This Owner's Manual should be considered a part of the car and remain with it when it is sold for the use of the
next owner.
OWNER'S I.D.
ORIGINAL:
ADDRESS:
DATE OF SALE:
SUBSEQUENT:
ADDRESS:
TRANSFER DATE:
NAME:
STREET:
TOWN:
COUNTRY:
P.CODE:
NAME:
STREET:
TOWN:
COUNTRY:
P.CODE:
OWNER'S MANUAL
A030A01TB-GAT
Operation
Maintenance
Specifications
A030A01TB
All information in the Owner's Manual is current at the time of publication. Hyundai reserves the right to make
changes at any time as part of our policy of continual product improvement may be carried out.
This manual applies to all Hyundai models and includes descriptions and explanations of optional as
well as standard equipment. As a result, you may find material in this manual that does not apply to your
specific vehicle.
Please note that some models are equipped with Right-Hand Drive (RHD). The explanations and illustrations for
some operations in RHD models are opposite of those written in this manual.
A040A01A-AAT
FOREWORD
Thank you for choosing Hyundai. We are pleased to welcome you to the growing number of
discriminating people who drive Hyundais. The advanced engineering and high-quality construction of each Hyundai we build is something of which we're very proud.
Your Owner's Manual will introduce you to the features and operation of your new Hyundai. It is
suggested that you read it carefully since the information it contains can contribute greatly to the
satisfaction you receive from your new car.
The manufacturer also recommends that all service and maintenance on your car be performed
by an authorized Hyundai dealer. Hyundai dealers are prepared to provide high-quality service,
maintenance and any other assistance that may be required.
A050A04A-AAT
HYUNDAI MOTOR COMPANY
Note: Because future owners will also need the information included in this manual, if you sell this
Hyundai, please leave the manual in the vehicle for their use. Thank you.
!
CAUTION:
Severe engine and transaxle damage may result from the use of poor quality fuels and
lubricants that do not meet Hyundai specifications. You must always use high quality fuels
and lubricants that meet the specifications listed on Page 9-4 in the Vehicle Specifications
section of the Owner's Manual.
Copyright 2006 Hyundai Motor Company. All rights reserved. No part of this publication may be
reproduced, stored in any retrieval system or transmitted in any form or by any means without the
prior written permission of Hyundai Motor Company.
A020A01A-AAT
RESPONSIBILITY FOR MAINTENANCE
The maintenance requirements for your new Hyundai are found in Section 5. As the
owner, it is your responsibility to see that all maintenance operations specified by the
manufacturer are carried out at the appropriate intervals. When the vehicle is used
in severe driving conditions, more frequent maintenance is required for some
operations. Maintenance requirements for severe operating conditions are also
included in Section 5.
A070A01A-GAT
Modification of components may void the manufacturer's warranty
Your Hyundai should not be modified in any way. Modifications may adversely affect
the safety, durability and performance of your Hyundai. Components which are
subjected to modification or are added to the vehicle resulting in consequential
damage are not covered by the vehicle manufacturer's warranty.
!
CAUTION: MODIFICATIONS TO YOUR HYUNDAI
A080A01S-AAT
TWO-WAY RADIO OR CELLULAR TELEPHONE INSTALLATION
Your vehicle is equipped with electronic fuel injection and other electronic components. It is possible for an improperly installed/adjusted two-way radio or cellular
telephone to adversely affect electronic systems. For this reason, we recommend
that you carefully follow the radio manufacturer's instructions or consult your Hyundai
dealer for precautionary measures or special instructions if you choose to install one
of these devices.
A090A01A-AAT
SAFETY AND VEHICLE DAMAGE WARNING
This manual includes information titled as WARNING, CAUTION and NOTE.
These titles indicate the following:
!
WARNING:
This indicates that a condition may result in harm, serious injury or death to
you or other persons if the warning is not heeded. Follow the advice provided
with the warning.
!
