HP 5400 ZL, 5406-48G zl, 5412-92G zl, 5406 zl, 5412 zl Quickspecs

HP 5406-48G zl Switch

1

Power and Fault LEDs

6

LED Mode Select button and indicator LEDs

2

Locator LED

7

Console Port

3

Reset and Clear buttons

8

Auxiliary Port

4

Self Test LED

9

Module Link and Mode LEDs

5

Status LEDs for the Fans, Power Supplies, and Switch Modules

10

Switch Modules and slots with Link and Mode LEDs for each
port located on each module

HP 5406-48G zl Switch Rear View

1

Grounding lug mounting holes

3

AC power connector

2

Power and Fault LEDs

4

Slot for installing optional redundant power supply

5

External PoE power connectors

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 1

HP 5412-92G zl Switch

1

Power and Fault LEDs

6

LED Mode Select button and indicator LEDs

2

Locator LED

7

Console Port

3

Reset and Clear buttons

8

Auxiliary Port

4

Self Test LED

9

Module Link and Mode LEDs

5

Status LEDs for the Fans, Power Supplies, and Switch Modules

10

Switch Modules and slots with Link and Mode LEDs for each
port located on each module

HP 5412-92G zl Switch Rear View

1

Grounding lug mounting holes

3

Slot for installing optional redundant power supply

2

Power and Fault LEDs

4

AC power connector

5

External PoE power connectors

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 2

Models

HP 5406 zl Switch with Premium Software

J9642A

HP 5412 zl Switch with Premium Software

J9643A

HP 5406-44G-PoE+-2XG v2 zl Switch with Premium Software

J9533A

HP 5412-92G-PoE+-2XG v2 zl Switch with Premium Software

J9532A

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software

J9539A

HP 5412-92G-PoE+-4G v2 zl Switch with Premium Software

J9540A

HP 5406 8p 10GBASE-T 8p 10GbE SFP+ v2 zl Switch with Premium Software

J9866A

Key Features

Advanced access layer, distribution, and core
Integrated L2 to L4 intelligent edge feature set
Enterprise-class performance and security
HP AllianceOne integrated
Scalable 10/100/1000 and 10GbE connectivity

Product overview

The HP 5400 zl Switch Series consists of advanced intelligent switches in the HP modular chassis product line, which includes 6-slot
and 12-slot chassis and associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable
ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented
in a scalable yet granular fashion. With 10/100, Gigabit Ethernet, and 10 Gigabit Ethernet interfaces; choice of PoE+ and non-PoE;
integrated Layer 3 features; and HP AllianceOne solutions, the 5400 zl switch series offers excellent investment protection, flexibility,
and scalability, as well as ease of deployment, operation, and maintenance.

Features and Benefits

Software-defined networking

OpenFlow

supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths

Quality of Service

(QoS)

Advanced classifier-based QoS

classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority
level and rate limit to selected traffic on a per-port or per-VLAN basis

Layer 4 prioritization

enables prioritization based on TCP/UDP port numbers

Traffic prioritization

allows real-time traffic classification into eight priority levels mapped to eight queues

Bandwidth shaping

Port-based rate limiting

provides per-port ingress-/egress-enforced increased bandwidth

Classifier-based rate limiting

uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port

Guaranteed minimum

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 3

provides per-port, per-queue egress-based reduced bandwidth

Class of Service

(CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ

Management

Remote intelligent mirroring

mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl,
5400 zl, or 3500 Switch located anywhere on the network

RMON, XRMON, and sFlow v5

provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications

Uni-Directional Link Detection (UDLD)

monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional
link into a unidirectional one; this prevents network problems such as loops

Management simplicity

provides common software features and CLI implementation across all HP ProVision-based switches (including the zl and yl
switches)

Command authorization

leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents
activity

Friendly port names

allow assignment of descriptive names to ports

Dual flash images

provide independent primary and secondary operating system files for backup while upgrading

Multiple configuration files

can be stored to the flash image

NEW

Comware CLI

Comware-compatible CLI

bridges the experience of Comware CLI users who are using the ProVision software CLI

Display and fundamental Comware CLI commands

are embedded in the switch CLI as native commands; display output formatted as on Comware-based switches;
fundamental commands provide a Comware-familiar initial switch setup

Configuration Comware CLI commands

entered Comware CLI configuration commands elicit CLI help formulating the correct ProVision software CLI command

Connectivity

IEEE 802.3az Energy Efficient Ethernet

lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)

IEEE 802.3af Power over Ethernet (PoE)

provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and
security cameras

IEEE 802.3at Power over Ethernet Plus

provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless
access points, and advanced pan/zoom/tilt security cameras

