QuickSpecs
HPE SAS Hard Drives
Overview
Page 1
HPE Hard Disk Drives
HPE Hard Disk Drives (HDDs) delivers proven performance at industry leading capacities backed by high quality and reliability
preferred choice for many workloads ranging from small businesses to large enterprise.
HPE hard disk dri
that demand reliable performance in 24x7 operational environments. HPE HDDs offer customers great value per gigabyte
without sacrificing performance.
rugged enough for any need.
HPE HDDs are available for three types of workloads
variety of capacities—up to 10 TB and growing.
What's New
• HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
• HPE 6TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
ves are optimized to deliver maximum performance on HPE server platforms, and are proven for applications
In addition, an industry-leading testing and qualification program ensures that our drives are
—Entry, Midline and Enterprise, two interfaces—SAS and SATA, and in a
,
• HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
• HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
QuickSpecs
HPE SAS Hard Drives
Overview
Page 2
Models
HPE SAS Hot Plug “SmartDrive” Carriers
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
718162-B21
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652589-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652583-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652572-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652564-B21
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
781518-B21
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
785069-B21
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
781516-B21
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
785067-B21
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652611-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
652605-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759212-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759210-B21
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
759208-B21
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard Drive
791034-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC 512e Enterprise 3yr Warranty Hard Drive
748387-B21
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
652749-B21
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
652745-B21
HPE 1TB 12G SAS 7.2K rpm SFF (2.5in) SC Midline 1yr Warranty Hard Drive
832514-B21
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline 512e Drives
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765466-B21
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765464-B21
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive
652620-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive
652615-B21
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive
765424-B21
HP 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive
737394-B21
HP 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive
737261-B21
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HPE 6TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846514-B21
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
761477-B21
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
695510-B21
HPE 3TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846528-B21
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
652766-B21
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
652757-B21
HPE 1TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846524-B21
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
652753-B21
HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
818367-B21
HPE 2TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
818365-B21
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Drives
HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
819201-B21
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard Drive
765259-B21
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard Drive
765257-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HPE SAS Hard Drives
Overview
Page 3
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Performance Drives
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty Hard Drive
793671-B21
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty Hard Drive
793669-B21
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Helium Drives
HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
857644-B21
HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
861590-B21
HP 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard Drive
793703-B21
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard Drive
793699-B21
HPE SAS Hot Plug Drives
NOTE: These drives are not supported by Gen8/Gen9 servers.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
718160-B21
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
619291-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
581286-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
581284-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
507127-B21
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785079-B21
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785075-B21
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785073-B21
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785071-B21
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive
627117-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
512547-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785103-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785101-B21
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
785099-B21
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
516828-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
516816-B21
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) CC Enterprise 3yr Warranty Hard Drive
737396-B21
HP 450GB 12G SAS 15K rpm LFF (3.5-inch) CC Enterprise 3yr Warranty Hard Drive
737392-B21
HP 300GB 12G SAS 15K rpm LFF (3.5-inch) CC Enterprise 3yr Warranty Hard Drive
737390-B21
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
605835-B21
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
507610-B21
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
782669-B21
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
693689-B21
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
625031-B21
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive
507616-B21
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive
507614-B21
SAS Hot Plug LFF (3.5-inch) Midline (MDL) 512e Helium Drives
HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
869347-B21
HP 8TB 12G SAS 7.2K rpm LFF (3.5-inch) 512e Helium 1yr Warranty Hard Drive
793701-B21
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) 512e Helium 1yr Warranty Hard Drive
793697-B21
HPE SAS Non-Hot Plug Drives
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
537809-B21
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
516830-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HPE SAS Hard Drives
Overview
Page 4
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
516826-B21
HPE SAS Quick Release Drives
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Quick Release Dual Port ENT 3yr Warranty Hard Drive
718164-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
574879-B21
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
574758-B21
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
HP 4TB 6G SAS 7.2k rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive
697956-B21
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Quick-release Dual Port Midline 1yr Warranty Hard Drive
574761-B21
NOTE: Refer to the appropriate server QuickSpecs for full compatibility details.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HPE SAS Hard Drives
Standard Features
Page 5
What is SAS?
Serial Attached SCSI (SAS) is the evolution of the SCSI interface. SAS Enterprise drives satisfy the
enterprise data center requirement of scalability, performance, reliabilit
providing an enterprise storage infrastructure for both enterprise SAS drives and SATA disk drives.
SAS Midline drives provide the lowest dollars per gigabyte and economical reliability and performance.
The SAS interface is compa
unprecedented choices for server and storage subsystem deployment.
Drive Quality and
Today's distributed enterprise is seeing larger, more complex applications, an increase of missioncritical data moving to the server, increasing demand for transaction processing and critical server
consolidation. In this environment, storage has become a critical component of the information system,
significantly defining both the systems reli
Enterprise
incompatibilities. All drive firmware is specific to our drives and is designed to maximize both
functionality
systems for which they were designed.
While selecting the drives in our Enterprise portfolio, only those drives whose performance is suitable
for an enterprise environme
process and are labeled "best
class." All our Enterprise drives are proven to be reliable and tuned for
optimum performance in the
The drives in our Midline portfolio undergo a similar qualification process to ensure that you get the
economical reliability and performance you need for your low workload (less than 40% I/O)
environments.
Performance
Only those drives whose performance is suitable for an enterprise environment are selected through
the
proven to be reliable and tuned for optimum performance in the
equipment
Pre-Failure Alert
When used in conjunction with a SMART Array Controller and Systems Insight Manager, the SMART
capable firmware in
problems develop in one of the drives, the Smart Array Controller, Systems Insight Manager and/or
SMART hard disk drive lets you know in advance so you can have the drive replaced, before it fails,
under warranty.
NOTE:
and Systems Insight Manager, allowing hard drives to be replaced before failure under warranty. In
addition, all drives are covered by a one or three
system in which they are installed. The drive warranty is automatically uplifted when used in a
server or MSA for which a Care Pack is purchased. Please see the Support Services section below
for additional services.
Integration
Many issues customers have with third party drives are "simple" integration issues. When buying from
another supplier, there is no guarantee that a drive has been correctly set for proper operation with
ProLiant servers and storage systems. These incompatibilities
can rob your system of performance, or at their worst, can cause you to lose data.
specifically designed and tested for flawless operation in your
The integrati
settings, termination, hot plug drive trays and firmware are right for your ProLiant server or storage
system.
