QuickSpecs
HP M110 Access Point Series
Overview
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 1
HP M110 Access Point Series (Retired)
Models
HP M110 Access Point (US)
J9385B
HP M110 Access Point (WW)
J9388B
Key features
Entry-level access point
Single radio
IEEE 802.11a/b/g
Autonomous mode
Two external antennas
Product overview
HP M110 Access Point is an entry-level, single IEEE 802.11a/b/g radio device that can be configured to operate as an access point,
a wireless distribution system (WDS) bridge, or a full-spectrum IEEE 802.11 wireless LAN (WLAN) monitor. The M110 Access Point
supports up to two Virtual Service Communities, each with independent VLAN and wireless security profiles. It is plenum-rated and
powered by an IEEE 802.3af(PoE)source. The M110 access point is Wi-Fi Certified for WPA2, WPA, and WEP security and has
hardware-assisted AES and RC4 encryption.
Features and benefits
Quality of Service (QoS)
IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Diagnostic:
o Client event log records association, authentication, and DHCP events
o Packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format)
o Data rate matrix
RF management:
o Automatically selects channel on power-up and continuously improves channel selection based on background
interference scan
o Configurable background rogue scanning
o Automatically adjusts transmit power to reduce interference
Network management: SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618)
Embedded HTML management tool with secure access (SSL and VPN) Scheduled configuration and firmware upgrades
from central server
Connectivity
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports
IEEE 802.3af Power over Ethernet (PoE) support: simplifies deployment and dramatically reduces installation costs by
helping to eliminate the time and cost involved in supplying local power at each access point location
Mobility
Interoperability: Wi-Fi Alliance certifications, including IEEE 802.11g Wi-Fi and WPA2 to help ensure multivendor
interoperability
Virtual Service Communities (VSCs):
o Up to 2 SSIDs, each with a unique MAC address, and configurable SSID broadcasts
o Individual security profiles per VSC
QuickSpecs
HP M110 Access Point Series
Overview
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 2
o Configurable DTIM and minimum data rate per VSC
o Each VSC mapped to separate IEEE 802.1Q VLANs
o WMM and/or WMM-PS
o Security filter
o IP filter
AP client access control functions:
o IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
o MAC address authentication using local or RADIUS access lists
o RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
o RADIUS Client (RFC 2865 and 2866) with location-aware support
o Layer 2 wireless client isolation
Enhanced Security:
o Configurable Ethernet MAC and protocol filters
o WPA2, WPA, and WEP
o IEEE 802.1X PEAP WLAN authentication
o Hardware-assisted AES and RC4 encryption
Location flexibility:
o 100 mW radio and antenna diversity provide excellent range
o Configurable IEEE 802.11 a/b/g radio with external antenna connectors
o Plenum rated
o Centrally manageable
Security
Choice of IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2), or WPA: locks out unauthorized wireless access by
authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key
Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
Local wireless bridge client traffic filtering: when enabled, prevents communication between wireless devices
associated with the same access point
IEEE 802.1X: provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5,
TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic
between authenticated clients and the access point
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)*
Electronic and telephone support: limited electronic and telephone support is available from HP; refer to:
http://www.hp.com/networking/warranty for details on the support provided and the period during which support is
available
Software releases: refer to: http://www.hp.com/networking/warranty for details on the software releases provided and
the period during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl
Module, HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP E-MSM765 zl
Mobility Controller. For details, refer to the HP Software License, Warranty, and Support booklet at:
http://www.hp.com/networking/warranty.