CAUTION:
This indicates that a condition may result in damage to your vehicle or its
equipment if the caution is not heeded. Follow the advice provided with the
caution.
NOTE:
This indicates that interesting or helpful information is being provided.
A100A01L-GAT
GUIDE TO HYUNDAI GENUINE
PARTS
1.What are Hyundai Genuine Parts?
Hyundai Genuine Parts are the same
parts used by Hyundai Motor Company to manufacture vehicles. They
are designed and tested for the
optimum safety, performance, and
reliability to our customers.
2. Why should you use genuine parts?
Hyundai Genuine Parts are engineered and built to meet rigid original manufacturing requirements.
Using imitation, counterfeit or used
salvage parts are not covered under
the Hyundai New Vehicle Limited
Warranty or any other Hyundai warranty. In addition, any damage to or
failure of Genuine Hyundai Parts
caused by the installation or failure
of an imitation, counterfeit or used
salvage part is not covered by
Hyundai Motor Company.
3. How can you tell if you purchasing
Hyundai Genuine Parts?
Look for the Hyundai Genuine Parts
Logo on the package (see below).
The export specifications are written in English only.
Hyundai Genuine Parts are only
sold through authorized Hyundai
Dealership and Service Center.
A100A03L
A100A01L
A100A02LA100A04L
TABLE OF CONTENTS
SECTIONPAGE
1. FEATURES OF YOUR HYUNDAI ....................................................................... 1-1
2. DRIVING YOUR HYUNDAI .................................................................................. 2-1
3. WHAT TO DO IN AN EMERGENCY ................................................................... 3-1
4. CORROSION PREVENTION & APPEARANCE CARE ...................................... 4-1
10. INDEX ................................................................................................................ 10-1
1
2
3
4
5
6
7
8
9
10
YOUR VEHICLE AT A GLANCE
B250A01TB-GAT
INSTRUMENTS AND CONTROLS (LEFT-HAND DRIVE)
B250A01TB
YOUR VEHICLE AT A GLANCE
1. Headlight Leveling Switch (If installed)
2. Front Fog Light Switch (If installed)
3. Multi-Function Light Switch
4. Instrument Cluster
5. Horn and Driver's Airbag (If installed)
6. Windshield Wiper/Washer Switch
7. Digital Clock
8. Hazard Warning Light
9. Audio System (If installed)
10.Passenger's Airbag (If installed)
11.Glove Box
!
CAUTION:
When installing a container of liquid air freshener inside a vehicle, do not place it near the instrument cluster nor
on the instrument panel pad surface. If there is any leakage from the air freshener onto these areas (instrument
cluster, instrument panel pad or air ventilator), it may damage these parts.If the liquid from the air freshener does
leak onto these areas, wash them with water immediately.
12.Hood Release Lever
13.Fuse Box
14.Audio Remote Control Switch (If installed)
15.Heating/Air Conditioning Control Panel
(If installed)
16.Cigarette Lighter
17.Ashtray
18.Front Drink Holder
19.Shift Lever (If installed)
20.Parking Brake Lever
21.Rear Drink Holder
YOUR VEHICLE AT A GLANCE
B250B01TB-GAT
INSTRUMENTS AND CONTROLS (RIGHT-HAND DRIVE)
B250B01TB
YOUR VEHICLE AT A GLANCE
1. Glove Box
2. Passenger's Airbag (If installed)
3. Audio System (If installed)
4. Hazard Warning Light
5. Digital Clock
6. Windshield Wiper/Washer Switch
7. Horn and Driver's Airbag (If installed)
8. Instrument Cluster
9. Multi-Function Light Switch
10. Headlight Leveling Switch (If installed)
11. Rear Drink Holder
!
CAUTION:
When installing a container of liquid air freshener inside a vehicle, do not place it near the instrument cluster nor
on the instrument panel pad surface. If there is any leakage from the air freshener onto these areas (instrument
cluster, instrument panel pad or air ventilator), it may damage these parts. If the liquid from the air freshener does
leak onto these areas, wash them with water immediately.
