Serial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating and others becoming more
complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability and accessibility are more
critical than ever. Today's organizations consist of different kinds of environments. Enterprise data centers must be online 24X7, fulfill
requests from numerous users simultaneously, and allow for constant growth and expansion while in operation. Other customer
environments require high capacity storage and high data availability for low I/O environments. HP's portfolio of SAS drives meets all
these demands.
What's New
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
Models
HP SAS Hot Plug SmartDrive Carriers for Gen8 Servers only
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
DA - 12244 Worldwide — Version 44 — December 9, 2013
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP SAS Hot Plug Drives
NOTE:
These drives are not supported by Gen8 servers
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP SAS Non-Hot Plug Drives
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive
HP SAS Quick Release Drives
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Quick Release Dual Port ENT 3yr Warranty Hard Drive
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 2
QuickSpecs
Overview
HP SAS Hard Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
HP 4TB 6G SAS 7.2k rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Quick-release Dual Port Midline 1yr Warranty Hard Drive
NOTE:
Refer to the appropriate server QuickSpecs for full compatibility details
574758-B21
585980-B21
697956-B21
574761-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 3
QuickSpecs
Standard Features
HP SAS Hard Drives
What is SAS?
Drive Quality and
Performance
Performance
Serial Attached SCSI (SAS) is the evolution of the SCSI interface. SAS Enterprise drives satisfy the
enterprise data center requirement of scalability, performance, reliability and manageability, while
providing an enterprise storage infrastructure for both enterprise SAS drives and SATA disk drives. SAS
Midline drives provide the lowest dollars per gigabyte and economical reliability and performance. The SAS
interface is compatible with SATA devices. This compatibility provides users with unprecedented choices
for server and storage subsystem deployment
Today's distributed enterprise is seeing larger, more complex applications, an increase of mission-critical
data moving to the server, increasing demand for transaction processing and critical server consolidation.
In this environment, storage has become a critical component of the information system, significantly
defining both the systems reliability and performance. This is why HP drives undergo an intense
qualification process that eliminates firmware and O/S incompatibilities. All drive firmware is specific to
our drives and is designed to maximize both functionality and compatibility. All drives are proven to
perform in the HP systems for which they were designed.
While selecting the drives in our Enterprise portfolio, only those drives whose performance is suitable for
an enterprise environment are selected through the HP qualification process and are labeled "best-inclass." All our Enterprise drives are proven to be reliable and tuned for optimum performance in the HP
equipment for which they were designed. The drives in our Midline portfolio undergo a similar qualification
process to ensure that you get the economical reliability and performance you need for your low workload
(less than 40% I/O) environments.
Only those drives whose performance is suitable for an enterprise environment are selected through the
HP qualification process and are labeled "best-in-class." All our drives are proven to be reliable and tuned
for optimum performance in the HP equipment for which they were designed.
Pre-Failure Alert
Integration
When used in conjunction with a SMART Array Controller and Systems Insight Manager, the SMART capable
firmware in HP hard drives enables extensive fault prediction capabilities. If potential problems develop in
one of the drives, the Smart Array Controller, Systems Insight Manager and/or SMART hard disk drive lets
you know in advance so you can have the drive replaced, before it fails, under warranty.
NOTE:
All drives are protected by a Pre-Failure Alert when used with a HP Smart Array controller and
Systems Insight Manager, allowing hard drives to be replaced before failure under warranty. In addition,
all drives are covered by a one or three-year limited on-site warranty period for the system in which they
are installed. The drive warranty is automatically uplifted when used in a server or MSA for which a Care
Pack is purchased. Please see the Support Services section below for additional services.
Many issues customers have with third party drives are "simple" integration issues. When buying from
another supplier, there is no guarantee that a drive has been correctly set for proper operation with
ProLiant servers and storage systems. These incompatibilities can create problems in configuration, can
rob your system of performance, or at their worst, can cause you to lose data. HP hard drives are
specifically designed and tested for flawless operation in your HP equipment. The integration of hard
drives in HP systems means that cables, SCSI ID settings, termination, hot plug drive trays and firmware
are right for your ProLiant server or storage system.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 4
QuickSpecs
Standard Features
HP SAS Hard Drives
Support Matrix
Warranty
Please see the following URL for the latest list of supported servers and enclosures:
http://www.hpproliantoptions.com/
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the system
in which they are installed.