QuickSpecs
HP M110 Access Point Series
Configuration
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 3
HP M110 Access Point Series accessories
Power Supply
HP MSM31x/MSM32x Power Supply
J9405B
See Configuration
Note:1
HP 1-port Power Injector
J9407B
See Configuration
Note:1
Configuration Rules:
Note 1
Localization required. (See Localization Menu)
External Antenna
HP 5 dBi Indoor/Outdoor Omnidirectional Antenna
J8441A
HP 8 dBi Outdoor Omnidirectional Antenna
J8444A
HP 3 dBi Dual Band Diversity Antenna
J8997A
HP 7 dBi Dual Band Directional Antenna
J8999A
Wireless Antenna
HP Dual Band Indoor Short Omnidirectional Antenna
J9401A
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
QuickSpecs
HP M110 Access Point Series
Technical Specifications
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 4
HP M110 Access Point (US) (J9385B)
HP M110 Access Point (WW) (J9388B)
Ports
1 RJ-45 autosensing 10/100 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex:
half or full
AP characteristics
Radios
Single (a/b/g)
Radio operation modes
Client access
AP operation modes
Autonomous
Wi-Fi Alliance
Certification
a/b/g Wi-Fi Certified
Physical characteristics
Dimensions
5(d) x 5.5(w) x 1.3(h) in. (12.7 x 13.97 x 3.3 cm)
Weight
2.0 lb. (0.91 kg)
Enclosure
Indoor, plenum rated
Environment
Operating temperature
32°F to 122°F (0°C to 50°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 176°F (-40°C to 80°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Shock and vibration
EN61373
Electrical characteristics
Description
IEEE 802.3af PoE compliant or 5 VDC from available AC power supply
Maximum power rating
5 W
Antenna connector
(2) RP-SMA with diversity
Antenna
(2) 2 dBi dual-band 2.4/5 GHz
Number of external
antennas
2
Frequency band and
operating channels
FCC
2.412 - 2.462 GHz (1-11 channels)
5.180 - 5.240 GHz (36-48 channels)
5.745 - 5.825 GHz (149-165 channels)
EN
2.412 - 2.472 GHz (1-13 channels)
5.180 - 5.240 GHz (36-48 channels)
Radio
FCC Part 15.247; FCC Part 15.407 (US)
Safety
UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
RF Exposure
FCC Bulletin OET-65C; RSS-102; EN 50385
Emissions
EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B
Notes
Maximum transmit power varies by country.
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (UN691E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UN692E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UN694E)
3-year, 24x7 SW phone support, software updates (UN693E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR919E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR920E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR921E)
4-year, 4-hour onsite, 13x5 coverage for hardware (US029E)
4-year, 4-hour onsite, 24x7 coverage for hardware (US030E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (US031E)
4-year, 24x7 SW phone support, software updates (US032E)
QuickSpecs
HP M110 Access Point Series
Technical Specifications
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 5
5-year, 4-hour onsite, 13x5 coverage for hardware (US033E)
5-year, 4-hour onsite, 24x7 coverage for hardware (US034E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (US035E)
5-year, 24x7 SW phone support, software updates (US036E)
3 Yr 6 hr Call-to-Repair Onsite (UW422E)
4 Yr 6 hr Call-to-Repair Onsite (UW423E)
5 Yr 6 hr Call-to-Repair Onsite (UW424E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR923E)
1-year, 24x7 software phone support, software updates (HR922E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HU323E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HU324E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HU325E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HU326E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HU327E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HU328E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HU329E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HU330E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