Prestandard PoE support

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 4

detects and provides power to prestandard PoE devices; see the list of supported devices in the product FAQ at

www.hp.com/networking

High-density port connectivity

provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per
system

Jumbo frames

on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery
services

Auto-MDIX

automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

IPv6

IPv6 host

enables switches to be managed in an IPv6 network

Dual stack (IPv4 and IPv6)

transitions from IPv4 to IPv6, supporting connectivity for both
protocols

MLD snooping

forwards IPv6 multicast traffic to the appropriate interface

IPv6 ACL/QoS

supports ACL and QoS for IPv6 network traffic

IPv6 routing

supports static and OSPFv3 routing protocols

6in4 tunneling

supports encapsulation of IPv6 traffic in IPv4 packets

Performance

High-speed, high-capacity architecture

1 Tbps crossbar switching fabric provides intra-module and inter-module switching with 585.6 million pps throughput on the
purpose-built ProVision ASICs

Selectable queue configurations

allows for increased performance by selecting the number of queues and associated memory buffering that best meet the
requirements of the network applications

Resiliency and high availability

NEW Virtual Router Redundancy Protocol (VRRP)

allows groups of two routers to dynamically back each other up to create highly available routed environments for IPv4 and IPv6
networks

IEEE 802.1s Multiple Spanning Tree Protocol

provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D
Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP
port trunking

support up to 144 trunks, each with up to eight links (ports) per trunk

Distributed trunking

enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect
to two switches using one logical trunk for redundancy and load sharing

Optional redundant power supply (HP 5400 series)

provides uninterrupted power and allows hot-swapping of the redundant power supplies when installed

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 5

Hot-swappable modules (5400 zl series)

permits modules, mini-GBICs, and power supplies in a redundant power supply configuration to be added or swapped without
interrupting the network

Sparing simplicity

HP zl-common accessories (interface modules and power supplies)

Uplink Failure Detection

provides active-standby network path redundancy for servers that are configured for active-standby NIC teaming

NEW SmartLink

provides easy-to-configure link redundancy of active and standby links

Layer 2 switching

VLAN support and tagging

supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously

IEEE 802.1v protocol VLANs

isolate select non-IPv4 protocols automatically into their own VLANs

GARP VLAN Registration Protocol

allows automatic learning and dynamic assignment of VLANs

IEEE 802.1ad Q-in-Q

increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed
campus or metro network

MAC-based VLAN

provides granular control and security; uses RADIUS to map a MAC
address/user to specific VLANs (requires v2 modules)

Rapid Per-VLAN Spanning Tree (RPVST+)

allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+

HP switch meshing

dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent
Layer 3 routing with v2 modules

Layer 3 services

User Datagram Protocol (UDP) helper function

allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents
server spoofing for UDP services such as DHCP

Loopback interface address

defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability

Route maps

provide more control during route redistribution; allow filtering and altering of route metrics

Layer 3 routing

Static IP routing

provides manually configured routing for both IPv4 and IPv6 networks

Routing Information Protocol (RIP)

provides RIPv1 and RIPv2 routing

OSPF

provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing

Policy-based routing

uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 modules)

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 6

Border Gateway Protocol (BGP)

provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible

Security

Access control lists (ACLs)

provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on
per-VLAN or per-port basis

Multiple user authentication methods

IEEE 802.1X users per port

provides authentication of multiple IEEE 802.1X users per port

Web-based authentication

authenticates from a Web browser for clients that do not support IEEE 802.1X supplicant

MAC-based authentication

client is authenticated with the RADIUS server based on the client's MAC address

Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port

switch port accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications

Virus throttling

detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the
routed VLANs or bridged interfaces without requiring external appliances

DHCP protection

blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks

Secure management access

securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3

USB Secure Autorun (requires HP PCM+)

deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering

Switch CPU protection

provides automatic protection against malicious network traffic trying to shut down the switch

ICMP throttling

defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic

Identity-driven ACL

enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each
authenticated network user

STP BPDU port protection

blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks

Dynamic IP lockdown

works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing

Dynamic ARP protection

blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data

STP Root Guard

protects the root bridge from malicious attacks or configuration mistakes

Detection of malicious attacks

monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks
is detected

Port security

allows access only to specified MAC addresses, which can be learned or specified by the administrator

MAC address lockout

prevents particular configured MAC addresses from connecting to the network

Source-port filtering

allows only specified ports to communicate with each other

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 7

RADIUS/TACACS+

eases switch management security administration by using a password authentication server

