HPE 652503-B21 Getting Started Guide

QuickSpecs
HPE Ethernet 10Gb SFP+ Adapters
HPE ProLiant DL, ML & Apollo

Overview

Page 1
HPE Ethernet 10Gb SFP+ Adapters
HPE ProLiant DL, ML & Apollo
The HPE Ethernet 10Gb Adapters are ideal for high performance computing, server virtualization, security, server consolidation, and other applications requiring highest throughput.
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters

Standard Features

Page 2
Recommended Models
HPE Ethernet 10Gb 2-port 530SFP Adapter
652503-B21
HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
700751-B21
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
727054-B21
HPE Ethernet 10Gb 2-port 562SFP+ Adapter
727055-B21
Kit Contents
SKU
652503-B21
700751-B21
727054-B21
727055-B21
Description
HPE Ethernet 10Gb 2-
HPE FlexFabric 10Gb
Adapter
HPE Ethernet 10Gb 2-
Adapter
Quick install card
Product warranty statement
Low profile bracket
Servers Support Table
SKU
652503-B21
700751-B21
727054-B21
727055-B21
Description
HPE Ethernet 10Gb 2-
HPE FlexFabric 10Gb
Adapter
HPE Ethernet 10Gb 2-
Adapter
HPE ProLiant DL20 Gen9
HPE ProLiant DL360 Gen9
HPE ProLiant DL380 Gen9
HPE ProLiant ML30 Gen9
HPE Apollo 4200 Gen9
HPE Apollo 6500 - XL270d Gen9
HPE ProLiant DL20 Gen10
√ √ √
HPE ProLiant DL120 Gen10
HPE ProLiant DL160 Gen10
√ √ √
HPE ProLiant DL180 Gen10
√ √ √
HPE ProLiant DL360 Gen10
√ √ √
HPE ProLiant DL380 Gen10
√ √ √
HPE ProLiant DL560 Gen10
√ √ √
HPE ProLiant DL580 Gen10
√ √ √
HPE ProLiant
√ √
HPE ProLiant
HPE
HPE ProLiant ML110 Gen10
HPE ProLiant ML350 Gen10
HPE Apollo 2000
√ √ √
HPE Apollo 2000 - XL190r Gen10
√ √ √
HPE Apollo 4500 - XL450 Gen10
√ √ √
HPE Apollo 6500 – XL270d Gen10
port 530SFP Adapter
2-port 534FLR-SFP+
port 562FLR-SFP+
HPE Ethernet 10Gb 2­port 562SFP+ Adapter
port 530SFP Adapter
2-port 534FLR-SFP+
port 562FLR-SFP+
HPE Ethernet 10Gb 2­port 562SFP+ Adapter
DL385 Gen10
DL325 Gen10
ProLiant ML30 Gen10
- XL170r Gen10
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo
Standard Features
Page 3
Standard Features Table
SKU
652503-B21
700751-B21
727054-B21
727055-B21
Description
HPE Ethernet 10Gb 2-
HPE FlexFabric 10Gb
Adapter
HPE Ethernet 10Gb 2-
Adapter
802.1Q VLANs
√ √
Audit Logs
Authenticated Updates
Checksum & Segmentation Offload
Configuration Utilities
Device-level Firewall
DPDK
*
HPE Sea Of Sensors 3D
HW Root of Trust
IPv6
iSCSI/FCoE
*
Management Support
Message Signaled Interrupt (Extended) (MSI-X)
Network AdapterTeaming
Network Partitioning (NPAR)
Optimized forVirtualization
LED Indicators
Preboot eXecution Environment (PXE)
RDMA
Receive Side Scaling (RSS)
Sanitization
Secure Boot
√ √ √
Server Integration
Single-Root I/O Virtualization
TCP/UDP/IP
TOE
√ √
Tunnel Offload
√- VXLAN / NVGRE
√- VXLAN / NVGRE
√- VXLAN / NVGRE
√- VXLAN / NVGRE
VMware NewQueue and Microsoft Virtual Machine Queue (VMQ)
Wake-on-LAN
(1Gb)
NOTE:*Storage personality must be disabled on NIC intended for DPDK workload. DPDK and Storage modes cannot be used concurrently on current generation CNA NICs. HPE Recommends using 2 separate NICS for Storage (Control Plane), and DPDK (Data Plane) workloads for the optimal high availability configuration
port 530SFP Adapter
2-port 534FLR-SFP+
port 562FLR-SFP+
HPE Ethernet 10Gb 2­port 562SFP+ Adapter
-Firmware
- Firmware
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo
Standard Features
Page 4
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be separated into multipl NICs for added network segmentation and enhanced security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance.
Active Health System
Supports HPE Active Health System
hardware and configuration enabling customers to
have accurate information that will assist in diagnosing problems and delivering rapid resolution when server failures occur.
Audit Logs
Audit Logs are a forensics capability that provides traceability into authenticated firmware updates by capturing changes in standard system logs.
Authenticated Updates
Authenticated Updates brings cryptographic keys onto the NIC (for HW Authentication) to protect user and configuration data from unauthorized access
Auto-negotiation
This adapter automatically senses the speed of the device to which it is attached. It also automatically configures for half or full duplex, depending on the duplex mode of the switch, hub, or
Checksum & Segmentation Offload
Normally the TCP Checksum is computed by the protocol stack. Segmentation Offload is technique for increasing outbound throughput of high
overhead. The technique is also called TCP segmentation offload (TSO)
when applied to TCP, or generic segmentation offload (GSO).
Configuration Utilities
