Huawei HG530 User Manual

Download

Page 1

HUAWEI HG530 Home Gateway

User Guide

HUAWEI TECHNOLOGIES CO., LTD.

Page 2

HUAWEI HG530 Home Gateway

V100R001

User Guide

Issue

Date

Part Number

2010-03-23

202168

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

Email: terminal@huawei.com

http://www.huawei.com

Page 3

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses.

Trademarks and Permissions

, , and

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respective owners.

are trademarks or registered trademarks of Huawei

Notice

Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

Page 4

Contents

1 Warnings and Precautions ....................................................................... 2

2 Getting Started .......................................................................................... 8

3 Setting the Network-Access Parameters ................................................. 8

3.1 Accessing the Network Through the Embedded PPP Dial-Up Software on

the HG530 ...........................................................................................................8

3.2 Accessing the Network Through the PPP Dial-Up Software on Your

Computer .............................................................................................................9

4 Configuring the Wireless Network Connection.................................... 10

5 Configuring the HG530 .......................................................................... 12

5.1 Changing the Administrator Password Used for Logging In to the

Web-Based Configuration Utility......................................................................12

5.2 Enabling or Disabling the Wireless Network Function..............................13

5.3 Changing the Wireless Network Name and the Access Password .............13

5.4 Changing the IP Address Used for Logging In to the Web-Based

Configuration Utility .........................................................................................14

5.5 Restoring Default Settings..........................................................................14

6 FAQs......................................................................................................... 16

7 Appendix.................................................................................................. 19

7.1 Indicators....................................................................................................19

7.2 Interfaces and Buttons................................................................................20

7.3 Default Settings..........................................................................................21

7.4 Technical Specifications.............................................................................21

Page 5

1 Warnings and Precautions

Thank you for purchasing the HUAWEI HG530 Home Gateway (hereinafter referred to as the HG530).

To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories.

Basic Requirements

During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects.

Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair.

Without authorization, no organization or individual can change the mechanical, safety, or performance design of the device.

When using the device, observe all applicable laws and regulations and respect the legal rights of other people.

Environmental Requirements for Using the Device

Before connecting and disconnecting cables, stop using the device, and then disconnect it from the power supply. Ensure that your hands are dry during operation.

Keep the device far from sources of heat and fire, such as a heater or a candle.

Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator.

Place the device on a stable surface.

Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight. Use the device in an area with a temperature ranging from 0°C to 40°C.

Do not block the openings on the device with any object. Reserve a minimum space of 10 cm around the device for heat dissipation.

Do not place any object (such as a candle or a water container) on the device. If any foreign object or liquid enters the device, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center.

Page 6

During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes.

Precautions for Using Wireless Devices

When using the device, ensure that the antenna of the device is at least 20 cm away from all persons.

Do not use the device where using wireless devices is prohibited or may cause interference or danger.

The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device.

Do not take the device into operating rooms, intensive care units (ICUs), or coronary care units (CCUs).

Areas with Inflammables and Explosives

Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols.

Do not store or transport the device in the same box as inflammable liquids, gases, or explosives.

Accessory Requirements

Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the performance of the device may get affected, the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void, or an injury may occur.

Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires may occur.

Ensure that the power adapter meets the specifications indicated on the device nameplate.

Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and it is tested and approved according to national or local standards.

Safety of Children

Keep the device and its accessories out of the reach of children. Otherwise, they may damage the device and its accessories by mistake, or they may swallow the small components of the device, causing suffocation or other dangerous situations.

Page 7

Maintenance

If the device is not used for a long time, power it off, and then remove all the cables connected to it.

If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center.

Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged, causing malfunction of the device.

Before cleaning the device, stop using it, power it off, and then remove all the cables connected to it.

Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or spray to clean the device shell.

Disposal and Recycling Information

T his symbol on the device (and any included batteries) indicates that the device (and any included batteries) should not be disposed of as normal household garbage. Do not dispose of your device or batteries as unsorted municipal waste. The device (and any batteries) should be handed over to a certified collection point for recycling or proper disposal at the end of its life.

For more detailed information about the recycling of the device or batteries, contact your local city office, the household waste disposal service, or the retail store where you purchased this device.

The disposal of this device is subject to the Waste from Electrical and Electronic Equipment (WEEE) Directive of the European Union. The purpose for separating WEEE and batteries from other waste is to minimize any environmental impact and health hazard due to the presence of hazardous substances.

