Huawei FIG LX2 User Manual
FIG-LX2
Quick Start Guide
Your device at a glance
1
2
3
4
5
7
8
9
10
11
12
6
13
14
Before you start, let's take a look at your new device.
l To power on your device, press and hold the power button
until the screen turns on.
l To power off your device, press and hold the power button,
and then touch .
Rear camera Status indicator Front camera Earpiece Headset jack Primary microphone Micro-USB port Speaker Power button Volume button Light sensor Fingerprint scanner Flash Secondary microphone
l Press and hold the power button to force your device
to restart.
1
Getting Started
NJDSP4%
NJDSP4%
Follow the instructions in the following gures to set up your
device.
l Do not insert or remove the SIM card when your device
is powered on.
l Ensure that the card is correctly aligned and that the
card tray is level when you insert it into your device.
Be careful not to scratch your device or hurt yourself
when using the eject pin. Store the eject pin out of the
reach of children to prevent accidental swallowing or
injury.
Do not use cut or modied SIM or microSD cards with
your device as these may not be recognized and could
damage the card tray (slot).
2
Loading...