Hyundai Getz 2009 Owner's Manual

OWNER'S MANUAL

A030A01TB-GAT

Operation Maintenance Specifications

A030A01TB

All information in the Owner's Manual is current at the time of publication. Hyundai reserves the right to make changes at any time as part of our policy of continual product improvement may be carried out.

This manual applies to all Hyundai models and includes descriptions and explanations of optional as well as standard equipment. As a result, you may find material in this manual that does not apply to your specific vehicle.

Please note that some models are equipped with Right-Hand Drive (RHD). The explanations and illustrations for some operations in RHD models are opposite of those written in this manual.

A020A01A-AAT

RESPONSIBILITY FOR MAINTENANCE

The maintenance requirements for your new Hyundai are found in Section 5. As the owner, it is your responsibility to see that all maintenance operations specified by the manufacturer are carried out at the appropriate intervals. When the vehicle is used in severe driving conditions, more frequent maintenance is required for some operations. Maintenance requirements for severe operating conditions are also included in Section 5.

A040A01A-AAT

FOREWORD

Thank you for choosing Hyundai. We are pleased to welcome you to the growing number of discriminating people who drive Hyundais. The advanced engineering and high-quality construction of each Hyundai we build is something of which we're very proud.

Your Owner's Manual will introduce you to the features and operation of your new Hyundai. It is suggested that you read it carefully since the information it contains can contribute greatly to the satisfaction you receive from your new car.

The manufacturer also recommends that all service and maintenance on your car be performed by an authorized Hyundai dealer. Hyundai dealers are prepared to provide high-quality service, maintenance and any other assistance that may be required.

A050A04A-AAT

HYUNDAI MOTOR COMPANY

Note: Because future owners will also need the information included in this manual, if you sell this

Hyundai, please leave the manual in the vehicle for their use. Thank you.

CAUTION: Severe engine and transaxle damage may result from the use of poor quality fuels and lubricants that do not meet Hyundai specifications. You must always use high quality fuels and lubricants that meet the specifications listed on Page 9-4 in the Vehicle Specifications section of the Owner's Manual.

Copyright 2008 Hyundai Motor Company. All rights reserved. No part of this publication may be reproduced, stored in any retrieval system or transmitted in any form or by any means without the prior written permission of Hyundai Motor Company.

A070A01A-GAT

CAUTION: MODIFICATIONS TO YOUR HYUNDAI

Modification of components may void the manufacturer's warranty

Your Hyundai should not be modified in any way. Modifications may adversely affect the safety, durability and performance of your Hyundai. Components which are subjected to modification or are added to the vehicle resulting in consequential damage are not covered by the vehicle manufacturer's warranty.

A080A01S-AAT

TWO-WAY RADIO OR CELLULAR TELEPHONE INSTALLATION

Your vehicle is equipped with electronic fuel injection and other electronic components. It is possible for an improperly installed/adjusted two-way radio or cellular telephone to adversely affect electronic systems. For this reason, we recommend that you carefully follow the radio manufacturer's instructions or consult your Hyundai dealer for precautionary measures or special instructions if you choose to install one of these devices.

A090A01A-AAT

SAFETY AND VEHICLE DAMAGE WARNING

This manual includes information titled as WARNING, CAUTION and NOTE. These titles indicate the following:

WARNING:

This indicates that a condition may result in harm, serious injury or death to you or other persons if the warning is not heeded. Follow the advice provided with the warning.

CAUTION:

This indicates that a condition may result in damage to your vehicle or its equipment if the caution is not heeded. Follow the advice provided with the caution.

NOTE:

This indicates that interesting or helpful information is being provided.

A100A01L-GAT

GUIDE TO HYUNDAI GENUINE PARTS

1.What are Hyundai Genuine Parts?

Hyundai Genuine Parts are the same parts used by Hyundai Motor Company to manufacture vehicles. They are designed and tested for the optimum safety, performance, and reliability to our customers.

2. Why should you use genuine parts?

Hyundai Genuine Parts are engineered and built to meet rigid original manufacturing requirements.

Using imitation, counterfeit or used salvage parts are not covered under the Hyundai New Vehicle Limited Warranty or any other Hyundai warranty. In addition, any damage to or failure of Genuine Hyundai Parts caused by the installation or failure of an imitation, counterfeit or used salvage part is not covered by Hyundai Motor Company.

