
HP LaserJet M1120 MFP Series – Copy
Copy using the flatbed scanner
How do I? Steps to perform
1 Lift the flatbed scanner cover.
One-touch copy
2 Place the original document face-down on the flatbed
scanner with the upper-left corner of the document at
the corner indicated by the icon on the scanner.
3 Gently close the lid.
4 Press Start Copy on the product control panel to start
copying.
OK
HP LaserJet M1120 MFP
X
5 Repeat the process for each copy
1
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com

HP LaserJet M1120 MFP Series – Copy
How do I? Steps to perform
1 On the product control panel, press # of Copies.
Multiple copies
NOTE: The change in the setting remains active for about
2 minutes after the copy job has been completed. During
this time, Custom settings appears on the product
control-panel display.
2 Use the arrow buttons to set the number of copies
(between 1 and 99) that you want to make for your
current job.
3 Press Start Copy to begin copying your job.
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
X
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
2
www.hp.com
OK
HP LaserJet M1120 MFP
X

HP LaserJet M1120 MFP Series – Copy
Copy on both sides (Duplex)
How do I? Steps to perform
1 Load the first page of the document to be copied face-
Copy a two-sided original to a one-sided
document
3 Flip the page on the scanner to the second side, and
down onto the flatbed scanner, and then close the
scanner lid.
2 Press Start Copy.
then close the scanner lid.
OK
HP LaserJet M1120 MFP
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
4 Press Start Copy.
5 Repeat steps 1 through 4 for each page until all of the
original document pages have been copied.
1
www.hp.com
OK
HP LaserJet M1120 MFP
X

HP LaserJet M1120 MFP Series – Copy
How do I? Steps to perform
1 Load the first page of the document to be copied face-
Copying a two-sided original to a two-sided
document
3 Flip the page on the scanner to the second side, and
down onto the flatbed scanner, and then close the
scanner lid.
2 Press Start Copy.
then close the scanner lid.
OK
HP LaserJet M1120 MFP
X
4 Remove the copied page from the output bin and
place it face down into the priority input tray with the
top edge feeding into the device first.
5 Press Start Copy.
6 Remove the copied page from the output bin, and then
set it aside for manual collating.
7 Repeat steps 1 through 6, following the original
document page order, until all pages of the original are
copied.
2
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com
OK
HP LaserJet M1120 MFP
X

HP LaserJet M1120 MFP Series – Copy
Copy on special paper, labels, or transparencies
How do I? Steps to perform
Copy on special paper, labels, or
1 Lift the flatbed scanner cover.
transparencies
2 Place the original document face-down on the flatbed
scanner with the upper-left corner of the document at
the corner indicated by the icon on the scanner.
Change the default media-size setting 5 On the product control panel, press Setup.
6 Use the arrow buttons to select System setup, and
3 Gently close the lid
4 Load the media. Make sure that the top of the media is
forward and the side to be printed on is facing up.
then press OK.
OK
HP LaserJet M1120 MFP
OK
X
System setup
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
HP LaserJet M1120 MFP
1
www.hp.com

HP LaserJet M1120 MFP Series – Copy
How do I? Steps to perform
7 Use the arrow buttons to select Paper setup, and
Copy on special paper, labels, or
transparencies (continued)
8 Use the arrow buttons to select Def. paper size, and
then press OK.
then press OK.
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
X
Paper setup
Def.paper size
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
9 Use the arrow buttons to select a media size, and then
press OK.
10 Press OK to save the selection
2
www.hp.com
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
X
X

HP LaserJet M1120 MFP Series – Copy
How do I? Steps to perform
Copy on special paper, labels, or
transparencies (continued)
Change the default media-type setting
1 On the product control panel, press Setup.
2 Use the arrow buttons to select System setup, and
then press OK.
3 Use the arrow buttons to select Paper setup, and
then press OK.
4 Use the arrow buttons to select Def. paper type, and
then press OK.
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
OK
X
System setup
X
Paper setup
X
Def. paper type
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
HP LaserJet M1120 MFP
3
www.hp.com

HP LaserJet M1120 MFP Series – Copy
How do I? Steps to perform
5 Use the arrow buttons to select a media size, and then
Copy on special paper, labels, or
transparencies (continued)
press OK.
OK
HP LaserJet M1120 MFP
X
6 Press OK to save the selection.
OK
HP LaserJet M1120 MFP
X
7 Press Start Copy on the product control panel to start
copying.
X
OK
HP LaserJet M1120 MFP
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
4
www.hp.com

HP LaserJet M1120 MFP Series – Copy
Copy on pre-printed letterhead or forms
How do I? Steps to perform
1 Lift the flatbed scanner cover.
Copy on pre-printed letterhead or forms
2 Place the original document face-down on the flatbed
scanner with the upper-left corner of the document at
the corner indicated by the icon on the scanner.
3 Gently close the lid
4 Load the media. Make sure that the top of the media is
forward and the side to be printed on is facing up.
5 On the product control panel, press Setup.
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
6 Use the arrow buttons to select System setup, and
then press OK.
1
www.hp.com
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
X
System setup
X

HP LaserJet M1120 MFP Series – Copy
How do I? Steps to perform
7 Use the arrow buttons to select Paper setup, and
Copy on pre-printed letterhead or forms
(continued)
then press OK.
8 Use the arrow buttons to select Def. paper size, and
then press OK.
OK
HP LaserJet M1120 MFP
X
Paper setup
OK
HP LaserJet M1120 MFP
X
Def. paper size
9 Use the arrow buttons to select a media size, and then
press OK.
OK
HP LaserJet M1120 MFP
X
10 Press OK to save the selection
OK
HP LaserJet M1120 MFP
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
2
www.hp.com

HP LaserJet M1120 MFP Series – Copy
Make my copy look better
How do I? Steps to perform
1 On the product control panel, press More Copy
Adjust the copy quality for the current job
2 Use the arrow buttons to scroll through the quality
Settings twice to see the current quality setting for the
copy.
OK
HP LaserJet M1120 MFP
setting options.
OK
HP LaserJet M1120 MFP
3 Select a setting, and then press Start Copy to save
the selection and immediately start the copy job, or
press OK to save the selection without starting the job.
OK
X
X
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
HP LaserJet M1120 MFP
1
www.hp.com

HP LaserJet M1120 MFP Series – Copy
Reduce or enlarge the image
How do I? Steps to perform
1 On the product control panel, press More Copy
Reduce or enlarge copies for the current
job
Settings.
OK
HP LaserJet M1120 MFP
X
2 Use the arrow buttons to select Reduce/Enlarge, and
then press OK.
3 Select the size to which you would like to reduce or
enlarge the copies in this job.
NOTE: You must change the default media size in the
media input tray to match the output size, or part of your
copy might be cut off.
4 Press Start Copy to save the selection and
immediately start the copy job, or press OK to save
the selection without starting the job.
OK
HP LaserJet M1120 MFP
OK
HP LaserJet M1120 MFP
Reduce/Enlarge
X
X
© 2007 Copyright Hewlett-Packard
Development Company, L.P.
1
www.hp.com