Reduction of Hazardous Substances

This device is compliant with the EU Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament and of the Council) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive 2002/95/EC of the European Parliament and of the Council). For more information about the REACH compliance of the device,

Page 8

visit the Web site www.huaweidevice.com/certification. You are recommended to visit the Web site regularly for up-to-date information.

EU Regulatory Conformance

This device should be installed and operated with a minimum distance of 20 cm between the antenna and all persons.

Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този уред съответства на основните изисквания и другите разпоредби на Директива 1999/5/EC.

Česky: Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve shodě se základními požadavky a dalšími souvisejícími opatřeními směrnice 1999/5/EC.

Dansk: Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i direktiv 1999/5/EF.

Nederlands: Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EC.

English: Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Eesti: Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab Direktiivi 1999/5/EÜ põhinõudmistele ja teistele asjakohastele määrustele.

Suomi: Huawei Technologies Co., Ltd. vakuuttaa täten, että tämä laite on yhdenmukainen direktiivin 1999/5/EY olennaisten vaatimusten ja direktiivin muiden asiaankuuluvien lausumien kanssa.

Français (Européen) : Le fabricant déclare que ce produit est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Deutsch: Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses Produkt die erforderlichen Bestimmungen und andere relevante Verordnungen der Richtlinie 1999/5/EG einhält.

Ελληνικά: Δια της παρούσης η Huawei Technologies Co., Ltd. δηλώνει ότι αυτή η συσκευή συμμορφώνεται με τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις της οδηγίας 1999/5/Ε.Κ.

Magyar: Jelen nyilatkozaton keresztül a Huawei Technologies Co., Ltd. kijelenti, hogy a készülék megfelel az EC/5/1999 Irányelv összes lényeges követelményének és vonatkozó előírásának.

Page 9

Gaeilge: Fograíonn Huawei Technologies Co., Ltd leis seo go bhfuil an fheiste seo i gcomhlíonadh leis na fíor-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE.

Italiano: Col presente documento, Huawei Technologies Co., Ltd. dichiara che questo dispositivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 1999/5/CE.

Latviski: Ar šo Huawei Technologies Co., Ltd. paziņo, ka šī ierīce atbilst Direktīvas 1999/5/EC pamatprasībām un piemērojamajiem nosacījumiem.

Lietuviškai: Šiuo Huawei Technologies Co., Ltd. praneša, kad šis įtaisas atitinka Direktyvos 1999/5/EC pagrindinius reikalavimus ir taikomas sąlygas.

Malti: Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tagħmir hu konformi mal-ħtiġijiet essenzjali u provvedimenti rilevanti oħrajn ta’ Direttiva 1999/5/KE.

Polski: Wymieniona w tym dokumencie firma Huawei Technologies Co., Ltd. deklaruje, że niniejsze urządzenie spełnia zasadnicze wymagania w zakresie zgodności oraz inne odnośne postanowienia Dyrektywy 1999/5/EC.

Português (Europeu) : Deste modo, a Huawei Technologies Co., Ltd. declara que este dispositivo está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/CE.

Română: Prin prezenta Huawei Technologies Co., Ltd. declară că acest dispozitiv este conform cu cerinţele esenţiale şi alte prevederi relevante ale directivei 1999/5/CE.

Slovenčina: Huawei Technologies Co., Ltd. týmto vyhlasuje, že zariadenie je v súlade so základnými požiadavkami a inými relevantnými predpismi Smernice 1999/5/ES.

Slovenščina: Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v skladu z bistvenimi zahtevami in drugimi ustreznimi določbami Direktive 1999/5/ES.

Español (Europeo) : Con el presente documento, Huawei Technologies Co., Ltd. declara que este dispositivo cumple con los requisitos esenciales y con las demás disposiciones correspondientes de la Directiva 1999/5/CE.

Svenska: Huawei Technologies Co., Ltd. förklarar härmed att denna produkt överensstämmer med de grundläggande kraven och andra relevanta föreskrifter i direktiv 1999/5/EG.

For the declaration of conformity, visit the Web site www.huaweidevice.com/certification.

Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU).

Page 10

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

Note: This equipment has been tested and found digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device no Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device.