Secure Shell

encrypts all transmitted data for secure remote CLI access over IP networks

Secure Sockets Layer (SSL)

encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

Secure FTP

allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file

Management Interface Wizard

helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level

Switch management logon security

can require either RADIUS or TACACS+ authentication for secure switch CLI logon

Security banner

displays a customized security policy when users log in to the switch

Convergence

IP multicast routing

includes PIM Sparse and Dense modes to route IP multicast traffic

IP multicast snooping

(data-driven IGMP)

automatically prevents flooding of IP multicast traffic

LLDP-MED (Media Endpoint Discovery)

is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network
devices such as IP phones

PoE allocations

support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient
energy savings

NEW

Auto VLAN configuration for voice

RADIUS VLAN: uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones
CDPv2: uses CDPv2 to configure legacy IP phones

NEW Local MAC Authentication

assigns attributes such as VLAN and QoS using locally configured profile that can be a list of MAC prefixes

Warranty and support

Lifetime Warranty 2.0

advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†

Electronic and telephone support (for Lifetime Warranty 2.0)

limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support is available from HP for the entire warranty period; to reach our support centers, refer to

www.hp.com/networking/contact-support

; for details on the duration of support provided with your product purchase, refer to

www.hp.com/networking/warrantysummary

Software releases

to find software for your product, refer to

www.hp.com/networking/support

; for details on the software releases available with

your product purchase, refer to

www.hp.com/networking/warrantysummary

†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 8

the Software license and hardware warranty statements at:

www.hp.com/networking/warranty

.

QuickSpecs

HP 5400 zl Switch Series

Overview

DA - 12436 North America — Version 34 — December 9, 2014

Page 9

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP 5406 zl Switch with Premium Software

J9642A

1 Power Supply required
4U - Height

See Configuration

Note:4

HP 5406-44G-PoE+-2XG v2 zl Swch w Pm SW

J9533A

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included (min=0 \ max=2 SFP+
Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height

See Configuration

Note:1, 5, 9

PDU CABLE NA/MEX/TW/JP

J9533A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9533A#B2C

C15 PDU Jumper Cord (ROW)C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power CordHigh Volt Switch to Wall Power Cord

J9533A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406 8p10GT 8p10GE Swch and Psw

J9866A

8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height

See Configuration

Note:1, 3, 5, 9

PDU CABLE NA/MEX/TW/JP

J9866A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9866A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9866A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406-44G-PoE+-4G v2 zl Swch w Prm SW

J9539A

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod included (min=0 \ max=4 SFP Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height

See Configuration

Note:2, 5, 9

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 10

PDU CABLE NA/MEX/TW/JP

J9539A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9539A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9539A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406 8p10GT 8p10GE Swch and Psw

J9866A

8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height

See Configuration

Note:1, 5, 9

PDU CABLE NA/MEX/TW/JP

J9866A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9866A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9866A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412 zl Switch with Premium Software

J9643A

2 Power Supplies required
7U - Height

See Configuration

Note:4

HP 5412-92G-PoE+-2XG v2 zl Swch w Pm SW

J9532A

92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+
Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height

See Configuration

Note:1, 5, 9

PDU CABLE NA/MEX/TW/JP

J9532A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9532A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9532A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 11

HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW

J9540A

92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height

See Configuration

Note:2, 5, 9

PDU CABLE NA/MEX/TW/JP

J9540A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9540A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9540A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1

The following Transceivers install into this Chassis :
HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 SFP+ SFP+ 1m Direct Attach Cable

J9281B

HP X242 SFP+ SFP+ 3m Direct Attach Cable

J9283B

HP X242 SFP+ SFP+ 7m Direct Attach Cable

J9285B

HP X244 XFP SFP+ 1m Direct Attach Cable

J9300A

HP X244 XFP SFP+ 3m Direct Attach Cable

J9301A

HP X244 XFP SFP+ 5m Direct Attach Cable

J9302A

HP X242 SFP+ 10m DAC Cable

J9286B

HP X242 SFP+ 15m DAC Cable

J9287B

Note 2

The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 12

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X111 100M SFP LC FX Transceiver

J9054C

Note 4

If Switch is ordered in a Rack, Then #B2B, or #B2C is defaulted on the Power Supply's. (Optional when Switch is not
Racked. See Drop down remark in "Power Supplies" section.)

Note 5

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in North America, Mexico Taiwan, and Japan)

Note 9

Localization required on orders without #B2B, #B2C, #B2D or #B2E options.