Radio characteristics: IEEE 802.11a
Data rate
6 Mbps
54 Mbps
Receiver sensitivity
-90 dBm
-72 dBm
Transmit power
20 dBm
16 dBm
Radio characteristics: IEEE 802.11b
Data rate
1 Mbps
11 Mbps
Receiver sensitivity
-90 dBm
-90 dBm
Transmit power
20 dBm
20 dBm
Radio characteristics: IEEE 802.11g
Data rate
6 Mbps
54 Mbps
Receiver sensitivity
-92 dBm
-72 dBm
Transmit power
20 dBm
16 dBm
Standards and protocols
(applies to all products in
series)
Mobility
IEEE 802.11a High Speed Physical Layer in the 5 GHz Band
IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band
IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band
IEEE 802.11i Medium Access Control (MAC) Security Enhancements
QuickSpecs
HP M110 Access Point Series
Accessories
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 6
HP M110 Access
Point Series accessories
Power Supply
HP MSM31x/MSM32x Power Supply
J9405B
HP 1-port Power Injector
J9407B
External Antenna
HP 5 dBi Indoor/Outdoor Omnidirectional Antenna
J8441A
HP 8 dBi Outdoor Omnidirectional Antenna
J8444A
HP 3 dBi Dual Band Diversity Antenna
J8997A
HP 7 dBi Dual Band Directional Antenna
J8999A
Wireless Antenna
HP Dual Band Indoor Short Omnidirectional Antenna
J9401A
QuickSpecs
HP M110 Access Point Series
Accessory Product Details
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 7
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP MSM31x/MSM32x
Power Supply (J9405A)
Physical characteristics
Dimensions
3.35(d) x 1.97(w) x 1.27(h) in. (8.5 x 5 x 3.22
cm)
Weight
0.88 lb. (0.4 kg)
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-4°F to 176°F (-20°C to 80°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Electrical characteristics
Voltage
100-240 VAC
Current
0.5/0.3 A
Frequency
50/60 Hz
Notes
Output voltage: 5 VDC
Services
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
HP 1-port Power Injector
(J9407A)
Physical characteristics
Dimensions
5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1
cm)
Weight
1 lb. (0.45 kg)
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 93%, noncondensing
Nonoperating/Storage
temperature
-4°F to 158°F (-20°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Voltage
100-240 VAC
Current
0.3/0.2 A
Frequency
50/60 Hz
Notes
IEEE 802.3af compliant
Safety
UL 60950; EN 60950
Emissions
EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class
B with FTP cabling
Notes
The 1-port power converter has 1 AC power cord input, 1 RJ-45
10/100/1000 Mbps port for data coming from the network infrastructure,
and 1 RJ-45 for data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet
to power the access point.
Services
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
QuickSpecs
HP M110 Access Point Series
Accessory Product Details
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 8
HP 5 dBi Indoor/Outdoor
Omnidirectional
Antenna (J8441A)
Electrical characteristics
Frequency range 1
2400 - 2500
Gain 1 dBi (with antenna
cable)
4.4
VSWR max
1.7:1
E-Plane (3 dB beamwidth)
31 degrees
H-Plane (3 dB beamwidth)
Omnidirectional
Polarization
Linear (vertical)
Impedance (Ohms)
50
RF connector
Reverse SMA (male)
Cable length
2.75 ft. (0.84 m)
Physical characteristics
Dimensions
11.5(h) in. (29.21 cm)
Wind surface area
0.08 sq. ft. (0.01 sq. m)
Wind survival
125.1 mph (201.13 km/hr)
Weight
0.30 lb. (0.14 kg)
Mounting style
Ceiling T-bar, I-beam, or mast
Enclosure
Polycarbonate
Environment
Operating temperature
-22ºF to 131ºF (-30ºC to 55ºC)
Nonoperating/Storage
temperature
-40ºF to 149ºF (-40ºC to 65ºC)
Services