Any changes or modifications not expressly compliance could void the user’s authority to operate this equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

The shell of the device may be hot after the device is running for a long time, which will not affect the function of the HG622.

to comply with the limits for a Class B

t expressly approved by

approved by the party responsible for

Page 11

2 Getting Started

After you connect the cables, please press down the ON/OFF button on the side of the HG530 to power on the HG530.

After you power on the HG530, the Power indicators turns on and the ADSL indicator blinks (for less than three minutes), which indicates that the HG530 is being activated. After the ADSL indicator blinking, the Power and ADSL indicators keep solid on, which indicates that the HG530 is working properly.

3 Setting the Network-Access Parameters

Accessing the Network Through the

3.1

Embedded PPP Dial-Up Software on the HG530

If you select this method for accessing the network, the HG530 starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer. You do not need to install any special dial-up software on your computer or perform dial-up operations on your computer. To configure the HG530 and your computer for the network access, do as follows:

Step 1

Step 2

By default, both the user name and the password are admin. After the user name and the password are verified, you can access the Web-based configuration utility.

Step 3

Verify the HG530 and the PC have connected properly, and the PC has obtained the IP address.

1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1

in the address bar, and then press Enter.

2. In the displayed dialog box, enter the user name and the password, and

then click OK.

Enable the embedded dial-up function.

1. In the navigation tree on the left of the Web-based configuration utility,

choose Basic > WAN Setting.

2. Select a PVC number, such as 1, from the PVC drop-down combo box.

3. Enter the VPI and VCI that are provided by the network operator in the

VPI and VCI text boxes.

Page 12

4. Select Yes from the Active drop-down combo box and select Routing

from the Mode drop-down combo box.

Select PPPoE from the Encapsulation drop-down combo box.

6. ssword that are provided by the network

Enter the user name and pa operator in the Username and Pass settings of other parameters.

7. Click Submit to save the settings.

After you complete the preceding settings, you can surf the Internet. You need to perform the preceding operations on a computer once only. The next time

when you power on your computer, you can surf the Internet without any configuration.

Accessing the Network Through the PPP

3.2

word text boxes, and keep the default

Dial-Up Software on Your Computer

If you select this method for accessing the network, you need to install and configure the dial-up software on your computer. In add operations on your computer upon each startup. To conf computer for the network access, do as follows:

Step 1

For details, refer to the procedure for enabling the embedded dial-up function described in Step 2 in s Software on the HG530" Note that Bridge is selected from the Mode d combo box.

Step 2

The PPP dial-up softwa create a d an example):

Set the working mode of the HG530 to

ection 3.1 "Accessing the Network Through the Embedded PPP Dial-Up

Install and configure the PPP dial-up software on your computer.

re is pre-installed on certain computer operating systems. To

ial-up connection, do as follows (taking the Windows XP operating system as

1. Choose Start > All Programs > Accessories > Communications >

Network Connections.

2. Click Create a new connection in Network Tasks t

Connection Wizard window, and then click Next.

3. Select Connect to the Internet, and then click Next.

Select Set up my connection manually, and

4. then click Next.

5. Select Connect using a broadband connection that requires a user

name and passw

6. Enter the name (as desired) of the dial-up connection in ISP

then click Next.

7. .

Select Anyone's use or My use only, and then click Next

8. Enter the user name and password provided by the network operator and

used for

the dial-up connection, and then click Next.

ord, and then click Next.

ition, you need to perform dial-up

igure the HG530 and your

Bridge

rop-down

o display the New

Name, and

Page 13

9. Select Add a shortcut to this connection to my desktop, and then click

Finish. An icon for the dial-up connection is displayed on the desktop of your computer. You need to perform the preceding operations only once for creating a network

connection. After th double-click the icon for the dial-up connection, and then click Connect in the displayed dialog box.

e network connection is created, to access the network,

4 Configurin

g the Wireless Network

Connection

I less

f a wire network adapter is installed on your computer, you can connect you

computer to t

Setting Up a Wireless Connection Through the WPS Button

The HG530 supports the Wi-Fi Protected Setup (WPS) function. If your network adapter also supports the W wireless connection between your PC and the HG530 quickly. To set up a wireless connectio

Step 1

Step 2

he HG530 through a wireless connection.

The hardware installation methods and driver installation methods of wireless network adapters provided each other. For details, see the installation guide provided by the wireless network adapter provider.

