HP BL460c User Manual

QuickSpecs

Overview

HP ProLiant BL460c Server Blade

Access Panel

Up to two Quad-Core or Dual-Core Intel® Xeon® 5000 sequence processors

Small form factor (SFF) hot-plug drive bays (standard BTO models)

Local I/O connector

Eight (8) PC2-5300, Fully Buffered DIMMs (DDR2-667) Memory Slots

HP Smart Array E200i Controller (optional battery-backed write cache) (standard BTO models)

Two Mezzanine slots

Internal USB Connector (standard BTO models)

What's New

Support for new Intel® Xeon® Dual-Core Low Voltage 5200 Sequence Processors Support for up to 64GB of Memory with 16GB REG PC2-5300 2x8GB 2r memory option kit Support for Entry (ETY) HP 120GB 1.5G SATA 5.4K SFF HDD

At A Glance

This document covers the HP ProLiant BL460c server blade only. For more information on HP BladeSystems c-Class Infrastructure and HP BladeSystem c-Class Interconnect Components, please see the following QuickSpecs:

HP BladeSystem c-Class Infrastructure QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html

HP BladeSystem c-Class Interconnect Components QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html

The HP ProLiant BL460c provides greater 2P x86 server blade density without compromise and maximum power-efficiency with flexibility and choice.

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 1

QuickSpecs

Overview

HP ProLiant BL460c server blade includes:

Processor:

Up to two Quad-Core Intel® Xeon® 5400 sequence processors Up to two Quad-Core Intel® Xeon® 5300 sequence processors Up to two Dual-Core Intel® Xeon® 5200 or 5100 sequence processors Supports up to 2 Dual-Core 3.33GHz, 1333 MHz FSB-1X6 MB Level 2 cache memory, and up to 2 Quad-3.00 GHz 1333MHz-2x6 MB Level 2 cache memory Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus

Memory:

Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz

NOTE:

64GB of Memory is supported with 80W processors and below. Not supported with 120W

processors

Supporting low-power memory Advanced ECC memory support Supporting memory interleaving (2x1); memory mirroring and online spare capacity.

Storage Controller:

Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an upgrade to 128MB cache (BBWC)) in standard BTO models. Supports RAID 0,1 in standard BTO models

NOTE:

attaching directly to SAN. Please note that this model does not replace any prior model offerings. The

feature listed above is not included in the standard Drive-less configure to order model. However, all

configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart

Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See

Factory Integrated Model section for more information

Internal Drive Support:

Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models

NOTE:

attaching directly to SAN. Please note that this model does not replace any prior model offerings. The

feature listed above is not included in the standard Drive-less configure to order model. However, all

configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart

Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See

Factory Integrated Model section for more information.

Network Controller:

Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management

NOTE:

information, see the "Network Controller" item in Standards Features section.

Mezzanine Support:

Two (2) additional I/O expansion slots via mezzanine card. Supports up to (2) mezzanine cards

Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic).

Ethernet NIC Mezzanine options for additional network ports

HP NC325m PCI Express Quad Port Gigabit Server Adapter for c-Class BladeSystem

NOTE:

connectivity on all four ports. If installed in mezzanine slot 1 of a half-height server blade, the NC325m will

provide connectivity on 2 of the 4 ports.

HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem

HP NC360m Dual Port 1GbE BL-c Adapter

HP NC364m Quad Port 1GbE BL-c Adapter

Drive-less model now available through CTO for customers not utilizing internal disk drives and

The Gigabit Ethernet adapters transmit from the server only at 2000 Mbps, full duplex per port. For more

The NC325m must be installed in mezzanine slot 2 of a half-height server blade to provide

NOTE:

If the NC364m is installed in mezzanine slot 1 of a half-height server, connectivity will be

provided on only 2 of the 4 ports

HP ProLiant BL460c Server Blade

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 2

QuickSpecs

HP ProLiant BL460c Server Blade

Overview

HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter

HP NC512m Dual Port 10GbE Multifunction BL-c Adapter

4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on

Mellanox technology

Internal USB Support:

One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models

NOTE:

attaching directly to SAN. Please note that this model does not replace any prior model offerings. The

feature listed above is not included in the standard Drive-less configure to order model. However, all

configure to order models offer optional support for small form factor (SFF) hot-plug drive bays, HP Smart

Array E200i Controller (with optional battery-backed write cache), and Internal USB Connector. See

Factory Integrated Model section for more information.

VMware ESX Server 3i and Citrix XenServer virtualization technology

Integrated Hypervisors:

VMware ESX Server 3i virtualization technology

Citrix XenServer virtualization technology

Form Factor:

HP ProLiant BL460c server blade plugs vertically into the BladeSystem c3000 and c7000 enclosures

Management:

Integrated Lights-Out 2 (iLO 2) Standard Blade Edition with virtual KVM and graphical remote console at no additional cost.