SAS Midline hard drives have a 1 year limited warranty regardless of the warranty period for the system in
which they are installed.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 5
QuickSpecs
Service and Support
HP SAS Hard Drives
Service and Support
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services
Related HP Care Pack Services to enhance your HP product experience
Related Services
HP Technology Services
HP Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive on
site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Center
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months.
Delivers secure remote monitoring and support for HP servers and storage, 24x7 at no additional cost.
Available as part of HP Warranty, Care Pack and Service Contract offers.
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements. Supplies and consumable parts will not be provided as part of this service;
standard warranty terms and conditions apply. Parts and components that have exceeded their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 6
QuickSpecs
Service and Support
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms
and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that
have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded
maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating
manual or the technical data sheet are not eligible for the defective media retention service feature option.
HP SAS Hard Drives
For more information
To learn more on services for HP ESSN Options, please contact your HP sales representative or HP
Authorized Channel Partner. Or visit:
www.hp.com/services/bladesystem
http://www.hp.com/services/proliant
or
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 7
QuickSpecs
Technical Specifications
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
HP SAS Hard Drives
Transfer rate
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) SC Dual Port
Enterprise 3yr Warranty
Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
718162-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
1,200,243MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.3 ms
4.6 ms
8.9 ms
10,000 rpm
512
2,344,225,968
HP 900GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652589-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
900,185MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.21 ms
3.8 ms
7.4 ms
10,000 rpm
512
1,758,174,768
Page 8
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 600GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652583-B21
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
50° to 95° F (10° to 35° C)
600,127MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.3 ms
4.0 ms
8.0 ms
10,000 rpm
512
1,172,123,568
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) Quick
Release Dual Port ENT 3yr
Warranty Hard Drive
718164-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
1,200,243MB
0.740 in (18.8 mm)
2.909 in (73.9 mm)
3.945 in (100.2 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.3ms
4.6ms
8.9ms
10,000rpm
512
2,344,225,968
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 9
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 450GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652572-B21
652564-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
450,098MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
300,000MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.3 ms
4.0 ms
8.0 ms
10,000 rpm
512
879,097,968
0.3 ms
4.0 ms
8.0 ms
10,000 rpm
512
585,937,500
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 10
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652611-B21
652605-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
300,000MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
146,815MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.4 ms
2.9 ms
5.3 ms
15,000 rpm
512
585,937,500
0.4 ms
3.0 ms
7.0 ms
15,000 rpm
512
286,749,488
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 11
QuickSpecs
Technical Specifications
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
HP SAS Hard Drives
Transfer rate
HP 1TB 6G SAS 7.2K rpm
SFF (2.5-inch) SC Midline
1yr Warranty Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
652749-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
1,000,204MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.7 ms
8.7 ms
17.16 ms
7200 rpm
512
1,953,525,168
HP 500GB 6G SAS 7.2K rpm
SFF (2.5-inch) SC Midline
1yr Warranty Hard Drive
652745-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
500,107MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.7 ms
8.7 ms
17.16 ms
7200 rpm
512
976,773,168
Page 12
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature
(System Inlet Air
Temperature)
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
Application
Transfer rate
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
652620-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
50° to 95° F (10° to 35° C)
600,127MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2 ms
3.5 ms
6.8 ms
15000 rpm
512
1,172,123,568
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 13
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652615-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
450,098MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2 ms
3.5 ms
6.8 ms
15000 rpm
512
879,097,968
Transfer rate
HP 4TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
695510-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
4,000,787MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.7 ms
8.5 ms
15.7 ms
7200 rpm
512
7,814,037,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 14
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 3TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
652766-B21
Operating Temperature
(System Inlet Air
Temperature)
NOTE:
To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
NOTE:
version 5.0 or later is required for the following controllers:
(Maximum)
To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
50° to 95° F (10° to 35° C)
3,000,592MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.7 ms
8.3 ms
15.7 ms
7200 rpm
512
5,860,533,168
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 15
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 2TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
652757-B21
652753-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
2,000,398MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
1,000,204MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.7 ms
8.5 ms
18.2 ms
7200 rpm
512
3,907,029,168
0.7 ms
8.5 ms
18.2 ms
7200 rpm
512
1,953,525,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 16
QuickSpecs
Technical Specifications
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
HP SAS Hard Drives
Transfer rate
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
718160-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
1,200,243MB
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.3 ms
4.6 ms
8.9 ms
10,000 rpm
512
2,344,225,968
HP 900GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
619291-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
900,185,481,216
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.21 ms
3.57 ms
7.30 ms
10,000 rpm
512
1,758,174,768
Page 17
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 600GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
581286-B21
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
50° to 95° F (10° to 35° C)
600,127,266,816
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.4 ms
4.0 ms
8.0 ms
10,000 rpm
512
1,172,123,568
HP 450GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
581284-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
450,098,159,616
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.4 ms
4.0 ms
8.0 ms
10,000 rpm
512
879,097,968
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 18
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
SFF (2.5-inch) Hot Plug
Enterprise 3 yr Warranty
Hard Drive
HP 300GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
627117-B21
507127-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
300,000,000,000
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
300,000,000,000
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.40 ms
2.9 ms
5.30 ms
15,000 rpm
512
585,937,500
0.20 ms
4.0 ms
7.45 ms
10,000 rpm
512
585,937,500
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 19
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
SFF (2.5-inch) Hot Plug
Enterprise 3 yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
627117-B21
512547-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
300,000,000,000
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
146,815,737,856
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.40 ms
2.9 ms
5.30 ms
15,000 rpm
512
585,937,500
0.4 ms
3.0 ms
7.0 ms
15,000 rpm
512
286,749,488
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 20
QuickSpecs
Technical Specifications
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
HP SAS Hard Drives
Transfer rate
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
516828-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
600,127,266,816
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2ms
3.5ms
6.8ms
15,000rpm
512
1,172,123,568
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
516816-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
450,098,159,616
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.2ms
3.5ms
6.8ms
15,000rpm
512
879,097,968
Page 21
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
516814-B21
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
50° to 95° F (10° to 35° C)
300,000,000,000
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2ms
3.5ms
6.8ms
15,000rpm
512
585,937,500
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Application
Transfer rate
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 22
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 1TB 6G SAS 7.2K rpm
SFF (2.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
HP 500GB 6G SAS 7.2K rpm
SFF (2.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
605835-B21
507610-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
1,000,204,886,016
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
500,107,862,016
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.5 ms
8.2ms
17.55 ms
7,200 rpm
512
976,773,168
0.5 ms
8.2ms
17.55 ms
7,200 rpm
512
976,773,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 23
QuickSpecs
Technical Specifications
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
HP SAS Hard Drives
Transfer rate
HP 4TB 6G SAS 7.2K rpm
LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
693689-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
NOTE:
version 5.0 or later is required for the following controllers:
(Maximum)
To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
4,000,787MB
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.7 ms
8.5 ms
15.7 ms
7,200 rpm
512
7,814,037,168
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 24
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 3TB 6G SAS 7.2K rpm
LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
625031-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
NOTE:
version 5.0 or later is required for the following controllers:
(Maximum)
To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
3,000,592,982,016
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.5 ms
<8.1 ms
15.5 ms
7,200 rpm
512
5,860,533,168
HP 2TB 6G SAS 7.2K rpm
LFF (3.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
507616-B21
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
2,000,398,934,016
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.5 ms
8.5 ms
16.2 ms
7,200 rpm
512
3,907,029,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 25
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 1TB 6G SAS 7.2K rpm
LFF (3.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
507614-B21
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
50° to 95° F (10° to 35° C)
1,000,204,886,016
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.5 ms
8.5 ms
16.2 ms
7,200 rpm
512
1,953,525,168
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Application
Transfer rate
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 26
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 600GB 6G SAS 10K rpm
SFF (2.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm
SFF (2.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
590698-B21
537809-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
600,127,266,816
0.591 in (15.00 mm)
2.750 in (69.85 mm)
3.937 in (100.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
300,000,000,000
0.591 in (15.00 mm)
2.750 in (69.85 mm)
3.937 in (100.0 mm)
SAS
6 Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.4 ms
4.0 ms
8.0 ms
10,000 rpm
512
1,172,123,568
0.20 ms
4.0 ms
7.45 ms
10,000 rpm
512
585,937,500
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 27
QuickSpecs
Technical Specifications
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
HP SAS Hard Drives
Transfer rate
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
516830-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
600,127,266,816
1.028 in (26.1 mm)
4.0 in (101.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2ms
3.5ms
6.8ms
15,000 rpm
512
1,172,123,568
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516826-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
450,098,159,616
1.028 in (26.1 mm)
4.0 in (101.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.2ms
3.5ms
6.8ms
15,000 rpm
512
879,097,968
Page 28
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516824-B21
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
50° to 95° F (10° to 35° C)
300,000,000,000
1.028 in (26.1 mm)
4.0 in (101.6 mm)
5.787 in (147.0 mm)
SAS
3Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2ms
3.5ms
6.8ms
10,000rpm
512
585,937,500
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
Application
Transfer rate
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 29
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) Quickrelease Dual Port ENT 3y
Warranty Hard Drive
HP 300 GB 6G SAS 10K SFF
(2.5-inch) Quick-release
Dual Port ENT 3y
Warranty Hard Drive
697572-B21
574879-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
(Maximum)
1,200,243MB
0.740 in (18.8 mm)
2.909 in (73.9 mm)
3.945 in (100.2 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
300,000,000,000
0.740 in (18.8 mm)
2.909 in (73.9 mm)
3.945 in (100.2 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
4.6ms
8.9ms
8.0ms
10,000rpm
512
2,344,225,968
0.3ms
4.0ms
8.0ms
10,000rpm
512
585,937,500
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 30
QuickSpecs
Technical Specifications
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
HP SAS Hard Drives
Transfer rate
HP 600 GB 6G SAS 15K LFF
(3.5-inch) Quick-release
Dual Port ENT 3y
Warranty Hard Drive
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
574758-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
(Maximum)
600,127,266,816
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.2ms
3.5ms
6.8ms
15,000 rpm
512
1,172,123,568
HP 300 GB 6G SAS 15K LFF
(3.5-inch) Quick-release
Dual Port ENT 3y
Warranty Hard Drive
585980-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
(Maximum)
300,000,000,000
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
0.2ms
3.5ms
6.8ms
15,000 rpm
512
585,937,500
Page 31
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature
(System Inlet Air
Temperature)
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
Application
Transfer rate
HP 4TB 6G SAS 7.2k rpm
LFF (3.5-inch) Quickrelease Dual Port MDL 1y
Warranty Hard Drive
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
697956-B21
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
NOTE:
version 5.0 or later is required for the following controllers:
(Maximum)
To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
50° to 95° F (10° to 35° C)
4,000,787MB
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
0.7 ms
8.5 ms
15.7 ms
7,200 rpm
512
7,814,037,168
HP 2TB 6G SAS 7.2K rpm
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
574761-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Capacity
2,000,398,934,016
Page 32
QuickSpecs
Technical Specifications
HP SAS Hard Drives
LFF (3.5-inch) Quickrelease Dual Port MDL 1yr
Warranty Hard Drive
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Height
Width
Depth
Interface
Transfer Rate
Synchronous
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
(System Inlet Air
Temperature)
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
(Maximum)
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
6Gb/sec
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
50° to 95° F (10° to 35° C)
. To recycle your product, please go to:
or contact your nearest HP sales office.
0.7 ms
8.5 ms
18.2 ms
7,200 rpm
512
3,907,029,168
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at:
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
http://www.hp.com/go/green
. These instructions may be
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 33
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.