HP mp3300, mp3220 User Manual

mp3320 series

digital projector

user’s guide

Notice

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constitu ting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations shall not apply to consumer transactions in Australia and the United Kingdom and shall not affect the statutory rights of consumers.

The programs that control this product are copyrighted and all rights are reserved. Reproduction, adaptation, or translation of those programs without prior written permission of Hewlett-Packard Company is also prohibited.

Microsoft® and Windows® are US registered trademarks of Microsoft Corporation. Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.

Hewlett-Packard Company Display Technologies and Products 1000 NE Circle Blvd. Corvallis, OR 97330

First Edition (January 2006 )

Contents

1 Setting Up

What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Identifying Common Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Projector at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Projector buttons and lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Back panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting Up the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

To position the projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

To set up on a table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

To connect power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

To connect a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

To connect a handheld organizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

To connect video sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Turning On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

To turn the projector on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

To turn the projector off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Making Basic Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

To aim the projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

To adjust the focus and zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2 Giving Presentations

Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Showing Presentations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

To present from a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

To change the source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

To hide or show the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

User’s Guide 3

Contents

3 Adjusting the Projector

Adjusting the Picture and Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

To adjust a slanted picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

To adjust the image according to the type of picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To adjust other image settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To adjust the audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To adjust the projector setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using the On-Screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

To change settings using the on-screen menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Quick choice menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Select input menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Adjust picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Help menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4 Maintaining the Projector

Performing Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

To get the projector status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

To clean the projector lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

To replace the lamp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

To replace the battery in the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Upgrading the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

To update the firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5 Installing Permanently

Installing the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

To install on a table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

To install on the ceiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

To install for rear projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

To mount the projector on a tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

To lock the projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

4 User’s Guide

Contents

6 Fixing Problems

Troubleshooting Suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Start-up problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Picture problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Sound problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Interruption problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Remote control problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Testing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

To run the projector diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

7 Reference

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

LED safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Mercury safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Korea. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

International. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Index

User’s Guide 5

Contents

6 User’s Guide

Setting Up

The chapter explains how to install and set up the HP digital projector.

■ “What’s in the Box?” on page 8

■ “Identifying Common Features” on page 9

■ “Setting Up the Projector” on page 15

■ “Turning On and Off” on page 24

■ “Making Basic Adjustments” on page 26

User’s Guide 7

Setting Up

What’s in the Box?

Before setting up your projector, be sure your shipping box includes the following items. If the shipping box does not contain any of the following items, contact HP.

Identifying the contents of the box

Symbol Item Function

Projector Displays images.

Carrying case Carries and protects projector.

USB cable Connects to computer USB input.

Appearance of included remote may vary from remote shown. Functionality is the same.

8 User’s Guide

VGA cable Connects to computer video output.

Remote control Control projector.

Quick Setup Guide, warranty, support, and port activation documentation

Documentation CD Contains user's guide and other

Power cord Connects projector to power source.

Provide documentation to help get started and find support.

documentation.

Identifying Common Features

This section identifi es common features and functions of the projector .

■ “Projector at a glance” on page 10

■ “Projector buttons and lights” on page 11

■ “Back panel” on page 12

■ “Remote control” on page 13

■ “Accessories” on page 14

Setting Up

User’s Guide 9

Setting Up

Projector at a glance

Identifying the projector

Symbol Item Function

Power cord socket Connects power cord to projector.

Button panel Contains buttons and lights.

Zoom ring Enlarges picture size 100–120%.

10 User’s Guide

Focus ring Focuses at distances of 1.2 to 12 m

Height adjustment button Adjusts the height of the picture.

Receiver for remote control Receives signals from the remote control.

Lens cover Protects lens.

(4 to 40 ft).

Projector buttons and lights

Setting Up

auto

sync

Identifying buttons and lights on the projector

Symbol Item Function

Power button Turns the projector on or off.

back

5 6

User’s Guide 11

Enter button, back button, and directional arrows

Auto sync button Resynchronizes the projector to the input

Page-up and page-down buttons

Lamp-warning light Turns on when lamp fails.

Temperature-warning light Turns on when the internal temperature is

Video button Optimizes the picture for video input.

Graphics button Optimizes the picture for data input.

Source button Switches to the next input source.

Change projector settings using the on-screen menu.

signal. Scroll up and down through pages on a

connected computer.

too high.

Setting Up

Back panel

VGA

inin

Identifying the back panel

Symbol Item Function

Security slot Secures the projector using a cable lock.

Receiver for remote control Receives signals from the remote control.

5 6

12 User’s Guide

USB output Connects to computer to control the mouse.

Audio input Connects audio source.

Composite-video input (RCA) Connects video input from devices like VCRs.

S-video input Connects video input from devices like VCRs

and DVD players.

VGA input Connects video input from computers.

Remote control

Setting Up

✎

Before using the remot e control, remove the ba ttery prote ctor by pullin g the plastic tab until it comes out of the remote control.

6 5

2 1

8 9

Identifying the remote control buttons

Symbol Item Function

Enter button, back button, and directional arrows

Change projector settings using the on-screen menu.

User’s Guide 13

Page-up and page-down buttons

Source button Switches to the next input source.

Mouse pad Moves the mouse pointer on a connected

Left-click and right-click mouse buttons

Hide button Hides the display.

Power button Turns the projector on or off.

Auto sync button Resynchronizes the projector to the input

Picture mode button Adjusts the picture so it is optimized for

Scroll up and down through pages on a connected computer.

computer. Perform left-click and right-click mouse

functions for a connected computer.

signal.

either video input or data input.

Setting Up

Accessories

Get more from your presentations with HP projector accessories. You can purchase accessories at www.hp.com or through your projector dealer.

■ HP ceiling mount kit enables you to simply and discreetly install your projector

on the ceiling.

■ HP mobile screens with built-in handles are easy to carry and set up anywhere

you need them.

■ HP premium remote control allows you to control every aspect of your

presentation.

■ HP power cables allow you to connect in any region.

■ HP cables allow you to connect all audio-video equipment.

■ HP replacement lamp brings your projector up to factory-fresh brightness.

14 User’s Guide

Setting Up the Projector

This section describes how to set up, plan, and connect the projector.

■ “To position the projector” on page 16

■ “To set up on a table” on page 17

■ “To connect power” on page 18

■ “To connect a computer” on page 19

■ “To connect a handheld organizer” on page 20

■ “To connect video sources” on page 21

Setting Up

User’s Guide 15

Setting Up

To position the projector

The following tables show you where to position the projector in relation to the screen.