12. Parking Brake Lever
13. Shift Lever (If installed)
14. Front Drink Holder
15. Ashtray
16. Power Outlet (If installed)
17. Heating/Air Conditioning Control Panel
(If installed)
18. Audio Remote Control Switch (If installed)
19. Fuse Box
20. Hood Release Lever
YOUR VEHICLE AT A GLANCE
B255A01TB-GAT
INDICATOR SYMBOLS ON THE INSTRUMENT PANEL
SRS (Airbag) Service Reminder
Indicator
Passenger's Front Airbag OFF
Indicator Light (If Installed)
Door Ajar Warning Light and Chime
Low Fuel Level Warning Light
ABS Service Reminder Indicator
O/D OFF Indicator
(Automatic transaxle only)
Turn Signal Indicator Lights
High Beam Indicator Light
Low Oil Pressure Warning Light
Parking Brake/Brake Fluid Level
Warning Light
Charging System Warning Light
Tail Gate Open Warning Light
* A detail explanations of these items will be found on page 1-50
Malfunction Indicator Light
Seat Belt Warning Light
Electric Power Steering System (EPS)
Warning Light
Electronic Stability Program Indicator
Lights (If Installed)
Except E.C – Unleaded gasoline with
Octane rating 87(Research Octane
Number 91) or higher must be used.
E.C only – Unleaded gasoline with
Octane rating 87(Research Octane Number 91) or higher must be used. For
improved vehicle performance, premium
unleaded gasoline with an Octane rating 91(RON 95) or higher is recommended.
If leaded gasoline is used, it will cause
the catalytic converter to become ineffective and the emission control system to malfunction. This can also result
in increased maintenance expense.
To avoid accidental use of leaded fuel,
the large nozzle used with leaded gasoline at service stations can not be
inserted into fuel tank opening of Hyundai
vehicle.
NOTE:
o For some countries, Hyundai ve-
hicles are designed to use leaded
gasoline. When you are going to
use leaded gasoline, ask to
Hyundai dealer whether leaded
gasoline in your vehicle is available or not.
o Octane Rating of leaded gaso-
line is same with unleaded one.
Use Diesel
Diesel fuel of 52 to 54 cetane is used in
Hyundai vehicle. If two types of diesel
fuel are available, use summer or winter fuel properly according to the following temperature conditions.
o Above -5°C (23°F) ... Summer type
diesel fuel.
o Below -5°C (23°F) ... Winter type
diesel fuel.
Watch the fuel level in the tank very
carefully : If the engine stops through
fuel failure, the circuits must be completely purged to permit restarting.
!
CAUTION:
o Do not let any gasoline or water
enter the tank. This would make
it necessary to drain it out and to
bleed the lines to avoid jamming
the injection pump and damaging the engine.
o In winter, in order to cut down
incidents due to freezing, paraffin oil may be added to the fuel if
the temperature drops to below 10°C. Never use more than 20%
paraffin oil.
B010B01A-AAT
What About Gasohol?
Gasohol (a mixture of 90% unleaded
gasoline and 10% ethanol or grain
alcohol) may be used in your Hyundai.
However, if your engine develops
driveability problems, the use of 100%
unleaded gasoline is recommended.
Fuels with unspecified quantities of
alcohol, or alcohols other than ethanol,
should not be used.
FEATURES OF YOUR HYUNDAI1- 3
B010D01S-AAT
Do not Use Methanol
Fuels containing methanol (wood alcohol) should not be used in your
Hyundai. This type of fuel can reduce
vehicle performance and damage components of the fuel system.
!
CAUTION:
Your Hyundai's New Vehicle Limited Warranty may not cover damage to the fuel system and performance problems that are caused by
the use of methanol or fuels containing methanol.