PS function, you can use the WPS function to set up a

n, do as follows: Enable the wireless network

access password of the HG530, do as follows (taking the authentication type WP

A-PSK as an example):

1. In the navigation tree on the left of the Web-based con

choose Basic > Wireless Lan.

2. Select the Enable option button of Access Point.

3. Enter a wireless network name in the SSID text box.

4. Select WPA-PSK from the Authentication Type drop-dow

box.

5. Select AES from the Encryption d

6. Enter an access password in the Pre-Shared Key text box.

7. Click Submit to save Press the WPS button of the HG530 to enable the HG530 to enter the WPS

negotiation state.

function, and set the wireless network name and

the settings.

by different companies vary from

figuration utility,

n combo

rop-down combo box.

Page 14

Step 3

Enable the WPS negotiation function of the wireless network adapter on your PC within two minutes, and then wait for a moment (typically 10s and at most 120s).

The WPS indicator of the HG530 becomes on from the blinking the HG530 is connected to your PC through the WLAN.

This state lasts 300s. Then the

state, indicating that

WPS indicator turns off.

Setting Up a Wireless Connection Manually

If your network adapter does not support the WPS f connection between your PC and the HG530 manually. To manually connection, use either of the following methods:

Use the tool provided by your network adapter.

For details, see the user guide of your network adapter.

Use the wireless configuration software provided by the operating PC.

This section takes Windows XP as an example and describes how to set up a connection between your PC and the HG530 manually, do as follows:

Step 1

Step 2

To set the wi cess password, do as follows (taking the authentic

reless network name and the ac

ation type WPA-PSK as an example):

1. In the navigation tree on the left of the Web-based configuration utility

choose Basic > Wireless Lan.

2. Select the Enable option button of Access Point.

3. Enter a wireless network name in the SSID text box.

4. Select WPA-PSK from the Authe

box.

5. Select AES from the Encryption drop-down combo box.

6. Enter an access password in the Pre-Shared Key text box.

7. Click Submit to save the settings.

Step 3

Enable the wireless configuration service provided by Windows XP.

1. Right-click My Computer, and then choose Manage from the shortcut

menu.

In the Computer Management window, choose Computer

Management (Local) > Services and Applications >Services.

3. From the services listed in the right pane of the Computer Manageme

window, right-click Wireless Zero Configuration, and then choose

Properties from the shortcut menu.

unction, you can set up a wireless

set up a wireless

system of your

ntication Type drop-dow

n combo

wireless

Page 15

4. In the Wireless Zero Configuration Properties (Local Computer)

dialog box, check whether Service status is Started. If not, click the

Start button.

5. Click OK to close the dialog box. Then, close the Computer

Management window.

Step 4

After the password is verified, Connected appears on the icon of the wireless network in the wireless network list, which indicates that the computer HG530 through a wireless connection.

Con etwork connection on your computer.

figure the wireless n

1. Choose Start > All Programs > Accessories > Communications >

Network Connections.

2. In the Network Connections win

Connection to display a shortcut menu, and then choose Properties from

the shortcut menu.

3. In the Wireless Network Connection Properties dialog box, select

Wireless Networks.

4. e my wireless network settings.

Select Use Windows to configur

5. Click View Wireless Networks.

6. Select the wireless network that is configured in Step 2, and then click

Connect in the lower righ

7. In the displayed dialog box, enter the access password t

Step 2, and then click Connect.

8. Close the Wireless Network Connection dialog box.

9. In the Wireless Network Connection Properties dialog box, click OK.

dow, right-click Wireless Networ

t corner of the window.

hat is preset in

is connected to the

5 Configuring the HG530

Changing the Administrator Password Used

5.1

for Logging In to the Web-Based Configuration Utility

For safety reasons or to make the password easy to remember, you can change the administrator password for login after logging in to the Web-based configuration utility.

To change the pa word, do as follows: ss

Step 1

Step 2

system management page.

Tools

System Management

in the navigation tree to display the

Page 16

Step 3

Step 4

Step 5

After you ch logging in t configuration

5.2

Click Enter the old password in the

password in the in the

Cli

to display a dialog box.

Old Password

New Password

Retype to confirm

ange the password successfully, the current page jumps to the page for

o the Web-based configuration utility. To log in to the Web-based

utility, enter the new password, and then click OK.

