Icom IC-F110, IC-111, IC-210, IC-211 User guide

ICOM IC-F110

Dealer Programming Mode

Start the CS-F100 Cloning software, click on “Help” “About”

and now type the word “reserve” a warning will be displayed

Hit Enter and “OK”

Connect the Cloning cable to the transceiver and switch on. Click on Clone => Read

Once the transceiver has been read, Click on “Maker Reserved” Scroll down to “Set Mode
Access” the default is Inhibit, click on Inhibit

Click on “Enable”

Now download this data to the transceiver. Once done Click on Common => Common