Support Matrix
Please see the following URL for the latest list of supported servers and enclosures:
http://www.hp.com/go/proliantoptions
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
y and manageability, while
tible with SATA devices. This compatibility provides users with
Performance
ability and performance. This is why Hewlett Packard
drives undergo an intense qualification process that eliminates firmware and O/S
and compatibility. All drives are proven to perform in the Hewlett Packard Enterprise
nt are selected through the Hewlett Packard Enterprise qualification
-inHewlett Packard Enterprise equipment for which they were designed.
Hewlett Packard Enterprise qualification process and are labeled "best-in-class." All our drives are
Hewlett Packard Enterprise
for which they were designed.
HPE hard drives enables extensive fault prediction capabilities. If potential
All drives are protected by a Pre-Failure Alert when used with a HPE Smart Array controller
-year limited on-site warranty period for the
can create problems in configuration,
on of hard drives in Hewlett Packard Enterprise systems means that cables, SCSI ID
Hewlett Packard Enterprise equipment.
HPE hard drives are
QuickSpecs
HPE SAS Hard Drives
Standard Features
Page 6
Warranty
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the
system in w
SAS Midline hard drives have a 1 year limited warranty regardless of the warranty period for the
system in which they are installed.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
hich they are installed.
QuickSpecs
HPE SAS Hard Drives
Service and Support
Page 7
Service and Support
NOTE: HPE SATA and SAS Hard drives are covered under the HPE Care Pack/ Service Contract
response time as you purchase your new server, giving you full entitlement for the term you select.
Connect your devices to
Unlock all of the benefits of your technology investment by connecting your products to Hewlett
storage and networking products, securely connected to HPE support.
Warranty
ATA, SATA and MDL SAS hard drives have a maximum warranty period of one (1) year regardless of
the warranty period for the system in which they are installed.
Service Coverage
For ProLiant servers and storage systems, the service on the main product covers HPE-branded
at the same service level as the main product.
For more information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
http://www.hp.com/services/proliant or http://www.hp.com/services/bladesystem
Parts and Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
replaced by Hewlett Packard Enterprise due to malfunction.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
applied to the HPE ProLiant Server. No separate HPE Care Packs need to be purchased.
HPE Technology Services for Industry Standard Servers and BladeSystem
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our
support technology lets you to tap into the knowledge of millions of devices and thousands of experts
to stay informed and in control, anywhere, any time.
Protect your business beyond warranty with HPE Pointnext operational services
HPE Pointnext operational services enable you to order the right service level, length of coverage and
HPE
Packard Enterprise. Achieve up to 77% reduction in down time, near 100% diagnostic accuracy and a
single consolidated view of your environment. By connecting, you will receive 24x7monitoring, prefailure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and
HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent
issues and increase optimization. All of these benefits are already available to you with your server
hardware options not designated by Hewlett Packard Enterprise as requiring separate coverage that
are qualified for the server, are purchased at the same time or afterward, and are internal to the
enclosure. The service also covers external monitors up to 22 inches in size and tower UPS products
during their supported life of up to 5 years beyond sales discontinuance. These items will be covered
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
maintain the covered hardware product in operating condition, including parts and materials for
available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the
technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
QuickSpecs
HPE SAS Hard Drives
Technical
Page 8
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 1.2TB 6G SAS 10K
718162-B21
Capacity
1,200,243MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.3 ms
Average
4.6 ms
Full-Stroke
8.9 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
2,344,225,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 900GB 6G SAS 10K
652589-B21
Capacity
900,185MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.21 ms
Average
3.8 ms
Full-Stroke
7.4 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,758,174,768
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 600GB 6G SAS 10K
652583-B21
Capacity
600,127MB
Height
0.62 in (15.6 mm)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Specifications
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm SFF (2.5-inch) SC
Dual Port Enterprise 3yr
Warranty Hard Drive
rpm SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
(typical reads, including
settling)
(System Inlet Air
rpm SFF (2.5-inch) SC
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 9
Enterprise 3yr Warranty
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.3 ms
Average
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 1.2TB 6G SAS 10K
inch) Quick
718164-B21
Capacity
1,200,243MB
Height
0.740 in (18.8 mm)
Width
2.909 in (73.9 mm)
Depth
3.945 in (100.2 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.3ms
Average
4.6ms
Full-Stroke
8.9ms
Rotational Speed
10,000rpm
Physical Configuration
Bytes/Sector
512 Logical Blocks
2,344,225,968
Operating Temperature
50° to 95° F (10° to 35°
HPE 450GB 6G SAS 10K
652572-B21
Capacity
450,098MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
6 Gb/sec
Seek Time
Single Track
0.3 ms
Average
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Hard Drive
(typical reads, including
settling)
rpm SFF (2.5Release Dual Port ENT
3yr Warranty Hard
Drive
(System Inlet Air
(typical reads, including
settling)
rpm SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
(System Inlet Air
Temperature)
Synchronous (Maximum)
(typical reads, including
settling)
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 10
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 300GB 6G SAS 10K
652564-B21
Capacity
300,000MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.3 ms
Average
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 1.2TB 12G SAS 10K
781518-B21
Capacity
1,200,243MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.10 ms
Average
3.7 ms
Full-Stroke
7.3 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
2,344,225,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 900GB 12G SAS
785069-B21
Capacity
900,185MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(System Inlet Air
C)
rpm SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
rpm SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
(Maximum)
(typical reads, including
settling)
10K rpm SFF (2.5-inch)
SC Enterprise 3yr
Warranty Hard Drive
(System Inlet Air
(Maximum)
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 11
Seek Time
Single Track
0.10 ms
Average
3.5 ms
Full-Stroke
7.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,758,174,768
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 600GB 12G SAS
781516-B21
