HP 530SFP+ User Manual

QuickSpecs

Overview

Overview

HPE Ethernet 10Gb 2-port 530SFP+ Adapter

HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Recommended SKU - This adapter is a recommended option that has been selected by HPE experts to provide the right technology for
a range of workloads and market segments offering the best combination of performance, value and availability.
The HPE 530SFP+ is a dual-port 10Gb Ethernet adapter featuring the next generation 57810S single-chip solution from QLogic in a
PCIe 2.0 compliant form factor designed for select HPE ProLiant servers.
Leveraging QLogic's market-proven architecture and software, the HPE 530SFP+ delivers full line-rate performance across all ports with
low power consumption.
The HPE 530SFP+ supports enterprise class features such as VXLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming
(bonding), Tunneling offloads (NVGRE, VxLAN), Receive Side Scaling (RSS), jumbo frames, PXE boot and virtualization features such as
SR-IOV, Network Partitioning, VMware NetQueue and Microsoft VMQ.
Support for HPE Sea of Sensors 3D Technology enhances server performance while reducing energy use and expense.

Page 1

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Overview

HPE Ethernet 10Gb 2-port 530SFP+ Adapter, with full-height bracket

Page 2

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Overview

HPE Ethernet 10Gb 2-port 530SFP+ Adapter, with half-height bracket

Page 3

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Platform Information

Platform Information

Models

HPE Ethernet 10Gb 2-port 530SFP Adapter 652503-B21

Kit Contents

Compatibility ­Supported Servers

HPE Ethernet 10Gb 2-port 530SFP+ Adapter
Quick install card
Product warranty statement

HPE ProLiant DL20 Gen9 Server
HPE ProLiant DL60 Gen9 Server
HPE ProLiant DL80 Gen9 Server
HPE ProLiant DL120 Gen9 Server
HPE ProLiant DL160 Gen9 Server
HPE ProLiant DL180 Gen9 Server
HPE ProLiant DL360 Gen9 Server
HPE ProLiant DL360 Gen10 Server
HPE ProLiant DL380 Gen9 Server
HPE ProLiant DL380 Gen10 Server
HPE ProLiant DL560 Gen9 Server
HPE ProLiant DL580 Gen9 Server
HPE ProLiant ML30 Gen9 Server
HPE ProLiant ML350 Gen9 Server
HPE Apollo 2000-XL170r Gen9 Server
HPE Apollo 2000-XL190r Gen9 Server
HPE Apollo 4200 Gen9 Server
HPE Apollo 4500 XL450 Gen9 Server
HPE Apollo 6500 XL270d Gen9 Server

NOTE:

This is a list of supported servers. Some may be discontinued.

Page 4

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Standard Features

Standard Features

At a Glance Features

• Industry-leading throughput and latency performance

• Operates at 1 Gbps/10 Gbps, auto-negotiation, on both ports

• Up to 40 Gb/s bi-directional near line rate throughput

• Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)

• Improved small packet performance: Supports UEFI and legacy boot options and Tunnel offload support
(NVGRE, VXLAN)

• Low profile design shipping with standard height and low-profile brackets

• Optimized for virtual server environments with support for Network Partitioning (NPAR) and Single-Root
I/O Virtualization (SR-IOV)Active Health Systems support via FW (OCBB), I2C capable

• PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS

• On chip temperature monitor (OCSD)

• Standard server operating system support

• Field replaceable and upgradeable

• Support for Preboot eXecution Environment (PXE)

• Integrated PHY and MAC

• IEEE 1588 (Time Synchronization)

Throughput­Theoretical Bandwidth

802.1Q VLANs

Checksum & Segmentation Offload

Configuration Utilities

Converged Network Utility (CNU)

This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing
the network performance needed to improve response times and alleviate bottlenecks.

IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be
separated into multiple virtual NICs for added network segmentation and enhanced security and performance.
VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same
VLAN domain also improves performance.