Identifying image size relative to distance from screen

Image size (diagonal) Image size (width) Distance (lens to screen)

30 in. 0.8 m 24 in. 0.6 m 48–58 in. 1.2–1.5 m 40 in. 1.0 m 32 in. 0.8 m 64–77 in. 1.6–2.0 m 60 in. 1.5 m 48 in. 1.2 m 96–115 in. 2.4–2.9 m

80 in. 2.0 m 64 in. 1.6 m 128–154 in. 3.3–3.9 m 100 in. 2.5 m 80 in. 2.0 m 160–192 in. 4.1–4.9 m 120 in. 3.0 m 96 in. 2.4 m 192–230 in. 4.9–5.9 m 150 in. 3.8 m 120 in. 3.0 m 240–288 in. 6.1–7.3 m 180 in. 4.6 m 144 in. 3.7 m 288–346 in. 7.3–8.8 m 200 in. 5.1 m 160 in. 4.1 m 320–384 in. 8.1–9.8 m 240 in. 6.1 m 192 in. 4.9 m 384–461 in. 9.8–11.7 m

270 in. 6.9 m 216 in. 5.5 m 432–480 in. 11.0–12.0 m

290 in. 7.4 m 232 in. 5.9 m 464–480 in. 11.8–12.0 m

16 User’s Guide

Setting Up

If you do not want to use the distance table, you can use the following equations to help determine where to install th e projecto r relative to the screen.

Calculating projection dimensions

distance from lens to screen = A × width of screen

minimum and maximum distance from screen = B

width of screen = 0.8 × diagonal of screen (for 4:3 screen)

projector lens below bottom of screen = C × width of screen (for 4:3 screen)

A = 2.0 to 2.4

B = 1.2 to 12 m (4 to 40 ft)

C = 0.11 to 0.42

To set up on a table

1. Place the projector on a stable platform located 1.2 to 12 m (4 to 40 ft) in front of the screen. Ideally, the platform s hould be lower than the bottom of the screen.

2. Connect one end of the powe r cord to the si de of the project or and the oth er end to an electrical outlet.

3. When you first turn on the projector, if the image is upside-down or backward, you should change a menu setting. Open the on-screen menu (see “To change settings using the on-screen menu” on page 37) and select Setup > Projector position. Then choose Front Table from the drop-down list—this is the default setting.

If you want to pe rmanently install the proj ector on the cei ling or behind the screen, see “Installing the Projector” on page 49.

User’s Guide 17

Setting Up

To connect power

■ Connect one end of the power cord to the side of the projector 1 and the other

end to an electrical outlet

18 User’s Guide

Setting Up

To connect a computer

1. Connect the VGA cable between the VGA port on the projector 1 and the VGA port on the computer

2. (Optional) To allow the remote control to function as the computer mouse, connect the USB cable between the USB port on the projector port on the computer

3. (Optional) To get audio, connect a mi ni-phone audio cable (not provided) between the audio port on the projector

3 and the USB

5 and the computer 6.

VGA in

User’s Guide 19

Setting Up

To connect a handheld organizer

1. Be sure the handheld organizer has a VGA-out port. If necessary, install a VGA-out accessory card into the organizer.

✎

Not all handhelds come with VGA-out ports. For example, the iPAQ Pocket PC requires a VGA-out PC Card with 15-pin connector.

2. Connect the VGA cable between the VGA port on the projector VGA-out PC Card

2 on the organizer.

VGA in

1 and the

20 User’s Guide

Setting Up

To connect video sources

If you have a SCART video device, you will need an adapter (available from HP) to connect the device to the projector.

S-video connection

Many DVD players and VCRs have S-video output.

1. Connect an S-video cable (not provided) between the S-video port on the projector

2. (Optional) To get audio, connect a mi ni-phone audio cable (not provided) between the audio port on the pr oj ector RCA audio connectors, use a mini-phone to RCA adapter or cable.

1 and the video device 2.

3 and the video device 4. I f t he vi deo devi ce has

User’s Guide 21

Setting Up

Composite video connection

Many VCRs and other video equipment have composite video output, a single RCA video output connector.

1. Connect a composite video cable (RCA connector) (not provided) between the composite video port on the projector device

1 and the RCA video port on the video

2. (Optional) To get audio, connect a mi ni-phone audio cable (not provided) between the audio port on the pr oj ector

3 and the video device 4. I f t he vi deo devi ce has

RCA audio connectors, use a mini-phone to RCA adapter or cable.

22 User’s Guide

Setting Up

Component video connection

Many DVD players and other video equipment have component-video output, three RCA connectors labeled "Y,Pb,Pr", "R,G,B", or similar.

1. Connect a VGA-to-co mponent v ideo cable ( available f rom HP) betwee n the VGA port on the projector video device

1 and the three RCA component-video connectors on the

2. (Optional) To get audio, connect a mi ni-phone audio cable (not provided) between the audio port on the pr oj ector

3 and the video device 4. I f t he vi deo devi ce has

RCA audio connectors, use a mini-phone to RCA adapter or cable.

VGA in

User’s Guide 23

Setting Up

Turning On and Off

This section provides instructions on turning the projector on and off.

■ “To turn the projector on” on page 24

■ “To turn the projector off” on page 25

To turn the projector on

1. Be sure the power cord is connected.

2. Open the lens cover

1 by rotating it.

3. Press the power button remote control.

2 on top of the pro jecto r, or press the power butt on on th e

4. Connect and power on t he sour ce , suc h as computer, handheld org ani zer, or DVD player. See “Setting Up the Projector” on page 15 for more information.

24 User’s Guide

Setting Up

To turn the projector off

1. Press the power button on the projector or remote control to turn off the projector. The power button bl ink s during the cool-down period, then the projector turns off.

2. You can disconnect video and audio equipment from the projector during the cool-down period, but not the power cord.

3. If you must unplug or remove the projector, wait until the power light stops blinking, then unplug the power cord.

CAUTION: Do not disconnect power until the projector has cooled down (the fan stops) and the power button stops blinking. Otherwise, you might shorten the life of the lamp.

If you try to turn on the projector again during the cool-down period, it does not turn on. Wait until the cool-down period ends and the power button stops blinking.

User’s Guide 25

Setting Up

Making Basic Adjustments

This section provides instructions on making basic adjustments to the projector.