This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations.
Device-level Firewall
Device
and configuration
data can only be accessed by authorized agents.
DMA Coalescing
Supports DMA Coalescing, the incoming data packets and interrupts associated with these DMA calls are intelligently batched to keep the system devices in lower power states.
DPDK
This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments.
Fibre Channel over Ethernet (FCoE)
Combines the functionality of an industry
proven Fibre Channel to seamlessly converge the traffic over
a shared lossless Ethernet network.
HPE Sea of Sensors3D Support for the HPE Sea of Sensors which is a collection of
across the server. When temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage. A significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling.
HW Root of Trust
Root of Trust enables a chain of trust for Authenticating updates to firmware via signature validation. This blocks installation of rogue or corrupted firmware and ensures that the executing firmware is trusted.
e virtual
- monitors and records changes in the server
and verify digitally signed firmware.
router connected to the adapter.
-bandwidth network connections by reducing CPU
-level Firewall blocks any unmanaged access to memory or storage. This ensures that on-device firmware
-standard NIC with an industry-
32 sensors that automatically track thermal activity - heat -
QuickSpecs
Adapters
HPE ProLiant DL, ML & Apollo
Standard Features
Page 5
Interrupt Coalescing
Interrupt coalescing (interrupt moderation) groups multiple packets, thereby reducing the number of interrupts sent to the host. This process optimizes host efficiency, leaving the CPU available for other duties.
IPv6
IPv6 uses 128
iWARP
Delivers RDMA on top of the pervasive TCP/IP protocol. iWARP RDMA runs over standard network and transport layers and works with all Ethernet network infrastructure. TCP provides flow control and congestion management and does not require a lossless Ethern
Jumbo Frames This adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,600 byte (KB) transmission unit (MTU) when running Ethernet I/O traffic.
byte Ethernet frame. With Jumbo Frames, networks can achieve higher throughput performance and greater CPU utilization. These attributes are particularly useful for database transfer and tape backup opera
LED Indicators LED indicators show link integrity and network activity for easy troubleshooting.
Load Balancing Transmit Load Balancing (TLB) and Switch-assisted Load Balancing (SLB) are two advanced features that customers can use to build a bigger pipe for improved networking bandwidth. These port
port HPE
361T adapters (total of 8 ports) in a HPE ProLiant server and aggregate their throughput up to a theoretical maximum of 16 Gi
its
per second full
Message Signaled Interrupt (Extended)(MSI-X) Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs/cores.
Network Adapter Teaming This adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs.
Network Fault Tolerance (NFT) Network Fault Tolerance, sometimes called "failover" or "NIC Redundancy," allows for the installation of multiple server adapters so that the active device can be backed up by a redundant adapter to improve availability. The Hewlett Packard Enterprise teaming utility also allows users to specify that when a failed adapter is fixed and replaced, the original adapter resumes its function as the primary network connection.
Network Partitioning (NPAR)
This adapter supports Network Partitioning (NPAR) allowing administrators to configure a 10 Gb port as four separate partitions or physical functions. Each PCI function is associated with a different virtual NIC. To the OS and the network, each physical function appears as a separate NIC port.
Optimized for Virtualization I/O Virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads.
Preboot eXecution Environment (PXE) Support for PXE enables automatic deployment of computing resources remotely from anywhere. It allows a new or existing server to boot over the network and download software, including the operating system, from a management/ deployment server at another l Additionally, PXE enables decentralized software distribution and remote troubleshooting and repairs.
-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit addressing.
et network. iWARP is a highly routable and scalable RDMA implementation.
This is over five times the size of a standard 1500-
tions.
HPE Ethernet 10Gb SFP+
-bonding techniques enable users to install up to four dual­gab
-duplex transmissions.
ocation on the network.
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo
Standard Features
Page 6
