Huawei B818-263 LTE CPE User Manual
Quick Start
31500CQA_01
Product overview
1
2
5
6
7
8
9
10
11
12
SIM Card
RESET
MAIN
DIV
LAN1
LAN2/WAN
TEL
POWER
STATUS
LAN
WIFI
MODE
3
4
1
2
3
4
5
6
7
8
9
10
11
12
Power button
Power input
Wi-Fi® indicator
Network status indicator
Hi/WPS button
SIM card slot
LAN/WAN port
MODE indicator
LAN indicator
Power indicator
Signal indicators
Reset button
1
Setup
mini-SIM (2FF)
micro-SIM (3FF)
nano-SIM (4FF)
SIM Card
SIM Card
RESET
RESET
SIM Card
RESET
RESET
SIM Card
RESET
1 Make sure you use the correct SIM card.
2 Open the SIM card cover.
3 Insert the SIM card gently into the SIM card slot in the direction shown in the figure below until it
clicks. Then close the SIM card cover.
2
• To remove the SIM card, gently press the SIM card in until it clicks. The card will
MAIN
DIV
LAN1
LAN2/WAN
TEL
automatically pop out.
• Do not insert or remove a SIM card when the router is running, as this may affect
performance or damage the SIM card.
4 Connect the power adapter to the router.
The indicators will turn on when the router has successfully connected to a network.
MODE indicator Cyan/blue: Connected to an LTE/3G network.
Signal indicators Green: signal reception available (more indicators mean better reception).
If the MODE indicator is red, it indicates there is no network connection. Please refer to the
FAQs in this guide.
3
Connecting to your router's Wi-Fi network
Wi-Fi Name
Wi-Fi Password
SIM Card
Wi-Fi Name: XXXXXXX
Wi-Fi Password : YYYYYY
Wi-Fi Password:
Wi-Fi Password:
RESET
XXXXXXXX
abcdefg
XXXXXXXX
YYYYYYY
YYYYYYY
Once the router has connected to a mobile data network, you can connect your computer or mobile
phone to the router's Wi-Fi network to access the Internet. Please refer to the label on the bottom of the
router for the default Wi-Fi network name (Wi-Fi Name) and password (Wi-Fi Password).
• When the Wi-Fi indicator is steady on, Wi-Fi is enabled. To enable or disable Wi-Fi, refer to
the router's web-based management page.
• Ensure that you promptly change the Wi-Fi network name and password on the web-based
management page to prevent unauthorized access to your Wi-Fi network. Once you have
changed the password, you will need to reconnect to the router's Wi-Fi network.
4
Loading...