Icom IC-M801E User Manual

❍ ITU Class E DSC for non-solas vessels

When used with the optional antenna tuner, AT-141, and the
OPC-1465 cable, the IC-M801E meets Class E DSC standards.

❍ 4×8 inch remote controller design matches

to Icom VHF radios, IC-M601 or M505

❍ Large LCD with full dot-matrix characters
❍ Built-in DC-DC power converter

Built-in DC-DC power converter provides 13.6V DC either
from 12V DC or 24V DC, depending on version.

❍ Digital IF filter provides flexible filter

setting for narrow mode operation

❍ Stable 125W* (PEP) of output power

(* 4.0–27.5MHz)

❍ Optional antenna tuner , A T -141,

with bypass function

❍ 0.5–29.999MHz continuous

receive coverage

MF/HF SSB radio telephone with Class E DSC operation

* The above photo includes optional antenna tuner, AT-141.

MF/HF MARINE TRANSCEIVER

SPECIFICATIONS

OPTIONS SYSTEM OVERVIEW

Matches the transceiver to a long wire an­tenna with little insertion loss. Antenna and
control cable receptacles are easy to install.

Remote function microphone equipped with
channel and programmable buttons.

Provides clear audio reception. Same as
supplied.

• RC-25E REMOTE CONTROLLER

Remote controller head. Same as supplied.

• SP-24E EXTERNAL SPEAKER

4×4-inch external speaker. Same as supplied. Input impedance: 4Ω. Max. input power: 7W.

For mounting the controller, RC-25E or the
SP-24E to a panel.

OPC-1465

SHIELDED
CONTROL
CABLE

MB-75 FLUSH MOUNT KIT

GND

DSC ANT

Controller

AF/MOD

REMOTE

PRINTER

ANT

GPS

Speaker

AT-141

Antenna

Tuner

To HF

Antenna

To HF Antenna

(For DSC reception)

RC-25E

SP-24E

Modem,

NBDP,

FAX system

12V or 24V

power supply

Parallel

Printer

Remote control

with

RS-232C or

NMEA format

Position and

time data

(NMEA 0183)

MF/HF MARINE TRANSCEIVER

10m shielded control cable connects be­tween AT-141 and transceiver. Protects the
transceiver from RF feedback.

HS-98 HANDSETHM-135
HAND
MICROPHONE

AT-141

AUTOMATIC
ANTENNA
TUNER

Stainless steel one-action bracket. Trans­ceiver main unit is easily attached or re­moved. The

photo shows installation example.

MB-108 MOUNTING BRACKET

• Frequency coverage

(Unit : MHz):

Receive 0.5–29.9999

(continuous)

Transmit 1.6–2.9999, 4.0–4.9999, 6.0–6.9999,

8.0–8.9999, 12.0–13.9999, 16.0–17.9999,

18.0–19.9999, 22.0–22.9999, 25.0–27.5000

DSC

2.1875, 4.2075, 6.3120, 8.4145, 12.5770, 16.8045

•Type of emission : J3E (USB/LSB*), J2B (AFSK), F1B (FSK, DSC),
A1A*

(CW), H3E* (AM)

* LSB, A1A, H3E modes are receive only

• Number of channels : 1205

(max.)

(160 programmable channels; 249 ITU SSB duplex; 124 ITU

SSB simplex; 662 ITU FSK duplex; 10 Semi/auto channels)

• Antenna impedance : 50Ω

(SO-239×2)

•

Power supply requirement

:
12V version 10.8V–15.6V DC (floating ground)
24V version 21.6V–31.2V DC (floating ground)

• Current drain :
Tx Max. power 60A/30A

(12V/24V version)

Rx Max. audio Less than 6.0A/3.0A (12V/24V version)

• Operating temp. range : –15°C to +55°C

• Frequency stability : ±10Hz

(Approx. 5 min. after battery connection)

• Dimensions (Projections not included):
Main unit 367

(W)

×95

(H)

×260

(D)

mm
Controller (RC-25E) 220(W)×110(H)×84.4(D)mm
Speaker (SP-24E) 110

(W)×110(H)×84.4(D)mm

•Weight

:

Main unit

8.5kg
Controller (RC-25E) 570g
Speaker (SP-24E) 370g

• Output power

(With AT -141)

:

1.6–3.999MHz

85W PEP

4.0–27.500MHz 125W PEP

• Spurious emissions : 43dB below peak output power

• Carrier suppression :40dB below peak output power

• Unwanted sideband : 55dB below peak output power

(With 1kHz AF input; at Max. power)

• Microphone connector : 8-pin connector (2.4kΩ)

• Sensitivity (at 20dB SINAD; emf)

:

• Spurious response rejection :

0.5–29.9999MHz More than 70dB

DSC More than 70dB

(except 1⁄22nd IF image)

•

Audio output power (at 12/24V DC):4.0W typical at 10% distortion

with a 4Ω load

• Clarity variable range : ±150Hz

• Headphone connector : 3-conductor 3.5

(d) mm (1⁄8"

)

• Speaker connector : 2-conductor 3.5 (d) mm (

1

⁄8") /4Ω

GENERAL TRANSMITTER

RECEIVER

Measurements made in accordance with EN300 373-2 and EN300 373-3.
All stated specifications are subject to change without notice or obligation.

0.5– 1.5999MHz

1.6– 1.7999MHz

1.8– 3.9999MHz

4.0–29.9999MHz

J3E, A1A

30dBµV
13dBµV

8dBµV

J2B, F1B

–

13dBµV

8dBµV

H3E
44dBµV
30dBµV
24dBµV

–

DSC

0dBµV

(at 1%

error rate)

Supplied accessories:

●

Separation cable, OPC-1466

● External speaker, SP-24E ● Handset, HS-98

● GPS plugs ● Mounting bracket ●DC power cables ● Spare fuses

Some options may not be available in some countries. Please ask your dealer for details.

Les spécifications et informations données dans ce document peuvent être modifiées sans préavis.

ICOM FRANCE

Zac de la Plaine - 1, Rue Brindejonc des Moulinais
BP 5804 - 31505 TOULOUSE CEDEX
Tél : [phone] - Fax : [phone]

WEB ICOM : http://www.icom-france.com
E-mail : [e-mail]

CACHET REVENDEUR