HF TRANSCEIVER
Advanced selective call and ALE make
CONTROLLER
GPS
ACC
REMOTE REF IN AF/MOD
TUNER
GND
EXT SP
DC 13.8V
ANT
EMG
I/O
TUNE SCAN CALLMUTE
1QZ2
ABC3DEF
4
GHI5JKL6MNO
7
PRS8TUV9WXY
CLR
0
@?
OK
HF TRANSCEIVER iF7000
GPS receiver
(Not supplied from Icom)
RC-26
HM-155
HF e-mail or
PC remote control
(Not supplied from Icom)
HF modem
(Not supplied from Icom)
PC control with
NMEA format
To ACC connector or
AF/MOD connector
SP-25
The speaker connec-
tion is selectable.
*1 GPS position call, GPS beacon call, Pagecall and Status call use Icom original commands. These calls may not be compatible with other brands.
*2 Please consult with a telephone interconnect service provider for details.
Other capabilities available with selective call and ALE
Selcall
Make an individual/group call using a unique 4-digit (or 6-digit) address. The receiving station sends back
an acknowledge
(ACK) signal and the scanning stops to allow you to communicate.
Selective beacon call allows you to check the propagation before an individual/ group call.
The receiving station sends back an ACK signal and continues scanning.
GPS beacon call*
1
allows you to request the intended ID station to send position information.
The receiving station automatically sends back position information.
GPS position call*
1
allows you to send your own position information to the intended ID station.
Status call*
1
requests to send radio status information including power supply voltage, output power
and VSWR. This allows you to monitor the radio station from a remote location.
Pagecall*
1
allows you to send and receive up to 64-character text messages with the intended ID
station. Received messages are recorded in the memory of the radio.
Telcall*
2
allows you to make a telephone call through a telephone interconnect service provider.
Up to a 16-digit telephone number can be programmed.
Allows you to broadcast an emergency signal with own position information.
The RFDS
(Royal Flying Doctor Service) emergency call uses a 2-Tone signal for an emergency call.
(* Australia version only)
Automatically sends a sounding signal at a certain interval (0.5–16 hours) to check the channel
propagation and stores the data in a table.
Automatically selects the best available channel using the ALE table and establishes a connection.
The ALE system complies with the basic requirements of MIL-STD 188-141-B
(Appendix A).
Allows you to send and receive up to a 90-character text message using the ALE function.
Received messages are stored in the memory of the radio.
Selective beacon call
GPS beacon call
GPS position call
Status call
Pagecall
Telcall
Emergency selcall
RFDS emergency call
*
ALE sounding
ALE individual/net call
ALE AMD
(Automatic Message Display)
HF communication easier than ever!
The IC-F7000 is an HF land mobile transceiver especially designed for
long distance communications. Such communications used to require
specially skilled operators, but the IC-F7000 makes HF LMR operation
simple and efficient with the following advanced functions and features.
❏ Selective call
Uses a unique calling address like a telephone number and allows you to
make a call directly to a desired station or group. Compatible with other
brands of radios.
❏ ALE (Automatic Link Establishment) function
This function will check frequency propagation and strength to automatically
select the highest quality signal for the best communication possible.
❏ Versatile configuration
The controller and speaker are separated from the main unit. Also, the size of
the main unit in particular has been reduced, so that the IC-F7000 can be installed almost anywhere.
Loading...