■ “To aim the projector” on page 26

■ “To adjust the focus and zoom” on page 27

To aim the projector

■ To raise the projected picture on th e scr een, press the height adjustment button 1

and lift the front of the projector to the desired display angle button to lock the adjustment.

■ To lower the projected picture, press the height adjustment button while lowering

the front of the proje ctor. Release the button to lock the adjustment.

■ To store the projector, press the height adjustment button and lower the projector

fully, then release the button.

2. Release the

When you tilt the project or up or down, t he side s of the picture mig ht become slant ed. To adjust the picture so the sides ar e vertical, see “To adjust a slante d picture” on page 33.

If the picture is not l evel on the scr een, screw t he adjust able back foot in or out to level the projector.

26 User’s Guide

Setting Up

To adjust the focus and zoom

1. Rotate the focus ri ng un til the image becomes clear. The projector can be focused at distances of 1.2 to 12 m (4 to 40 ft).

2. Rotate the zoom ring to adjust the picture size from 100 to 120%.

If the picture does not fit the screen, you might have to move the projector closer to the screen.

User’s Guide 27

Setting Up

28 User’s Guide

The chapter explains how to give presentations with the projector.

■ “Using the Remote Control” on page 29

■ “Showing Presentations” on page 31

Using the Remote Control

6 5

Giving Presentations

2 1

■ To turn the projector on or off, press the power button 7.

■ To hide or unhide the projected picture, press the hide button 6.

■ To switch to the next connected input source, press the source button 3.

User’s Guide 29

8 9

Giving Presentations

■ To operate as a mouse on a computer, press the edge of the mouse pad 4 in the

direction you wan t the poi nter t o move, and p ress the left-cl ick button. This feature requires a USB connection between the projector and computer.

■ To control page-up and page-down on a computer, press the page-up and

5 or right-click 5

✎

page-down buttons projector and computer.

■ To optimize the picture for th e type of i nput s ignal , press the pictur e mode /

button. This changes between adjustments for video input and for data input.

■ To change projector settings using the on-screen menu, press enter and use the

navigation buttons to make the changes. See “Using the On-Screen Menu” on page 36 for more details.

■ To exit from any on-screen menu or adjustment, press the back button.

■ To adjust synchronization, press the auto sync button.

From with in a distance of 9 m (30 ft), aim the remote control at the screen or at the front or back of the projector.

2. This feature requires a USB connection between the

30 User’s Guide

Showing Presentations

This section describes several things you can do during presentations.

■ “To present from a computer” on page 31

■ “To change the source” on page 32

■ “To hide or show the display” on page 32

To present from a computer

1. Be sure the computer is connected to the projector. See “To connect a computer” on page 19 for more information.

2. Be sure the computer and the projector are on. See “To turn the projector on” on page 24 for more information .

Giving Presentations

✎

If the computer display is not projected on the screen, you might have to press a function key (such as Fn + F4 or Fn + F5) to turn on the computer’s video port. See the video port card shipped with the projector for more information.

3. If you want to adjust the projected image, see “Adjusting the Picture and Sound” on page 33.

4. You can use the remote control to enhance your presentation. For more information, see “Using the Remote Control” on page 29.

❏ To page through a presentation, press the page-up or page-dow n

buttons.

❏ To move the mouse pointer, press the edge of the mouse pad in the direction

you want the pointer to move.

For the mouse and pag e-up or page-down operations, aim the remo te co ntrol at the screen or at the front or back of the projector from within a distance of 9 m (30 ft).

These operations require a USB connection from the projector to the computer.

User’s Guide 31

Giving Presentations

To change the source

To change the source, either:

■ Press the source button on the projector or remote control.

■ Open the on-screen menu, go to Selec t input and sel ect the port t o whic h the in put

source is connected.

To hide or show the display

You can hide the display from your audience temporarily.

■ Press the hide button on the remote control. (If you press the hide button again

within 5 seconds, the display becomes completely blank, without the reminder how to show the display again.)

■ Open the on-screen menu and select Quick choice > Hide.

The screen remain s bl ank until you press the hide button again or a ny ot her button on the projector or remote control.

✎

If you are using Microsoft PowerPoint, you can also press the B key or the W key to hide the display. The screen remains blank until you press the B key or the W key again.

32 User’s Guide

This chapter describes how to make adjustments to the projector.

■ “Adjusting the Picture and Sound” on page 33

■ “Using the On-Screen Menu” on page 36

Adjusting the Picture and Sound

This section provides the following instructions on adjusting the picture and sound.

■ “To adjust a slanted picture” on page 33

■ “To adjust the image according to the type of picture” on page 34

■ “To adjust other image settings” on page 34

■ “To adjust the audio” on page 34

Adjusting the Projector

■ “To adjust the projector setup” on page 35

To adjust a slanted picture

If the picture has slanted sides on the screen, you can str ai ght en them. This is done by making the top or bottom shorter until the sides are straight.

1. Open the on-screen menu and select Quick choice > Keystone.

2. Adjust the keystone setting as needed using the m enu buttons on the projector or remote control:

❏ If the top of the picture is too wide or too narrow, press left or right

until the width is corrected.

❏ If one side of the picture is too tall or too short, move the projector until it is

straight in front of the screen, not off to one side.

3. Press the back button to save the settings.

User’s Guide 33

Adjusting the Projector

To adjust the image according to the type of picture

Use the picture mode buttons on the projector or the remote control to optimize the image.

■ T o opt imize the pic ture for da ta present ations, pr ess the grap hics button on the

projector. The graphics button turns on.

■ To optimize the picture for video images, press the video button on the

projector. The video button turns on.

■ To switch between these settings, press the picture mode / button on the

remote control.

To adjust other image settings

✎

The on-screen menu provides many settings that allow you to fine-tune the picture.

1. Open the on-screen menu and select Adjust picture.

2. Change the picture adjustments as needed. From the Adjust picture menu, you can change basic and advanced picture

options, such as brightness, contrast, aspect ratio, and keystone correction.

To get descriptions f or al l a vaila ble pi ctur e adj ustment s, se e “A djust pict ure menu” on page 40.

To exit from any on-screen menu or adjustment, press the back button.

To adjust the audio

1. Open the on-screen menu and select Quick choice.

2. Set the audio adjustments. From the Quick choice menu, you can adjust mute and volume.

34 User’s Guide

Adjusting the Projector

To adjust the projector setup

1. Open the on-screen menu and select Setup.

2. Set the setup adjustments as needed. From the Setup menu, you can select settings such as menu language, projector

position, and lamp saver mode.