Precision Time Protocol (IEEE 1588 PTP) Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems.
RDMA
Remote Direct memory Access (RDMA)
allows data to be transferred directly from the user memory of the source server to the user memory of the destination server bypassing the operating system (OS) kernel. Because the RDMA data transfer is performed by the DMA engine on the adapter's network processor, the CPU is not used for the data movement, freeing it to perform other tasks such as hosting more virtual workloads (increased VM density). RDMA protocols include
RoCEv1, RoCEv2 and
deliver accelerated performance for applications such as
Microsoft Hyper
Receive Flow Steering (RFS)
Receive Flow Steering (RFS) acceleration improves processing efficiency by steering received packets to the CPU core that is running the application that consumes those packets. Aligning I/O processing to the CPU core running the application improves cache efficiency, CPU utilization, throughput and latency.
Receive Side Scaling (RSS)
RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors. RSS enables packet receive
Sanitization
Sanitization (Secure User Data Erase) renders User and configuration data on the NIC irretrievable so that NICs can be safely repurposed or disposed.
Secure Boot
Secure Boot safeguards the system and ensures no rogue drivers are being executed on start-up.
 is an accelerated I/O delivery mechanism that
iWARP. All of these protocols reduce overall latency to
-V Live Migration, Microsoft SQL and Microsoft SharePoint with SMB Direct..
-processing to scale with the number of available processors.
QuickSpecs
Adapters
HPE ProLiant DL, ML & Apollo
Standard Features
Page 7
Server Integration
This adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant servers. Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems Insight Manager that simplify network management. This approach provides a more robust and reliable networking solution than offerings from other vendors and provides users with a single point of contact for both their servers and their network adapters.
Single-Root I/O Virtualization
Single
IOV) provides a mechanism to bypass the host system hypervisor in virtual environments providing
near metal performance and server efficiency. SR
single
PCIe resources. The device is capable of SR
TCP/UDP/IP
For overall improved system response, this adapter supports standard TCP/IP offloading techniques including: TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter. Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be handled by the adapter rather than the CPU.
TOE
TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to the adapter's processor, freeing server CPU cycles for other operations.
Tunnel Offload
Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN, NVGRE and GENEVE. By offloading packet processing to adapters, customers can use overlay networking to increase VM migration flexibility and virtualized overlay networks with minimal impact to performance. HPE Tunnel Offloading increases I/O throughput, reduces CPU utilization, and lowers power consumption. Tunnel Offload supports VMware's VXLAN, Microsoft's NVGRE solutions and Generic Network Virtualization Encapsulation (GENEVE) solutions.
VMware NewQueue and Microsoft Virtual Machine Queue (VMQ) VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network adapters in virtualized environments. Windows Hyper
enabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an external virtual machine network directly to virtual machines, which reduces the overhead of routing packets and copying them from the management operating system to the virtual machine.
Wake-on-LAN This adapter provides Wake
LAN cfaan remain available to the systems administrator during its normal downtime. Once the machine is awakened, the systems administrator can remotely control, audit, debug, or manage the machine.
Warranty Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three Minimum: One year limited warranty.
NOTE:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/index.aspx#.V4e3tPkrJhE
-Root I/O Virtualization (SR-
HPE Ethernet 10Gb SFP+
-IOV provides mechanism to create multiple Virtual Functions (VFs) to share
-IOV, and requires Server BIOS support, controller firmware, and OS support.
-V VMQ (VMQ) is a feature available on servers running Windows Server 2008 R2 with VMQ-
-on-LAN (WoL) support through the PCI Express bus. A system that supports Wake-on-
-year, limited warranty).
Additional information regarding worldwide limited warranty and technical support is available at:
QuickSpecs
HPE 10Gb Standup Adapters
HPE ProLiant DL, ML & Apollo

