....................................................................……….. 3 ASSEMBLY INSTRUCTIONS.........................................................................……….. 4

PARTS LIST………………………………………………………………………………….. 13 RESISTANCE CHART……………………………………………………………………….14

WARRANTY.................................................................................................…………. 15 ORDERING PARTS.......................................................................................…………15

BEFORE YOU BEGIN

Thank you for selecting the POWERHOUSE WM1407 BODYFLEX GYM by IMPEX FITNESS PRODUCTS. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory. To avoid unnecessary delays, please call our TOLL-FREE customer service number. Our Customer Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number 1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST www.impex-fitness.com [e-mail]

1

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions:

1.Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine.

2.Only one person at a time should use the machine.

3.If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4.Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors.

5.Keep hands away from all moving parts.

6.Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine.

7.Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8.Do not place any sharp object around the machine.

9.Disabled person should not use the machine without a qualified person or physician in attendance.

10.Before using the machine to exercise, always do stretching exercises to properly warm up.

11.Never operate the machine if the machine is not functioning properly.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

2

3

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Attach the Base Frame (#5) to the Rear Base Frame (#6). Align the holes then secure them with one 4 3/8” x 1 ¾” Bracket (#19), two M10 x 2 ½” Carriage Bolts (#38), two ¾” Washers (#53), and two M10 Aircraft Nuts (#50).

B.) Attach the Rear Vertical Frame (#9) to the other end of Rear Base Frame (#6). Align the holes then secure them with one 4 3/8” x 1 ¾” Bracket (#19), two M10 x 2 ½” Carriage Bolts (#38), two ¾” Washers (#53), and two M10 Aircraft Nuts (#50).

DIAGRAM 1

4