Humanscale CPUDolly User Manual

CPU Dolly with Platform Set-Up Instructions

Platform

Platform

For Use with CPUs 1.5” to 9” Wide

Front

Handle

Plastic
Screw Knob

Step 1: Open arms of CPU Dolly

Step 3: With Dolly arms open,

place platform onto Dolly as
shown

Step 2: Attach Front Handle by
placing bolt through one of three
holes on base (depending on desired
handle extension) and secure with
plastic screw knob.

Step 4: Center CPU on platform.
The arms will automatically close to
secure the CPU in place.

www.humanscale.com