Huawei Y600 U351 User Manual

Y600

Quick Start Guide

Dual-Card Dual-Standby

Your mobile phone supports dual-card dual-standby mode,
which can significantly reduce p ower consump tion and
increase your phone's standby time. Note that two restrictions
exist:



When you make calls using one SIM card, the other SI M
card is disabled.

For example, when you make calls using SIM card
1, SIM card 2 cannot be used to answer calls or
access the Internet. If someone calls SIM ca rd 2,
the caller will hear a voice message like "The
subscriber you dialed is out of the service zone" or
"The subscriber you dialed is not able to answer
your call, please try again later." This is because
your mobile phone cannot access the network
with both SIM cards at the same time and has
nothing to do with your service provider's network
condition. It is recommended that you subscribe to
services such as voicemail or missed -call rem inders
from your service provider to avoid the
inconvenience caused by missed calls.



When you are using one SI M card's data services, you can
receive calls and messages using the other SIM card, but
data services will be interrupted.

For example, when SIM card 1's data services are
in use, you can use SIM card 2 for calling and
messaging, bu t SIM card 1's data servi ces will be
interrupted as a result. When the call usin g SIM
card 2 is terminated, or the message is received or
sent, you can resume using SIM card 1's data
services.

1

Getting to know your phone

Thank you for choosing the HUAWEI smartphone.
First, let's take a look at a few basics.
Press and hold the power button to power on your phone.
After your phone is powered up, you can use th e power button
to turn the screen off and on.

2

Preparing your phone

To insert a SIM card, the battery and a microSD card please
perform the few steps shown in the following figures.
Your phone is shipped with the battery partially charged. It is
recommended that you fully charge the battery before using it
for the first time.

3

Dual-Card Management

Your mobile phone supports access to both WCDMA and GSM
networks. Follow the onscreen instructions or the quick start
guide to install SIM cards.

1.

On the home screen, touch > .

2.

Touch

SIM management

to activate the SIM cards.

4

Locking and unlocking the
screen

When you are not using your phone, press the power button
to turn off the screen.
After being idle for a specified period of time, your phone
automatically locks its screen.

Follow the onscreen instructions and drag to unlock the
screen or open an application.

5

Managing contacts

On the home screen, touch > to open

Touch the tab page to group your contacts for easier
management.

6

Contact

.

Making a call

On the home screen, touch > to open the dialer.

You can dial a phone number directly or touch to choose
a contact.
You can also touch a phone number in places like messages,
email and webpages to make a call.

To answer an incoming call, drag to .

7