This guide focuses on the Omnibook XE4500, technology code KB—even though user
information is also included for the Omnibook XE4100, technolofy code KC. The
technology code is shown on the serial-number label on the bottom of the computer, and
it is also included in the BIOS version number. Information about models with other
technology codes may be available in other guides.
This manual and any examples contained herein are provided “as is” and are subject to
change without notice. Hewlett-Packard Company makes no warranty of any kind with
regard to this manual, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard Co. shall not be
liable for any errors or for incidental or consequential damages in connection with the
furnishing, performance, or use of this manual or the examples herein.
Consumer transactions in Australia and the United Kingdom: The above disclaimers and
limitations shall not apply to Consumer transactions in Australia and the United Kingdom
and shall not affect the statutory rights of Consumers.
The programs that control this product are copyrighted and all rights are reserved.
Reproduction, adaptation, or translation of those programs without prior written
permission of Hewlett-Packard Co. is also prohibited.
Portions of the programs that control this product may also be copyrighted by Microsoft
Corporation, Phoenix Technologies, Ltd., ATI Technologies Inc., S3 Graphics
Incorporated, Intel Corporation, and Adobe Systems Incorporated. See the individual
programs for additional copyright notices.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Microsoft®, MS-DOS®, and Windows® are U.S. registered trademarks of Microsoft
Corporation. Pentium® and the Intel Inside logo are U.S. registered trademarks and
Celeron™ and SpeedStep™ are U.S. trademarks of Intel Corporation. Adobe® and
Acrobat® are trademarks of Adobe Systems Incorporated.
Hewlett-Packard Company
HP Notebook Customer Care
1000 NE Circle Blvd., MS 425E
Corvallis, OR 97330
2Corporate Evaluator’s Guide
Important Safety Information
CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line
cord to connect a modem to the telephone wall jack. In Australia, the computer
must be connected to the Telecommunication Network through a line cord that
meets the requirements of ACA Technical Standard TS008.
When using your computer with a telephone connection, always follow basic safety
precautions to reduce the risk of fire, electric shock, and injury to persons:
• Do not use this product with a telephone connection near water (for example, near a
bathtub, sink, swimming pool, or in a wet basement).
• Avoid using a telephone connection (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
• Do not use a telephone connection to report a gas leak in the vicinity of the leak.
• Use only the power cord and batteries indicated in this manual. Do not dispose of
batteries in a fire. They may explode. Check with local codes for possible special
disposal instructions.
HP Software Product License Agreement
Your HP product contains software programs. CAREFULLY READ THIS LICENSE
AGREEMENT BEFORE PROCEEDING TO OPERATE THIS EQUIPMENT. RIGHTS
IN THE SOFTWARE ARE OFFEREDONLY ON THE CONDITION THAT THE
CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THE LICENSE
AGREEMENT. PROCEEDING TO OPERATE THE EQUIPMENT INDICATES
YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT
AGREE WITH THE TERMS OF THE LICENSE AGREEMENT, YOU MUST NOW
EITHER REMOVE THE SOFTWARE FROM YOUR HARD DISK DRIVE AND
DESTROY THE MASTER DISKETTES, OR RETURN THE COMPLETE HP
PRODUCT AND SOFTWARE FOR A FULL REFUND. PROCEEDING WITH
CONFIGURATION SIGNIFIES YOUR ACCEPTANCE OF THE LICENSE TERMS.
UNLESS OTHERWISE STATED BELOW, THIS HP SOFTWARE LICENSE
AGREEMENT SHALL GOVERN THE USE OF ALL SOFTWARE THAT IS
PROVIDED TO YOU AS PART OF THE HP PRODUCT AND SHALL SUPERSEDE
ANY OTHER SOFTWARE WARRANTY STATEMENT THAT MAY BE INCLUDED
IN THIS HP PRODUCT OR MAY BE FOUND ONLINE.
Operating system and software applications by Microsoft are licensed to you under the
Microsoft License Agreement contained in the Microsoft documentation or displayed on
your screen when Microsoft Software Products are launched.
Corporate Evaluator’s Guide3
For a PC supplied with a Microsoft operating system: When you start the PC and accept
the Microsoft End-user License Agreement (“EULA”), your license rights are valid only
if a Certificate of Authenticity (“COA”) label corresponding to your Microsoft operating
system is provided with your PC. The COA label can usually be found on the bottom of
the computer. If the COA label does not correspond to your Microsoft operating system
or is missing, contact your HP reseller for details.