To get descriptions for all available setup adjustments, see “Setup menu” on page 42.

User’s Guide 35

Adjusting the Projector

Using the On-Screen Menu

This section explains how to navigate the on-screen menu and provides function definitions. The tables in this section describe all the functions available in the on-screen menu for th e fir mware v ers ion a t pub licat ion. I f your firmwar e is a dif f erent version, some menus might differ from those shown.

■ “To change settings using the on-screen menu” on page 37

■ “Quick choice menu” on page 38

■ “Select input menu” on page 39

■ “Adjust picture m enu” on page 40

■ “Setup menu” on page 42

■ “Help menu” on page 42

✎

To exit from any on-screen menu or adjustment, press the back button.

36 User’s Guide

Adjusting the Projector

To change settings using the on-screen menu

You can change the on -screen men u settings wit h either t he butt ons on the pr ojector or on the remote control.

SCREENSHOT

auto

sync

back

✎

1. Press enter on the projector or the remote control to open the on-screen menu.

2. Press up or down to highlight the desired menu, and press right to select the highlighted menu.

3. Press up or down to highlight the desired parameter, and press enter to select the highlighted option.

4. Press left or right to select the desired se tting . For c erta in se tting s, you see a different display while making the change.

5. Press enter or other indicated button to return to the menu.

6. To go to a different menu, press left and select the menu.

7. To close the on-screen menu, press the back button.

If nothing occurs for a period of time, the on-screen menu closes. To change the amount of time until the on-screen menu closes, open the on-screen menu and select

Setup > Timeout for menu.

When you make certain a djustme nts, you may wan t to ch ange se veral relat ed set ting s. If a setting adjustment inc lud es a hin t for moving t o relat ed set ti ngs , you can pr ess up

or down to quickly move to another setting and adjust it.

User’s Guide 37

Adjusting the Projector

Quick choice menu

Quick choice

Keystone Corrects the slanted sides of an image.

Reset keystone Resets keystone correction to zero.

Next input Searches for the next available signal from an input

Picture mode Adjusts the color settings for the type of picture. You

Brightness Brightens or darkens the image.

Contrast Sets difference between light and dark areas.

source.

can optimize the picture for computer presentations or video output. The remote control and projector have buttons to change the picture mode.

Hide Removes all images from the screen.

Mute Stops audio output.

Volume Adjusts the volume.

38 User’s Guide

Adjusting the Projector

Select input menu

For a visual aid, see “Back panel” on page 12.

Select input

VGA Shows the input to the VGA port. This usually

connects to a computer, although it can also connect to a component-video device. This input is normally considered a graphics input.

Composite video Shows the input to the yellow composite port (the

input to the left of the S-video port on the back panel). The port usually connects to a TV or VCR. This input is normally considered a video input.

S-video Shows the input to the S-video port. This usually

connects to a video device, such as a VCR, camcorder, or DVD player. This connection is normally considered a video input.

Auto-scan sources Sets whether the projector automatically searches for

input signals and displays the next one found.

User’s Guide 39

Adjusting the Projector

Adjust picture menu

Adjust picture

Picture mode Adjusts the color settings for the type of picture. You

Adjust picture mode... Changes settings that define the current picture

White intensity Sets the brightness of white areas.

Picture enhancement Refines the color, lightness, and other characteristics

Color temperature Shifts colors toward red or blue.

Aspect ratio Selects the proportions of the image that is not

can optimize the picture for computer presentations or video output. The remote control and projector have buttons to change the picture mode.

mode.

of the picture.

automatically corrected by the projector.

• To automatically adapt to most inputs, select

Best Fit.

• To stretch the picture to cover the entire projection

area, select Fill.

• To show each picture dot as one projected dot,

select 1-to -1.

If the input source is a widescreen device, go to

Adjust picture > Shape settings > Widescreen input.

Reset this picture mode Resets the current picture mode to its default settings.

Color settings... Adjusts the picture and colors.

Brightness Brightens or darkens the image.

Contrast Sets the difference between light and dark areas.

Sharpness Sharpens or softens the image.

Color saturation Adjusts the intensity of colors.

40 User’s Guide

Adjust picture (continued)

Tint Shifts colors toward red or green.

Red Adjusts the amount of red in the picture.

Green Adjusts the amount of green in the picture.

Blue Adjusts the amount of blue in the picture.

Color space For certain component inputs, selects the type of

signal encoding used by the input source. You can override the selection made by the projector.

Reset color settings Resets these color settings to their default settings.

Shape settings... Adjusts the shape of the picture.

Keystone Corrects the slanted sides of an image.

Adjusting the Projector

Reset keystone Resets keystone correction to zero.

Widescreen input Sets whether a widescreen (16:9) input device is in

use.

VGA settings... Adjusts settings for the VGA input port.

Auto-sync Resynchronizes the projector to the input signal from

a computer. This can compensate for any change in the signal.

Frequency Adjusts the timing of the projector relative to a

computer graphics card.

Tracking Synchronizes the projector to a computer graphics

card.

Vertical offset Shifts the image up or down within the projection

area.

Horizontal offset Shifts the image left or right within the projection

area.

Reset video settings Resets all video settings to default settings.

User’s Guide 41

Adjusting the Projector

Setup menu

Setup

Language... Selects the language for the menus.

Lamp saver Sets a lower power level for the lamp.

Projector position Adjusts the image to match the orientation of the

Timeout for menu Sets how many seconds the on-screen menu waits for

Auto-scan sources Sets whether the projector automatically searches for

Reset lamp hours For a new lamp, resets hours of use.

projector: upright or upside-down, in front of or behind the screen. Inverts or reverses the image accordingly.

input before it closes.

input signals and displays the next one found.

Reset all settings Resets all menu settings to default settings.

Help menu

Help

Displays information and status for the projector.

Diagnostics... Show tests for checking the operation of the projector

and the remote control.

42 User’s Guide

Maintaining the Projector

This chapter explains how to maintain the projector.

■ “Performing Routine Maintenance” on page 43

■ “Upgrading the Projector” on page 47

Performing Routine Maintenance

This section provides instructions on performing routing maintenance.

■ “To get the projector status” on page 43

■ “To clean the projector lens” on page 44

■ “To replace the lamp module” on page 44

■ “To replace the battery in the remote control” on page 46

To get the projector status

■ Open the on-screen menu and select Help. This screen shows information and

status for the projector.