Capacity
600,127MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.11 ms
Average
3.3 ms
Full-Stroke
6.6 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 300GB 12G SAS
785067-B21
Capacity
300,000MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.10 ms
Average
3.3 ms
Full-Stroke
6.7 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
50° to 95° F (10° to 35°
C)
HPE 300GB 6G SAS 15K
652611-B21
Capacity
300,000MB
Height
0.62 in (15.6 mm)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
10K rpm SFF (2.5-inch)
SC Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
(typical reads, including
settling)
10K rpm SFF (2.5-inch)
SC Enterprise 3yr
Warranty Hard Drive
(System Inlet Air
(typical reads, including
settling)
(System Inlet Air
Temperature)
rpm SFF (2.5-inch) SC
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 12
Enterprise 3yr Warranty
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.4 ms
Average
2.9 ms
Full-Stroke
5.3 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 146GB 6G SAS 15K
652605-B21
Capacity
146,815MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.4 ms
Average
3.0 ms
Full-Stroke
7.0 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512 Logical Blocks
286,749,488
Operating Temperature
50° to 95° F (10° to 35°
C)
HPE 600GB 12G SAS
759212-B21
Capacity
600,127MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Hard Drive
(typical reads, including
settling)
rpm SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
(System Inlet Air
(typical reads, including
settling)
15K rpm SFF (2.5-inch)
SC Enterprise 3yr
Warranty Hard Drive
(System Inlet Air
Temperature)
Synchronous (Maximum)
(typical reads, including
settling)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 13
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 450GB 12G SAS
759210-B21
Capacity
450,098MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
50° to 95° F (10° to 35°
HPE 300GB 12G SAS
759208-B21
Capacity
300,000MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise 512e Drives
Application
SAS 512e drives are intended for servers and storage solutions that are 4K aligned. These drives are
suitable for servers and storage solutions with mission critical and high work load intensive applications
applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
15K rpm SFF (2.5-inch)
SC Enterprise 3yr
Warranty Hard Drive
15K rpm SFF (2.5-inch)
SC Enterprise 3yr
Warranty Hard Drive
(System Inlet Air
(typical reads, including
settling)
(System Inlet Air
Temperature)
C)
(typical reads, including
settling)
(System Inlet Air
C)
where 24/7 duty cycles are a requirement, such as database applications and high transaction level
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 14
HPE 1.8TB 12G SAS 10K
791034-B21
Capacity
1,800,360MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.10 ms
Average
3.7 ms
Full-Stroke
7.3 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
3,516,328,368
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 600GB 12G SAS
748387-B21
Capacity
600,127MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 1TB 6G SAS 7.2K
652749-B21
Capacity
1,000,204MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm SFF (2.5-inch) SC
Enterprise 512e 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
C)
15K rpm SFF (2.5-inch)
SC Enterprise 512e 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm SFF (2.5-inch) SC
Midline 1yr Warranty
Hard Drive
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 15
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.7 ms
Full-Stroke
17.16 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512 Logical Blocks
1,953,525,168
Operating Temperature
50° to 95° F (10° to 35°
HPE 500GB 6G SAS 7.2K
652745-B21
Capacity
500,107MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.7 ms
Full-Stroke
17.16 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
976,773,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 1TB 12G SAS 7.2K
832514-B21
Capacity
1,000,204MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.5 ms
Average
6.8 ms
Full-Stroke
17.00 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,953,525,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(typical reads, including
settling)
rpm SFF (2.5-inch) SC
Midline 1yr Warranty
Hard Drive
(System Inlet Air
Temperature)
Synchronous (Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
C)
rpm SFF (2.5in) SC
Midline 1yr Warranty
Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 16
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline 512e Drives
Application
SAS Midline 512e drives are intended for servers and storage solutions that are 4K aligned. These
such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 2TB 12G SAS 7.2K
512e 1yr Warranty Hard
765466-B21
Capacity
2,000,398MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.7 ms
Full-Stroke
17.16 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,953,525,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 1TB 12G SAS 7.2K
512e 1yr Warranty Hard
765464-B21
Capacity
1,000,204MB
Height
0.62 in (15.6 mm)
Width
2.98 in (75.7 mm)
Depth
4.67 in (118.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.7 ms
Full-Stroke
17.16 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,953,525,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
drives are intended for servers and storage solutions where high capacities are required. These drives
have moderately-priced reliability and performance for non-mission critical, low workload applications,
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm SFF (2.5-inch) SC
Drive
rpm SFF (2.5-inch) SC
Drive
(typical reads, including
settling)
(System Inlet Air
(typical reads, including
settling)
(Maximum)
(Maximum)
C)
(System Inlet Air
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 17
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 600GB 6G SAS 15K
652620-B21
Capacity
600,127MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.2 ms
Average
3.5 ms
Full-Stroke
6.8 ms
Rotational Speed
15000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 450GB 6G SAS 15K
652615-B21
Capacity
450,098MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.2 ms
Average
3.5 ms
Full-Stroke
6.8 ms
Rotational Speed
15000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 600GB 12G SAS
765424-B21
Capacity
600,127MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
12Gb/sec
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm LFF (3.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
rpm LFF (3.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
15K rpm LFF (3.5-inch)
SC Converter Enterprise
3yr Warranty Hard Drive
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 18
Synchronous (Maximum)
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,588
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 450GB 12G SAS
737394-B21
Capacity
450,098MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
HPE 300GB 12G SAS
737261-B21
Capacity
300,000MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(typical reads, including
settling)
15K rpm LFF (3.5-inch)
SC Converter Enterprise
3yr Warranty Hard Drive
(System Inlet Air
(typical reads, including
settling)
(Maximum)
15K rpm LFF (3.5-inch)
SC Converter Enterprise
3yr Warranty Hard Drive
(System Inlet Air
(Maximum)
(typical reads, including
settling)
(System Inlet Air
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 19
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the
controllers do not support boot volumes exceeding 2.2 TB.