B010E01A-AAT
Gasolines for Cleaner Air
To help contribute to cleaner air,
Hyundai recommends that you use
gasolines treated with detergent additives, which help prevent deposit formation in the engine. These gasolines
will help the engine run cleaner and the
Emission Control System performance.
B010F01A-AAT
Operation in Foreign Countries
If you are going to drive your Hyundai
in another country, be sure to:
o Observe all regulations regarding
registration and insurance.
o Determine that acceptable fuel is
available.
B020A01S-GAT
BREAKING IN YOUR NEW
HYUNDAI
During the First 2,000 Km (1,200
Miles)
(Gasoline Engine)
No formal "break-in" procedure is required with your new Hyundai. However, you can contribute to the economical operation and durability of your
Hyundai by observing the following
recommendations during the first 2,000
km (1,200 miles).
o Don't drive faster than 88 km/h (55
mph).
o While driving, keep your engine
speed (rpm, or revolutions per
minute) between 2,000 rpm and
4,000 rpm.
o Use moderate acceleration. Don't
start, depress the accelerator pedal
fully.
o For the first 300 km (200 miles), try
to avoid hard stops.
o Don't lug the engine (in other words,
don't drive so slowly in toohigh a
gear that the engine "bucks": shift to
a lower gear).
o Whether going fast or slow, vary
your speed from time to time.
o Don't let the engine idle longer than
3 minutes at one time.
o Don't tow a trailer during the first
2,000 km (1,200 miles) of operation.
1- 4FEATURES OF YOUR HYUNDAI
B020B01FC-GAT
BREAKING IN YOUR NEW
HYUNDAI
During the First 1,000 Km (600
Miles)
(Diesel Engine)
No formal "break-in" procedure is required with your new Hyundai. However, you can contribute to the economical operation and durability of your
Hyundai by observing the following
recommendations during the first 1,000
km (600 miles).
o While driving, keep your engine
speed (rpm, or revolutions per
minute) within 3,000 rpm.
o While driving, keep under three quar-
ters of maximum speed.
o Use moderate acceleration. Don't
start, depress the accelerator pedal
fully.
o For the first 300 km (200 miles), try
to avoid hard stops.
o Don't lug the engine (in other words,
don't drive so slowly in too-high a
gear that the engine "bucks": shift to
a lower gear).
o Whether going fast or slow, vary your
speed from time to time.
o Don't let the engine idle longer than
3 minutes at one time.
o Don't tow a trailer during the first
1,000 km (600 miles) of operation.
B030A01A-AAT
KEYS
B030A01E
For greater convenience, the same key
operates all the locks in your Hyundai.
However, because the doors can be
locked without a key, carrying a spare
key is recommended in case you accidentally lock one key inside the car.
B030B01A-AAT
Record Your Key Number
B030B01E
A code number is stamped on the
number plate that came with the keys
to your Hyundai. This key number
plate should not be left with the keys
but kept in a safe place, not in the
vehicle. The key number should also
be recorded in a place where it can be
found in an emergency.
If you need additional keys, or if you
should lose your keys, your authorized
Hyundai dealer can make new keys if
you can supply the key number.
FEATURES OF YOUR HYUNDAI1- 5
B880A01A-GAT
IMMOBILIZER SYSTEM
(If Installed)
The immobilizer system is an anti-theft
device, designed to deter automobile
theft.
B880B05A-AAT
Keys
AX10020A-1
All of the locks fitted to the vehicle are
operated by the same key. However,
since it is possible to lock the doors
without the use of the key, care should
be exercised to ensure that the key
does not become locked inside the
vehicle by mistake.
NOTE:
If you make your own duplicate key,
you will not be able to cancel the
system or start the engine.
!
CAUTION:
When starting the engine, do not use
the key with other immobilizer keys
in close proximity. Otherwise, the
engine may not start or may stop
soon after it starts.
Keep each key seperated from one
another.