User’s Guide 43

Maintaining the Projector

To clean the projector lens

■ To minimize the risk of damaging or scratching the lens surface, blow dust

particles off the lens with clean, dry, deionized air.

If this method does not work, use the following method:

■ Wipe the lens in a single direction with a clean, dry cloth. Do not wipe back and

forth across the lens. If the cloth is dirt y or sm ears the l ens, wash th e clot h. If t he cl oth is stil l d irty after

washing it or the fabric is damaged, replace it.

CAUTION: Cleaning requires special consideration:

■ Do not spray any type of fluid or cleaner directly on the lens surface. Cleaners might damage the lens.

■ Do not use fabric softener when washing a cleaning cloth or softener sheets when drying the cloth. Chemicals on the cloth might damage the surface of the lens.

■ Do not store a cleaning cloth in contact with the lens for a long time because doing so contaminates the lens with dye from the cloth. The cloth can be contaminated if left in the open air.

To replace the lamp module

WARNING: Replacing the lamp module requires special consideration:

44 User’s Guide

■ To reduce the risk of injury, be careful when removing the lamp module as broken glass might be present in the unlikely event the lamp is broken. If the lamp is broken, contact HP about repairs that might be required.

■ The lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred. Disposal of this lamp might be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (http://www.eiae.org).

■ Because the lamp assembly operates at a very high temperature, wait 30 minutes before removing the lamp module.

Maintaining the Projector

1. Turn off the projector and allow it to cool for 30 minutes.

2. On the bottom of the projector, loosen the two screws on the lamp cover and remove the cover.

3. Loosen the two screws on the lamp module and pull out the module.

4. Insert the lamp module and tighten the two screws.

5. Install the cover and tighten the two screws.

6. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp agai n.

7. Open the on-screen menu and select Setup > Reset lamp hours.

User’s Guide 45

Maintaining the Projector

To replace the battery in the remote control

1. Pull out the battery holder.

2. Insert the new battery in the holder.

3. Push the holder into the remote control.

When discarding old batteries, contact your local waste-disposal provider regarding local rest rictions on the disposal or recyc ling of batteries.

46 User’s Guide

Upgrading the Projector

To update the firmware

HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help. Also, additional language support is available by firmware download. Check for different versions at http://www.hp.com/support.

USB method

1. On a computer with a USB port, go to the HP projector upgrade website (see introduction for this section) and download the latest fi le intended for a USB upgrade.

2. Connect the USB cable between the USB port on the projector and the USB port on the computer.

3. On the computer, run the file you downloaded b y doub le- cl ic ki ng the file. Follow the on-screen instructions.

Maintaining the Projector

User’s Guide 47

Maintaining the Projector

48 User’s Guide

This chapter explains how to permanently install the digital projector.

Installing the Projector

This section provides instructions on how to permanently install the projector.

■ “To install on a table” on page 49

■ “To install on the ceiling” on page 50

■ “To install for rear projection” on page 52

■ “To mount the projector on a tripod” on page 53

■ “To lock the projector” on page 53

Installing Permanently

To install on a table

This installation is covered in detail in Chapter 1. See “Setting Up the Projector” on page 15 for more information .

User’s Guide 49

Installing Permanently

To install on the ceiling

To install the projector on a ceiling, you will need a ceiling mount (available from HP).

WARNING: To minimize the risk of injury from improperly installed equipment, it

is recommended that a professional installer performs the ceiling installation.

✎

The actual projector and mounting plate differ from those shown below, but the steps are the same.

1. Attach the mounting plate to the bottom of the projector. The pointed part of the hole in th e bracket faces the back of the projector. See the instructions that came with the ceiling mount.

2. Attach the ceiling-mount bracket to the ceiling, and firmly secure with three or four screws capable of holding 9 kg (20 lb). The ceiling-mount bracket must be located 1.2 to 12 m (4 to 40 ft) in front of the screen. See the table in “Setting Up the Projector” on page 15.

50 User’s Guide

Installing Permanently

3. With the projector lens aiming away from the screen, insert the mounting plate onto the bracket so the tabs engage, then pivot the projector so it aims forward. Tighten the rear thumbscrew fully, then tighten the two other thumbscrews.

4. Adjust the on-screen menu to match your settings. Open the on-screen menu and select Setup > Projector position. Then select Front Ceiling from the drop-down list.

User’s Guide 51

Installing Permanently

If you do not use an HP c eili ng mount, moun t the p rojec tor ac cordi ng to th e foll owing dimensions:

■ X = 82 mm (3.23 in.)

■ Y = 55 mm (2.17 in.)

■ Z = 110 mm (4.33 in.)

■ Thread size = M3

To install for rear projection

1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection.

See “To set up on a table” on pa ge 17 or “T o i nstall on the ceiling” on page 50 for more instructions.

2. Open the on-screen menu and select Setup > Projector position. Then select Rear Table or Rear Ceiling from the drop-down list.

52 User’s Guide

Installing Permanently

To mount the projector on a tripod

The projector includes standard tripod mount on the bottom of the projector. This allows the projector to be mounted on tripods readily available at camera and other electronic stores.

CAUTION:

■ The tripod should be capable of supporting a weight of at least 5 lb. Refer to the owner’s manual that came with your tripod for more information.

■ Do not overtighten the tripod mount screw. Doing so could strip the screw and cause the projector to fall off the tripod.

To lock the projector

The projector includes a built-in slot to secure the projector with a cable and a lock (such as the Kensington MicroSaver lock system, available at many computer stores).

1. Wr ap the c able aro und a secu re object , such as a ta ble leg. Loop the ca ble to c reate a slip knot around the stationary object, and be sure it cannot slip off.

2. Insert the lock

1 into the hole and twis t the key 2.

User’s Guide 53

Installing Permanently

54 User’s Guide

This chapter describes potential problems and offers suggestions to help correct them.

■ “Troubleshooting Suggestions” on page 55

■ “Testing the Projector” on page 63

Troubleshooting Suggestions

To use this section, f ind t he proble m stat ement that is cl osest to your pr oblem, then try each bulleted item one at a time until your problem is fixed. If the suggestions do not solve your problem, contact HP. See the Support Guide included with the projector.