Box Level Integration CTO Models

CTO Solution Sku

HP 54xx CTO Switch Solution

J9809A

SSP trigger sku

See Configuration

Note:7

CTO Switch Chassis

HP 5406 zl Switch with Premium Software

J9642A

1 Power Supply required
4U - Height

See Configuration

Note:4, 10

HP 5406-44G-PoE+-2XG v2 zl Swch w Pm SW

J9533A

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included (min=0 \ max=2 SFP+
Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height

See Configuration

Note:1 , 4, 8, 10,

12

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406-44G-PoE+-4G v2 zl Swch w Prm SW

J9539A

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 13

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod included (min=0 \ max=4 SFP Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height

See Configuration

Note: 2, 4, 8, 10,

12

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406 8p10GT 8p10GE Swch and Psw

J9866A

8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height

See Configuration

Note:1, 4, 8, 10,

12

PDU CABLE NA/MEX/TW/JP

J9866A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9866A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9866A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412 zl Switch with Premium Software

J9643A

2 Power Supplies required
7U - Height

See Configuration

Note:4

HP 5412-92G-PoE+-2XG v2 zl Swch w Pm SW

J9532A

92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+
Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height

See Configuration

Note:1, 4, 8, 10,

12

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 14

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW

J9540A

92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height

See Configuration

Note:2, 4, 8, 10,

12

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1

The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 SFP+ SFP+ 1m Direct Attach Cable

J9281B

HP X242 SFP+ SFP+ 3m Direct Attach Cable

J9283B

HP X242 SFP+ SFP+ 7m Direct Attach Cable

J9285B

HP X244 XFP SFP+ 1m Direct Attach Cable

J9300A

HP X244 XFP SFP+ 3m Direct Attach Cable

J9301A

HP X244 XFP SFP+ 5m Direct Attach Cable

J9302A

HP X242 SFP+ 10m DAC Cable

J9286B

HP X242 SFP+ 15m DAC Cable

J9287B

Note 2

The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 15

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X111 100M SFP LC FX Transceiver

J9054C

Note 4

Localization required on orders without #B2B, #B2C, #B2D or #B2E options.

Note 8

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in North America, Mexico Taiwan, and Japan)

Note 10

If the Switch Chassis is to be Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and
integrated to the J9809A - HP 5400 CTO Enablement. (Min 1/Max 1 Switch per SSP)

Note 12

If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO
chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.

Rack Level Integration CTO Models

CTO Switch Chassis

HP 5406 zl Switch with Premium Software

J9642A

1 Power Supply required
4U - Height

See Configuration

Note:11

HP 5406-44G-PoE+-2XG v2 zl Swch w Pm SW

J9533A

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included (min=0 \ max=2 SFP+
ransceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height

See Configuration

Note:1, 4, 11

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406-44G-PoE+-4G v2 zl Swch w Prm SW

J9539A

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 16

44 autosensing 10/100/1000 port
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port GT PoE+/4-port SFP v2 zl Mod included (min=0 \ max=4 SFP Transceivers)
1 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
4U - Height

See Configuration

Note:2, 4, 11

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5406 8p10GT 8p10GE Swch and Psw

J9866A

8 RJ-45 10GbE ports
1 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9546A HP 8-port 10GBASE-T v2 zl Module included
1 - J9538A HP 8-port 10GbE SFP+ v2 zl Module included (min=0 \ max=8 SFP+ Transceivers)
4U - Height

See Configuration

Note:1, 4, 11

PDU CABLE NA/MEX/TW/JP

J9866A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9866A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9866A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412 zl Switch with Premium Software

J9643A

2 Power Supplies required
7U - Height

See Configuration

Note:11

HP 5412-92G-PoE+-2XG v2 zl Swch w Pm SW

J9532A

92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9536A HP 20-port Gig-T PoE+ / 2-port 10-GbE SFP+ v2 zl Module included(min=0 \ max=2 SFP+
Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height

See Configuration

Note:1, 4, 11

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 17

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 5412-92G-PoE+-4G v2 zl Swch w Prm SW

J9540A

92 autosensing 10/100/1000 port
2 - J9306A HP 1500 W PoE+ zl Power Supply included
1 - J9535A HP 20-port Gig-T PoE+ / 4-port SFP v2 zl Module included (min=0 \ max=4 SFP Transceivers)
3 - J9534A HP 24-port Gig-T PoE+ v2 zl Module included
7U - Height

See Configuration

Note:2, 4, 5, 8

PDU CABLE NA/MEX/TW/JP

#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules:

Note 1

The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 SFP+ SFP+ 1m Direct Attach Cable

J9281B

HP X242 SFP+ SFP+ 3m Direct Attach Cable

J9283B

HP X242 SFP+ SFP+ 7m Direct Attach Cable

J9285B

HP X244 XFP SFP+ 1m Direct Attach Cable

J9300A

HP X244 XFP SFP+ 3m Direct Attach Cable

J9301A

HP X244 XFP SFP+ 5m Direct Attach Cable

J9302A

HP X242 SFP+ 10m DAC Cable

J9286B

HP X242 SFP+ 15m DAC Cable

J9287B

Note 2

The following Transceivers install into this Chassis : (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 18

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X111 100M SFP LC FX Transceiver

J9054C

Note 4

Localization required on orders without #B2B, #B2C, #B2D or #B2E options.