Other non-HP Software and Operating Systems are covered by the appropriate vendor
license. The following License Terms govern the use of the HP software:
USE. Customer may use the software on any one HP product. Customer may not network
the software or otherwise use it on more than one HP product. Customer may not reverse
assemble or decompile the software unless authorized by law.
COPIES AND ADAPTATIONS. Customer may make copies or adaptations of the
software a) for archival purposes or (b) when copying or adaptation is an essential step in
the use of the software with an HP product so long as the copies and adaptations are used
in no other manner.
OWNERSHIP. Customer agrees that he/she does not have any title or ownership of the
software, other than ownership of the physical media. Customer acknowledges and
agrees that the software is copyrighted and protected under the copyright laws. Customer
acknowledges and agrees that the software may have been developed by a third party
software supplier named in the copyright notices included with the software, who shall be
authorized to hold the Customer responsible for any copyright infringement or violation
of this Agreement.
PRODUCT RECOVERY CD-ROM or DVD. If your HP product was shipped with a
product recovery CD-ROM or DVD: (i) The product recovery CD-ROM or DVD and/or
support utility software may only be used for restoring the hard disk of the HP product
with which the product recovery CD-ROM or DVD was originally provided. (ii) The use
of any operating system software by Microsoft contained in any such product recovery
CD-ROM or DVD shall be governed by the Microsoft License Agreement.
TRANSFER OF RIGHTS IN SOFTWARE. Customer may transfer rights in the software
to a third party only as part of the transfer of all rights and only if Customer obtains the
prior agreement of the third party to be bound by the terms of this License Agreement.
Upon such a transfer, Customer agrees that his/her rights in the software are terminated
and that he/she will either destroy his/her copies and adaptations or deliver them to the
third party.
SUBLICENSING AND DISTRIBUTION. Customer may not lease, sublicense the
software or distribute copies or adaptations of the software to the public in physical
media or by telecommunication without the prior written consent of Hewlett-Packard.
TERMINATION. Hewlett-Packard may terminate this software license for failure to
comply with any of these terms provided Hewlett-Packard has requested Customer to
cure the failure and Customer has failed to do so within thirty (30) days of such notice.
UPDATES AND UPGRADES. Customer agrees that the software does not include
updates and upgrades which may be available from Hewlett-Packard under a separate
support agreement.
4Corporate Evaluator’s Guide
EXPORT CLAUSE. Customer agrees not to export or re-export the software or any copy
or adaptation in violation of the U.S. Export Administration regulations or other
applicable regulation.
U.S. GOVERNMENT RESTRICTED RIGHTS. Use, duplication, or disclosure is subject
to HP standard commercial license terms and for non-DOD Departments and Agencies of
the U.S. Government, the restrictions set forth in FAR 52.227-19(c)(1-2) (June 1987)
Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, CA 94304 U.S.A. Copyright
(c) 2000 Hewlett-Packard Company. All Rights Reserved. Customer further agrees that
Software is delivered and licensed as “Commercial computer software” as defined in
DFARS 252-227-7014 (June 1995) or as a “commercial item” as defined in FAR
2.101(a), or as “Restricted computer software” as defined in FAR 52.227-19 (or any
equivalent agency regulation or contract clause), whichever is applicable. The Customer
agrees that it has only those rights provided for such Software by the applicable FAR or
DFARS clause or the HP standard software agreement for the product involved.
Support Policy for Microsoft Operating Systems Service Pack. HP will provide end user
support for HP PCs that use Microsoft Operating Systems, including its latest service
packs. This support will be available 30 days after the service pack being released by
Microsoft.
Edition History
Edition 1 (KB).......................................... May 2002
This manual is printed on recycled paper.
Corporate Evaluator’s Guide5
Contents
Getting Started with Your HP Notebook ..................................................................... 12
Index ..............................................................................................................................187
Corporate Evaluator’s Guide11
Getting Started with Your HP Notebook
Corporate Evaluator’s Guide12
Taking Inventory
Congratulations! Your notebook computer sets a new standard in personal computing.
Although compact and easy to carry, your computer is made with the quality and
attention to detail that are the hallmark of Hewlett-Packard.
This manual shows how to set up and operate your computer, as well as what to do if you
run into trouble.
What’s in the box?
• HP notebook PC.
• Battery (installed).
• AC adapter and power cord.
• Quick Start sheet.
Getting Started with Your HP Notebook
Taking Inventory
• Startup Guide.
• Recovery CD or DVD, for restoring Windows and all software included with your
computer.
• Microsoft Windows manual.
• CD with special software (for models with certain types of drives).