3. How can you tell if you purchasing Hyundai Genuine Parts?

Look for the Hyundai Genuine Parts Logo on the package (see below).

The export specifications are written in English only.

Hyundai Genuine Parts are only sold through authorized Hyundai Dealership and Service Center.

A100A03L

A100A01L

A100A02L A100A04L

TABLE OF CONTENTS

SECTION PAGE

1. FEATURES OF YOUR HYUNDAI ....................................................................... 1-1

2. DRIVING YOUR HYUNDAI .................................................................................. 2-1

3. WHAT TO DO IN AN EMERGENCY ................................................................... 3-1

4. CORROSION PREVENTION & APPEARANCE CARE ...................................... 4-1

5. VEHICLE MAINTENANCE REQUIREMENTS..................................................... 5-1

6. DO-IT-YOURSELF MAINTENANCE ................................................................... 6-1

7. EMISSION CONTROL SYSTEMS ....................................................................... 7-1

8. CONSUMER INFORMATION .............................................................................. 8-1

9. VEHICLE SPECIFICATIONS ............................................................................... 9-1

10. INDEX ................................................................................................................ 10-1

YOUR VEHICLE AT A GLANCE

B250A01TB-GAT

INSTRUMENTS AND CONTROLS (LEFT-HAND DRIVE)

B250A01TB

YOUR VEHICLE AT A GLANCE

1. Headlight Leveling Switch (If installed)

2. Front Fog Light Switch (If installed)

3. Multi-Function Light Switch

4. Instrument Cluster

5. Horn and Driver's Airbag (If installed)

6. Windshield Wiper/Washer Switch

7. Digital Clock

8. Hazard Warning Light

9. Audio System (If installed)

10.Passenger's Airbag (If installed)

11.Glove Box

CAUTION:

When installing a container of liquid air freshener inside a vehicle, do not place it near the instrument cluster nor on the instrument panel pad surface. If there is any leakage from the air freshener onto these areas (instrument cluster, instrument panel pad or air ventilator), it may damage these parts.If the liquid from the air freshener does leak onto these areas, wash them with water immediately.

12.Hood Release Lever

13.Fuse Box

14.Audio Remote Control Switch (If installed)

15.Heating/Air Conditioning Control Panel (If installed)

16.Cigarette Lighter

17.Ashtray

18.Front Drink Holder

19.Shift Lever (If installed)

20.Parking Brake Lever

21.Rear Drink Holder

YOUR VEHICLE AT A GLANCE

B250B01TB-GAT

INSTRUMENTS AND CONTROLS (RIGHT-HAND DRIVE)

F10

B250B01TB

YOUR VEHICLE AT A GLANCE

1. Glove Box

2. Passenger's Airbag (If installed)

3. Audio System (If installed)

4. Hazard Warning Light

5. Digital Clock

6. Windshield Wiper/Washer Switch

7. Horn and Driver's Airbag (If installed)

8. Instrument Cluster

9. Multi-Function Light Switch

10. Headlight Leveling Switch (If installed)

11. Rear Drink Holder

CAUTION:

When installing a container of liquid air freshener inside a vehicle, do not place it near the instrument cluster nor on the instrument panel pad surface. If there is any leakage from the air freshener onto these areas (instrument cluster, instrument panel pad or air ventilator), it may damage these parts. If the liquid from the air freshener does leak onto these areas, wash them with water immediately.

12. Parking Brake Lever

13. Shift Lever (If installed)

14. Front Drink Holder

15. Ashtray

16. Power Outlet (If installed)

17. Heating/Air Conditioning Control Panel

(If installed)

18. Audio Remote Control Switch (If installed)

19. Fuse Box

20. Hood Release Lever

F11

YOUR VEHICLE AT A GLANCE

B255A01TB-GAT

INDICATOR SYMBOLS ON THE INSTRUMENT PANEL

SRS (Airbag) Service Reminder Indicator

Passenger's Front Airbag OFF Indicator Light (If Installed)

Door Ajar Warning Light and Chime

Low Fuel Level Warning Light

ABS Service Reminder Indicator

O/D OFF Indicator (Automatic transaxle only)