HPE 6TB 12G SAS 7.2K
846514-B21
Capacity
6,001,175MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35° C)
HPE 6TB 6G SAS 7.2K
761477-B21
Capacity
6,001,175MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.25 ms
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
-priced reliability and performance for non-mission critical, low workload
following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array
rpm LFF (3.5in) SC
Midline 1yr Warranty
Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
(Maximum)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 20
(typical reads, including
Average
8.5 ms
Full-Stroke
22.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 4TB 6G SAS 7.2K
695510-B21
Capacity
4,000,787MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
7,814,037,168
Operating Temperature
50° to 95° F (10° to 35°
HPE 3TB 6G SAS 7.2K
652766-B21
Capacity
3,000,592MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.3 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
5,860,533,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 3TB 12G SAS 7.2K
846528-B21
Capacity
3,000,592MB
Height
1.06 in (26.8 mm)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
settling)
(System Inlet Air
C)
(typical reads, including
settling)
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
(System Inlet Air
Temperature)
C)
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
rpm LFF (3.5in) SC
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 21
Midline 1yr Warranty
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.32 ms
Average
7.45 ms
Full-Stroke
14.2 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
5,860,533,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 2TB 6G SAS 7.2K
652757-B21
Capacity
2,000,398MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
18.2 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
3,907,029,168
Operating Temperature
50° to 95° F (10° to 35°
HPE 1TB 6G SAS 7.2K
652753-B21
Capacity
1,000,204MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
18.2 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Hard Drive
(typical reads, including
settling)
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
(System Inlet Air
(typical reads, including
settling)
C)
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
(System Inlet Air
Temperature)
Synchronous (Maximum)
(typical reads, including
settling)
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 22
Logical Blocks
1,953,525,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 1TB 6G SATA 7.2K
861691-B21
Capacity
1,000,204MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.32 ms
Average
7.45 ms
Full-Stroke
14.2 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,953,525,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 4TB 12G SAS 7.2K
818367-B21
Capacity
4,000,787MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.8 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
7,814,037,168
Operating Temperature
(System Inlet Ai
Temperature)
50° to 95° F (10° to 35°
HPE 2TB 12G SAS 7.2K
818365-B21
Capacity
2,000,398MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
C)
rpm LFF (3.5in) SC
Midline 1yr Warranty
Hard Drive
(System Inlet Air
(Maximum)
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
C)
rpm LFF (3.5-inch) SC
Midline 1yr Warranty
Hard Drive
r
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 23
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.8 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
3,907,029,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Drives
Application
SAS 512e drives are intended for servers and storage solutions that are 4K aligned. These drives have
as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the
HPE 8TB 12G SAS 7.2K
819201-B21
Capacity
8,001,563MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
15,628,053,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(Maximum)
moderately-priced reliability and performance for non-mission critical, low workload applications, such
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
(typical reads, including
settling)
(System Inlet Air
C)
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array
controllers do not support boot volumes exceeding 2.2 TB.
rpm LFF (3.5in) 512e SC
Midline 1 yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 24
HPE 6TB 12G SAS 7.2K
765259-B21
Capacity
6,001,175MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 4TB 12G SAS 7.2K
Capacity
4,000,787MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
7,814,037,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Performance Drives
Application
SAS 512e Performance drives are intended for servers and storage solutions that are 4K aligned with
highest performance output in the Midline portfolio. These drives have moderately
and performance for non
reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm LFF (3.5-inch) SC
512e 1yr Warranty Hard
Drive
rpm LFF (3.5-inch) SC
512e 1yr Warranty Hard
Drive
765257-B21
(typical reads, including
settling)
(System Inlet Air
C)
(typical reads, including
settling)
(System Inlet Air
C)
-priced reliability
-mission critical, low workload applications, such as disk backup, archival, and
following controllers:
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 25
• HPE Smart Array P212 Controller
controllers do not support boot volumes exceeding 2.2 TB.
HPE 6TB 12G SAS 7.2K
793671-B21
Capacity
6,001,175MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12Gb/sec
Seek Time
Single Track
0.25 ms
Average
7.6 ms
Full-Stroke
15 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 4TB 12G SAS 7.2K
793669-B21
Capacity
4,000,787MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12Gb/sec
Seek Time
Single Track
0.25 ms
Average
7.6 ms
Full-Stroke
15 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
7,814,037,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Helium Drives
Application
Helium Drives are filled with Helium resulting in less power consumption. SAS 512e drives are
intended for servers and storage solutions that are 4K aligned. The drives have moderately
reliability and performance for non
archival, and reference applications.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array
rpm LFF (3.5-inch) SC
512e Performance 1yr
Warranty Hard Drive
rpm LFF (3.5-inch) SC
512e Performance 1yr
Warranty Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
(Maximum)
(typical reads, including
settling)
(System Inlet Air
-mission critical, low workload applications, such as disk backup,
C)
-priced
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 26
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be ne
down to an acceptable level for all components.
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the
controllers do not support boot volumes exceeding 2.2 TB.
HPE 10TB 12G SAS 7.2K
857644-B21
Capacity
10,000,831 MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.22 ms
Average
8.0 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
19,532,873,728
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 8TB 12G SAS 7.2K
861590-B21
Capacity
8,001,563MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.22 ms
Average
8.0 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
15,628,053,168
Operating Temperature
50° to 95° F (10° to 35°
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
gotiated
following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array
rpm LFF (3.5in) 512e SC
Midline 1yr Warranty
Hard Drive
rpm LFF (3.5in) 512e SC
Midline 1yr Warranty
Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
(typical reads, including
settling)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 27
(System Inlet Air
Temperature)
C)
HPE 6TB 12G SAS 7.2K
793699-B21
Capacity
6,001,175MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.25 ms
Average
8.5 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 8TB 12G SAS 7.2K
793703-B21
Capacity
8.001,563MB
Height
1.06 in (26.8 mm)
Width
4.16 in (105.8 mm)
Depth
6.69 in (170.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.25 ms
Average
8.5 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
15,628,053,168
Operating Temperature
50° to 95° F (10° to 35°
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 1.2TB 6G SAS 10K
718160-B21
Capacity
1,200,243MB
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm LFF (3.5-inch) SC
512e Helium 1yr
Warranty Hard Drive
rpm LFF (3.5-inch) SC
512e Helium 1yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
(typical reads, including
settling)
(System Inlet Air
Temperature)
C)
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 28
rpm SFF (2.5-inch) Dual
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.3 ms
Average
4.6 ms
Full-Stroke
8.9 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
2,344,225,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 900GB 6G SAS 10K
619291-B21
Capacity
900,185,481,216
