Huawei MS2372H 153 User Manual

Quick Start

31508986_01

Thank you for choosing the Mobile Broadband USB Stick.

Note:

This manual describes the appearance of the USB Stick, as well as the procedures for preparation
and installa tio n.

Getting to Know Your USB Stick

The following figure shows the appearance of the USB Stick. It is provided only for your
reference. The actual product may be different.

 USB Connector

It connects the USB Stick to a PC.

 Indicat or

It indicates the status of the USB Stick.

 Green, blinki ng twice every 2s: T he USB S tick is powered on.
 Green, blinking once every 0.2s: The software of the USB Stick is being upgraded.
 Green, blinki ng once eve ry 2s: The USB Stick is regi stering w ith a 2G netw ork.
 Blue, blinking once every 2s: The USB Stick is registering with a 3G/3G+ network.
 Cyan, blinking once every 2s: The USB Stick is registering with an LTE net work.
 Green, solid: The USB Stick is connected to a 2G network.
 Blue, solid: The USB Stick is connected to a 3G network.
 Cyan, soli d: The USB Stick is connect ed to a 3G+/LTE networ k.
 Off: The USB Stick is removed.

 SIM Card Slot

It holds a Subscriber Identity Module (SIM) card.

Getting Your USB Stick Ready

1. Slide the cover to remove it from the USB Stick.

2. Insert the SIM card into the corresponding card slot, as shown in the fol lowing figure .

3. Replace the cover and slide it into place.

Note:

 Ensure that the beveled edge of the SIM card is properly aligned with that of the SIM

card slot.

 Do not remove the SIM card when the card is in use. Otherwise, the card as well as

your USB Stick may get damaged and the data stored on the card may be corrupted.