
1 Product overview
Power indicator
®
Wi-Fi
/WPS indicator
Signal strength indicator
LAN/WAN port
Landline phone port
Power button
Micro-SIM card slot
Network status indicator
LAN/WAN indicator
Power input
External antenna sockets
Reset button
WPS button
1

2 Setup
mini-SIM (2FF)
micro-SIM (3FF)
nano-SIM (4FF)
1. Make sure you use the correct SIM card.
2. Insert the micro-SIM card gently into the card tray in the direction
shown in the figure below until it clicks.
Note:
• To remove the micro-SIM card, gently press the micro-SIM card in
until it clicks. The card will automatically pop out.
• Do not insert or remove a micro-SIM card when the router is
running, as this may affect performance or damage the micro-SIM
card.
2

3. Connect the power adapter to the router.
The following indicators will turn on when the router has successfully
connected to a network.
Cyan/blue/yellow:
Connected to a mobile
network.
Note:
If the
Please refer to the FAQs in this guide.
indicator is red, it indicates there is no network connection.
White: More signal bars
indicate a stronger signal.
3

3 Connecting to your router's Wi-Fi
SSID:....................
Wi-Fi KEY:.............
network
Once the router has connected to a mobile data network, you can connect
your computer or mobile phone to the router's Wi-Fi network to access the
Internet. Please refer to the label on the back of the router for the default
wireless network name (SSID) and password (Wi-Fi KEY).
Note:
• When the
disable Wi-Fi, refer to the help section on the router's web-based
management page.
• Ensure that you promptly change the Wi-Fi network name and
password on the web-based management page to prevent
unauthorized access to your Wi-Fi network. Once you have changed
the password, you will need to reconnect to the router's Wi-Fi
network.
indicator is steady on, Wi-Fi is enabled. To enable or
4

4 Configuring your router
User name:
yyy
Password:
zzz
XXX.XXX.X.X
XXX.XXX.X.X
User name
:
yyy
Password:
zzz
IP:XXX.XXX.X.X
User:yyy
Password:zzz
You can configure the router using the web-based management page.
Please refer to the label on the back of the router for the default IP address,
user name, and password.
More information can be found in the help section of the web-based
management page.
Note:
You will be prompted to change the default login password for the webbased management page to prevent unauthorized users from changing
the router's settings.
5

5 Optional configurations
The features described in this section are for reference purposes only. Your
router may not support all of these features.
1. Connecting multiple devices
You can connect a computer, or landline phone to the router to access the
Internet, make telephone calls, and more.
6