HP Compaq 6530s, Compaq 6531s, Compaq 6535s, Compaq 6730s, Compaq 6735s Getting Started Guide

Getting Started

HP Compaq Notebook PC

Tagged for Accessibility

Looking for more user guides? They are on your computer.

HP is committed to reducing the environmental impact of our products and
printed user guides. As part of this effort, we are now putting product information
on your computer hard drive in Help and Support. We are also moving content
to the Web. This Getting Started guide provides setup steps and directs you to
additional information about your new product.

Tagged for Accessibility

Keep this product up to date with the latest drivers, patches,
and notifications. Sign up now at www.hp.com/go/alerts
to receive e-mail alert notifications.

Click Start > Help and Support > User Guides

E-mail Alert

Basic Setup

1 Unpack the box

✎

Computer color, features, and options may vary by computer model. The illustrations in
this guide may look slightly different from your computer.

*Batteries and power cords vary in appearance by country or region.

†

The modem cable is necessary only if you are using dial-up networking.

Getting Started 1

Component

AC adapter

1

Computer

2

Battery*

3

Component

Power cord*

4

Modem cable† (select models only)

5

Basic Setup

Å

WARNING: To reduce potential safety issues, use only the AC adapter or battery
provided with the computer, or a replacement AC adapter or battery provided by HP.

Å

WARNING: To reduce the risk of electric shock or damage to your equipment, observe
these practices:

■ Plug the power cord into an AC outlet that is easily accessible at all times.

■ Disconnect power from the computer by unplugging the power cord from the AC

outlet (not b

y unplugging the power cord from the computer).

■ If provided with a 3-pin attachment plug on your power cord, plug the cord into a

grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for
example, by attaching a 2-pin adapter. The grounding pin is an important safety
feature.

Leave the computer connected to external power until the battery light turns off.

Getting Started 2

2 Insert the battery

3 Connect the computer to external power

4 Open the computer

After the computer is turned on, the software setup process begins. The on-screen
instructions guide you through setting up and registering your computer. After you respond
to the setup prompt, you must complete the entire setup process without interruption.

✎

Please select your language carefully. On some models, the languages you do not
choose are deleted from the system and cannot be restored during software setup.

Getting Started 3

5 Turn on the computer

Basic Setup

6 Set up the software