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.21 ms
Average
3.57 ms
Full-Stroke
7.30 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,758,174,768
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 600GB 6G SAS 10K
581286-B21
Capacity
600,127,266,816
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.4 ms
Average
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Port Enterprise 3yr
Warranty Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
rpm SFF (2.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
rpm SFF (2.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
(Maximum)
C)
(typical reads, including
settling)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 29
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 450GB 6G SAS 10K
581284-B21
Capacity
450,098,159,616
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.4 ms
Average
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 300GB 6G SAS 10K
507127-B21
Capacity
300,000,000,000
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.20 ms
Average
4.0 ms
Full-Stroke
7.45 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 1.2TB 12G SAS 10K
785079-B21
Capacity
1,200,243MB
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(System Inlet Air
C)
rpm SFF (2.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
rpm SFF (2.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
rpm SFF (2.5-inch)
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 30
Seek Time
Single Track
0.10 ms
Average
3.7 ms
Full-Stroke
7.3 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
2,344,225,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 900GB 12G SAS
785075-B21
Capacity
900,185MB
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.10 ms
Average
3.5 ms
Full-Stroke
7.0 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,758,174,768
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 600GB 12G SAS
785073-B21
Capacity
600,127MB
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.11 ms
Average
3.3 ms
Full-Stroke
6.6 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
50° to 95° F (10° to 35°
HPE 300GB 12G SAS
785071-B21
Capacity
300,000MB
Height
0.63 in (16.0 mm)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
10K rpm SFF (2.5-inch)
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
(typical reads, including
settling)
C)
10K rpm SFF (2.5-inch)
Enterprise 3yr Warranty
Hard Drive
(System Inlet Air
(typical reads, including
settling)
(System Inlet Air
Temperature)
C)
C)
10K rpm SFF (2.5-inch)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 31
Enterprise 3yr Warranty
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.10 ms
Average
3.3 ms
Full-Stroke
6.7 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 300GB 6G SAS 15K
627117-B21
Capacity
300,000,000,000
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
Single Track
0.40 ms
Average
2.9 ms
Full-Stroke
5.30 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512 Logical Blocks
585,937,500
Operating Temperature
50° to 95° F (10° to 35°
HPE 146GB 6G SAS 15K
512547-B21
Capacity
146,815,737,856
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
6 Gb/sec
Seek Time
Single Track
0.4 ms
Average
3.0 ms
Full-Stroke
7.0 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
286,749,488
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Hard Drive
(typical reads, including
settling)
rpm SFF (2.5-inch) Hot
Plug Enterprise 3 yr
Warranty Hard Drive
(System Inlet Air
(typical reads, including
settling)
C)
rpm SFF (2.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
(System Inlet Air
Temperature)
Synchronous (Maximum)
(typical reads, including
settling)
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 32
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 600GB 12G SAS
785103-B21
Capacity
600,127MB
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
50° to 95° F (10° to 35°
HPE 450GB 12G SAS
785101-B21
Capacity
450,098MB
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 300GB 12G SAS
785099-B21
Capacity
300,000MB
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(System Inlet Air
C)
15K rpm SFF (2.5-inch)
Enterprise 3yr Warranty
Hard Drive
15K rpm SFF (2.5-inch)
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
Temperature)
C)
15K rpm SFF (2.5-inch)
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 33
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
HPE 600GB 6G SAS 15K
516828-B21
Capacity
600,127,266,816
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 450GB 6G SAS 15K
516816-B21
Capacity
450,098,159,616
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000rpm
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm LFF (3.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
and high transaction level applications.
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
(Maximum)
rpm LFF (3.5-inch) Dual
Port Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
(Maximum)
(typical reads, including
settling)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 34
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 600GB 12G SAS
737396-B21
Capacity
600,127MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.15ms
Average
2.9ms
Full-Stroke
5.9ms
Rotational Speed
15,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 450GB 12G SAS
737392-B21
Capacity
450,098MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 300GB 12G SAS
737390-B21
Capacity
300,000MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(System Inlet Air
C)
15K rpm LFF (3.5-inch)
CC Enterprise 3yr
Warranty Hard Drive
15K rpm LFF (3.5-inch)
CC Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
C)
15K rpm LFF (3.5-inch)
CC Enterprise 3yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 35
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.15 ms
Average
2.9 ms
Full-Stroke
5.9 ms
Rotational Speed
15,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 1TB 6G SAS 7.2K
605835-B21
Capacity
1,000,204,886,016
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.5 ms
Average
8.2ms
Full-Stroke
17.55 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512 Logical Blocks
976,773,168
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35°
HPE 500GB 6G SAS 7.2K
507610-B21
Capacity
500,107,862,016
Height
0.63 in (16.0 mm)
Width
3.1 in (78.7 mm)
Depth
5.45 in (138.4 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.5 ms
Average
8.2ms
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(Maximum)
rpm SFF (2.5-inch) Dual
Port Midline 1yr
Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
These drives have moderately-priced reliability and performance for non-mission critical, low workload
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
(Maximum)
C)
rpm SFF (2.5-inch) Dual
Port Midline 1yr
Warranty Hard Drive
(Maximum)
(typical reads, including
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 36
settling)
Full-Stroke
17.55 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
976,773,168
Operating Temperature
50° to 95° F (10° to 35°
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 6TB 6G SAS 7.2K
782669-B21
Capacity
6001175 MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6 Gb/sec
Seek Time
settling)
Single Track
0.25 ms
Average
8.5 ms
Full-Stroke
22.0 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
not support boot volumes exceeding 2.2 TB.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(System Inlet Air
Temperature)
C)
These drives have moderately-priced reliability and performance for non-mission critical, low workload
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm LFF (3.5-inch)
Midline 1yr Warranty
Hard Drive
(typical reads, including
(System Inlet Air
C)
Firmware version 5.0 or later is required for the following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume
using offline ACU version 8.75 or later. HPE Smart Array controllers do
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 37
HPE 4TB 6G SAS 7.2K
693689-B21
Capacity
4,000,787MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
7,814,037,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
not support boot volumes exceeding 2.2 TB.
HPE 3TB 6G SAS 7.2K
625031-B21
Capacity
3,000,592,982,016
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.5 ms
Average
<8.1 ms
Full-Stroke
15.5 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
5,860,533,168
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm LFF (3.5-inch)
Midline 1yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
C)
rpm LFF (3.5-inch)
Midline 1yr Warranty
Hard Drive
Firmware version 5.0 or later is required for the following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume
using offline ACU version 8.75 or later. HPE Smart Array controllers do
(Maximum)
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 38
Firmware version 5.0 or later is required for the following controllers:
To use har
using offline ACU version 8.75 or later.
not support boot volumes exceeding 2.2 TB.