If you forget the user name or password that has been changed, yo restore the default settings of the HG530 by pressing and holding the Reset button for over six seconds. Then, the user name and password that are used for logging in to the Web-based configuration utility are restored to default values. After you restore the default settings, however, your customized data is lo

to save the settings.

Submit

text box. Then enter the new password again

text box for confirmation.

st. Therefore, use this function with caution.

text box. Enter the new

u can

Enabling or Disabling the Wireless

Network Function

You can quickly enable or disable the wireless network function by pressing the WLAN button on the HG530. To enable the wireless network function, press and hold the WLAN button for over one second, and then release the button. You can disable the wireless network function in the same way. The WLAN indicato wireless network function is enabled.

ti hrough the

In addi on, you can enable or disable the wireless network function t Web-based configuration utility. To enable or disable the wireless netwo as follows:

Step 1

Step 2

Step 3

Step 4

Submit

Enable

Disable

to save the settings.

option button of

Basic

Access Point

r shows whether the

Wireless Lan

rk function, do

Changing the Wireless Network Name and

5.3

the Access Password

To chan e the name and access password for the wireless ng etwork, do as follows (taking e authentication type WPA-PSK as an example):

Step 1

Page 17

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

5.4

In the navigation tree on the left, choose Enter a wireless network name in the Select

WPA-PSK

ect

Sel

TKIP

ter an access password in the

En Cli

Submit

The WPS applications may vary with different types of wireless network adapters. For details about the configuration and operations of the WPS application, refer to the operation guide provided by the application provider.

from the

to save the settings.

Authen

Encryption

SSID

tication Type

drop-down combo box.

Pre-Shared Key

Basic

text box.

Wireless L

drop-down combo box.

text box.

Changing the IP Address Used for Logging

In to the Web-Based Configuration Utility

To mak the login IP address easy to remember, you can change the IP address after logging in to the Web-based configuration utility.

To change the IP address, do as follows:

Step 1

Step 2

Step 3

Step 4

settings page. E

nter a new IP address as desired in the

ter a subnet mask in

lick

To log in to the Web-based configuration utility after you chan address successfully, you need to launch the Internet Explorer, and then enter the new IP address in the address bar. Ensure that the IP address of the computer is in the same network segment as that of the HG530 so that the computer can access the Web-based configuration utility.

Basic

Submit

LAN Setting

to save the settings.

in the

navigation tree to display the LAN

Main IP Address

Main Subnet Mask

text box. Then,

ge the IP

Restoring Default Settings

5.5

Page 18

You can quickly restore the default settings of the HG530 by pressing the Reset button on the rea over six econds after the HG530 is powered on, and then release the button. In addition, you can r iguration utility. T restore the default settings through follows:

Step 1

Step 2

tep 3

After the preceding operations, the current page jumps to the login page. You can log in to the Web-based configuration utility by entering the default user name and password that are admin.

After you restore the default settings, your customized data is lost. Therefore, use this function with caution.

r panel. To restore the default settings, press and hold the Reset button for

estore the default settings of the HG530 through the Web-based conf

o the Web-based configuration utility, do as

in the navigation tree to display the reboot page.

Reboot

Select

Factory Default Settings

Click

Restart

Tools

Page 19

6 FAQs

How can I quickly enable or disable the wireless network function? Press and hold the WLAN button for over one second, and then release the button to

enable or disable the wireless network function. The WLAN indicator shows whether the wireless network function is enabled.

How can I quickly restore the default settings of the terminal? To restore the default settings, press and hold the Reset button on the rear panel for

over six seconds after the HG530 is powered on, and then release the button. What can I do if I cannot access the Internet through the terminal?

Step 1

If the Power indicator is off, perform further checks as follows:

If the Power indicator is still off, contact an authorized maintenance center.

Step 2

If the ADSL indicator blinks for a long time, perform further checks as follows:

If the ADSL indicator still blinks and does not turn solid on, contact your network operator.

Step 3

If the LAN indicator is off, perform further checks as follows:

Check whether the Power indicator on the terminal is solid on.

1. Ensure that the terminal is turned on.

2. Ensure that electricity comes from the socket and that the power input

from the socket meets the requirements described on the label of the terminal power adapter. If the voltage is unsteady, for example, if the voltage is too high or too low, do not use the terminal. Wait until the voltage restores to its normal level, and then use the terminal.