Normally the TCP Checksum is computed by the protocol stack. Segmentation Offload is technique for
increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead. The
technique is also called TCP segmentation offload (TSO) when applied to TCP, or generic segmentation offload
(GSO).

This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable
initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows
operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment
allow for unattended OS installations.

This adapter supports Converged Network Utility (CNU) a manageability application to configure converged
network adapters (CNAs) and Ethernet adapters on HPE servers. This host based utility supports for both
GUI and Command Line Interface (scriptable), and can be used to configure Ethernet, FCoE, iSCSI and NPAR
related features/functionality on multiple OS platforms including Windows and Linux. CNU is able to configure

Page 5

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Standard Features

multiple HPE adapters from various network controllers at the same time. Users can benefit easier setup steps,
shorter re-boot time, and one-stop solution for multiple adapters via CNU.

DPDK

HPE Sea Of Sensors 3D

IPv6

Jumbo Frames

LED Indicators

Management Support

This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments.

Support for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity ­heat - across the server. When temperatures get too high, sensors can initiate fans and make other adjustments
to reduce energy usage. A significant improvement lies in the ability to apply fan speed increases only to the
portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount
of energy used for cooling.

IPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bit
addressing.

This adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,000 byte (KB)
transmission unit (MTU) when running Ethernet I/O traffic. This is over five times the size of a standard 1500­byte Ethernet frame. With Jumbo Frames, networks can achieve higher throughput performance and greater
CPU utilization. These attributes are particularly useful for database transfer and tape backup operations.

LED indicators show link integrity and network activity for easy troubleshooting.

This adapter ships with agents that can be managed from HPE Systems Insight Manager or other management
application that support SNMP.

Message Signaled Interrupt (Extended) (MSI-X)

Network Adapter Teaming

Network Partitioning (NPAR)

Optimized for Virtualization

Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load balancing
interrupts between CPUs/cores.

This adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased
network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for
several different types of teaming enabling IT administrators to optimize availability, improve performance
and help reduce costs.

This adapter supports Network Partitioning (NPAR) allowing administrators to configure a 10 Gb port as four
separate partitions or physical functions. Each PCI function is associated with a different virtual NIC. To the OS
and the network, each physical function appears as a separate NIC port.

I/O Virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands
of consolidated virtual workloads.

Page 6

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Standard Features

Preboot eXecution Environment (PXE)

Receive Side Scaling (RSS)

Server Integration

Single-Root I/O Virtualization

TCP/UDP/IP

Support for PXE enables automatic deployment of computing resources remotely from anywhere. It allows a
new or existing server to boot over the network and download software, including the operating system, from a
management/ deployment server at another location on the network.Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.

RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter
to be shared across multiple processors. RSS enables packet receive-processing to scale with the number of
available processors.

This adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant servers. Hewlett
Packard Enterprise validates a wide variety of major operating systems drivers with the full suite of web-based
enterprise management utilities including HPE Intelligent Provisioning and HPE Systems Insight Manager that
simplify network management.
This approach provides a more robust and reliable networking solution than offerings from other vendors and
provides users with a single point of contact for both their servers and their network adapters.

Single-Root I/O Virtualization (SR-IOV) provides a mechanism to bypass the host system hypervisor in virtual
environments providing near metal performance and server efficiency. SR-IOV provides mechanism to create
multiple Virtual Functions (VFs) to share single PCIe resources. The device is capable of SR-IOV, and requires
Server BIOS support, controller firmware, and OS support.

For overall improved system response, this adapter supports standard TCP/IP offloading techniques including:
TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network
adapter. Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be
handled by the adapter rather than the CPU.

Precision Time Protocol (IEEE 1588 PTP)

TOE

Tunnel Offload

Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond
range, making it suitable for measurement and control systems.

TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to
the adapter's processor, freeing server CPU cycles for other operations.

Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN
and NVGRE. By offloading packet processing to adapters, customers can use overlay networking to increase
VM migration flexibility and virtualized overlay networks with minimal impact to performance. HPE Tunnel
Offloading increases I/O throughput, reduces CPU utilization, and lowers power consumption. Tunnel Offload
supports VMware's VXLAN and Microsoft's NVGRE solutions.

