Product overview
Power indicator Network status indicator
Wi-Fi®/WPS indicator
Signal strength indicator Power input
LAN/WAN port External antenna ports
Landline phone port Reset button
Power button WPS button
SIM card slot
LAN/WAN indicator
1
Setup
mini-SIM (2FF)
micro-SIM (3FF)
nano-SIM (4FF)
1 Make sure you use the correct SIM card.
2 Insert the SIM card gently into the SIM card slot in the direction shown in the figure below until it
clicks.
• To remove the SIM card, gently press the SIM card in until it clicks. The card will
automatically pop out.
• Do not insert or remove a SIM card when the router is running, as this may affect
3 Connect the power adapter to the router.
performance or damage the SIM card.
2
The indicators will turn on when the router has successfully connected to a network.
Network status indicator Cyan/blue/yellow: Connected to an LTE/3G/2G network.
Signal strength indicator White: More signal bars indicate a stronger signal.
If the network status indicator is red, it indicates there is no network connection. Please refer
to the FAQs in this guide.
3