HP Jetsend for Windows CE Devices Getting Started Guide

Getting

Started

Why install JetSend® for Windows CE Devices?

Installing JetSend for Windows CE Devices lets you take advantage of
JetSend communications protocol on your Microsoft® Windows®
CE-based device. With JetSend for Windows CE Devices loaded, you
can exchange documents, images, email, appointments, tasks, and
contact information with any other JetSend-enabled device—no
cables or special drivers needed.

Requirements for installation

The following table lists requirements for installing JetSend for
Windows CE Devices on your mobile device

INSTALLATION REQUIREMENTS

.

Mobile device

Desktop
computer



Storage memory for installation: 800 KB for
handheld PCs; 1300 KB for palm-size PCs.



Total memory (minimum) for operation: 4 MB
(The amount of memory used during operation
depends on the complexity of the document you
are exchanging.)



Microsoft Windows CE: Version 2.11 or greater.



Infrared capability: Infrared Data Association
(IrDA) 1.2. FIR (Fast Infrared) transfer speed is
recommended for best performance.



Windows 95, Windows 98, or Windows NT
Workstation 4.0.



Synchronization: Microsoft Windows CE
Services 2.2 or ActiveSync 3.0.



JetSend for Windows CE Devices setup
program.

Obtain JetSend for Windows CE Devices

JetSend for Windows CE Devices is available on the World Wide
Web. For download information, go to the JetSend website
(http://www.jetsend.hp.com

).

Install JetSend

1 Download the JetSend for Windows CE Devices setup program

from the JetSend website to your desktop computer.

2 Turn on your mobile device. If it is already turned on, save all

work and quit all programs.

3 Uninstall any previous versions of JetSend for Windows CE

Devices installed on your mobile device.

4 Establish a connection between the mobile device and the desktop

computer.

5 On your desktop computer, click Start, and then click Run.
6 Click Browse and select the setup program for JetSend for

Windows CE Devices.

7 Click OK to start the setup program.
8 Follow the instructions on the screen.
9 On the desktop computer, click Finish when the setup program has

completed. You do not need to restart the desktop computer or the
mobile device.

© Copyright Hewlett-Packard Company 2000. All rights reserved.

Publication number Z3944-90938 - Second Edition, February 2000

JetSend® is a registered trademark of Hewlett-Packard Company. JPEG is made available by the Independent JPEG Group
(IJG). Microsoft®, Microsoft Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation in the
U.S. and other countries. All other products mentioned herein may be trademarks, registered trademarks, or tradenames of
their respective holders.