In addition, your HP notebook includes preinstalled software. (The exact software
installed depends on your particular notebook model.)
To buy accessories
You can buy accessories for your computer online. For the latest accessories and options,
visit the HP Notebook Web site (www.hp.com/notebooks).
HP currently offers accessories, such as the following:
• AC adapter.
• Replacement hard disk drive module.
Corporate Evaluator’s Guide13
Getting Started with Your HP Notebook
Taking Inventory
• RAM modules for expanding memory.
• Battery.
• Port replicator.
To find more information
The following table lists other sources of information about your computer and related
products.
SourceDescription and Location
Startup Guide
Online
Reference
Guide
Online HP NotesFor late-breaking information available after the manuals were completed, see the
Microsoft Windows
manual
HP Notebook Web
Site
HP Business
Support Web Site
Corporate
Evaluator’s Guide
This printed manual introduces your computer. It also contains setup instructions,
basic operation guidelines, troubleshooting information, and warranty information.
The full
complete source for operating and maintaining the computer. Look in the online HP
Library, or on the
Library is in the Help and Support Center.
HP Notes in the online HP Library, or on the
This is shipped with your computer and contains information about using the version
of Microsoft Windows shipped with your computer.
www.hp.com/notebooks
This provides information about installing alternate operating systems, as well as
how to configure your notebook computer in a corporate, networked environment.
Located at the HP Business Support Web site.
Reference Guide
Recovery CD
is shipped on the computer’s hard drive, and provides a
or
DVD
in \hp\Library. For Windows XP, the HP
Recovery CD
or
DVD
in \hp\Library.
14Corporate Evaluator’s Guide
Identifying Parts of the Computer
Front View
Getting Started with Your HP Notebook
Identifying Parts of the Computer
1. Computer open/close latch.
2. One-Touch buttons.
3. Keyboard status lights.
4. Power button. Turns the computer on and off.
5. Touch pad, scroll pad, click buttons, plus on-off
button.
6. Main status lights (left to right): power mode,
battery, hard disk activity.
7. Built-in microphone*.
8. Infrared port*.
9. Wireless on-off button and indicator light*.
10. Battery.
11. CD-ROM, DVD, or other drive.
12. PS/2 keyboard or PS/2 mouse port (supports Y
adapter).
* on certain models
Corporate Evaluator’s Guide15
Getting Started with Your HP Notebook
Identifying Parts of the Computer
Back View
13. AC adapter jack.
14. Two universal serial bus ports (USB).
15. LAN port*.
16. S-video port*.
17. Parallel port (LPT1). Use this port for a parallel
printer or other parallel device.
18. Serial port (COM1). Use this port for a serial
mouse, modem, printer, or other serial device.
19. External monitor port.
20. Kensington lock slot (security connector).
16Corporate Evaluator’s Guide
21. Modem port*.
22. PC Card and CardBus slot and button (certain
models have two slots and two buttons).
23. IEEE 1394 port*.
24. Audio jacks (left to right): audio out (headphones),
external microphone.
25. Volume control*.
26. Audio mute button and audio mute light*.
27. Floppy disk drive*.
* on certain models
Bottom View
Getting Started with Your HP Notebook
Identifying Parts of the Computer
28. Hard disk drive.
29. Battery latch.
30. RAM cover.
31. Reset button.
32. Docking port*.
33. Mini-PCI cover (no user parts inside).
* on certain models
Corporate Evaluator’s Guide17
Getting Started with Your HP Notebook
Identifying Parts of the Computer
Status Lights
The computer includes a number of status lights that report power and battery status,
drive activity, and keyboard functions such as Caps Lock and Num Lock.
The following diagram shows the main status lights on the front of the computer.
1. Power mode.
• On: the computer is on (even if the display is off).
• Blinking: the computer is in Standby mode.
• Off: the computer is off or in Hibernate mode.
2. Hard disk drive activity .
• On: computer is accessing the hard disk drive.
3. Battery status.
• Green: the AC adapter is connected and the battery is fully charged.
• Amber: the AC adapter is connected and the battery is charging.
• Blinking: the AC adapter is connected and the battery is missing or has a fault.
• Off: the AC adapter is not connected.
18Corporate Evaluator’s Guide
Getting Started with Your HP Notebook
Identifying Parts of the Computer
The keyboard status lights, located above the keyboard, indicate the states of the
keyboard locks.
1. Caps Lock. Caps Lock is active.
2. Num Lock. Num Lock is active. (The Keypad Lock must also be on to use the
embedded keypad.)