B880C02A-GAT
Key Numbers
AX10030A-1
The vehicle key number is recorded
upon a metal tag attached to the keys
when the vehicle is first delivered to
you.
The key number should be recorded
and kept in a safe place in case the
need to order further keys arises. New
keys are available from any Hyundai
dealer by quoting the relevant key number.
In the interest of security, the metal tag
attached to the keys which bears the
key number should be removed from
the key ring after you receive your new
vehicle. In addition, key numbers cannot be provided by Hyundai for security
reasons.
If you need additional keys or if you
should lose your keys, your authorized
Hyundai dealer can make new keys.
1- 6FEATURES OF YOUR HYUNDAI
B880D02A-GAT
Limp home procedures
HNF2011
In case the immobilizer warning indicator blinks for five seconds when the
ignition key is turned to "ON" position,
this indicates that the immobilizer system is out of order. And you cannot
start the engine without the limp home
procedures with ignition key.
The following procedure is how to start
the engine with the function of the limp
home. (0, 1, 2, 3 as a sample password).
NOTE:
You can get the limp home password when the vehicle is first delivered to you. If you do not have the
password, consult your authorized
Hyundai dealer.
1. To set the password you may turn
the ignition key "ON" and then turn
it "OFF" according to the digit numbers, then the immobilizer indicator
will blink along with the operation of
the ignition key. For example, turn
the ignition key once for digit number "1", and twice for "2", and so on.
However, for the digit number "0",
you must turn the ignition key for 10
times.
2. Wait for 3~10 seconds.
3. You may set the remaining number
of digits by following the same procedures 1 and 2.
4. If all of four digits have been tried
successfully, turn the ignition key
"ON" and check that the immobilizer indicator illuminates. From this
time, you have to start your engine
within 30 seconds. If you start your
engine after 30 seconds, your engine will not start.
NOTE:
If the engine dies while driving after
limp home procedure, you can start
your engine within 8 seconds without limp home procedure again.
5. If the immobilizer indicator blinks for
five seconds, you have to try the
limp home procedure again from
the beginning.
After doing the limp home procedure,
you have to consult with your authorized Hyundai dealer as soon as possible.
!
CAUTION:
o If you fail to try the limp home
procedure with the sequence of
three times, you have to wait for
about one hour to do the limp
home procedure again.
o If you cannot start your engine in
spite of limp home procedure,
have your vehicle towed by an
authorized Hyundai dealer.
FEATURES OF YOUR HYUNDAI1- 7
B040A02Y-AAT
DOOR LOCKS
!
WARNING:
o Unlocked doors can be danger-
ous. Before you drive away (especially if there are children in
the car), be sure that all the doors
are securely closed and locked
so that the doors cannot be inadvertently opened from the inside.
This helps ensure that doors will
not be opened accidentally. Also,
when combined with the proper
use of seat belts, locking the
doors helps keep occupants from
being ejected from the car in case
of an accident.
o Before opening the door, always
look for and avoid oncoming traffic.
o In case of accident, the door is
unlocked automatically (If Installed).
B040B01A-AAT
Locking and Unlocking Front
Doors With a Key
UNLOCK
LOCK
HTB056
o The door can be locked or unlocked
with a key.
o Lock the door by turning the key
toward the front of the vehicle and
unlock it by turning the key toward
the rear.
B040C01FC-GAT
Locking From the Outside
HTB062
The doors can be locked without a key.
To lock the doors from the outside, first
push the inside lock switch to the
"LOCK" position, so that the red mark
on the switch is not visible, then close
the door.
The door will not lock if the key is left in
the ignition switch when the front doors
close. This is normal operation. (If installed)
NOTE:
o When locking the door this way,
be careful not to lock the door
with the ignition key left in the
vehicle.
1- 8 FEATURES OF YOUR HYUNDAI
o To protect against theft, always
remove the ignition key, close all
windows, and lock all doors and
tail gate when leaving your vehicle unattended.