■ “Start-up problems” on page 56

■ “Picture problems” on page 57

Fixing Problems

■ “Sound problems” on page 61

■ “Interruption problems” on page 61

■ “Remote control problems” on page 62

User’s Guide 55

Fixing Problems

Start-up problems

If no lights or sounds turn on:

If nothing is projected but the projector seems to start up:

❏ Be sure that the power cable is securely connected to the

projector and the other end is plugged into an outlet with power.

❏ Press the power button again.

❏ Be sure the lens cover is open. ❏ If the lamp indicator is on or blinking, unplug the projector after

it cools down. Remove and reins tall the lamp modul e. If this does not fix the problem, install a new lamp.

❏ If the temp erature ind icator is on or blinking, turn off the

projector and allow it to cool before restarti ng it. If the warning light turns on or blinks again, contact HP for assistance.

If the projector makes a “ticking” sound, if the projector lamp does not turn on, and if the lamp indicator is on or blinking:

❏ The projector lamp is too hot to light. Turn off the projector and

wait for it to cool before turning it o n again.

❏ If the lamp indicator is on or blinking, unplug the projector after

it cools down. Remove and reins tall the lamp modul e. If this does not fix the problem, install a new lamp.

❏ The projector lamp has reached the end of its life. Replace the

lamp.

56 User’s Guide

Picture problems

If the image is not displayed on the screen, but the HP startup screen is displayed:

❏ Press the source button on the projector or remote control. ❏ Turn off or disable the notebook or desktop computer screen

saver function.

❏ For a computer connection, ensure your notebook computer’s

external video port is turned on. See the video port card shipped with the projector. On some notebooks , for example, press the Fn + F4 function keys to turn on the external video port.

❏ Verify that the right input source is connected. Open the

on-screen menu and g o to Select i nput. Then set the correct input port where the equipment is connected.

❏ Verify that auto search is enabled. Open the on-screen menu and

go to Select input > Auto-scan sources.

Fixing Problems

If the wrong input source is displayed:

❏ Press the source button on the projector or the remote control to

select another active input source.

❏ Verify that the right input source is connected. Open the

on-screen menu and g o to Select i nput. Then set the correct input source.

❏ Verify that the projector is enabled for auto-searching. O pen the

on-screen menu and go to Select input > Auto-scan sources.

❏ If the input source might turn of f and on, open the on-s cr een

menu and go to Select input. Set Auto-scan sour c es to Off and select the correct input source.

User’s Guide 57

Fixing Problems

If the image is out of focus:

If an upside-down or reversed image is displayed:

❏ Be sure the lens cover is open. ❏ While displaying the on-screen menu, adjust the focus ring. (The

image size should not change; if it does, you are adjusting the zoom not the focus.)

❏ Ensure the projection screen is 1.2 to 12 m (4 to 40 ft) from the

projector.

❏ For a computer connection, set the display resolution on the

computer to 1024 x 768 pixels. If the computer has multiple monitors, adjust the resolution of the monitor assigne d to the projector.

❏ Check the projection lens to see if it needs cleaning.

❏ The projector ha s been set t o the wrong pos ition set ting. Open t he

on-screen menu, select Setup > Projector position, and select the correct setting.

If the image is too small or too large:

❏ Adjust the zoom ring on top of the projector. ❏ Be sure the projector is 1.2 to 12 m (4 to 40 ft) from the

projection screen.

❏ Open the on-screen menu and select Adjust picture > Adjust

picture mode > Aspect ratio. Try the different settings.

❏ For a wide-screen picture, open the on-screen menu and select

Adjust picture > Shape settings and try setting Widescreen input to Yes.

If the image has slanted sides:

❏ As much as possible, repositi on the projec tor so that it is centered

on the screen and below the bottom or above the top of the screen.

❏ Open the on-screen menu and select Quick choice > Keystone.

Adjust the setting as needed.

58 User’s Guide

If a scrolling or cut-off image is displayed:

❏ Press the auto sync button on the projector or remote control. ❏ For a computer connection, turn everything off, then power on

the projector first and power on the notebook or desktop computer second.

❏ For a computer connection, if the above steps do not correct the

display image, adjust the resolution of the notebook or desktop computer to 1024 x 768 pixels. If the computer has multiple monitors, adjust the resolution of the monitor assigne d to the projector.

If the image is flicke ring or unstable:

❏ Press the auto sync button on the projector panel or remote

control.

❏ For a computer connection, set the display resolution to

1024 x 768 pixels. If the computer has multiple monitors, adjust the resolution of the monitor assigned to the projector.

Fixing Problems

❏ For a computer connection, open the on-screen menu, select

Adjust picture > VGA settings and adjust the Frequency or Tracking.

If the imag e is stretched :

❏ Open the on-screen menu and select Adjust picture > Adjust

picture mode > Aspect ratio. Try the different settings.

❏ Open the on-screen menu and select Adjust picture > Shape

settings. Try changing the Widescreen input setting .

If the image disappears from the computer screen:

❏ For a notebook computer, you might be able to turn on both the

external VGA port and the built-in screen. See the computer manual or the projector’s video port guide.

If text or lines from a computer display seem rough or uneven:

❏ Check the f ocus adjustment. ❏ Open the on-screen menu and select Quick choice > Reset

keystone.

User’s Guide 59

Fixing Problems

If the projected colors seem slightly wrong:

If the projected colors seem completely wrong:

❏ If the video button on the projector is not lit, try pressing the

video button on the projector or the picture mode button on the remote control.

❏ Open the on-screen menu and select Adjust picture > Color

settings. Adjust the color settings as needed.

❏ Open the on-screen menu and select Adjust picture > Color

Settings > Color space. Ch ange the selection.

❏ Open the on-screen menu and select Help > Diagnostics.

Run color tests.

❏ Be sure the pins on the cable connectors are not bent or broken. ❏ Open the on-screen menu and select Adjust picture > Color

settings > Color space. Change the selection.

❏ Open the on-screen menu and select Help > Diagnostics.

Run color tests.

❏ Reset the picture settings to the factory-default settings. See the

following problem.

If the picture settings are completely wrong and you cannot fix them:

❏ Reset the projection settings to the factory-default settings. To do

this, open the on-screen menu and select Setup > Reset all settings, or hold down the down + up + right buttons

on the projector for 5 seconds.

If the projector stops responding to all controls:

❏ If possible, turn off the projector , th en unplug the power cord and

wait at least 15 seconds before reconnecting power.

60 User’s Guide

Sound problems

If no sound is coming out of the projector:

❏ Be sure you have an audio cable securely connected betw een the

projector and the input device.