Note 6

If the CTO Base Model is ordered #0D1, Then #B2B, or #B2C is Required on the Power Supply's. (Optional when
Switch is not Factory Racked. See Drop down remark in "Power Supplies" section.)

Note 11

If the CTO Switch Chassis needs to be racked, Then the CTO Base Model needs to integrate (with #0D1) to the HP
Rack.

Internal Power Supplies

J9642Ax System (std 0 // max 2) User Selection (min 1 / max 2)

J9533Ax, J9866A and J9539Ax System (std 1 // max 2) User Selection (min 0 / max 1)

J9643Ax System (std 0 // max 4) User Selection (min 2 / max 4)

J9532Ax and J9540x System (std 2 // max 4) User Selection (min 0 / max 2)

HP 1500 W PoE+ zl Power Supply

J9306A

C15 Outlet

See Configuration

Note:1, 2, 6

PDU CABLE NA/MEX/TW/JP

J9306A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU CABLE ROW

J9306A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

J9306A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 875W zl Power Supply

J8712A

C15 Outlet

See Configuration

Note:1, 2, 5, 6

PDU CABLE NA/MEX/TW/JP

J8712A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 19

High Volt Switch to Wall Power Cord

J8712A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP 1500 W zl Power Supply

J8713A

C20 Outlet

See Configuration

Note:1, 2, 5, 6

C19 PDU WW

J8713A#B2D

C19 to C20 Jumper Cord

High Volt Switch to Wall Power Cord

J8713A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules

:

Note 1

Power Supplies cannot be mixed for a switch enclosure

Note 2

Localization required on orders without #B2B, #B2C or #B2E options.

Note 5

This power supply is not supported on the J9533Ax, J9539Ax, J9532Ax, J9866A and J9540x switches.

Note 6

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in NA, Mexico,, Taiwan, and Japan)

Remarks:

"Drop down under power supply should offer the following options and results:

Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)

Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)

High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)"

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Modules

J9642x only - System (std 0 // max=6) User Selection (min 0 / max=6) per Chassis

J9643x only - System (std 0 // max=12) User Selection (min 0 / max=12) per Chassis

J9533x, J9539x, J8699x, J9447x, J9866A only - System (std 2 // max=6) User Selection (min 0 / max=4) per Chassis

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 20

J8700x, J9532x, J9448x, J9450x only - System (std 4 // max=12) User Selection (min 0 / max=8) per Chassis