Turn Signal Indicator Lights

High Beam Indicator Light

Low Oil Pressure Warning Light

Parking Brake/Brake Fluid Level Warning Light

Charging System Warning Light

Tail Gate Open Warning Light

* A detail explanations of these items will be found on page 1-50

F12

Malfunction Indicator Light

Seat Belt Warning Light

Electric Power Steering System (EPS) Warning Light

Electronic Stability Program Indicator Lights (If Installed)

Immobilizer Warning Light

Diesel Pre-heat Indicator Light (Diesel only)

Fuel Filter Warning Light (Diesel only)

Engine Coolant Temperature Indicator

1. FEATURES OF YOUR HYUNDAI

Fuel Recommendations ................................................................... 1-2

Breaking in Your New Hyundai ........................................................1-4

key (Immobilizer system) .................................................................1-5

Door locks (Theft-alarm system) .....................................................1-9

Power windows ..............................................................................1-13

Seat ................................................................................................1-13

Seat Belt ......................................................................................... 1-21

Child restraint system ....................................................................1-28

Supplemental restraint (AIRBAG) system .....................................1-36

Instrument cluster and indicator lights ............................................ 1-44

Warning Light and Indicator ............................................................ 1-48

Trip computer .................................................................................1-57

Multi-Function Light Switch ............................................................ 1-59

Windshield wiper/Washer Switch ...................................................1-61

Sunroof ........................................................................................... 1-69

Mirror ..............................................................................................1-73

Hood Release ................................................................................ 1-77

How to use luggage Room .............................................................1-80

Heating and cooling control ............................................................1-86

Stereo sound system .....................................................................1-95

Audio system .................................................................................1-97

Antenna ........................................................................................1-128

1- 2 FEATURES OF YOUR HYUNDAI

B010A03O-GAT

FUEL RECOMMENDATIONS Use Unleaded Gasoline

B010A01TB

For Europe – For the optimal vehicle performance, we recommend you to use unleaded gasoline with an octane rating of RON (Research Octane Number) 95 /AKI (Anti Knock Index) 91 or higher. You may use unleaded gasoline with an octane rating of RON 91~94/AKI 87~90 but it may result in slight performance reduction of the vehicle.

Except Europe – Unleaded gasoline with a Pump Octane Rating of 87 (Research Octane Number 91) or higher must be used in Hyundai vehicle.

If leaded gasoline is used, it will cause the catalytic converter to become ineffective and the emission control system to malfunction. This can also result in increased maintenance expense. To avoid accidental use of leaded fuel, the large nozzle used with leaded gasoline at service stations can not be inserted into fuel tank opening of Hyundai vehicle.

NOTE:

o For some countries, Hyundai ve-

hicles are designed to use leaded gasoline. When you are going to use leaded gasoline, ask to Hyundai dealer whether leaded gasoline in your vehicle is available or not.

o Octane Rating of leaded gaso-

line is same with unleaded one.

Diesel fuel

Diesel engine must be operated only on commercially available diesel fuel that complies with EN 590 or comparable standard. (EN stands for "European Norm"). Do not use marine diesel fuel, heating oils, or non-approved fuel additives, as this will increase wear and cause damage to the engine and fuel system.

The use of non-approved fuels and / or fuel additives will result in a limitation of your warranty rights. Diesel fuel of 52 to 54 cetane is used in Hyundai vehicle. If two types of diesel fuel are available, use summer or winter fuel properly according to the following temperature conditions.

o Above -5°C (23°F) ... Summer type

diesel fuel.

o Below -5°C (23°F) ... Winter type

diesel fuel.

Watch the fuel level in the tank very carefully : If the engine stops through fuel failure, the circuits must be completely purged to permit restarting.

CAUTION:

o Do not let any gasoline or water

enter the tank. This would make it necessary to drain it out and to bleed the lines to avoid jamming the injection pump and damaging the engine.

o In winter, in order to cut down

incidents due to freezing, paraffin oil may be added to the fuel if the temperature drops to below

-10°C. Never use more than 20% paraffin oil.

FEATURES OF YOUR HYUNDAI 1- 3

Biodiesel

Commercially supplied biodiesel blends of no more than 5% biodiesel, commonly known as "B5 biodiesel" may be used in your vehicle if it meets EN 14214 or equivalent specifications. (EN stands for "European Norm"). The use of biofuels made from rapeseed methyl ester (RME), fatty acid methyl ester (FAME), vegetable oil methyl ester (VME) etc. or mixing diesel with biodiesel will cause increased wear or damage to the engine and fuel system. Repair or replacement of worn or damaged components due to the use of non approved fuels will not be covered by the manufactures warranty.

CAUTION:

o Never use any fuel, whether diesel

or B5 biodiesel that fails to meet the latest petroleum industry specification.

o Never use any fuel additives or

treatments that are not recommended or approved by the vehicle manufacturer.

B010B01A-AAT

What About Gasohol?

Gasohol (a mixture of 90% unleaded gasoline and 10% ethanol or grain alcohol) may be used in your Hyundai. However, if your engine develops driveability problems, the use of 100% unleaded gasoline is recommended. Fuels with unspecified quantities of alcohol, or alcohols other than ethanol, should not be used.

B010D01S-AAT

Do not Use Methanol

Fuels containing methanol (wood alcohol) should not be used in your Hyundai. This type of fuel can reduce vehicle performance and damage components of the fuel system.

CAUTION:

Your Hyundai's New Vehicle Limited Warranty may not cover damage to the fuel system and performance problems that are caused by the use of methanol or fuels containing methanol.

B010E01A-AAT

Gasolines for Cleaner Air

To help contribute to cleaner air, Hyundai recommends that you use gasolines treated with detergent additives, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and the Emission Control System performance.

B010F01A-AAT

Operation in Foreign Countries

If you are going to drive your Hyundai in another country, be sure to:

o Observe all regulations regarding

registration and insurance.

o Determine that acceptable fuel is

available.

1- 4 FEATURES OF YOUR HYUNDAI

B020A01S-GAT

BREAKING IN YOUR NEW HYUNDAI During the First 2,000 Km (1,200 Miles) (Gasoline Engine)

No formal "break-in" procedure is required with your new Hyundai. However, you can contribute to the economical operation and durability of your Hyundai by observing the following recommendations during the first 2,000 km (1,200 miles).

o Don't drive faster than 88 km/h (55

mph).

o While driving, keep your engine

speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.

o Use moderate acceleration. Don't

start, depress the accelerator pedal fully.

o For the first 300 km (200 miles), try

to avoid hard stops.

o Don't lug the engine (in other words,

don't drive so slowly in toohigh a gear that the engine "bucks": shift to a lower gear).

o Whether going fast or slow, vary your

speed from time to time.

o Don't let the engine idle longer than 3

minutes at one time.

o Don't tow a trailer during the first

2,000 km (1,200 miles) of operation.

B020B01FC-GAT

BREAKING IN YOUR NEW HYUNDAI During the First 1,000 Km (600 Miles) (Diesel Engine)

o While driving, keep your engine

speed (rpm, or revolutions per minute) within 3,000 rpm.

o While driving, keep under three quar-

ters of maximum speed.

o Use moderate acceleration. Don't

start, depress the accelerator pedal fully.

o For the first 300 km (200 miles), try

to avoid hard stops.

o Don't lug the engine (in other words,

don't drive so slowly in too-high a gear that the engine "bucks": shift to a lower gear).

o Whether going fast or slow, vary your

speed from time to time.

o Don't let the engine idle longer than

3 minutes at one time.

o Don't tow a trailer during the first

1,000 km (600 miles) of operation.

B030A01A-AAT

KEYS

B030A01E

For greater convenience, the same key operates all the locks in your Hyundai. However, because the doors can be locked without a key, carrying a spare key is recommended in case you accidentally lock one key inside the car.

FEATURES OF YOUR HYUNDAI 1- 5

B030B01A-AAT

Record Your Key Number

B030B01E

A code number is stamped on the number plate that came with the keys to your Hyundai. This key number plate should not be left with the keys but kept in a safe place, not in the vehicle. The key number should also be recorded in a place where it can be found in an emergency.

If you need additional keys, or if you should lose your keys, your authorized Hyundai dealer can make new keys if you can supply the key number.

B880A01A-GAT

IMMOBILIZER SYSTEM (If Installed)

The immobilizer system is an anti-theft device, designed to deter automobile theft.

B880B06A-AAT

Keys

OTB028002

All of the locks fitted to the vehicle are operated by the same key. However, since it is possible to lock the doors without the use of the key, care should be exercised to ensure that the key does not become locked inside the vehicle by mistake.

NOTE:

If you make your own duplicate key, you will not be able to cancel the system or start the engine.

WARNING:

In order to prevent theft of your vehicle, do not leave spare keys anywhere in your vehicle. Your immobilizer password is a customer unique password and should be kept confidential. Do not leave this number anywhere in your vehicle.

CAUTION:

o When starting the engine, do not

use the key with other immobilizer keys in close proximity. Otherwise, the engine may not start or may stop soon after it starts. Keep each keys separately not to have any malfunction after you receive your new vehicle.

o Do not put metal accessories near

the key or ignition switch. The engine may not start for the metal accessories may interrupt the transponder signal from normally transmitting.

1- 6 FEATURES OF YOUR HYUNDAI

B880C02A-GAT

Key Numbers

OTB028003

The vehicle key number is recorded upon a metal tag attached to the keys when the vehicle is first delivered to you. The key number should be recorded and kept in a safe place in case the need to order further keys arises. New keys are available from any Hyundai dealer by quoting the relevant key number. In the interest of security, the metal tag attached to the keys which bears the key number should be removed from the key ring after you receive your new vehicle. In addition, key numbers cannot be provided by Hyundai for security reasons.

If you need additional keys or if you should lose your keys, your authorized Hyundai dealer can make new keys.

B880D02A-GAT

Limp home procedures

HNF2011

In case the immobilizer warning indicator blinks for five seconds when the ignition key is turned to "ON" position, this indicates that the immobilizer system is out of order. And you cannot start the engine without the limp home procedures with ignition key. The following procedure is how to start the engine with the function of the limp home. (0, 1, 2, 3 as a sample password).

NOTE:

You can get the limp home password when the vehicle is first delivered to you. If you do not have the password, consult your authorized Hyundai dealer.

1. To set the password you may turn the ignition key "ON" and then turn it "OFF" according to the digit numbers, then the immobilizer indicator will blink along with the operation of the ignition key. For example, turn the ignition key once for digit number "1", and twice for "2", and so on. However, for the digit number "0", you must turn the ignition key for 10 times.

2. Wait for 3~10 seconds.

3. You may set the remaining number of digits by following the same procedures 1 and 2.

4. If all of four digits have been tried successfully, turn the ignition key "ON" and check that the immobilizer indicator illuminates. From this time, you have to start your engine within 30 seconds. If you start your engine after 30 seconds, your engine will not start.

FEATURES OF YOUR HYUNDAI 1- 7

NOTE:

If the engine dies while driving after limp home procedure, you can start your engine within 8 seconds without limp home procedure again.

5. If the immobilizer indicator blinks for five seconds, you have to try the limp home procedure again from the beginning.

After doing the limp home procedure, you have to consult with your authorized Hyundai dealer as soon as possible.

CAUTION:

o If you fail to try the limp home

procedure with the sequence of three times, you have to wait for about one hour to do the limp home procedure again.

o If you cannot start your engine in

spite of limp home procedure, have your vehicle towed by an authorized Hyundai dealer.

B040A02Y-AAT

DOOR LOCKS

WARNING:

o Unlocked doors can be danger-

ous. Before you drive away (especially if there are children in the car), be sure that all the doors are securely closed and locked so that the doors cannot be inadvertently opened from the inside. This helps ensure that doors will not be opened accidentally. Also, when combined with the proper use of seat belts, locking the doors helps keep occupants from being ejected from the car in case of an accident.

o Before opening the door, always

look for and avoid oncoming traffic.

o In case of accident, the door is

unlocked automatically (If Installed).

B040B01A-AAT

Locking and Unlocking Front Doors With a Key

UNLOCK

LOCK

HTB056

o The door can be locked or unlocked

with a key.

o Lock the door by turning the key

toward the front of the vehicle and unlock it by turning the key toward the rear.