❏ Be sure that the mute an d vo lume se tting s are corre ct on the i nput

device, such as a computer, DVD player, or camcorder.

❏ Open the on-screen menu and select Quick choice. Check the

following settings:

◆ Mute is turned off.

◆ Volume is correct.

Interruption problems

If the lamp indicator or temperature indicator turns on or blinks:

Fixing Problems

❏ If the lamp indicator blinks, the lamp is not able to light. Wait for

the projector to cool, then try starting it a gain.

❏ If the lamp indicator is on or blinking, unplug the projector after

it cools down. Remove and reins tall the lamp modul e. If this does not fix the problem, install a new lamp.

❏ If the temperature indica tor turns on or bl inks, the proj ector is too

hot. See the following problem.

If the projector suddenly shuts down and the temperature light turns on:

❏ If the temperature light is blinking, the fan is not working. Allow

the projector to cool for several minutes.

❏ If the temperature light is steady, the projector has overheated.

Allow it to cool for several minutes.

❏ If airflow is obstructed, remove the obstruction. ❏ If possible, remove any sources of excess heat in the room. ❏ If the condition occurs after restarting the projector, contact HP

to have the projector serviced or repaired.

User’s Guide 61

Fixing Problems

If the lamp shuts off d uring a presen tation:

If the lamp burns out or makes a popping sound:

Remote control problems

If the remote control does not operate:

❏ A minor power surge might cause the lamp to shut off. Wait a

few minutes, then power on the projector.

❏ If the lamp indicator is on or blinking, unplug the projector after

it cools down. Remove and reins tall the lamp modul e. If this does not fix the problem, install a new lamp.

❏ If the lamp burns out and makes a popping sound, the projector

will not turn back on until the lamp module has been replaced.

❏ If the lamp breaks, contact HP about repairs that might be

required.

❏ Be sure nothing is blocking the remote control receiver on the

front or back of the projector. Move to within 9 m (30 ft) of the projector.

❏ Open the on-screen menu and select Help > Diagnostics.

Run remote control test.

❏ Replace the battery in the remote control.

If only the mouse and page-up and page-down buttons do not work:

❏ Be sure you have a USB connection between the projector and

the computer.

❏ Open the on-screen menu and select Help > Diagnostics.

Run remote control test and USB test.

62 User’s Guide

Testing the Projector

The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control.

To run the projector diagnostics

1. Open the on-screen menu and select Help > Diagnostics.

2. Select a test to perform.

Fixing Problems

User’s Guide 63

Fixing Problems

64 User’s Guide

This chapter lists the specifications, safety information, and regulatory information for the projector.

■ “Specifications” on page 65

■ “Safety Information” on page 70

■ “Regulatory Information” on page 72

Specifications

Because HP continual ly improves its products, t he following s pecificat ions are subj ect to change. For the latest specifications, visit the HP website at http:// www.hp.com.

Identifying the projector specifications

Reference

Size 251 mm × 210 mm × 69 mm

(9.9 in. × 8.3 in. × 2.7 in.)

Weight 1.8 kg (3.9 lb)

Resolution XGA

Technology DLP

Video connectors VGA input, S-video input, composite-video input (RCA)

Optional cable for component-video input

Audio connectors Mini-phone stereo audio input

Video compatibility NTSC M (3.58 MHz), 4.43 MHz; PAL B, D, G, H, I, M, N;

SECAM B, D, G, K, K1, L; HDTV 480i/p, 575i/p, 720p, 1080i

IR receivers On front and back of projector

User’s Guide 65

Reference

Identifying the projector specifications

(continued)

Lens 2.0 to 2.4 throw ratio (distance/width)

Optical zoom 1:1.2

Keystone Manual correction: up to +25° to –30° vertical

Audio Monaural speaker, 1-W peak output

Lamp 200-W P-VIP lamp, 1.0-mm arc

2000 hours (half life) Lamp-saver mode reduces lamp power to 160 W, extends

lamp life Replacement lamp: L2152A

Light engine 0.7-in. 12° DDR DMD

XGA

Color system Two preset color modes are available:

Graphics Video

Remote control USB mouse

Mounting options Ceiling and tabletop, front and rear projection

Security Kensington lock compatible

Power 100 to 240 V at 50 to 60 Hz

66 User’s Guide

Reference

Identifying the projector specifications

Noise level 38±2 dBA

Environment Operating:

Temperature: 10 to 35°C (50 to 95°F) Humidity: 80% RH max, non-condensing Altitude: up to 3,000 m (10,000 ft), up to 25°C (77°F)

Storage:

Temperature: –20 to 55°C (–4 to 131°F) Humidity: 80% RH max, non-condensing Altitude: up to 12,000 m (40,000 ft)

(continued)

User’s Guide 67

Reference

Analog Video Mode Compatibility

Compatibility Resolution V-Sync (Hz) H-Sync (kHz)

VGA 640 x 350 70 31.5

640 x 350 85 37.9

640 x 400 85 37.9

640 x 480 60 31.5

640 x 480 72 37.9

640 x 480 75 37.5

640 x 480 85 43.3

720 x 400 70 31.5

720 x 400 85 37.9

SVGA 800 x 600 56 35.2

800 x 600 60 37.9

800 x 600 72 48.1

800 x 600 75 46.9

800 x 600 85 53.7

XGA 1024 x 768 60 48.4

1024 x 768 70 56.5

1024 x 768 75 60.0

1024 x 768 85 68.7

SXGA 1280 x 1024 60 63.98

1280 x 1024 75 79.98

SXGA+ 1400 x 1050 60 65.22

1400 x 1050 60 63.98

MAC LC 13 640 x 480 66.66 34.98

68 User’s Guide

Reference

Analog Video Mode Compatibility

(continued)

Compatibility Resolution V-Sync (Hz) H-Sync (kHz)

MAC II 13 640 x 480 66.68 35

MAC 16 832 x 624 74.55 49.725

MAC 19 1024 x 768 75 60.24

MAC 1152 x 870 75.06 68.68

MAC G4 640 x 480 60 31.35

MAC G4 640 x 480 120 68.03

MAC G4 1024 x 768 120 97.09

i Mac DV 640 x 480 117 60

i Mac DV 800 x 600 95 60

i Mac DV 1024 x 768 75 60

i Mac DV 1152 x 870 75 68.49

i Mac DV 1280 x 960 75 75

i Mac DV 1280 x 1024 75 90.9

User’s Guide 69

Reference

Safety Information

Safety precautions

WARNING: Observe the following precautions to reduce the risk of injury.

