HP USB CardBus User Manual

w
HP 2 Port USB 2.0 Cardbus User’s Manual
Product Number PM453A #ABA Printed in China
©Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice The only warranties for HP products and services are set forth in the express
arranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Product Registration
Registration is quick, easy and offers: Email updates containing notifications about product enhancements, the most recent support alerts, and driver updates specific to the product(s) you own.
For faster help, be sure to register your recently purchased product at http://www.microinv.com/hp/register.cfm
Contents
Welcome 4 Installation 5 Technical Support 5
- 3 -
Welcome
Congratulations on the purchase of your new HP 2 Port USB 2.0 Cardbus. This guide will provide you the necessary steps to installing and maintaining your cardbus.
Package Contents
2 Port USB 2.0 Cardbus
User’s Manual Warranty Card
System Requirements
Available Cardbus slot
Compatible with Microsoft® Windows® 2000/XP
AC Adapter
- 4 -
Installation
STEP 1 – Turn on your computer and wait for it to boot up.
STEP 2 – Carefully insert the HP 2 Port USB 2.0 Cardbus into an available Cardbus slot.
STEP 3 – The appropriate drivers for your device will automatically be installed.
Technical Support
For technical assistance call 1-866-314-7239 or visit www.microinv.com/hp Technical Support hours of operation: Monday - Friday 8:30am to 10:00pm E.S.T.
- 5 -
FCC STATEMENT
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Hewlett-Packard is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.
For regulatory compliance information only, contact:
Hardware Quality Eng. Manager Hewlett-Packard Company - CPC 10500 Ridgeview Court Cupertino, CA95014
Telephone: 1(408) 343-5000
Tested To Comply With FCC Standards FOR HOME OR OFFICE USE
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.
Loading...