HTC PG41400 Users Manual

Safety and

regulatory guide

2 Safety and regulatory guide

Please read before proceeding

THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
PRODUCT OUT OF THE BOX.

YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR
ATTEMPT TO DISASSEMBLE THE DEVICE.

Disclaimers

ANY WEATHER, STOCK, OR OTHER INFORMATION, DATA, OR
DOCUMENTATION (“ACCESSED INFORMATION”) ARE PROVIDED
“AS IS” AND WITHOUT ANY WARRANTY OR ANY TECHNICAL
SUPPORT. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, HTC AND ITS AFFILIATES expressly disclaim
any and all representations and warranties, arising by law or
otherwise, related to the Accessed Information, including without
limitation any express or implied representation or warranty of
merchantability, fitness for a particular purpose, non-infringement,
quality, accuracy, completeness, effectiveness, reliability, or
usefulness. Without limiting the foregoing, it is further understood
that HTC and its Affiliates are not responsible for any use of the
Accessed Information or the results arising from such use, and
that you use such information at your own risk.

Safety and regulatory guide 3

Limitation of damages

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN
NO EVENT SHALL HTC OR ITS AFFILIATES BE LIABLE TO YOU,
ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF
ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE,
INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE,
LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY,
LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS
OF THE FORESEEABILITY THEREOF OR WHETHER HTC OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AND IN NO EVENT SHALL THE TOTAL
LIABILITY OF HTC OR ITS AFFILIATES EXCEED THE AMOUNT
RECEIVED FROM YOU, REGARDLESS OF THE LEGAL THEORY
UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE
FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS
WHICH MAY NOT BE DISCLAIMED.

Important health information and safety
precautions

When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.

Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.

To reduce the risk of bodily injury, electric shock, fire, and damage
to the equipment, observe the following precautions.

Electrical safety

This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.

Safety precautions for proper grounding installation

CAUTION: Connecting to improperly grounded equipment can

result in an electric shock to your device.
This product is equipped with a USB Cable for connecting

with desktop or notebook computer. Be sure your computer is
properly grounded (earthed) before connecting this product to
the computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate

4 Safety and regulatory guide

outlet which is properly installed and grounded in accordance with
all local codes and ordinances.

Safety precautions for power supply unit

Use the correct external power source



A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with the
product.

Handle battery packs carefully



This product contains a Lithium-ion polymer or Lithium-ion
battery. There is a risk of fire and burns if the battery pack
is handled improperly. Do not attempt to open or service
the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60˚C
(140˚F).

WARNING: Danger of explosion if battery is incorrectly

replaced. To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external contacts,
expose to temperature above 60° C (140° F), or
dispose of in fire or water. Recycle or dispose of used
batteries according to the local regulations or reference
guide supplied with your product.

Take extra precautions



Keep the battery or device dry and away from water or any

•

liquid as it may cause a short circuit.
The device should only be connected to products that bear

•

the USB-IF logo or have completed the USB-IF compliance
program.
If the battery leaks:

•

Do not allow the leaking fluid to come in contact with

•

skin or clothing. If already in contact, flush the aected
area immediately with clean water and seek medical
advice.

Safety and regulatory guide 5

Do not allow the leaking fluid to come in contact with

•

eyes. If already in contact, DO NOT rub; rinse with clean
water immediately and seek medical advice.
Take extra precautions to keep a leaking battery away

•

from fire as there is a danger of ignition or explosion.

Safety precautions for direct sunlight

Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product inside a vehicle or in
places where the temperature may exceed 60°C (140°F), such as
on a car dashboard, window sill, or behind a glass that is exposed
to direct sunlight or strong ultraviolet light for extended periods of
time. This may damage the product, overheat the battery, or pose
a risk to the vehicle.

Prevention of hearing loss

CAUTION: Permanent hearing loss may occur if

earphones or headphones are used at high volume

NOTE: For France, Earphone (listed below) for this device

for prolonged periods of time.

have been tested to comply with the Sound Pressure
Level requirement laid down in the applicable NF EN
50332-1:2000 and/or NF EN 50332-2:2003 standards as
required by French Article L. 5232-1.

Earphone, manufactured by HTC, Model RC E160.

•

Safety in aircraft

Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device’s wireless function on board an airplane is against
the law in most countries. If you want to use this device when
on board an aircraft, remember to turn off wireless function by
switching to Airplane Mode.

Environment restrictions

Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as fuelling areas, fuel
storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.

6 Safety and regulatory guide

Explosive atmospheres

When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury
or even death. Users are advised not to use the equipment at
refueling points such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio equipment
in fuel depots, chemical plants, or where blasting operations are in
progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below
deck on boats, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain,
dust, or metal powders.

Road safety

Full attention must be given to driving at all times in order to
reduce the risk of an accident. Using this device while driving
(even with a hands free kit) causes distraction and can lead to
an accident. You must comply with local laws and regulations
restricting the use of wireless devices while driving.

Safety precautions for RF exposure

Avoid using your device near metal structures (for example,



the steel frame of a building).
Avoid using your device near strong electromagnetic



sources, such as microwave ovens, sound speakers, TV and
radio.
Use only original manufacturer-approved accessories, or



accessories that do not contain any metal.
Use of non-original manufacturer-approved accessories may



violate your local RF exposure guidelines and should be
avoided.

Exposure to radio frequency (RF) signals

Your device contains a radio transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your device, the system handling your connection controls
the power level at which your device transmits.

The radiated output power is far below the international radio
frequency exposure limits. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the

Safety and regulatory guide 7

general population. The guidelines are based on the safety
standards previously set by international standards bodies:

American National Standards Institute (ANSI) IEEE. C95.1-



1992
National Council on Radiation Protection and Measurement



(NCRP). Report 86. 1986
International Commission on Non-Ionizing Radiation



Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards



include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.

Your mobile device is designed not to exceed the limits for
exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific
organisation ICNIRP and include safety margins designed to
assure the protection of all persons regardless of age and health.

The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR.

As mobile devices offer a range of functions, they can be used
in other positions, such as on the body as described in this user
guide**.

As SAR is measured utilising the device’s highest transmitting
power, the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to
the power level of the device to ensure it only uses the minimum
power required to communicate with the network.

**Please see the following section about body worn operation
As with other mobile radio transmitting equipment, users are

advised that for satisfactory operation of the equipment and for
the safety of personnel, it is recommended that no part of the
human body be allowed to come too close to the antenna during
operation of the equipment.

Your device has an internal antenna. Use of unauthorised or
modified antennas may impair transmission quality and damage
the device, causing loss of performance and SAR levels exceeding
the recommended limits as well as result in non-compliance with
local regulatory requirements in your country.

To assure optimal wireless performance and ensure human
exposure to RF energy is within the guidelines set forth in the
relevant standards; always use your device only in its normal-use
position. Do not touch or hold the antenna area unnecessarily
when using the wireless function. Contact with the antenna area