HPE 2TB 6G SAS 7.2K
507616-B21
Capacity
2,000,398,934,016
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.5 ms
Average
8.5 ms
Full-Stroke
16.2 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
3,907,029,168
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35°
HPE 1TB 6G SAS 7.2K
507614-B21
Capacity
1,000,204,886,016
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.5 ms
Average
8.5 ms
Full-Stroke
16.2 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,953,525,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
C)
SAS Hot Plug LFF (3.5-inch) Midline (MDL) 512e Helium Drives
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
d drives exceeding 2.2 TB, you must create a boot volume
HPE Smart Array controllers do
rpm LFF (3.5-inch) Dual
Port Midline 1yr
Warranty Hard Drive
rpm LFF (3.5-inch) Dual
Port Midline 1yr
Warranty Hard Drive
(Maximum)
C)
(Maximum)
(typical reads, including
settling)
(System Inlet Air
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 39
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 6TB 12G SAS 7.2K
793697-B21
Capacity
6,001,175MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.25 ms
Average
8.5 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
11,721,045,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
not support boot volumes exceeding 2.2 TB.
HPE 8TB 12G SAS 7.2K
793701-B21
Capacity
8.001,563MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
12 Gb/sec
Seek Time
Single Track
0.25 ms
Average
8.5 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm LFF (3.5-inch) 512e
Helium 1yr Warranty
Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
Firmware version 5.0 or later is required for the following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume
using offline ACU version 8.75 or later. HPE Smart Array controllers do
rpm LFF (3.5-inch)
512e Helium 1yr
Warranty Hard Drive
C)
(typical reads, including
settling)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 40
Physical Configuration
Bytes/Sector
512
Logical Blocks
15,628,053,168
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
support boot volumes exceeding 2.2 TB.
HPE 10TB 12G SAS 7.2K
869347-B21
Capacity
10,000,831 MB
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
12 Gb/sec
Seek Time
Single Track
0.22 ms
Average
8.0 ms
Full-Stroke
16.0 ms
Rotational Speed
7200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
19,532,873,728
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
not support boot volumes exceeding 2.2 TB.
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
rpm LFF (3.5in) 512e
Midline 1yr Warranty
Hard Drive
(System Inlet Air
C)
Firmware version 5.0 or later is required for the following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HPE Smart Array controllers do not
(Maximum)
(typical reads, including
settling)
(System Inlet Air
Firmware version 5.0 or later is required for the following controllers:
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume
using offline ACU version 8.75 or later. HPE Smart Array controllers do
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 41
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 300GB 6G SAS 10K
537809-B21
Capacity
300,000,000,000
Height
0.591 in (15.00 mm)
Width
2.750 in (69.85 mm)
Depth
3.937 in (100.0 mm)
Interface
SAS
Transfer Rate
Synchronous
6 Gb/sec
Seek Time
Single Track
0.20 ms
Average
4.0 ms
Full-Stroke
7.45 ms
Rotational Speed
10,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 600GB 6G SAS 15K
516830-B21
Capacity
600,127,266,816
Height
1.028 in (26.1 mm)
Width
4.0 in (101.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6Gb/sec
Seek Time
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm SFF (2.5-inch) Nonhot Plug Dual Port
Enterprise 3yr Warranty
Hard Drive
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm LFF (3.5-inch) Nonhot Plug Dual Port
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 42
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
HPE 450GB 6G SAS 15K
516826-B21
Capacity
450,098,159,616
Height
1.028 in (26.1 mm)
Width
4.0 in (101.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6Gb/sec
Seek Time
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 1.2TB 6G SAS 10K
697572-B21
Capacity
1,200,243MB
Height
0.740 in (18.8 mm)
Width
2.909 in (73.9 mm)
Depth
3.945 in (100.2 mm)
Interface
SAS
Transfer Rate
Synchronous
6Gb/sec
Seek Time
Single Track
4.6ms
Average
8.9ms
Full-Stroke
8.0ms
Rotational Speed
10,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
2,344,225,968
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
(System Inlet Air
C)
rpm LFF (3.5-inch) Nonhot Plug Dual Port
Enterprise 3yr Warranty
Hard Drive
(typical reads, including
settling)
(System Inlet Air
C)
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
rpm SFF (2.5-inch)
Quick-release Dual Port
ENT 3y Warranty Hard
Drive
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
(Maximum)
(typical reads, including
settling)
(System Inlet Air
C)
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 43
HPE 300 GB 6G SAS 10K
574879-B21
Capacity
300,000,000,000
Height
0.740 in (18.8 mm)
Width
2.909 in (73.9 mm)
Depth
3.945 in (100.2 mm)
Interface
SAS
Transfer Rate
Synchronous
6Gb/sec
Seek Time
Single Track
0.3ms
Average
4.0ms
Full-Stroke
8.0ms
Rotational Speed
10,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
Temperature)
50° to 95° F (10° to 35°
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
and high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 600 GB 6G SAS 15K
574758-B21
Capacity
600,127,266,816
Height
1.165 in (29.6 mm)
Width
4.157 in (105.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35°
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
applications, such as disk backup, archival, and reference applications.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
SFF (2.5-inch) Quickrelease Dual Port ENT
3y Warranty Hard Drive
(typical reads, including
settling)
(System Inlet Air
(Maximum)
C)
LFF (3.5-inch) Quickrelease Dual Port ENT
3y Warranty Hard Drive
load intensive applications where 24/7 duty cycles are a requirement, such as database applications
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
C)
These drives have moderately-priced reliability and performance for non-mission critical, low workload
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 44
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
down to an acceptable level for all components.
HPE 4TB 6G SAS 7.2k
697956-B21
Capacity
4,000,787MB
Height
1.165 in (29.6 mm)
Width
4.157 in (105.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6Gb/sec
Seek Time
(typica
settling)
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
15.7 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
7,814,037,168
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35°
NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array
Firmware version 5.0 or later is required for the following controllers:
To use hard drives exceeding 2.2 TB, you must create a boot volume
using offline ACU version 8.75 or later.
not support boot volumes exceeding 2.2 TB.