3. Ensure that the terminal is properly connected to the socket through

the power adapter.

After powering on the terminal, wait for about three minutes. Then, check whether the ADSL indicator on the terminal is solid on.

1. Ensure that telephone lines are properly connected. Pay special

attention to the connections between the telephone lines and the splitter.

2. Ensure that the terminal or telephone lines are far from the electric

appliances that generate strong magnetic or electric fields. Replace telephone lines when necessary.

Check whether the LAN indicator of the terminal is on.

1. Ensure that the network adapter of the computer is enabled.

2. Ensure that the network cable between the terminal and the computer

Page 20

is properly connected. Remove and then insert the network cable or replace the network cable when necessary.

If the LAN indicator is still off, contact an authorized maintenance center.

Step 4

If no network adapter is found or if a question mark (?) or an exclamation mark (!) is displayed next to the icon of the network adapter, you can infer that the driver for the network adapter is not properly installed. In this case, re-install the driver for the network adapter of the computer.

Step 5

The user name and the user password are provided by your network operator.

Step 6

If you cannot use the PPP dial-up software to dial successfully, perform further checks as follows:

If the problem persists, contact your network operator.

Step 7

Check whether the driver for the network adapter is properly installed. Take a computer that runs Windows XP as an example. To check whether the driver for the network adapter is installed, do as follows:

1. On the desktop, right-click My Computer, and then choose Manage.

2. In the navigation tree of the Computer Management window,

choose Device Manager.

3. In the right pane of the Computer Management window, click

Network adapters to view the information about the network adapter of the computer.

Ensure that you have entered the correct user name and user password that are required by the PPP dial-up software.

Check whether you can use the PPP dial-up software to dial successfully.

1. Stop the PPP dial-up software and then power off the terminal. After

five minutes, power on the terminal, and then use the PPP dial-up software to dial again.

2. Restore the default settings of the terminal.

Check whether the proxy server of the Web browser is correctly configured. Take the Internet Explorer installed on a computer that runs Windows XP as an example. To check whether the proxy server of the Web browser is correctly configured, do as follows:

1. Launch the Internet Explorer.

2. Choose Tools > Internet Options.

3. In the Internet Options dialog box, click the Connections tab.

4. In the Local Area Network (LAN) settings group box, click LAN

Settings.

5. In the Proxy server group box of the Local Area Network (LAN)

Settings dialog box, ensure that the Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). check box is cleared.

Page 21

Step 8

What can I do if Web pages often cannot be displayed during Web page browsing and can be displayed after the terminal is restarted?

Step 1

For details about how to install a splitter, see the related description in the manual.

Step 2

If the telephone lines are improperly connected, the stability of the network connection is affected.

Step 3

If the problem persists, contact your service provider.

What can I do if sometimes the terminal cannot access the Internet through a WLAN connection or if the WLAN connection is unsteady?

Step 1

Step 2

Although radio signals can pass through obstacles, the transmission effects of WLAN radio signals are affected if radio signals pass through too many obstacles, such as cement or wooden walls.

Step 3

If your computer is far from your terminal, the effects of the WLAN are affected.

Step 4

Step 5

After a broadband terminal is installed, does Internet access degrade call quality or do telephone calls lower the Internet access rate?

No. The terminal uses the frequency division multiplexing (FDM) and splitter technologies to separate voice signals from data signals. Although the two types of signals are transmitted through one telephone line, they are carried by different frequency bands. Therefore, they do not interfere with each other. In this case, you

Try to access multiple Web sites to check whether the terminal can access these Web sites.

If the terminal still cannot access Web sites, contact your network service provider.

Ensure that the terminal and other devices, such as telephones or fax machines, are connected to telephone lines through a splitter.

Ensure that telephone lines are properly connected.

Check the positions of your terminal and your computer. Ensure that they are far from electric appliances, such as microwave ovens, refrigerators, or cordless telephones, that generate strong magnetic or electric fields.

Check the positions of your terminal and your computer. Ensure that they are far from the electric appliances, such as microwave ovens, refrigerators, or cordless telephones, that generate strong magnetic or electric fields.

Place your terminal in an open area.

Place your computer close to your terminal.