1- 8 FEATURES OF YOUR HYUNDAI

B040C01FC-GAT

Locking From the Outside

HTB062

The doors can be locked without a key. To lock the doors from the outside, first push the inside lock switch to the "LOCK" position, so that the red mark on the switch is not visible, then close the door. The door will not lock if the key is left in the ignition switch when the front doors close. This is normal operation. (If installed)

NOTE:

o When locking the door this way,

be careful not to lock the door with the ignition key left in the vehicle.

o To protect against theft, always

remove the ignition key, close all windows, and lock all doors and tail gate when leaving your vehicle unattended.

B040D01FC-GAT

Locking From the Inside

LOCK

UNLOCK

HTB057

To lock the doors from the inside, simply close the door and push the lock switch to the "LOCK" position. When this is done, neither the outside nor the inside door handle can be used.

NOTE:

When the door is locked, the red mark on the switch is not visible and the character "LOCK" on the switch is visible.

B040E04A-AAT

CHILD-PROTECTOR REAR DOOR LOCK (5door only)

HTB058

Your Hyundai is equipped with a "childprotector" rear door lock assembly. When the lock mechanism is engaged, the rear door cannot be opened from the inside. It's use is recommended whenever there are small children in the rear seat.

FEATURES OF YOUR HYUNDAI 1- 9

To engage the child-protector feature so that the door cannot be opened from the inside, move the child-protector lever to the "

door. Move the lever to the "

" position and close the

" posi-

tion when normal door operation is desired.

If you wish to be able to open the door from the outside, the outside door handle will function normally.

B040G02FC-GAT

Central Door Lock (If Installed)

HTB212

The central door locking is operated by pushing the driver's door lock switch toward the front or rear of the vehicle. If the passenger and rear doors are open when the switch is pushed, the door will remain locked when closed.

NOTE:

o When pushing the switch toward

the rear, all doors and tail gate will unlock. When pushing the switch toward the front, all doors and tail gate will lock.

o When the door is unlocked, the

red mark on the switch is visible and the character "LOCK" on the switch is visible.

o The central door locking is oper-

ated by turning the key (with theftalarm system: driver's door and passenger's door, without theftalarm system: driver's door only) toward the front or rear of the vehicle.

o If the door is locked/unlocked mul-

tiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components.

B070A01A-AAT

THEFT-ALARM SYSTEM (If Installed)

This system is designed to provide protection from unauthorized entry into the car. This system is operated in three stages: the first is the "Armed" stage, the second is the "Alarm" stage, and the third is the "Disarmed" stage. If triggered, the system provides an audible alarm with blinking of the turn signal lights.

B070B01O-GAT

Armed Stage

B070B01TB

1- 10 FEATURES OF YOUR HYUNDAI

Park the car and stop the engine. Arm the system as described below.

1) Remove the ignition key from the ignition switch.

2) Make sure that the engine hood and tail gate are locked.

3) Lock the doors using the transmitter of the keyless entry system.

After completion of the steps above, the turn signal lights will blink once to indicate that the system is armed.

NOTE:

1) If any door, tail gate or engine hood remains open, the system will not be armed.

2) If this happens, rearm the system as described above.

CAUTION:

Do not arm the system until all passengers have left the car. If the system is armed while a passenger(s) remains in the car, the alarm may be activated when the remaining passenger(s) leaves the car.

B070C01FC-GAT

Alarm Stage

The alarm will be activated if any of the following occurs while the car is parked and the system is armed.

1) A front or rear door is opened without using the transmitter.

2) The tail gate is opened without using the transmitter.

3) The engine hood is opened.

The alarming horn will sound and the turn signal light will blink continuously for 27 seconds (E.C only/ Except E.C 3 times). To turn off the system, unlock the door or tail gate with the transmitter.

B070D01TB-AAT

Disarmed Stage

HTB202

The system will be disarmed when the driver's or passenger's door is unlocked by depressing the button on the transmitter.

After completion of the step above, the turn signal lights will blink twice to indicate that the system is disarmed.

NOTE:

Once the system has been disarmed, it can not be rearmed except by repeating the arming procedures.

FEATURES OF YOUR HYUNDAI 1- 11

CAUTION:

Only the transmitter can disarm the armed stage. If the transmitter does not disarm the system, it is necessary to take the following steps;

1. Unlock the door with the key, which will cause, the alarm to be activated.

2. Insert the key in the ignition key cylinder and turn the ignition key to "ON" position.

3. Wait for 30 seconds.

After completing the steps above, the system will be disarmed.