HPE 2TB 6G SAS 7.2K
574761-B21
Capacity
2,000,398,934,016
Height
1.165 in (29.6 mm)
Width
4.157 in (105.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous (Maximum)
6Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.7 ms
Average
8.5 ms
Full-Stroke
18.2 ms
Rotational Speed
7,200 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
3,907,029,168
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
rpm LFF (3.5-inch)
Quick-release Dual Port
MDL 1y Warranty Hard
Drive
l reads, including
C)
• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller
rpm LFF (3.5-inch)
Quick-release Dual Port
MDL 1yr Warranty Hard
Drive
HPE Smart Array controllers do
QuickSpecs
HPE SAS Hard Drives
Technical Specifications
Page 45
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35°
Environment-friendly
End-of-life Management
and Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and
recycling programs, in many geographic areas, for our products. Products
returned to Hewlett Packard Enterprise will be recycled, recovered or
disposed of in a responsible manner.
http://www8.hp.com/us/en/hpe/hp
information/livingprogress/environmentalprogress/product
recycling.html#.V
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatmen
This information (product disassembly instructions) is posted on the
Hewlett Packard Enterprise web site. These instructions may be used by
recyclers and other WEEE treatment facilities a
Enterprise OEM customers who integrate and re
Enterprise equipment.
http:/
information/livingprogress/environmentalprogress/product
recycling.html#.V-lPA_krKiM
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
C)
Products and Approach
-
-
-lPA_krKiM
t information for each product type for use by treatment facilities.
s well as Hewlett Packard
-sell Hewlett Packard
/www8.hp.com/us/en/hpe/hp-
-
QuickSpecs
HPE SAS Hard Drives
Summary of Changes
Page 46
Date
Version History
Action
Description of Change
23-Oct-2017
From Version 55 to 56
Changed
Care Pack naming and Service and Support- Parts and
Materials updated.
28-Nov-2016
From Version 54 to 55
Added
Added new HDD offering.
Changed
Overview, Models, and Technical Specifications were revised.
Removed
Obsolete hard disk drives were removed from the QuickSpecs.
26-Sep-2016
From Version 53 to 54
Added
Added new SAS offering.
Warranty Hard Drive
06-Jun-2016
From Version 52 to 53
Added
HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr
Warranty Hard Drive was added to the QuickSpecs.
16-Feb-2016
From Version 51 to 52
Added
Added new SKUs 832514-B21, 818367-B21, and 818365B21 to the Models and Technical Specifications sections.
Changed
What’s New changed to:
Warranty Hard Drive
28-Sep-2015
From Version 50 to 51
Changed
12G SAS drives indicated transfer rate as 6Gb/sec. Changed
transfer rate to 12Gb/sec.
01-Jun-2015
From Version 49 to 50
Added
Updated What's New with the following information:
Models and Technical Specifications sections.
Changed
Service and Support section was revised.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HPE 3TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr
Warranty Hard Drive
HPE 1TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr
HPE 1TB 12G SAS 7.2K rpm SFF (2.5in) SC Midline 1yr
Warranty Hard Drive
HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr
Warranty Hard Drive
HPE 2TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr
HPE 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise
512e 3yr Warranty Hard Drive
HPE 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise
512e 3yr Warranty Hard Drive
HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) 512e Helium 1yr
Warranty Hard Drive
HPE 8TB 12G SAS 7.2K rpm LFF (3.5-inch) 512e Helium 1yr
Warranty Hard Drive
HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium
1yr Warranty Hard Drive
HPE 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium
1yr Warranty Hard Drive
Added part numbers 791034-B21, 748387-B21, 793703B21, 793699-B21, 793701-B21, and 793697-B21 to the
QuickSpecs
HPE SAS Hard Drives
Summary of Changes
Page 47
Removed
Obsolete SKUs 516814-B21 and 516824-B21 were
removed.
30-Mar-2015
From Version 48 to 49
Added
Added new SAS Hard Drives offering.
Changed
Overview and Technical Specifications were revised.
09-Feb-2015
From Version 47 to 48
Added
Updated What's New with the following information:
Models and Technical Specifications sections.
28-Aug-2014
From Version 46 to 47
Changed
Updated What's New with the following information:
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HPE 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e
1yr Warranty Hard Drive
HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e
1yr Warranty Hard Drive
HPE 1.2TB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
HPE 900GB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
HPE 600GB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
HPE 300GB 12G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
Added part numbers 781518-B21, 785069-B21, 781516B21, 785067-B21, 765259-B21, 765257-B21, 785079B21, 785075-B21, 785073-B21, and 785071-B21 to the
HPE 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter
Enterprise 3yr Warranty Hard Drive
HPE 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter
Enterprise 3yr Warranty Hard Drive
HPE 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter
Enterprise 3yr Warranty Hard Drive
HPE 300GB 12G SAS 15K rpm LFF (3.5-inch) CC Enterprise
3yr Warranty Hard Drive
QuickSpecs
HPE SAS Hard Drives
Summary of Changes
Page 48
HPE 450GB 12G SAS 15K rpm LFF (3.5-inch) CC Enterprise
Changes made in the Technical Specifications section.
18-Aug-2014
From Version 45 to 46
Changed
Models section was revised.
Removed
Removed HPE 600GB 6G SAS 10K rpm SFF (2.5-inch) Non-
and Technical Specifications sections.
07-Mar-2014
From Version 44 to 45
Changed
Changes were made throughout.
09-Dec-2013
From Version 43 to 44
Added
Updated What's New with the following information:
sections.
13-May-2013
From Version 42 to 43
Added
Updated What's New with the following information:
HPE 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
3yr Warranty Hard Drive
HPE 600GB 12G SAS 15K rpm LFF (3.5-inch) CC Enterprise
3yr Warranty Hard Drive
HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise
3yr Warranty Hard Drive
HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
HPE 450GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
HPE 600GB 12G SAS 15K rpm SFF (2.5-inch) Enterprise 3yr
Warranty Hard Drive
HPE 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr
Warranty Hard Drive
HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr
Warranty Hard Drive
HPE 6TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
Updated Models throughout the QuickSpecs.
hot Plug Dual Port Enterprise 3yr Warranty Hard Drive and
HPE 300GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release
Dual Port Enterprise 3yr Warranty Hard Drive from Models
HPE 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr
Warranty Hard Drive
Added part numbers 718162-B21, 718160-B21, and
718164-B21 to the Models and Technical Specifications
QuickSpecs
HPE SAS Hard Drives
Summary of Changes
Page 49
Warranty Hard Drive
sections.
19-Apr-2013
From Version 41 to 42
Changed
Changes made to the NOTES in the Models section.
12-Apr-2013
From Version 40 to 41
Added
Added new NOTES to the Models section.
19-Feb-2013
From Version 39 to 40
Added
Added part numbers 697574-B21, 693648-B21, and
sections.
26-Nov-2012
From Version 38 to 39
Added
Added missing sub-header in Overview section.
07-Nov-2012
From Version 37 to 38
Added
Added missing sub-header in Overview section.