HP 20-port GT PoE+/4-port SFP v2 zl Mod

J9535A

min=0 \ max=4 SFP Transceivers

See Configuration

Note:1

HP 24-port SFP v2 zl Module

J9537A

min=0 \ max=24 SFP Transceivers

See Configuration

Note:1

HP 12p Gig-T PoE+/12p SFP v2 zl Mod

J9637A

min=0 \ max=12 SFP Transceivers

See Configuration

Note:1

HP 20-port Gig-T / 4-port SFP v2 zl Mod

J9549A

min=0 \ max=20 SFP Transceivers

See Configuration

Note:1

HP 4-port 10GbE SFP+ zl Module

J9309A

min=0 \ max=4 SFP+ Transceivers

See Configuration

Note:2

HP 8-port 10 GbE SFP+ v2 zl Module

J9538A

min=0 \ max=8 SFP+ Transceivers

See Configuration

Note:5

HP 20p GT PoE+ / 2p SFP+ v2 zl Module

J9536A

min=0 \ max=2 SFP+ Transceivers

See Configuration

Note:5

HP 20-port Gig-T / 2-port SFP+ v2 zl Mod

J9548A

min=0 \ max=2 SFP+ Transceivers

See Configuration

Note:5

HP 4-Port 10 GbE X2 zl Module

J8707A

min=0 \ max=2 X2 Transceivers

See Configuration

Note:3

HP 4-Port 10 GbE CX4 zl Module

J8708A

min=0 \ max=2 CX4 Media Converter

HP 8-port 10GBase-T v2 zl Module

J9546A

No Transceivers

HP 24-Port 10/100/1000 PoE zl Module

J8702A

No Transceivers

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 21

HP 20p 10/100/1000 PoE+/4p MGBIC zl Mod

J9308A

No Transceivers

See Configuration

Note:1

HP 20-Port Gig-T/4-Port Mini-GBIC zl Module

J8705A

No Transceivers

See Configuration

Note:12

HP 24-Port Mini-GBIC zl Module

J8706A

No Transceivers

See Configuration

Note:12

HP 24-Port 10/100/1000 PoE+ zl Module

J9307A

No Transceivers

HP 24-port Gig-T PoE+ v2 zl Module

J9534A

No Transceivers

HP 24-Port 10/100 PoE+ zl Module

J9478A

No Transceivers

HP 24-port 10/100 PoE+ v2 zl Module

J9547A

No Transceivers

HP 24-port Gig-T v2 zl Module

J9550A

No Transceivers

HP MSM765 zl Mobility Controller

J9370A

No Transceivers

HP MSM775 zl Premium Controller Module

J9840A

No Transceivers

See Configuration

Note:10

HP Surv Brch Com zl Mod pwrby Msft Lync

J9485A

No Transceivers. Double Height Module, takes up 2 Vertical slots*

See Configuration

Note:4, 6, 7, 8, 9

HP Svc zlMod f/AvayaSBC pwrby AcmePacket

J9486A

No Transceivers. Double Height Module, takes up 2 Vertical slots*

See Configuration

Note:6, 7, 8, 9

HP Advanced Services v2 zl Module w/ HDD

J9857A

No Transceivers

See Configuration

Note:11

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 22

HP Advanced Services v2 zl Module w/ SSD

J9858A

No Transceivers

See Configuration

Note:11

HP Adv Srvs zl Mod w/XenServer Platform

J9747A

No Transceivers

See Configuration

Note:6, 7, 8

HP Adv Srvs zl Mod w/vSphere Platform

J9748A

No Transceivers

See Configuration

Note:6, 7, 8

Configuration Rules:

Note 1

The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable
HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X121 1G SFP RJ45 T Transceiver

J8177C

Note 2

The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable
HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 SFP+ SFP+ 1m Direct Attach Cable

J9281B

HP X242 SFP+ SFP+ 3m Direct Attach Cable

J9283B

HP X242 SFP+ SFP+ 7m Direct Attach Cable

J9285B

HP X244 XFP SFP+ 1m Direct Attach Cable

J9300A

HP X244 XFP SFP+ 3m Direct Attach Cable

J9301A

HP X244 XFP SFP+ 5m Direct Attach Cable

J9302A

HP X242 SFP+ 10m DAC Cable

J9286B

HP X242 SFP+ 15m DAC Cable

J9287B

Note 3

The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable
HP X131 10G X2 SC SR Transceiver

J8436A

HP X131 10G X2 SC LR Transceiver

J8437A

HP X131 10G X2 SC ER Transceiver

J8438A

HP X131 10G X2 SC LRM Transceiver

J9144A

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 23

Note 4

The following Upgrades install into this Module:
Sangoma 2-port T1/E1/J1 Telephony Card

J9488A

Sangoma 4-port T1/E1/J1 Telephony Card

J9489A

Sangoma 4-port FXO Telephony Card

J9516A

Sangoma 4-port FXS Telephony Card

J9482A

Sangoma 2-port FXO / 2-port FXS Telephony Card

J9518A

Sangoma 1-port T1/E1/J1 Telephony Card

J9487A

Note 5

The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable
HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 SFP+ SFP+ 1m Direct Attach Cable

J9281B

HP X242 SFP+ SFP+ 3m Direct Attach Cable

J9283B

HP X242 SFP+ SFP+ 7m Direct Attach Cable

J9285B

HP X244 XFP SFP+ 1m Direct Attach Cable

J9300A

HP X244 XFP SFP+ 3m Direct Attach Cable

J9301A

HP X244 XFP SFP+ 5m Direct Attach Cable

J9302A

Note 6

For Switches: J9643A, J9532A, J9540A; If this module is selected, Then Max = 4 Modules of any combination or
pairing of the following modules: J9517A, J9485A, J9486A, J9289A, J9483A, J9666A, J9747A, J9748A. Double Height
Modules occupy 2 vertical slots.

Note 7

If this module is selected, Then show following message:
For better airflow, This module must be located on left side only in the following Switches: J9642A, J9533A, J9539A,
J9866A.
For better airflow, It is preferred, but not required, that This module be located on left side only in the following
Switches: J9643A, J9532A, J9540A.

Note 8

For Switches J9642A, J9533A, J9539A, J9866A; If this module is selected, Then Max = 3 SLOTS on left side of chassis
only, of any combination or pairing of the following modules: J9517A, J9485A, J9486A, J9289A, J9483A, J9666A,
J9747A, J9748A. Double Height Modules occupy 2 vertical slots.

Note 9

This module occupies 2 Vertical Slots.

Note 10

Maximum of this Module per Chassis:
J9642A min=0\max=5 per Chassis
J9533A, J9539A, J9866A min=0\max=4 per Chassis
J9643A, J9532A, J9540A min=0\max=6 per Chassis
There are no restrictions on which slots these modules may go in.

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 24

Note 11

Maximum of this Module per Chassis:
J9642A, J9533A, J9539A, J9866A min=0\max=4 per Chassis
J9643A, J9532A, J9540A min=0\max=6 per Chassis
There are no restrictions on which slots these modules may go in.

Transceivers

SFP Transceivers

HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP X121 1G SFP RJ45 T Transceiver

J8177C

SFP+ Transceivers

HP X132 10G SFP+ LC ER Transceiver

J9153A

HP X132 10G SFP+ LC LR Transceiver

J9151A

HP X132 10G SFP+ LC LRM Transceiver

J9152A

HP X132 10G SFP+ LC SR Transceiver

J9150A

HP X242 10G SFP+ SFP+ 1m DAC Cable

J9281B

HP X242 10G SFP+ SFP+ 3m DAC Cable

J9283B

HP X242 10G SFP+ SFP+ 7m DAC Cable

J9285B

HP X242 10G SFP+ 10m DAC Cable

J9286B

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 25

HP X242 10G SFP+ 15m DAC Cable

J9287B

HP X244 10G XFP SFP+ 1m DAC Cable

J9300A

HP X244 10G XFP SFP+ 3m DAC Cable

J9301A

HP X244 10G XFP SFP+ 5m DAC Cable

J9302A

X2 Transceivers

HP X131 10G X2 SC ER Transceiver

J8438A

HP X131 10G X2 SC LR Transceiver

J8437A

HP X131 10G X2 SC LRM Transceiver

J9144A

HP X131 10G X2 SC SR Transceiver

J8436A

Cables

Multi-Mode Cables

HP .5m Multi-mode OM3 LC/LC FC Cable

AJ833A

HP 1m Multi-mode OM3 LC/LC FC Cable

AJ834A

HP 2 m Multimode OM3 LC/LC FC Cable

AJ835A

HP 5 m Multimode OM3 LC/LC FC Cable

AJ836A

HP 15 m Multimode OM3 LC/LC FC Cable

AJ837A

HP 30 m Multimode OM3 LC/LC FC Cable

AJ838A

HP 50 m Multimode OM3 LC/LC FC Cable

AJ839A

HP Premier Flex LC/LC OM4 2f 1m Cbl

QK732A

HP Premier Flex LC/LC OM4 2f 2m Cbl

QK733A

HP Premier Flex LC/LC OM4 2f 5m Cbl

QK734A

HP Premier Flex LC/LC OM4 2f 15m Cbl

QK735A

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 26

HP Premier Flex LC/LC OM4 2f 30m Cbl

QK736A

HP Premier Flex LC/LC OM4 2f 50m Cbl

QK737A

Switch Enclosure Options

External Redundant Power Supplies

HP zl Power Supply Shelf

J8714A

Height = 3U

Cofiguration Rules:

Note 1

This shelf allows the addition of 2 extra J9306A - HP 1500 W PoE+ zl Power Supply in order to increase the number
of POE+ ports.

Remarks:

Cables included: includes two 2 m PoE (EPS) cables; cables can be used to carry PoE power to the connected switch;
no extra cables are needed for a complete solution. Flexible mounting: the power shelf can be mounted forward or
rear facing in a rack; in a four-post rack, two power shelves can be mounted front to front, requiring only 3U of rack
space.

License

HP MSM760/765 Additional 40 AP License

J9371A

Remarks:

The License is an option to the J9370A.

Survivable Branch Communication Upgrades

Sangoma 2-port T1/E1/J1 Telephony Card

J9488A

Sangoma 4-port T1/E1/J1 Telephony Card

J9489A

Sangoma 4-port FXO Telephony Card

J9516A

Sangoma 4-port FXS Telephony Card

J9482A

Sangoma 2-port FXO / 2-port FXS Telephony Card

J9518A

Sangoma 1-port T1/E1/J1 Telephony Card

J9487A

Remarks:

The Sangoma Telephony Cards are accessories to the J9485A.