B040D01FC-GAT
Locking From the Inside
LOCK
UNLOCK
HTB057
To lock the doors from the inside, simply close the door and push the lock
switch to the "LOCK" position. When
this is done, neither the outside nor the
inside door handle can be used.
NOTE:
When the door is locked, the red
mark on the switch is not visible and
the character "LOCK" on the switch
is visible.
B040E04A-AAT
CHILD-PROTECTOR
REAR DOOR LOCK
HTB058
Your Hyundai is equipped with a "childprotector" rear door lock assembly.
When the lock mechanism is engaged,
the rear door cannot be opened from
the inside. It's use is recommended
whenever there are small children in
the rear seat.
To engage the child-protector feature
so that the door cannot be opened from
the inside, move the child-protector
lever to the "
door. Move the lever to the "
" position and close the
" posi-
tion when normal door operation is desired.
If you wish to be able to open the door
from the outside, the outside door
handle will function normally.
B040G02FC-GAT
Central Door Lock (If Installed)
HTB212
FEATURES OF YOUR HYUNDAI1- 9
The central door locking is operated by
pushing the driver's door lock switch
toward the front or rear of the vehicle.
If the passenger and rear doors are
open when the switch is pushed, the
door will remain locked when closed.
NOTE:
o When pushing the switch toward
the rear, all doors and tail gate
will unlock.
When pushing the switch toward
the front, all doors and tail gate
will lock.
o When the door is unlocked, the
red mark on the switch is visible
and the character "LOCK" on the
switch is visible.
o The central door locking is oper-
ated by turning the key (with theftalarm system: driver's door and
passenger's door, without theftalarm system: driver's door only)
toward the front or rear of the
vehicle.
o If the door is locked/unlocked mul-
tiple times in rapid succession
with either the vehicle key or door
lock switch, the system may stop
operating temporarily in order to
protect the circuit and prevent
damage to system components.
B070A01A-AAT
THEFT-ALARM SYSTEM
(If Installed)
This system is designed to provide
protection from unauthorized entry into
the car. This system is operated in
three stages: the first is the "Armed"
stage, the second is the "Alarm" stage,
and the third is the "Disarmed" stage.
If triggered, the system provides an
audible alarm with blinking of the turn
signal lights.
B070B01O-GAT
Armed Stage
B070B01TB
Park the car and stop the engine. Arm
the system as described below.
1) Remove the ignition key from the
ignition switch.
2) Make sure that the engine hood and
tail gate are locked.
3) Lock the doors using the transmitter
of the keyless entry system.
After completion of the steps above,
the turn signal lights will blink once to
indicate that the system is armed.
NOTE:
1) If any door, tail gate or engine
hood remains open, the system
will not be armed.
2) If this happens, rearm the system
as described above.
!
CAUTION:
Do not arm the system until all
passengers have left the car. If the
system is armed while a
passenger(s) remains in the car,
the alarm may be activated when
the remaining passenger(s) leaves
the car.
1- 10 FEATURES OF YOUR HYUNDAI
B070C01FC-GAT
Alarm Stage
The alarm will be activated if any of the
following occurs while the car is parked
and the system is armed.
1) A front or rear door is opened without using the transmitter.
2) The tail gate is opened without using the transmitter.
3) The engine hood is opened.
The alarming horn will sound and the
turn signal light will blink continuously
for 27 seconds (E.C only/ Except E.C
3 times). To turn off the system, unlock
the door or tail gate with the transmitter.
B070D01TB-AAT
Disarmed Stage
HTB202
The system will be disarmed when the
driver's or passenger's door is unlocked by depressing the button on the
transmitter.
After completion of the step above, the
turn signal lights will blink twice to
indicate that the system is disarmed.
NOTE:
Once the system has been disarmed, it can not be rearmed except
by repeating the arming procedures.
!
CAUTION:
Only the transmitter can disarm the
armed stage. If the transmitter does
not disarm the system, it is necessary to take the following steps;
1. Unlock the door with the key,
which will cause, the alarm to be
activated.