Place your terminal and computer in another direction. Do not use your terminal to access the WLAN during thunderstorms.

Page 22

can make a telephone call and access the Internet simultaneously, without degrading call quality or lowering the Internet access rate.

7 Appendix

Indicators

7.1

Indicator Status Used to…

On The HG530 is powered on. Power Off The HG530 is powered off.

ADSL

Internet

WLAN

Blinking The HG530 is being activated. On The HG530 is activated. Off The HG530 is powered off. Blinking z The HG530 works in routing mode.

z The WAN connection is set up. z Data is being transmitted.

On z The HG530 works in routing mode.

z The WAN connection is set up. z No data is being transmitted.

Off

z The HG530 works in bridge mode or in routing mode. z No WAN connection is set up.

Blinking z The wireless network function is enabled.

z Data is being transmitted through the WLAN.

On z The wireless network function is enabled.

z No data is being transmitted through the WLAN.

Off The wireless network function is disabled.

Page 23

Indicator Status Used to…

WPS

LAN1 – LAN4

7.2

No. Description

2 WPS button, which is used to enable the WPS negotiation function. 3 Power button, which is used to power on or off the HG530. 4 Power interface, which is used to connect the HG530 to the power adapter. 5 Reset button, which is used to restore the factory settings of the HG530. 6 – 9

Blinking

Off The WPS function is disabled. Blinking Data is being transmitted through the Ethernet interface. On The Ethernet connection is set up. Off The Ethernet connection is not set up.

Interfaces and Buttons

WLAN button, which is used to enable or disable wireless network function quickly.

LAN interfaces, which are used to connect the HG530 to the Ethernet interface on the computer.

DSL interface, which is used to connect HG530 to the MODEM interface on the splitter or to the telephone jack on the wall.

The HG530 is attempting to set up a wireless connection with a wireless client (such as a PC on which a wireless network adapter is installed) through the WPS function.

This state lasts no more than 120s. A wireless connection is set up between the HG530 and a

wireless client through the WPS function. This state lasts 300s.

Page 24

Default Settings

7.3

Parameter Setting

IP address of the LAN interface 192.168.1.1 Subnet mask of the LAN interface 255.255.255.0 User name used for logging in to the

Web-based configuration utility Password used for logging in to the

Web-based configuration utility DHCP server function Enable Wireless network function Enable

Technical Specifications

7.4

Item Specification

Power supply 12 V DC, 0.5 A Power

consumption Ambient

temperature for operation

Ambient humidity for operation

Dimensions (L × W × H)

Weight About 245 g Standards

< 6 W

0°C to 40°C (32°F to 104°F)

5% to 95%, non-condensing

156.4 mm % 52 mm % 124.3 mm

ADSL standards ITU G.992.1 (G.dmt) Annex A

ADSL2 standard ITU G.992.3 (G.dmt.bis) Annex A

ADSL2+ standard ITU G.992.5 (G.dmt.bitplus) Annex A WLAN standard 802.11b, 802.11g, 802.11n (2.4 GHz)

admin

ITU G.994.1 (G.hs) ITU ANSI T1.413 Issue 2

ITU G.992.3 (G.dmt.bis) Annex L

Page 25

Item Specification

DSL transmission rates

G.dmt T1.413

G.992.5 (ADSL2+)

Wireless

802.11b

transmission rates

802.11g

802.11n

z Maximum downlink rate: 8 Mbit/s z Maximum uplink rate: 896 kbit/s

z Maximum downlink rate: 24 Mbit/s z Maximum uplink rate: 1024 kbit/s

1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, and 11 Mbit/s

6 Mbit/s, 9 Mbit/s, 12 Mbit/s, 18 Mbit/s, 24 Mbit/s, 36 Mbit/s, 48 Mbit/s, 54 Mbit/s

6.5 Mbit/s, 13.0 Mbit/s, 13.5 Mbit/s,

19.5 Mbit/s, 26.0 Mbit/s, 27.0 Mbit/s,

39.0 Mbit/s, 40.5 Mbit/s, 52.0 Mbit/s,

54.0 Mbit/s, 58.5 Mbit/s, 65.0 Mbit/s,

81.0 Mbps, 108.0 Mbit/s, 117.0 Mbit/s,

121.5 Mbit/s, 135.0 Mbit/s

Page 26

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

www.huawei.com

Part Number: 202168