Huebsch HWT921*N1127 Top-Load Parts Diagram
Topload
Washer
Preventative Maintenance
www.comlaundry.com
Part No. 3-05-11R1
October 2008
Table of Contents
Daily............................................................................................................................................................................2
Monthly ......................................................................................................................................................................4
Quarterly....................................................................................................................................................................8
Bi-Annually..............................................................................................................................................................10
Daily Preventative Maintenance Checklist...........................................................................................................13
Monthly Preventative Maintenance Checklist......................................................................................................13
Quarterly Preventative Maintenance Checklist ...................................................................................................14
Bi-Annually Preventative Maintenance Checklist ...............................................................................................14
IMPORTANT: Replace all panels that are removed to perform maintenance procedures. Do not operate the
washer with missing guards or with broken or missing parts. Do not bypass any safety devices.
© Copyright 2008, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without
the expressed written consent of the publisher.
3-05-11
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
Daily
IMPORTANT: Check that all safety and instruction labels are on the machine. Any missing or illegible safety
and/or instruction labels should be replaced immediately.
1. Check the lid switch before starting operation:
a. Attempt to start the machine in wash or spin cycle with the lid
open. The machine should not agitate or spin with the lid open.
b. Close the lid and start a cycle. If the lid switch is not
functioning properly, call a service technician.
2. Wipe the machine’s top, front and side panels clean as needed. If
detergent, bleach or other washing products are spilled on the
cabinet, wipe immediately. Some products will cause permanent
damage if spilled on cabinet. Thoroughly rinse and dry all
surfaces after cleaning them.
IMPORTANT: Use only a damp or sudsy cloth for cleaning the
control panel. Some cleaning products may harm the finish on
the control panel.
3. Clean the washtub as necessary. It may need rinsing or wiping
after an unusual load has been washer.
4. Leave the lid open at the end of each day to allow moisture to
evaporate.
NOTE: Unload the machine promptly after each completed
cycle to prevent moisture buildup. Leave the lid open after each
completed cycle to allow moisture to evaporate.
2 3-05-11
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5. Check coin slide, if applicable, for ease of operation. Replace if
needed.
Daily
3-05-11
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3
Loading...