3. Keypad Lock. The embedded keypad is active (Fn+F8). Num Lock must also be on
for the numeric keys—otherwise, cursor control is active (as marked on an external
keyboard).
Corporate Evaluator’s Guide19
Getting Started with Your HP Notebook
Setting Up Your Computer
Setting Up Your Computer
WARNING
WARNING
Improper use of keyboards and other input devices has been associated with
ergonomic injury. For information about reducing your risk, see Working in
Comfort in the online HP Library, or visit our ergonomics Web site,
www.hp.com/ergo. For a summary about working with a notebook computer, see
“Working in Comfort with a Notebook PC” on page 45.
If you are using your notebook computer as your primary computer, or using it for
extended periods, you should use it with a full-size keyboard, monitor, and mouse.
HP docking accessories offer quick, easy connections to these devices. This can
reduce the risk of ergonomic injury. See Working in Comfort in the online HP
Library.
When you set up your computer for the first time, you’ll install and charge the battery,
connect the AC adapter, turn on the computer, and run the Windows setup program.
Step 1: Install the battery
Do not mutilate or puncture batteries. Do not dispose of batteries in fire, or they
can burst or explode, releasing hazardous chemicals. Rechargeable batteries must
be recycled or disposed of properly.
Your computer is shipped with the battery installed. If the battery has been removed, you
should install it:
1. Turn the computer upside down.
2. Insert the connector end of the battery into the battery compartment and slide it in
until it latches.
20Corporate Evaluator’s Guide
Getting Started with Your HP Notebook
Setting Up Your Computer
To remove the battery
1. Before removing the battery, do one of the following:
• Shut down the computer or put it into Hibernate mode, or
• Plug in the AC adapter.
2.Slide the battery’s release latch, and then slide the battery out of its compartment.
Corporate Evaluator’s Guide21
Getting Started with Your HP Notebook
Setting Up Your Computer
Step 2: Connect AC power
CAUTION
Important
Use only the HP AC adapter included with your computer (or other approved
adapter that meets the power requirements of the computer).
If “75W” is printed below the AC adapter socket on the computer, do not use a 60watt, 3.16-amp adapter, such as HP F1454A or F1781A, and do not use DC adapter
accessories F1455A and F2297A.
Using the wrong AC adapter could damage the computer or adapter and may void
your warranty (see "Hewlett-Packard Limited Warranty Statement" on page 161).
• Plug the AC adapter into the computer and connect the power cord to the AC adapter,
then plug the power cord into a wall outlet. The computer’s battery then starts
charging.
When unplugging the AC adapter, unplug the power cord from the outlet first.
While the battery is charging, you can continue with step 3.
22Corporate Evaluator’s Guide
Getting Started with Your HP Notebook
Setting Up Your Computer
Step 3: Connect a phone line
If your computer does not include a built-in modem, you can skip this step. Also, if you
prefer, you can instead connect to a PC Card modem or an external modem.
1. Make sure the telephone line is an analog line, sometimes called a data line. (You
must not use a digital line.)
2. Connect the telephone cord into a telephone jack. If the plug on the phone cord
doesn’t fit the jack, you may need to use an adapter.
3. Plug the other end of the phone cord into the built-in modem.
For details about using the modem, see “Using the Modem” on page 60.
Corporate Evaluator’s Guide23
Getting Started with Your HP Notebook
Setting Up Your Computer
Step 4: Turn on the computer
• Press the power button above the left side of the keyboard. The computer then boots
up, and Windows starts automatically.
Hint
If your computer does not turn on when operating on battery power, the battery may be
out of power. Plug in the AC adapter and press the power button again. Leave the AC
adapter plugged in for at least an hour—or 2–3 hours to charge it fully.
Step 5: Set up Windows
Your notebook computer has Microsoft Windows preinstalled on its hard disk drive. The
first time you turn on your computer, the Windows Setup program runs automatically so
you can customize your setup.
1. Follow the Setup program’s instructions as they appear on the screen. If the program
prompts you to enter the Product ID code, you will find this code on the bottom of the
computer.
2. If your computer has a modem, check the modem’s country or region settings:
•Windows XP: click Start, Control Panel, Printers and Other Hardware, Phone and
Modem Options, and then click Edit on the Dialing Rules tab.
•Windows 2000: click Start, Settings, Control Panel, double-click Phone and
Modem Options, and then click Edit on the Dialing Rules tab.