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
HP 8 dBi Outdoor
Omnidirectional
Antenna (J8444A)
Electrical characteristics
Frequency range 1
2400 - 2500
Gain 1 dBi (with antenna
cable)
8
VSWR max
1.5:1
E-Plane (3 dB beamwidth)
13 degrees
H-Plane (3 dB beamwidth)
Omnidirectional
Polarization
Linear (vertical)
Impedance (Ohms)
50
RF connector
N (male)
Cable length
2.75 ft. (0.84 m)
Physical characteristics
Dimensions
25.25(h) in. (64.14 cm)
Wind surface area
0.11 sq. ft. (0.01 sq. m)
Wind survival
125 mph (201.13 km/hr)
Weight
0.5 lb. (0.23 kg)
Mounting style
Mast
Enclosure
Polycarbonate
Environment
Operating temperature
-22ºF to 131ºF (-30ºC to 55ºC)
Nonoperating/Storage
temperature
-40ºF to 149ºF (-40ºC to 65ºC)
Services
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
QuickSpecs
HP M110 Access Point Series
Accessory Product Details
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 9
HP 3 dBi Dual Band
Diversity Antenna
(J8997A)
Electrical characteristics
Frequency range 1
2400 - 2500
Gain 1 dBi (with antenna
cable)
3
Frequency range 2
4900 - 5990
Gain 2 dBi (with antenna
cable)
4
VSWR max
2.0:1
E-Plane (3 dB beamwidth)
60 degrees
E-plane radiation plots
2.45 GHz, E Plane
H-Plane (3 dB beamwidth)
Omnidirectional
H-plane radiation plots
2.45 GHz, H Plane
Impedance (Ohms)
50
Grounding
DC
RF connector
Reverse SMA (male)
Cable length
2.75 ft. (0.84 m)
Physical characteristics
Dimensions
6.16(d) x 3.66(w) x 0.89(h) in. (15.65 x 9.3 x
2.26 cm)
Weight
0.5 lb. (0.23 kg)
Mounting style
Ceiling grid
Enclosure
PVC/Acrylic
Environment
Operating temperature
-22ºF to 131ºF (-30ºC to 55ºC)
Nonoperating/Storage
temperature
-40ºF to 149ºF (-40ºC to 65ºC)
Services
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
HP 7 dBi Dual Band
Directional Antenna
(J8999A)
Electrical characteristics
Frequency range 1
2400 - 2500
Gain 1 dBi (with antenna
cable)
6.9
Frequency range 2
4900 - 5990
Gain 2 dBi (with antenna
cable)
7.7
VSWR max
2.0:1
E-Plane (3 dB beamwidth)
66 degrees
E-plane radiation plots
E Plane 2.45 GHz
H-Plane (3 dB beamwidth)
68 degrees
H-plane radiation plots
H Plane 2.45 GHz
Polarization
Linear (vertical)
Impedance (Ohms)
50
RF connector
Reverse SMA (male)
Cable length
2.75 ft. (0.84 m)
Physical characteristics
Dimensions
5.16(d) x 5.16(w) x 1.37(h) in. (13.11 x 13.11 x
3.48 cm)
Wind surface area
0.12 sq. ft. (0.01 sq. m)
QuickSpecs
HP M110 Access Point Series
Accessory Product Details
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 10
Wind survival
120 mph (193.08 km/hr)
Weight
0.5 lb. (0.23 kg)
Mounting style
Flush wall mount, articulating wall, or mast
Enclosure
PVC/Acrylic
Front-to-back ratio (dB)
10
Environment
Operating temperature
-22ºF to 131ºF (-30ºC to 55ºC)
Nonoperating/Storage
temperature
-40ºF to 149ºF (-40ºC to 65ºC)
Services
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
HP Dual Band Indoor
Short Omnidirectional
Antenna (J9401A)
Physical characteristics
Dimensions
3.78(h) in. (9.59 cm)
Base diameter
0.37 in. (0.93 cm)
Notes
2.1 dBi (2.45 GHz), 2.4 dBi (4.9 GHz), 2.6 dBi (5.25 GHz), 3.4 dBi (5.875 GHz)
Polarization: vertical, omnidirectional
VSWR 2:1 max. across all bands
Electrical characteristics
Connector
RP-SMA
Services
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
QuickSpecs
HP M110 Access Point Series
Summary of Changes
c04111622 — DA – 13973 Worldwide — Version 4 — July 24, 2015
Page 11
Date
Version History
Action
Description of Change
24-Jul-2015
From Version 3 to 4
Changed
This QuickSpecs was retired; no further updates will be
made.
20-Dec-2013
From Version 2 to 3
Added
Configuration was added.
04-Nov-2011
From Version 1 to 2
Added
Accessory Product Details was added.
To learn more, visit: www.hp.com/networking
© Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Loading...