2. Insert the key in the ignition key
cylinder and turn the ignition key
to "ON" position.
3. Wait for 30 seconds.
After completing the steps above,
the system will be disarmed.
FEATURES OF YOUR HYUNDAI1- 11
B070F02TB-GAT
Keyless Entry System
(If Installed)
Locking doors
1. Close all doors.
2. Push the button on the transmitter.
3. At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Unlocking doors
1. Push the button on the transmitter.
2. At the same time all doors unlock,
the turn signal light will blink twice to
indicate that the system is disarmed.
NOTE:
The transmitter will not work if any of
following occur:
- The ignition key is in ignition
switch.
- You exceed the operating distance
limit (10 m).
- The battery in the transmitter is
weak.
- Other vehicles or objects may be
blocking the signal.
- The weather is extremely cold.
- The transmitter is close to a radio
transmitter such as a radio station
or an airport which can interfere
with normal operation of the transmitter.
When the transmitter does not work
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, contact an authorized Hyundai Dealer.
NOTE:
Keep the transmitter away from water or any liquid. If the keyless entry
system is inoperative due to exposure to water or liquids, it will not be
covered by your manufacturer vehicle warranty.
B070E01TB-GAT
Replacing the battery
When the transmitter's battery begins
to get weak, it may take several pushes
on the button to lock or unlock the
doors, and the LED will not light. Replace the battery as soon as possible.
Battery type : CR1220
Replacement instructions:
HTB053
1. Remove the screw with a phillips
screwdriver.
2. Carefully separate the case with a
flat-head screwdriver as shown in
the illustration.
1- 12FEATURES OF YOUR HYUNDAI
HTB054
3. Remove four screws back side of the
built-in circuit.
Battery
HTB055
4. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same (+side facing up), then
insert it in the transmitter.
B050A01A-AAT
WINDOW GLASS
HTB257
To raise or lower the window, turn the
window regulator handle clockwise or
counterclockwise.
!
WARNING:
When opening or closing the windows, make sure your passenger's
arms, hands and body are safely
out of the way.
B060A01E-AAT
POWER WINDOWS (If Installed)
(1)
HTB064
The power windows operate when the
ignition key is in the "ON" position. The
main switches are located on the
driver's armrest and control the front
and rear windows on both sides of the
vehicle. The windows may be opened
by depressing the appropriate window
switch and closed by pulling up the
switch. To open the window on the
driver's side, press the switch(1) down.
The window moves as long as the
switch is operated.
HTB066
In order to prevent operation of the
passenger front and rear windows, a
window lock switch is provided on the
armrest of the driver's door. To disable
the power windows, press the window
lock switch.
To revert to normal operation, press
the window lock switch a second time.
Auto-Down Window
(Driver's Side)
The Auto-Down window is moved to its
fully open position by pushing the
switch. To stop at the desired position
push the switch again.
!
WARNING:
1) Be careful that someone's head,
hands and body are not trapped
by a closing window.
2) Never try to operate the main
switch on the driver's door and
the individual door window
switch in opposing directions at
the same time. If this is done, the
window will stop and cannot be
opened or closed.
3) Do not leave children alone in the
car. Always remove the ignition
key for their safety.
B080A01A-GAT
ADJUSTABLE FRONT SEATS
!
WARNING:
Never attempt to adjust the seat
while the vehicle is moving. This
could result in loss of control, or an
accident which may cause death,
serious injury, or property damage.
FEATURES OF YOUR HYUNDAI1- 13
B080B02A-GAT
FRONT SEATS
Adjusting Seat Forward and
Rearward
HTB024
To move the seat toward the front or
rear, pull the lock release lever upward. This will release the seat on its
track so you can move it forward or
rearward to the desired position. When
you find the position you want, release
the lever and slide the seat forward or
rearward on its track until it locks into
the desired position and cannot be
moved further.