B070F02TB-GAT

Keyless Entry System (If Installed) Locking doors

1. Close all doors.

2. Push the button on the transmitter.

3. At the same time all doors lock, the turn signal lights will blink once to indicate that the system is armed.

Unlocking doors

1. Push the button on the transmitter.

2. At the same time all doors unlock, the turn signal light will blink twice to indicate that the system is disarmed.

NOTE:

The transmitter will not work if any of following occur:

- The ignition key is in ignition

switch.

- You exceed the operating distance

limit (10 m).

- The battery in the transmitter is

weak.

- Other vehicles or objects may be

blocking the signal.

- The weather is extremely cold.

- The transmitter is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the transmitter.

When the transmitter does not work correctly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Hyundai Dealer.

NOTE:

Keep the transmitter away from water or any liquid. If the keyless entry system is inoperative due to exposure to water or liquids, it will not be covered by your manufacturer vehicle warranty.

1- 12 FEATURES OF YOUR HYUNDAI

B070E01TB-GAT

Replacing the battery

When the transmitter's battery begins to get weak, it may take several pushes on the button to lock or unlock the doors, and the LED will not light. Replace the battery as soon as possible.

Battery type : CR1220

Replacement instructions:

HTB053

1. Remove the screw with a phillips screwdriver.

2. Carefully separate the case with a flat-head screwdriver as shown in the illustration.

HTB054

3. Remove four screws back side of the built-in circuit.

Battery

HTB055

4. Remove the old battery from the case and note the polarity. Make sure the polarity of the new battery is the same (+side facing up), then insert it in the transmitter.

B050A01A-AAT

WINDOW GLASS

HTB257

To raise or lower the window, turn the window regulator handle clockwise or counterclockwise.

WARNING:

When opening or closing the windows, make sure your passenger's arms, hands and body are safely out of the way.

B060A01E-AAT

POWER WINDOWS (If Installed)

(1)

HTB064

The power windows operate when the ignition key is in the "ON" position. The main switches are located on the driver's armrest and control the front and rear windows on both sides of the vehicle. The windows may be opened by depressing the appropriate window switch and closed by pulling up the switch. To open the window on the driver's side, press the switch(1) down. The window moves as long as the switch is operated.

HTB066

In order to prevent operation of the passenger front and rear windows, a window lock switch is provided on the armrest of the driver's door. To disable the power windows, press the window lock switch. To revert to normal operation, press the window lock switch a second time.

Auto-Down Window (Driver's Side)

The Auto-Down window is moved to its fully open position by pushing the switch. To stop at the desired position push the switch again.

FEATURES OF YOUR HYUNDAI 1- 13

WARNING:

1) Be careful that someone's head, hands and body are not trapped by a closing window.

2) Never try to operate the main switch on the driver's door and the individual door window switch in opposing directions at the same time. If this is done, the window will stop and cannot be opened or closed.

3) Do not leave children alone in the car. Always remove the ignition key for their safety.

B080A01A-GAT

ADJUSTABLE FRONT SEATS

WARNING:

Never attempt to adjust the seat while the vehicle is moving. This could result in loss of control, or an accident which may cause death, serious injury, or property damage.

1- 14 FEATURES OF YOUR HYUNDAI

B080B02A-GAT

FRONT SEATS Adjusting Seat Forward and Rearward

HTB024

To move the seat toward the front or rear, pull the lock release lever upward. This will release the seat on its track so you can move it forward or rearward to the desired position. When you find the position you want, release the lever and slide the seat forward or rearward on its track until it locks into the desired position and cannot be moved further.

WARNING:

To ensure the seat is locked securely, attempt to move the seat forward or rearward without using the lock release lever.

B080C01A-AAT

Adjusting Seatback Angle

HTB026

To recline the seatback, lean forward to take your weight off it, then pull up on the recliner control lever at the outside edge of the seat. Now lean back until the desired seatback angle is achieved. To lock the seatback into position, release the recliner control lever.