To prevent eye injury, do not look directly into the lens when the lamp is on.

■

■ T o prevent electrical shoc k, do not expose the proj ector to rain or moisture. Do not

open the projector except as instructed by the manual.

■ T o re duce the ris k of fire or ele ctrical shoc k, do not allow sma ll metall ic objects to

get inside the projector. Carry the projector only in its protective case, and do not store paper clips or other small objects inside the case.

■ Allow the projector to cool before removing any cover and touching internal

components, as instructed by the manual.

■ Keep paper and other combustible material away from the projector lens to

prevent the possibility of fire.

■ Use only an approved pow er cord rated f or the voltage and current marked on the

product label. Do not overload any outlet or extension cord.

70 User’s Guide

Reference

LED safety

The infrared ports located on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended:

■ If the unit requires service, contact an authorized HP service center.

■ Do not attempt to make any adjustment to the unit.

■ Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is

invisible light and cannot be seen.

■ Do not attempt to view the infrared LED beam with any type of optical device.

Mercury safety

WARNING: This digital projector lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred, discard any nearby food and drink, and thoroughly clean the table surface around the projector. Wash your hands after cleaning the area or handling a broken lamp. Disposal of this lamp may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org). You can find safety information about the lamp at www.hp.com/hpinfo/globalcitizenship/environment/productdata.

User’s Guide 71

Reference

Regulatory Information

This section presents information that shows how your digital projector complies with regulations in certain regions. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions.

U.S.A.

This digital p rojector has bee n tested and found to comply with th e limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonabl e pr otection against harmful interfe ren ce in a residential installati on.

This digital projector generates, uses, and can radiate radio frequency energy. If not installed and u sed in accordance with the instructions, it can cause harmful interference to radio communic ations. How ever, there is no guarantee that interference will not occur in a particular installation. If this digital projector does cause harmful interference to radio or television reception (which can be determined by unplugging the unit), try the following:

■ Reorienting or relocating the receiving antenna.

■ Relocating the digital projector with respect to the rec eiver.

■ Connecting the digital projector’s power cord to another power outlet.

Connections to peripheral devices

To maintain compliance with FCC Rules and Regulations, use properly shielded cables with this device.

For more informati on, cons ult y our de aler, an experienced radi o/te levis ion techn ician , or, prepared by the Federal Communications Commission, How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. At the first printing of this manual, the telephone number was 202-512-1800.

Canada

This Class B digital apparatus complies with Canadian ICES-003.

72 User’s Guide

Japan

Korea

Reference

User’s Guide 73

Reference

International

For regulatory identification purposes, your product is assigned a regulatory model number. The regulatory model number for your product is listed in the declaration of conformity. This regulatory numbe r i s different from the marketing name and product number.

DECLARATION OF CONFORMITY

According to ISO/IEC G uide 22 and EN 45014

Manufacturer's Name: Hewlett Packard Company Manufacturer's Address: Display Technologies & Products

1000 NE Circle Blvd. Corvallis, OR 97330-423 9

Declares, that the product(s):

Product Name: Digital Projector Model Number(s): mp3320, m p3322 series Regulatory Model: CRVSB-04VU Conforms to the following product specifications: Safety: IEC 60950-1:2001/ EN 60950-1:2001 +A11:2004

IEC 60825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 LED GB4943-1995

EMC: AS/N ZS CISPR22: 2002

EN55022: 1998+ A1: 2000+ A2: 2003 Class B EN55024: 1998+ A1: 2001+ A2: 2003 EN61000-3-2: 2000 EN61000-3-3: 1995+ A1: 2001 FCC - 47 CFR Part 15, subpart B, Class B ANSI C63.4 – 2003 ICES – 003: 2004 GB9254 – 1998, GB17625.1 - 2003

Supplementary information:

The product herewith complies with the requirements of following Directives and carries the CE marking accordingly:

-Low Voltage D irective: 73/23/EEC

-EMC Directive: 89/336/EEC [1] The product was tested i n a ty pic a l configuration with Hewl ett Packard Personal Computer peripherals. This device complies with Pa rt 15 of the FCC Rules. Operation is subject to the follow i ng two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that ma y cause undesired operation. Corvallis, Oregon, Dec ember 7, 2005

European Contact for re gul a tory topics only: Hewlett Pac ka rd G m bH , H Q-TRE, Herrenberger Straße 140, 710 34 Boeblingen, Germany. (FAX:+49-7031-143143). USA Contact: Hewlett P ac ka rd Co., Corporate Product Re gul at ions Manager, 3000 Hanover Street, Palo Alto, CA

94304. Phone: (650) 857-1501.

74 User’s Guide

Steve Brown, General Ma na ger

Reference

User’s Guide 75

Reference

76 User’s Guide

Index

accessories

listing adjust pi cture aiming the projector

raising and lowering analog video mode

compatibility audio

adjusting

back panel

identifying buttons

projector

remote control

ceiling installation

setting up component video connection

connecting video source composite video connection

connecting video source configuration

using on-screen menu connecting input sources

component video connection

composite video connection

computer with VGA port

handheld organizer

23 22

with S-video

contents

in the box

dimensions

of screen and room

distance

setting up in relatio n to image

firmware

updating

focus

adjusting range of

graphics mode

see picture mode

handheld organizer

connecting

hide button

using

image

adjusting

input/output connectors

see back panel

installation

User’s Guide Index 75

Index

see ceiling insta llation

see rear projection installation

see table installation

Kensington lock 53 keystone correction

adjusting

lamp module

replacing lamp saver mode language

changing LED safety

precautions lens

care

cleaning lights

identifying location

see ceiling insta llation

see rear projection installation

see table installation

lock

maintenance

routine maintenance menu

see on-screen menu

on-screen menu

about menu definitions

adjust picture menu definitions

quick choice menu definitions

select input menu definitions

setup menu definitions

36, 37

using

optimizing image

picture

adjusting

picture mode

changing definition

power

turning off turning on

presentations

changing source from a computer

projector

adjusting identifying parts maintaining setting up troubleshooting upgrading

34 30, 34

rear panel

see back panel

rear projection installation

setting up

remote control

battery replacement identifying using

reset

resetting

projection settings projector

safety inform ation

LED

Index 76 User’s Guide

Index

precautions 70 SCART device security

locking setup

adjusting

HP mp3300, mp3220 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual