QuickSpecs
Overview
Overview
HPE Ethernet 10Gb 2-port 530T Adapter
HPE Ethernet 10Gb 2-port 530T Adapter
Recommended SKU - This adapter is a recommended option that has been selected by HPE experts to provide the right technology for
a range of workloads and market segments offering the best combination of performance, value and availability.
The HPE Ethernet 10Gb 2-port 530T Adapter is a dual-port 10GBASE-T adapter, featuring the 57810S 10 Gb Ethernet solution from
QLogic in a PCIe 2.0 compliant form factor designed for HPE ProLiant servers. The HPE 530T Adapter delivers full line-rate performance
across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters.
Providing high performance Ethernet connectivity, it is ideal for virtual server and cloud computing environments. It supports enterprise
class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Tunneling Offloads (NVGRE, VxLAN),
Receive Side Scaling (RSS), jumbo frames, PXE boot and virtualization features including SR-IOV, Network Partitioning (NPAR), VMware
NetQueue and Microsoft VMQ.
The adapter's support for HPE Sea of Sensors 3D Technology enhances server performance by reducing energy consumption and
expense.
HPE Ethernet 10Gb 2-port 530T Adapter
Page 1
QuickSpecs HPE Ethernet 10Gb 2-port 530T Adapter
Platform Information
Platform Information
Models
HPE Ethernet 10Gb 2-port 530T Adapter 656596-B21
Kit Contents
Compatibility Supported Servers
HPE Ethernet 10Gb 2-port 530T Adapter
Quick install card
Product warranty statement
HPE ProLiant DL20 Gen9 Server
HPE ProLiant DL60 Gen9 Server
HPE ProLiant DL120 Gen9 Server
HPE ProLiant DL160 Gen9 Server
HPE ProLiant DL180 Gen9 Server
HPE ProLiant DL360 Gen9 Server
HPE ProLiant DL360 Gen10 Server
HPE ProLiant DL380 Gen9 Server
HPE ProLiant DL380 Gen10 Server
HPE ProLiant DL560 Gen9 Server
HPE ProLiant DL580 Gen9 Server
HPE ProLiant ML30 Gen9 Server
HPE ProLiant ML350 Gen9 Server
HPE Apollo 2000 - XL1x0r Gen9 Server
HPE Apollo 4200 Gen9 Server
HPE Apollo 4500 XL450 Gen9 Server
HPE Apollo 6500 XL270d Gen9 Server HPE ProLiant
NOTE:
This is a list of supported servers. Some may be discontinued.
Page 2
QuickSpecs HPE Ethernet 10Gb 2-port 530T Adapter
Standard Features
Standard Features
At a Glance Features
• Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)
• Industry-leading throughput and latency performance
• Up to 40 Gb/s bi-directional near-line rate throughput
• 10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
• Improved small packet performance
• Low profile design shipping with standard height and low-profile brackets
• On chip temperature monitor
• Operates at 1 Gbps/10 Gbps, auto-negotiation, on both ports
• Support for Preboot eXecution Environment (PXE)
• Optimized for virtual server environments with support for Network Partitioning (NPAR) and Single-Root
I/O Virtualization (SR-IOV).
• Active Health Systems support
• Field replaceable and upgradeable.
• PXE, Jumbo Frames, Checksum and Segmentation Offload, IPv6 and RSS
• IEEE 1588 (Time Synchronization) ready
ThroughputTheoretical Bandwidth
802.1Q VLANs
Checksum &
Segmentation Offload
Configuration Utilities
DPDK
HPE Sea Of Sensors
3D
This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing
the network performance needed to improve response times and alleviate bottlenecks.
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be
separated into multiple virtual NICs for added network segmentation and enhanced security and performance.
VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same
VLAN domain also improves performance.
Normally the TCP Checksum is computed by the protocol stack. Segmentation Offload is technique for
increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead. The
technique is also called TCP segmentation offload (TSO) when applied to TCP, or generic segmentation offload
(GSO).
This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable
initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows
operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment
allow for unattended OS installations.
This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments.
Support for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity heat - across the server. When temperatures get too high, sensors can initiate fans and make other adjustments
to reduce energy usage. A significant improvement lies in the ability to apply fan speed increases only to the
Page 3