24Corporate Evaluator’s Guide
Getting Started with Your HP Notebook
Setting Up Your Computer
Step 6: Register your notebook
Be sure to register your computer. Registering is free and fast, and ensures you will
receive quicker, more personalized support. The information you provide during
registration allows us to provide you with better products and services.
Registering your computer does the following:
• Records your ownership of the computer with Hewlett-Packard and provides access
to service, support, and information.
• Records your ownership of the Windows XP operating system with Microsoft. If you
have Windows 2000, please contact Microsoft separately to register the operating
system.
If you decide not to register during Windows setup, choose the option to print the
registration form, and then fax it to HP at the fax number on the form. Or you can register
by calling HP Customer Care—see “To contact HP for support or service”on page 156 to
find the phone number.
To connect to the Internet
If you are connected to a wired or wireless LAN with Internet access or your computer
has a modem (built-in, PC Card, or external), you can connect to the Internet. For details,
see “Using the Modem” on page 60, “Connecting to a LAN” on page 68, or “Making
Wireless Connections” on page 69.
What to do next
• If you’re not familiar with the version of Windows installed on your computer, click
Start, Tour Windows XP or Start, Help (Windows 2000), or check the Windows
manual to discover what’s new.
• See the online Reference Guide to learn more about using and maintaining your
computer—click Start, Help and Support, HP Library (Windows XP) or Start,
Programs, Hewlett-Packard, Notebook, HP Library (Windows 2000).
Corporate Evaluator’s Guide25
Basic Operation
Corporate Evaluator’s Guide27
Basic Operation
Operating Your Computer
Operating Your Computer
You can start and stop your computer using its power button. However, at certain times
you may want to use other methods to start or stop the computer—depending on power
considerations, types of active connections, and start-up time.
To turn the computer on and off
Power modeTo enter this mode
On mode
Power mode status light is on.
Standby mode
Saves significant power.
Turns off the display and other components.
Maintains current session in RAM.
Restarts quickly.
Restores network connections.
Power mode status light is blinking.
Hibernate mode
Saves maximum power.
Saves current session to disk, then shuts down.
Restores network connections.
Power mode status light is off.
Shut down (off)
Saves maximum power.
Turns off without saving current session.
At startup, resets everything, starts a new
session, and restores network connections.
Power mode status light is off.
To turn on: Press the power button to restart, or to resume your session from Standby or Hibernate mode.
You can also customize the way these power modes work. See “How the computer
manages power automatically” on page 52.
Press the power button.
Press the power button
–or–
click Start, Turn Off Computer, Stand By (Windows XP)
–or–
click Start, Shut Down, Standby (Windows 2000)
–or–
allow timeout.
Click Start, Turn Off Computer, Turn Off (Windows XP)
–or–
click Start, Shut Down, Shut down (Windows 2000)
–or–
press the power button for 4 seconds (only if the Start
menu procedure doesn’t work).
28Corporate Evaluator’s Guide
Basic Operation
Operating Your Computer
To reset the computer
Occasionally, you may find that Windows or the computer has stopped responding, and
will not let you turn the computer off. If this happens, try the following in the order listed.
• If possible, shut down Windows:
Windows XP: press CTRL+ALT+DEL, and then click Shut Down, Restart.
Windows 2000: press CTRL+ALT+DEL, click Shut Down, and press the power
button to restart.
–or, if this fails–
• Press the power button for 4 seconds until the display shuts down, and then press the
power button again to restart.
–or, if this fails–
• Insert the tip of a ballpoint pen into the reset button on the bottom of the computer,
and then press the power button to restart.
To reset the computer while it’s docked in a port replicator, you can press the reset button
on the left side of the port replicator.
Corporate Evaluator’s Guide29
Basic Operation
Operating Your Computer
To change the boot device
The computer normally boots from its internal hard disk. You can also boot the computer
from a floppy disk drive, a CD-ROM drive, or an internal network interface card.
1. Click Start, Turn Off Computer (or Shut Down), Restart.
2. When the HP logo appears, press ESC to display the Boot menu.
3. Use the arrow keys to select the boot device, and press ENTER.
If you want to boot from a specific device whenever it is present, change the boot order
using the BIOS Setup utility—see “To run the BIOS Setup utility” on page 147.
To use the touch pad
The touch pad includes an on-off button so you can turn off the touch pad to avoid
moving the pointer accidentally, such as by touching the pad while typing. The indicator
light turns off when you turn off the touch pad.
1. Click buttons. The click buttons work like the left and right buttons on a standard
mouse.
2. Touch pad (touch-sensitive pointing device).
30Corporate Evaluator’s Guide
Loading...
+ 160 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.