06-Aug-2012
From Version 36 to 37
Removed
Removed HPE 72GB GG SAS 15K rpm Drive from Model
Technical Specifications section.
27-Jul-2012
From Version 35 to 36
Changed
Change made in Technical Specifications section.
11-May-2012
From Version 34 to 35
Changed
Changed "Smart Drive" to "SmartDrive" in the Models section.
06-Mar-2012
From Version 33 to 34
Changed
Models was updated. Note that the title has changed.
14-Nov-2011
From Version 32 to 33
Added
HPE 300GB 6G SAS 15K rpm SFF Hot Plug Enterprise Drive
was added.
04-Aug-2011
From Version 31 to 32
Changed
Description changes made in the Hard Drives section.
20-Jun-2011
From Version 29 to 31
Changed
Service and Support was completely revised and HPE 3TB 6G
SAS 7.2K rpm LFF Dual Port Midline Hard Drive was added.
09-May-2011
From Version 28 to 29
Added
Added new SKU to the Models and Technical Specifications
sections. Updated the Service and Support section.
05-Apr-2011
From Version 27 to 28
Added
HPE 1TB 6G SAS 7.2K rpm SFF Hot plug Midline 1yr
Warranty Hard Drive was added throughout.
14-Jan-2011
From Version 25 to 26
Changed
Change made in the North America and Canada versions only.
18-Nov-2010
From Version 24 to 25
Changed
Models were updated.
05-Oct-2010
From Version 23 to 24
Changed
Service and Support was completely revised.
29-Mar-2010
From Version 22 to 23
Added
HPE 450GB and 600GB 6G SAS 10K SFF (2.5-inch) Dual
LFF (3.5-inch) Midline (MDL) Drives.
16-Feb-2010
From Version 21 to 22
Changed
Hard drive descriptions were revised to reflect warranty
14-Sep-2009
From Version 20 to 21
Changed
Updated Models throughout the QuickSpecs.
14-Jul-2009
From Version 19 to 20
Changed
Changes made in the Models and Technical Specifications
sections.
13-Jul-2009
From Version 18 to 19
Added
SAS Hot Plug SFF Midline (MDL) Drives to the QuickSpecs
Specifications section.
02-Jun-2009
From Version 17 to 18
Added
Added the HPE 146GB and 72GB 6G SAS 15K SFF DP ENT
HDD to SAS Hot Plug SEE Enterprise (ENT) Drives and SAS
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HPE 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
HPE 4TB 6G SAS 7.2k LFF (3.5-inch) Quick-release Dual Port
MDL 1y Warranty Hard Drive
Added part numbers 695510-B21, 693689-B21, and
697956-B21 to the Models and Technical Specifications
697572-B21 to the Models and Technical Specifications
node. Removed HPE 72GB GG SAS 15K rpm Drive node from
Port Enterprise Hard Drives were added to SAS Hot Plug SFF
(2.5-inch) Enterprise (ENT) Drives, HPE 600GB 6G SAS 10K
SFF (2.5-inch) Non-Hot Plug Dual Port ENT Hard Drive was
added to SAS non-Hot Plug SF (2.5-inch) Enterprise (ENT)
Drives and 1TB and 2TB 6G SAS 7.2K rpm LFF (3.5-inch)
Dual Port Midline Hard Drives were added to SAS Hot Plug
information.
and Application, Warranty, Transfer Rate, 3G and 6G and
System Inlet Air Temperature throughout the Technical
QuickSpecs
HPE SAS Hard Drives
Summary of Changes
Page 50
Non-Hot Plug SEE Enterprise (ENT) Drives to Hard Drives
throughout the QuickSpecs.
27-Apr-2009
From Version 16 to 17
Changed
Changes made in the What's New, Models and Technical
Specifications sections.
30-Mar-2009
From Version 15 to 16
Added
Added the HPE 300GB 6G SAS 10K SFF DP ENT HDD, HPE
QuickSpecs.
10-Dec-2008
From Version 14 to 15
Changed
Change made in the North America and Canada versions only.
08-Dec-2008
From Version 13 to 14
Changed
Completely revised the Introduction in the Overview section
and Models throughout the QuickSpecs.
17-Nov-2008
From Version 12 to 13
Changed
There were changes made to the Standard Features and
Technical Specifications sections.
14-Jul-2008
From Version 11 to 12
Changed
The QuickSpecs was rewritten. NOTE that the title has
changed.
11-Feb-2008
From Version 10 to 11
Changed
Changes were made throughout the QuickSpecs.
23-Sep-2007
From Version 9 to 10
Changed
Corrected the name of one of the 3.5-inch drives in the
300-GB drive instead of 146-GB).
05-Sep-2007
From Version 8 to 9
Changed
Changes made throughout the QuickSpecs except for the
Service and Support section.
17-Jul-2007
From Version 7 to 8
Changed
Changes made to the Drive Quality section of Standard
Features only.
16-Jan-2007
From Version 6 to 7
Changed
Changes made within the OVERVIEW and TECHNICAL
14-Nov-2006
From Version 5 to 6
Changed
Changes made within the OVERVIEW and TECHNICAL
SPECIFICATIONS sections.
25-Sep-2006
From Version 4 to 5
Added
Added the HPE 146GB 3G SAS 10K SFF SP HDD Hard
Drives throughout the QuickSpecs.
23-Mar-2006
From Version 3 to 4
Added
"For hard drives, 1 GB = 1 billion bytes. Actual formatted
capacity is less." to the Copyright Notice.
03-Mar-2006
From Version 2 to 3
Changed
Changes made in the TECHNICAL SPECIFICATIONS section
only.
06-Feb-2006
From Version 1 to 2
Changed
In OVERVIEW and TECHNICAL SPECIFICATIONS, updated
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subjec
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered
trademark of Intel Corporati
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c04111744
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
146GB 6G SAS 10K SFF DP ENT HDD and HPE 146GB 3G
SAS 15K SFF DP ENT HDD Hard Drives throughout the
Technical Specifications section (was incorrectly listed as a
SPECIFICATIONS sections.
part number descriptions. Updated Copyright Notice.
t to change without notice. The only warranties for Hewlett Packard Enterprise products and
- 12244 - Worldwide - V56 - 23-October-2017
on.
warranty. Hewlett Packard Enterprise
QuickSpecs
HPE SAS Hard Drives
Summary of Changes
Page 51
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Loading...