Icom IC-F110, IC-F210 User Manual
VHF AND UHF TRANSCEIVERS
● 8-Character Alphanumeric Display
The alphanumeric LCD indicates channel, bank name and decoded
text, etc. V arious status icons for such functions as an S-meter and out put power, etc., enhance the array of information available to the user.
● 128 Memory Channels with 8 Memory Banks
Up to 128 channels with 8-character channel names can be stored
and divided into 8 banks for flexible channel management.
●
6 Prog. Buttons and Independent Volume Knob
The up/down and P0–P3 buttons allow you to customize the use of
the IC-F1 10/F210 meet your specific needs. The independent volume
knob provides quick and easy operation. An advanced radio that is
simple to use.
● Built-in 2-Tone, 5-Tone, CTCSS, DTCS
Encoder and Decoder and DTMF Encoder
Multiple signaling systems are equipped as standard. 8 DTMF autodialing memories are available. The optional DTMF decoder UT-108
provides ANI function.
● 4W (typ.) Front-mounted Speaker
● Programmable Wide/Narrow Channel Spacing
for Each Channel
● Optional Voice Scrambler, UT-109/UT-110
VHF AND UHF TRANSCEIVERS
OPTIONS
• HM-100TN DTMF MICROPHONE
• OPC-617 ACC CABLE
For external terminal connection.
• SM-25 DESKTOP MICROPHONE
Convenient for dispatching, equipped with monitor
switch.
• SP-5/SP-10/SP-22 EXTERNAL SPEAKERS
Compact and easy-to-install.
Input impedance: 4Ω; Max. input power: 5W
•UT-105SmarTrunk ΙΙ™ Logic Board
SmarTrunk ΙΙ is a trademark of SmarTrunk Systems, Inc.
•UT-108 DTMF DECODER UNIT
Provides DTMF decode and ANI capabilities.
•UT-109 VOICE SCRAMBLER UNIT
(Version 02)
•UT-110 VOICE SCRAMBLER UNIT
(Version 02)
The scrambler systems of the UT-109 and UT-110
are not compatible with each other. Ask your dealer
for details.
•UT-111 LTR
®
Trunking UNIT
LTR
is a registered trademark of E.F. Johnson Company.
SM-25 SP-10 SP-22 UT-108OPC-617HM-100TN
SPECIFICATIONS
• Frequency coverage :
IC-F110 136–174MHz
IC-F210 400–430MHz
440–490MHz
• Number of channels : Max. 128, 8 banks
• Channel Spacing : 12.5/25kHz, 12.5/20kHz
• PLL channel step : 2.5, 3.125kHz
(VHF)
5, 6.25kHz
(UHF)
• Frequency stability : ±1.5kHz
•
Operating temp. range
: –25˚C to +55˚C
•
Power supply voltage
: 13.2V DC
• Current drain : Tx at 25W 7A
Rx Max. audio 1200mA
Stand-by 300mA
• Antenna impedance : 50Ω
(SO-239)
• Dimensions : 150(W)×40(H)×117.5(D) mm
• Weight : 800g
• Output power : 25W
(at 13.2V DC)
• Max. frequency : ±5.0kHz (wide)
deviation ±4.0kHz (middle)
±2.5kHz (narrow)
• Spurious emissions : 0.25µW
(below 1GHz)
• Adjacent channel : 70dB (wide, middle)
power 60dB (narrow)
• Mic. impedance : 600Ω
(8-pin modular)
• Sensitivity : –4dBµV typ. (emf)
(at 20dB SINAD)
• Squelch sensitivity : –4dBµV
typ. (emf, threshold)
• Adjacent channel : 75dB typ. (wide, middle)
selectivity 65dB typ. (narrow)
• Spurious response : 75dB
• Intermodulation : 67dB
typ.
• Audio output power : 4.0Wtyp. at 10% dist./4Ω load
• Ext. SP connector : 2-conductor 3.5(d)mm/4Ω
Applicable U.S. Military Specifications
The IC-F110/F210 meets MIL-STD requirements and strict
environmental standards as follows.
GENERAL
Measurements made in accordance with ETS 300 086. All
stated specifications are subject to change without notice
or obligation.
Supplied Accessories
❍ Hand mic. (HM-100N) ❍DC power cable
❍ Mounting bracket kit ❍ Hanger kit
❍ Key assign stickers
TRANSMITTER
RECEIVER
ADDITIONAL FEATURES
Advanced Multi 2-Tone/5-Tone systems
●
Programmable actions when a matched tone is received
• Bell icon indication ON/OFF/Blink
• Answer back calls
• Beep sounds
• Scan Start/Stop
• Auto transmission
• Stun/Kill functions (prevents use of a lost or stolen radio)
• External out for horn drive (Optional OPC-617 is required)
●
32 Tx and 9 Rx 5-Tone codes available
●
11 Tx and Rx 2-Tone codes available
Other features
●
Hook scan function and Hook scan ON/OFF button
are assignable
●
10 scanning lists and normal/priority scan
●
Power on password
●
Reduced chassis length (117.5mm)
allows for easier installation
●
External I/O terminal socket with optional OPC-617
●
SmarTrunkΙΙ™ or LTR®Trunking capability with optional
UT-105 or UT-111, respectively
●
Backlit LCD and keys for night time operations
●
Meets MIL-STD 810 C, D, E and F specifications
Standard
MIL 810 C MIL 810 D MIL 810 E MIL 810 F
Method
Proc.
Method
Proc.
Method
Proc.
Method
Proc.
Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II
High Temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II
Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II
Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I
Solar Radiation
505.1 I 505.2 I 505.3 I 505.4 I
Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, II
Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4 –
Salt Fog 509.1 I 509.2 I 509.3 I 509.4 –
Dust 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VIII, X 514.3 I 514.4 I 514.5 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV
Les spécifications et informations données dans ce document peuvent être modifiées sans préavis.
ICOM FRANCE
Zac de la Plaine - 1, Rue Brindejonc des Moulinais
BP 5804 - 31505 TOULOUSE CEDEX
Tél : 05 61 36 03 03 - Fax : 05 61 36 03 00
WEB ICOM : http://www.icom-france.com
E-mail : icom@icom-france.com
CACHET REVENDEUR
Loading...