Operating Systems:

Supports Windows, Linux, Netware, and Solaris Operating Systems

Enclosures:

HP offers three different c-Class server blade enclosures to meet your individual needs:

The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL460c servers

plugged vertically.

The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL460c servers

plugged horizontally.

The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up

to 8 HP ProLiant BL460c servers plugged vertically. Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.

For additional enclosure information, please see:

http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html

Warranty:

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty.

NOTE:

regarding worldwide limited warranty and technical support is available at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Drive-less model now available through CTO for customers not utilizing internal disk drives and

Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Additional information

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 3

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

NOTE:

specifications, please visit:

Processor

For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and

Quad-Core Processor Option Kits

Quad-Core Intel® Xeon® Processor X5460 (3.160 GHz, 1333 FSB, 120W)

Quad-Core Intel® Xeon® Processor X5450 (3.00 GHz, 1333 FSB, 120W)

Quad-Core Intel® Xeon® Processor E5450 (3.0 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor E5440 (2.83 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor E5430 (2.66 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor E5420 (2.50 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor L5420 (2.50 GHz, 1333 FSB, 50W, LV)

Quad-Core Intel® Xeon® Processor E5410 (2.33 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor L5410 (2.33GHz, 1333FSB, 50W, LV)*

Quad-Core Intel® Xeon® Processor E5405 (2.0 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor X5365 (3.00 GHz, 1333 FSB, 120W)

Quad-Core Intel® Xeon® Processor X5355 (2.66 GHz, 1333 FSB, 120W)

Quad-Core Intel® Xeon® Processor E5345 (2.33 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor E5335 (2.00 GHz, 1333 FSB, 80W)

Quad-Core Intel® Xeon® Processor L5335 (2.00 GHz, 1333 FSB, 50W)

Quad-Core Intel® Xeon® Processor E5320 (1.86 GHz, 1066 FSB, 80W)

Quad-Core Intel® Xeon® Processor L5320 (1.86 GHz, 1066 FSB, 50W)

Quad-Core Intel® Xeon® Processor E5310 (1.60 GHz, 1066 FSB, 80W)

Dual-Core Processor Option Kits

Dual-Core Intel® Xeon® processor X5260 (3.33 GHz, 1333 FSB, 80W)

Dual-Core Intel® Xeon® processor L5240 (3.00 GHz, 1333 FSB, 40 W, LV)

Dual-Core Intel® Xeon® processor E5205 (1.86GHz, 1333 FSB, 65W)

Dual-Core Intel® Xeon® processor X5160 (3.00 GHz, 1333 MHz FSB, 65W)

Dual-Core Intel® Xeon® processor X5150 (2.66 GHz, 1333 MHz FSB, 65W)

Dual-Core Intel® Xeon® processor X5148 (2.33 LV GHz, 1333 MHz FSB, 40W,LV)

Dual-Core Intel® Xeon® processor X5140 (2.33 GHz, 1333 MHz FSB, 65W)

Dual-Core Intel® Xeon® processor X5130 (2.00 GHz, 1333 MHz FSB, 65W)

Dual-Core Intel® Xeon® processor X5120 (1.86 GHz, 1066 MHz FSB, 65W)

Dual-Core Intel® Xeon® processor X5110 (1.6 GHz, 1066 MHz FSB, 65W)

*Offered through Configure-To-Order only. See Factory Integrated Models section for more details.

NOTE:

5200 and 5100 Series processors are dual-core; Intel 5400 and 5300 Series processors are quadcore.

NOTE:

the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.

http://h71028.www7.hp.com/erc/downloads/4AA0-6087enw.pdf

Intel 5400, 5300, 5200 and 5100 series processors are 64-bit and support Intel VT. Intel.

For the Intel 5200, 5300 and 5400 series, the letter preceding the model number indicates

Upgradeability

Upgradeable to 2 processors

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 4

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

Cache Memory

Chipset

Memory

Network Controller

2 x 6 MB shared L2 cache (5400 Sequence)

1 x 6 MB L2 cache (5200 Sequence)

2 x 4 MB Level 2 cache memory (5300 Sequence

1 x 4 MB Level 2 cache memory (5100 Sequence)

Intel® 5000P Chipset

Type

Standard

Maximum

Two (2) embedded NC373i Multifunction Gigabit Server Adapters with TCP/IP Offload Engine for Microsoft Windows

One (1) additional 10/100 NIC dedicated to iLO 2 Management

NOTE:

port. However, within a Linux environment, the speed can be reduced or "throttled" using a feature available within the Linux operating system; see the white paper at:

http://h71028.www7.hp.com/ERC/downloads/4AA1-5513ENW.pdf

The Gigabit Ethernet adapters transmit from the server only at 2000 Mbps, full duplex per

PC2-5300 Fully Buffered DIMMs at 667 MHz

1 GB (2 x 512 MB) 2 GB (2 x 1 GB)

64 GB (8 x 8 GB)

NOTE: NOTE:

Not supported with 120W processors.

Memory must be installed in pairs. 64GB of Memory is supported with 80W processors and below.

for more information.

The 10 Gigabit KX-4 NC512m adapter transmits from the server only at 20 Gbps (20,000 Mbps), full duplex.

Once the adapter signal reaches the interconnect within the blade enclosure and communicates outside the blade enclosure to the LAN, the blade interconnect uplink types and settings determine the cable media, speed, duplex mode, and auto negotiation mode. Interconnects are available with Ethernet uplinks supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and 10Gb KX-4.

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 5

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

Multifunction Networking

I/O Expansion Slots

Integrated Manageability

The embedded multifunction NC373i combines standard Gigabit Ethernet networking, TCP/IP offload engine (TOE) for Microsoft Windows and Linux iSCSI boot capability into a single adapter.

TOE moves the processing of data in the TCP protocol stack from the server CPU to the network card, freeing CPU cycles for other activities. With TOE, network communications are improved, and server efficiency is increased. The NC373i offers TOE for Microsoft® Windows 2000 and 2003 environments. The Linux iSCSI network boot (iSCSI boot) allows the BL460c to boot from a remote operating system (OS) image located on a storage area network (SAN) within a Ref Hat or SUSE Linux environment. The BL460c uses an iSCSI firmware image (iSCSI boot option ROM) making the remote disk drive appear as a local, bootable C: drive. The BL460c is configured to connect to and boot from the iSCSI target disk on the network and download the OS image from the iSCSI target disk. The iSCSI boot option ROM is supplied by HP at no cost. The additional cost and mezzanine slot usage of an add-in iSCSI HBA card is not required. Additionally, the HP iSCSI boot solution includes scripts to significantly simplify the installation process.

Two I/O expansion mezzanine slots (One x8 and one x4)

Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard)

Storage Controller

Maximum Internal Storage

Graphics

Graphics Resolution Supported

HP Smart Array E200i Controller

NOTE:

not required. See Factory Integrated Models section for more information.

Hot Plug Serial Attach SCSI (SAS)

Hot Plug Serial ATA (SATA)

NOTE:

required. See Factory Integrated Models section for more information.

Integrated ATI RN-50 1600x1280x64K 16M color (32 MB DDR1 memory)

Resolution Color Depths

For customers who choose to configure a driveless model via CTO, a storage controller is

For customers who choose to configure a driveless model via CTO, internal storage is not

64 MB memory module supports RAID 0,1 Available upgrades: 128 MB with Battery-backed write cache

292 GB SAS

240 GB SATA

1600 x 1280, 64K, 256, 16 1280 x 1024, 16.7M, 64k, 256.16 1024 x 768, 16.7M, 64k, 256,16 800 x 600, 16,7M, 64k, 256, 16 640 x 480, 16,7M, 64k, 256, 16

2 x 146 GB Serial SCSI

2 x 120 GB Serial ATA

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 6

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

Fibre Channel Support

Two optional Fibre Channel HBAs are supported by the HP ProLiant BL460c. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits and must be ordered separately.

Two option kits

Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem (403621-B21)

Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex HBAs

QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)

Uses common drivers which means that customers can standardize on one QLogic driver whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic

Emulex and QLogic Fibre Channel HBAs feature:

Optimal performance utilizing PCI Express 4/2/1Gb/s auto negotiating speeds Dual-ports for redundant path connections Up to two FC HBAs per server blade providing redundant FC HBA support Optimized for HP StorageWorks and supported by third party SAN vendors Support for Microsoft® Windows® and Linux operating systems environments

Compatible SAN

HP ProLiant BL460c server blades are optimized for HP StorageWorks MSA, EVA and XP

HP ProLiant 460c server blades are compatible with select 3rd party SANs (please see blade storage page for more details:

class/storage.html

http://h18000.www1.hp.com/products/servers/proliant-bl/c-

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 7

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

Insight Control Management Suites for BladeSystem

Insight Control Environment for BladeSystem delivers foundation management for HP BladeSystem lifecycles, including hardware resource deployment, health monitoring, software version control, performance monitoring, vulnerability, scanning and patch management and power management.

HP Control Insight Environment for BladeSystem installs and licenses the following components by default using a wizard-based integrated installer:

HP Systems Insight Manager HP iLO Select Pack HP Insight Power Manager HP ProLiant Essentials Rapid Deployment Pack HP ProLiant Essentials Performance Management Pack HP ProLiant Essentials Vulnerability and Patch Management Pack HP ProLiant Essentials Virtual Machine Management Pack

Additional ProLiant Essentials software and management tools included on the Insight Control Management kit can be installed manually.

HP Server Migration Pack – Universal Edition HP Open Service Event Manager HP Instant Support Enterprise Edition

NOTE:

included in the Insight Control Management media kit.

NOTE:

Management DVD, which can be delivered with HP BladeSystem c-Class enclosures with a choice of licensing options. Licensing options include a free 30 day evaluation license for 8 servers (default option for every enclosure order), a full purchased license for 8 blade servers or a full purchased license for 16 blade servers). For additional information on HP c-Class Infrastructure please visit HP BladeSystem c-Class Infrastructure QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html

NOTE:

BladeSystem, HP Systems Insight Manager and Essentials software refer to:

http://www.hp.com/servers/proliantessentials

HP Server Migration Pack – Universal Edition can be installed from the SMP-Universal CD

Insight Control Environment for BladeSystem can be installed from the Insight Control

For additional product and licensing information about Insight Control Environment for

Server Management Stand Alone Software Product – ProLiant Essentials

HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery, imaging & deployment, monitoring, and management for Linux-based ProLiant server platforms. Built on the industry-leading HP Systems Insight Manager framework, this solution integrates open source technology with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the future with developing management technologies.

HP Insight Control management suites and most HP ProLiant Essentials include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. From more information about this service, please visit:

http://www.hp.com/services/insight

HP Systems Insight Manager

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.

Page 8

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

Integrated Lights-Out Advanced Pack

Integrated Lights-Out Select Pack

ProLiant Essentials Rapid Deployment Pack

Insight Power Manager (IPM)

Integrated Lights-Out Power Management Pack

ProLiant Essentials Server Migration Pack – Universal Edition

Upgrades the iLO 2 processor with comprehensive remote control including Virtual KVM remote graphical console, enhanced console sharing and replay, virtual media (floppy, CD/DVD, USB key), virtual folders, and enterprise security (directory services and two-factor authentication).

Upgrades the iLO 2 processor with enhanced console sharing and replay, virtual media (floppy, CD/DVD, USB key), virtual folders, historical power reporting, power capping and enterprise security (directory services and two-factor authentication) for servers managed using remote consoles available in iLO 2 Standard and iLO 2 Standard Blade Edition.

Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a complete deployment solution for HP ProLiant blade servers. RDP provides a central location to configure server hardware, deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant Support Pack drivers using images and scripted profiles.

Upgrades the single-server remote management capabilities of iLO Select/Advanced to include centralized reporting and policy-based management of power consumption and thermal output provided by the Insight Power Manager. IPM unifies all of this functionality within a single user interface – HP Systems Insight Manager.

Is energy-efficient management software that delivers centralized control, reliable security, and energy savings for your BladeSystem infrastructure. iPMP combines the total control of iLO 2 Advanced in the area of remote management with the energy monitoring and control of the Insight Power Manager to deliver a robust solution capable of full remote control and power management of ProLiant servers through a unified interface within HP Systems Insight Manager.

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following migrations:

ProLiant Essentials Performance Management Pack

The Vulnerability and Patch Management Pack

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

physical to ProLiant physical to virtual virtual to virtual virtual to ProLiant

NOTE:

Performance Management Pack (offered exclusively through the Insight Control suites) – a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources

Vulnerability and Patch Management Pack (offered exclusively through the Insight Control suites) – identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms, and other blended threats.

For more information, visit:

http://www.hp.com/go/migrate

Page 9

QuickSpecs

Standard Features

HP ProLiant BL460c Server Blade

Core Infrastructure Management

Virtual Machine Management Pack

SmartStart

Insight Management Agents

Virtual Machine Management Pack – provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.

NOTE:

ProLiant Essentials Value Packs. Refer to:

http://www.hp.com/servers/proliantessentials/vpm

ProLiant Essentials Value Pack product QuickSpecs for more information.

NOTE:

7 Software Technical Support and Update Service. If you have any questions about this service please visit the HP website at:

http://www.hp.com/services/insight

SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. For more information, please visit the SmartStart Web site at:

http://www.hp.com/servers/smartstart

SmartStart version supported (minimum): SmartStart 7.60

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Flexible and volume quantity license kits are available for

or the various

Selected software packages listed here include one year of 24 x

Subscriber's Choice

ProLiant Support Packs and ROMPaq, software

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at:

http://www.hp.com/servers/manage

Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides software and driver change notifications for ProLiant products. Sign up at:

http://www.hp.com/go/subscriberschoice

and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available through ProLiant Support Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from software and drivers download pages website at:

http://www.hp.com/go/support

DA - 12518 U.S. QuickSpecs — Version 27 — 5/12/2008

Page 10

+ 23 hidden pages