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 27

US Federal Government certifications

HP zl Chassis FIPS 10K Rack Mounting Kit

J9708A

See Configuration

Note:1

HP 16mm x 32mm Tmpr-Evidence (20) Labels

J9740A

See Configuration

Note:1

HP 16mm x 32mm Tmpr-Evidence (120) Label

J9709A

See Configuration

Note:1

HP 5406 zl FIPS Opacity Shield Kit

J9710A

See Configuration

Note:1

HP 5412 zl FIPS Opacity Shield Kit

J9711A

See Configuration

Note:1

HP 5406 zl High Performance Fan Tray

J9721A

See Configuration

Note:1

HP 5412 zl High Performance Fan Tray

J9722A

See Configuration

Note:1

Cofiguration Rules:

Note 1

Do not display in Watson.

QuickSpecs

HP 5400 zl Switch Series

Configuration

DA - 12436 North America — Version 34 — December 9, 2014

Page 28

HP 5406 zl Switch with
Premium Software

(J9642A)

I/O ports and slots

6 open module slots
Supports a maximum of 48 10-GbE ports or 144 autosensing 10/100/1000

ports or 144 mini-GBICs, or a combination

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

Physical characteristics

Dimensions

17.5(w) x 17.75(d) x 6.9(h) in (44.45 x 45.09 x

17.53 cm) (4U height)

Weight

23.55 lb (10.68 kg)

Memory and processor

Gigabit Module

ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR
SDRAM

10G module

ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR
SDRAM

Management Module

Freescale PowerPC 8540 @ 666 MHz, 4 MB flash,
128 MB compact flash, 256 MB DDR SDRAM

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only

Performance

1000 Mb Latency

< 3.7 µs (FIFO 64-byte packets)

10 Gbps Latency

< 2.1 µs (FIFO 64-byte packets)

Throughput

up to 282.1 million pps

Routing/Switching
capacity

379.2 Gbps

Switch fabric speed

379.2 Gbps

Routing table size

10000 entries (IPv4), 5000 entries (IPv6)

MAC address table size

64000 entries

Environment

Operating temperature

32°F to 131°F (0°C to 55°C); 0°C to 40°C with
J8706A or J8707A modules installed

Operating relative
humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

15% to 95% @ 149°F (65°C), noncondensing

Altitude

up to 10,000 ft (3 km)

Acoustic

Power: 57 dB, Pressure: 40.2 dB ISO 7779, ISO
9296

Electrical characteristics

Frequency

50/60 Hz

Achieved Miercom Certified Green Award

Description

Chassis ships without power supplies. Two power
supply slots are available; three different power
supplies are available. See power supply products
for additional specifications.

Maximum heat
dissipation

2450 BTU/hr (2584 kJ/hr), (max. non-PoE); 3700
BTU/hr (3903 kJ/hr) (max. using PoE)

QuickSpecs

HP 5400 zl Switch Series

Technical Specifications

DA - 12436 North America — Version 34 — December 9, 2014

Page 29

Voltage

100-127/200-240 VAC

Safety

CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950

Emissions

FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A

Immunity

EN

EN 55024, CISPR 24

ESD

IEC 61000-4-2; 4 kV CD, 8 kV AD

Radiated

IEC 61000-4-3; 3 V/m

EFT/Burst

IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal
line)

Surge

IEC 61000-4-5; 1 kV/2 kV AC

Conducted

IEC 61000-4-6; 3 V

Power frequency
magnetic field

IEC 61000-4-8; 1 A/m, 50 or 60 Hz

Voltage dips and
interruptions

IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

HP PCM+; HP PCM (included); command-line interface; Web browser;
configuration menu; out-of-band management (serial RS-232C)

Notes

Supported 1G SFP transceivers are revision "B" or later (product number ends
with the letter "B" or later; for example, J9142B, J8177C).

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (UY909E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UY910E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (UY911E)
3-year, 24x7 SW phone support, software updates (UY912E)
Installation with minimum configuration, system-based pricing (U4828E)
Installation with HP-provided configuration, system-based pricing (U4832E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UW452E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UW453E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UW454E)
4-year, 24x7 SW phone support, software updates (UW455E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UW473E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UW474E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UW475E)
5-year, 24x7 SW phone support, software updates (UY938E)
3 Yr 6 hr Call-to-Repair Onsite (UY913E)
4 Yr 6 hr Call-to-Repair Onsite (UW456E)
5 Yr 6 hr Call-to-Repair Onsite (UY939E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR599E)
1-year, 4-hour onsite, 24x7 coverage for hardware (HR600E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR603E)
1-year, 24x7 software phone support, software updates (HR602E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
support and software updates (HR601E)

QuickSpecs

HP 5400 zl Switch Series

Technical Specifications

DA - 12436 North America — Version 34 — December 9, 2014

Page 30