Service and Support

Page 8
Service and Support
NOTE: This adapter is covered under HPE Support Services/ Service Contract applied to the HPE ProLiant Server or enclosure. No
separate HPE Support Services need
Most HPE branded options sourced from HPE that are compatible with your product will be covered under your main product support at the same level of coverage, allowing you to upgrade freely. Additional support is required on select workload accelerators, switches, racks and UPS options 12KVA and over. Coverage of the UPS battery is not included under HPE support services; standard warranty terms and conditions apply.
Warranty and Support Services
Warranty and Support Services will extend to include HPE options configured with your server or storage device. The price of support service is not impacted by configuration details. HPE sourced options that are compatible with your product will be covered under your server support at the same level of coverage allowing you to upgrade freely. Installation for HPE options is available as needed. To keep support costs low for everyone, some high value options will require additional support. Additional support is only required on select high value workload accelerators, fibre switches, InfiniBand and UPS options 12KVA and over. Coverage of the UPS battery is not included under TS support services; standard warranty terms and conditions apply.
Protect your business beyond warranty with HPE Support Services
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to HPE to help prevent problems and solve issues faster. HPE Support Services enable you to choose the right service level, length of coverage and response time as you purchase your new server, giving you full entitlement to the support you need for your IT and business. Protect your product, beyond warranty.
Parts and Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements. Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
s replaced
by Hewlett Packard Enterprise due to malfunction.
For more information Visit the Hewlett Packard Enterprise Service and Support website.
Parts and Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
the covered hardware product in operating condition, including parts and materials for available
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
specs, or the technical
eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
to be purchased.
part of these services. The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drive
maintain and recommended engineering improvements.
limitations as set forth in the manufacturer's operating manual, product quick­product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo

Technical Specifications

Page 9
Technical Specifications Table
SKU
652503-B21
700751-B21
727054-B21
727055-B21
Description
HPE Ethernet 10Gb 2-port
HPE FlexFabric 10Gb 2-
Adapter
HPE
port
port
Network Processor
Cavium 57810S
Cavium 57810S
Intel® X710 Controller
Intel® Ethernet Converged
Intel® X710 Controller
Intel® Ethernet Converged
Data Rate
2 port, each at 20 Gb bi-
directional per adapter
2 port, each at 20 Gb bi-
directional per adapter
2 port, each at 20 Gb bi-
directional per adapter
2 port, each at 20 Gb bi-
directional per adapter
Bus Type
PCIe 2.0X8
PCIe 2.0X8
PCIe 3.0 x8
PCIe 3.0 x8
Form Factor
Stand up
FlexibleLOM
FlexibleLOM
Stand up
Power
9W max
9W max
<12W
<12W
IEEE Compliance
802.3, 802.3ae, 802.3x,
802.2x, 802.3ad, 802.1Qaz,
802.1ax, 1588
802.3, 802.3ae, 802.3x,
802.1Qbg, 802.1ax,1588
802.3, 802.1ab, 802.3x,
802.3, 802.1ab, 802.3x,
Jumbo Frames
9,000 KB
9,000 KB
9,500 KB
9,500 KB
Temperature
Operating 0° to 55°C (32° to 131°F)
Humidity
Operating 10% to 90% non-condensing
Operating System and Virtualization Support
The Operating Systems supported by this adapter are based on the server OS support. Please refer to the OS Support Matrix at https://www.hpe.com/us/en/servers/server-operating-systems.html
Related Option
Please refer to link for supported cables and transceivers. - Link
Environment-friendly Products and Approach - End-of-life Management and Recycling
Hewlett Packard Enterprise offers end
, in many geographic areas, for our
products. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE Directive (2012/19/EU) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the
These instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
530SFP Adapter
FastLinQ 3400
directional, 40 Gb bi-
802.1Qau,
802.1Qbb,802.1Qbg,
port 534FLR-SFP+
Ethernet 10Gb 2-
562FLR-SFP+ Adapter
FastLinQ 8400
Network Adapter X710-
DA2
directional, 40 Gb bi-
802.2x, 802.3ad,
802.1Qaz, 802.1Qau,
directional, 40 Gb bi-
802.3ad, 802.1p/ 802.1q,
802.3ae, 802.1Qau,1588
802.1Qbb,
Non-Operating -65° to 85° C (-85° to 185° F)
HPE Ethernet 10Gb 2-
562SFP+ Adapter
Network Adapter X710-
DA2
directional, 40 Gb bi-
802.3ad, 802.1p/ 802.1q,
802.3ae, 802.1Qau, 1588
Non-operating 5% to 95% non-condensing
-of-life product return, trade-in, and recycling programs
Hewlett Packard Enterprise web site.
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo
Technical Specifications
Page 10
Extended Models
Models
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
665243-B21
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
665249-B21
SKU
665243-B21
665249-B21
Description
HPE Ethernet 10Gb 2-port 560FLR-SFP+
Adapter
Quick install card
Product warranty statement
Low profile bracket √
SKU
665243-B21
665249-B21
Description
HPE Ethernet 10Gb 2-port 560FLR-SFP+
Adapter
HPE ProLiant DL20 Gen9
HPE ProLiant DL360 Gen9
HPE ProLiant DL380 Gen9
HPE Apollo 4200 Gen9
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo
Technical Specifications
Page 11
SKU
665243-B21
665249-B21
Description
HPE Ethernet 10Gb 2-port 560FLR-SFP+
Adapter
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
802.1Q VLANs
Audit Logs
Authenticated Updates
Checksum & Segmentation Offload
√ √
Configuration Utilities
Device-level Firewall
DPDK
√ √
HPE Sea Of Sensors 3D
HW Root of Trust
IPv6
iSCSI/FCoE
Management Support
Message Signaled Interrupt (Extended) (MSI-X)
Network AdapterTeaming
Network Partitioning (NPAR)
Optimized forVirtualization
LED Indicators
Preboot eXecution Environment (PXE)
RDMA
Receive Side Scaling (RSS)
√ √
Sanitization
Secure Boot
Server Integration
Single-Root I/O Virtualization
√ √
TCP/UDP/IP
TOE
Tunnel Offload
VMware NewQueue and Microsoft Virtual Machine Queue (VMQ)
Wake-on-LAN
NOTE:*Storage personality must be disabled on NIC intended for DPDK workload. DPDK and Storage modes cannot be used
concurrently on current generation CNA NICs. HPE Recommends using 2 separate NICS for Storage (Control Plane), and DPDK (Data Plane) workloads for the optimal high availability configuration
1Gb
QuickSpecs
HPE Ethernet 10Gb SFP+
Adapters
HPE ProLiant DL, ML & Apollo
Technical Specifications
Page 12
SKU
665243-B21
665249-B21
Description
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HPE Ethernet 10Gb 2-port 560SFP+ Adapter
Network Processor
Intel® 82599 Controller
DA2
Intel® 82599 Controller
DA2
Data Rate
2 port, each at 20 Gb bi-directional, 40 Gb bi-
2 port, each at 20 Gb bi-directional, 40 Gb bi-
Bus Type
PCIe 2.0X8
PCIe 2.0X8
Form Factor
FlexibleLOM
Stand up
Power
<12W
<12W
IEEE Compliance
802.3, 802.1ab, 802.3x, 802.3ad, 802.1p/ 802.1q,
802.3, 802.1ab, 802.3x, 802.3ad, 802.1p/ 802.1q,
Jumbo Frames
9,500 KB
9,500 KB
Temperature
Operating 0° to 55°C (32° to 131°F)
Non-Operating
Humidity
Operating 10% to 90% non-condensing
Non-operating
Intel® Ethernet Converged Network Adapter X520-
directional per adapter
802.3ae, 802.1Qau, 1588
Intel® Ethernet Converged Network Adapter X520-
directional per adapter
802.3ae, 802.1Qau, 1588
-65° to 85° C (-85° to 185° F)
5% to 95% non-condensing
QuickSpecs
HPE 10Gb Standup Adapters
HPE ProLiant DL, ML & Apollo

Summary of Changes

Page 13
Date
Version History
Action
Description of Change
01-Oct-2018
Version 2
Changed
Platform Information & Standard Features sections were updated
13-Aug-2018
Version 1
New
New QuickSpecs
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development L.P. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements acc construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
a00047734enw
ompanying such products and services. Nothing herein should be
- 16271 - Worldwide - V2 - 1-October-2018
Loading...