WARNING:

To minimize risk of severe injury in the event of a collision or a sudden stop, both the driver and passenger seatbacks should always be in an upright position while the vehicle is in motion. The protection provided by the seat belts and airbags may be reduced significantly when the seatbacks are reclined. There is greater risk that the driver and passenger will slide under the seat belt which may result in serious injury if a crash occurs when the seatbacks are reclined. The seat belt cannot provide full protection to an occupant if the seat back is reclined.

FEATURES OF YOUR HYUNDAI 1- 15

B080D03JM-AAT

Adjustable Headrests

Lock knob

HFC2028

Headrests are designed to help reduce the risk of neck injuries. To raise the headrest, pull it up. To lower the headrest, push it down while pressing the lock knob. To remove the headrest, raise it as far as it can go then press the lock knob while pulling upward. This should only be done when the seat is not occupied.

WARNING:

B080D01JM

o For maximum effectiveness in case

of an accident, the headrest should be adjusted so the middle of the headrest is at the same height of the center of gravity of an occupant's head. Generally, the center of gravity of most people's head is similar with the height of the top of their eyes. Also, adjust the headrest as close to your head as possible. For this reason, the use of a cushion that holds the body away from the seatback is not recommended.

o Do not operate the vehicle with the

headrests removed as severe injury to an occupant may occur in the event of an accident. Headrests may provide protection against severe neck injuries when properly adjusted.

o Do not adjust the headrest posi-

tion of the driver’s seat while the vehicle is in motion.

B083D01NF-AAT

Active Headrests (If Installed)

HNF2041-1

The active headrest is designed to move forward and upward during a rear impact. This helps to prevent the driver's and front passenger's head from moving backward and thus helps prevent neck injuries.

1- 16 FEATURES OF YOUR HYUNDAI

B080E01O-AAT

Lumbar Support Control (Driver's Seat Only) (If Installed)

HTB027

To adjust the lumbar support, turn the handle on the outboard or left side of the seat. To increase the amount of lumbar support, pull the lever forward. To decrease it, push the lever toward the rear.

B080F01S-AAT

Seat Cushion Height Adjustment (Driver's Seat Only) (If Installed)

HTB025

To raise or lower the front part of the seat cushion, turn the front knob forward or rearward. To raise or lower the rear part of the seat cushion, turn the rear knob forward or rearward.

B080G01A-GAT

Adjusting Armrest Angle (Driver's side only) (If installed)

HTB2049

The armrest will be raised or lowered manually. To raise the armrest, pull it up. To lower it, press the armrest down.

FEATURES OF YOUR HYUNDAI 1- 17

B130A01A-AAT

REAR SEAT ENTRY (For 3-door model)

(1)

(2)

HTB258

The front passenger seatback should be tilted to enter the rear seat. By pulling up on the recliner control lever (1) at the outside of the front passenger seat, the seatback will tilt forward and the seat will automatically slide forward. Rear seat occupants can tilt the front passenger seatback by depressing the foot lever (2) as shown in the illustration.

WARNING:

Passengers sitting in the rear seat should be careful not to accidentally press the foot lever (2) while the vehicle is moving, as this may cause the seatback to move forward and injure a front seat occupant.

B080I01FC-GAT

REAR SEAT Adjusting Seatback Angle

Seatback folding lever

B080I01TB

To recline the seatback, push the seatback folding lever toward the headrest, and release it after the desired seatback angle is achieved. When you recline the seatback to desired position, always be sure it has locked into position.

CAUTION:

When reclining the seatback you should adjust the seatback folding lever while standing.

1- 18 FEATURES OF YOUR HYUNDAI

B099A02F-AAT

BEFORE FOLDING THE REAR SEATS

Outboard Rear Seat Belt

HTB294

Rear Seat Center's 3 Point Type Seat Belt (If installed)

In order to prevent the shoulder belt from being damaged while folding the rear seat, the shoulder belt must be passed through the hanger to keep it out of the way.

CAUTION:

Seat belts must be removed from the hanger when in use.

B090B01TB-GAT

Folding Rear Seatback and Seat Cushion

For greater convenience, the entire seatback and seat cushion may be folded down and up.

Seatback folding lever

1. Push the headrest down to the lowest position.

2. To fold down the seatback , push and hold the seatback folding lever toward the headrest, then push down the seatback.

HTB2006

OTB038146

+ 224 hidden pages