1- 14 FEATURES OF YOUR HYUNDAI
!
WARNING:
To ensure the seat is locked securely, attempt to move the seat forward or rearward without using the
lock release lever.
B080C01A-AAT
Adjusting Seatback Angle
HTB026
To recline the seatback, lean forward to
take your weight off it, then pull up on
the recliner control lever at the outside
edge of the seat. Now lean back until
the desired seatback angle is achieved.
To lock the seatback into position,
release the recliner control lever.
!
WARNING:
To minimize risk of severe injury in
the event of a collision or a sudden
stop, both the driver and passenger seatbacks should always be in
an upright position while the vehicle is in motion. The protection
provided by the seat belts and
airbags may be reduced significantly when the seatbacks are reclined.
There is greater risk that the driver
and passenger will slide under the
seat belt which may result in serious injury if a crash occurs when
the seatbacks are reclined. The seat
belt cannot provide full protection
to an occupant if the seat back is
reclined.
B080D02JM-AAT
Adjustable Headrests
Lock knob
HFC2028
Headrests are designed to help reduce
the risk of neck injuries.
To raise the headrest, pull it up. To
lower the headrest, push it down while
pressing the lock knob. To remove the
headrest, raise it as far as it can go then
press the lock knob while pulling upward. This should only be done when
the seat is not occupied.
FEATURES OF YOUR HYUNDAI1- 15
!
WARNING:
B080D01JM
o For maximum effectiveness in case
of an accident, the headrest should
be adjusted so the middle of the
headrest is at the same height as
the top of the occupant's eyes. For
this reason, the use of a cushion
that holds the body away from the
seatback is not recommended.
o Do not operate the vehicle with the
headrests removed as severe injury to an occupant may occur in
the event of an accident. Headrests may provide protection
against severe neck injuries when
properly adjusted.
o Do not adjust the headrest hejght
while the vehicle is in motion.
B083D01NF-AAT
Active Headrests (If Installed)
HNF2041-1
The active headrest is designed to
move forward and upward during a rear
impact. This helps to prevent the driver's
and front passenger's head from moving backward and thus helps prevent
neck injuries.
B080E01O-AAT
Lumbar Support Control
(Driver's Seat Only) (If Installed)
HTB027
To adjust the lumbar support, turn the
handle on the outboard or left side of
the seat. To increase the amount of
lumbar support, pull the lever forward.
To decrease it, push the lever toward
the rear.
To raise or lower the front part of the
seat cushion, turn the front knob forward or rearward. To raise or lower the
rear part of the seat cushion, turn the
rear knob forward or rearward.
B080G01A-GAT
Adjusting Armrest Angle
(Driver's side only)
HTB2049
The armrest will be raised or lowered
manually.
To raise the armrest, pull it up.
To lower it, press the armrest down.
B130A01A-AAT
REAR SEAT ENTRY
(For 3-door model)
(1)
(2)
HTB258
The front passenger seatback should
be tilted to enter the rear seat.
By pulling up on the recliner control
lever (1) at the outside of the front
passenger seat, the seatback will tilt
forward and the seat will automatically
slide forward.
Rear seat occupants can tilt the front
passenger seatback by depressing the
foot lever (2) as shown in the illustration.
!
WARNING:
Passengers sitting in the rear seat
should be careful not to accidentally press the foot lever (2) while
the vehicle is moving, as this may
cause the seatback to move forward and injure a front seat occupant.
B080I01FC-GAT
REAR SEAT
Adjusting Seatback Angle
Seatback
folding lever
B080I01TB
To recline the seatback, push the
seatback folding lever toward the headrest, and release it after the desired
seatback angle is achieved.
When you recline the seatback to desired position, always be sure it has
locked into position.
FEATURES OF YOUR HYUNDAI1- 17
!
CAUTION:
When reclining the seatback you
should adjust the seatback folding
lever while standing.
Loading...
+ 425 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.