Page 7

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Standard Features

VMware NewQueue and Microsoft Virtual Machine Queue (VMQ)

Warranty

VMware NetQueue is technology that significantly improves performance of 10 Gigabit Ethernet network
adapters in virtualized environments.
Windows Hyper-V VMQ (VMQ) is a feature available on servers running Windows Server 2008 R2 with VMQ­enabled Ethernet adapters. VMQ uses hardware packet filtering to deliver packet data from an external virtual
machine network directly to virtual machines, which reduces the overhead of routing packets and copying
them from the management operating system to the virtual machine.

Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year, limited
warranty).
Minimum: One year limited warranty.

NOTE:

Additional information regarding worldwide limited warranty and technical
support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/

index.aspx#.V4e3tPkrJhE

Page 8

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Service and Support

Service and Support

Service and Support NOTE:

Most HPE branded options sourced from HPE that are compatible with your product will be covered under
your main product support at the same level of coverage, allowing you to upgrade freely. Additional support is
required on select workload accelerators, switches, racks and UPS options 12KVA and over. Coverage of the
UPS battery is not included under HPE support services; standard warranty terms and conditions apply.

This adapter is covered under HPE Support Services/ Service Contract applied to the HPE
ProLiant Server or enclosure. No separate HPE Support Services need to be purchased.

Warranty and Support Services

Protect your business beyond warranty with HPE Support Services

Parts and Materials

Warranty and Support Services will extend to include HPE options configured with your server or storage
device. The price of support service is not impacted by configuration details. HPE sourced options that are
compatible with your product will be covered under your server support at the same level of coverage allowing
you to upgrade freely. Installation for HPE options is available as needed. To keep support costs low for
everyone, some high value options will require additional support. Additional support is only required on select
high value workload accelerators, fibre switches, InfiniBand and UPS options 12KVA and over. Coverage of the
UPS battery is not included under TS support services; standard warranty terms and conditions apply.

HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to HPE to help prevent problems and solve issues faster. HPE Support Services enable you to choose
the right service level, length of coverage and response time as you purchase your new server, giving you full
entitlement to the support you need for your IT and business.
Protect your product, beyond warranty.

Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements. Parts and components that have reached their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual,
product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of
these services. The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by Hewlett Packard Enterprise due to malfunction.

For more information

Visit the Hewlett Packard Enterprise Service and Support website.

Page 9

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Related Options

Related Options

Cables - Direct Attach

HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable 487649-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable 487652-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable 487655-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable 537963-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable 487658-B21
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283B
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable J9285B
HP X240 10G SFP+ SFP+ 3m DAC Cable JD097C
HP X240 10G SFP+ SFP+ 5m DAC Cable JG081C
HP X240 10G SFP+ SFP+ 0.65m DAC Cable JD095C
HP X240 10G SFP+ SFP+ 1.2m DAC Cable JD096C
HP X240 10G SFP+ SFP+ 7m DAC Cable JC784C

NOTE:

Direct Attach Cable (DAC) must be purchased separately for copper environments.

Cables - Fiber Optic

Transceivers

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable AJ838A
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A

NOTE:

Fiber transceivers and cables must be purchased separately for fiber-optic environments.

HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver 455883-B21
HPE BladeSystem c-Class 10Gb SFP+ LR Transceiver 455886-B21

NOTE:

Fiber transceivers and cables must be purchased separately for fiber-optic environments.

Page 10

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Technical Specifications

Technical Specifications

General Specifications

Network Processor Cavium 57810S chipset
Data Rate Two ports, each at 20 Gb/s bi-directional; 40 Gb/s aggregate bi-directional

theoretical bandwidth.

Onboard Memory PCI Express 2.0 (Gen 2) x8
Form Factor Standard and low profile adapter compliant with the PCIe standard
IEEE Compliance 802.3, 802.3ae, 802.3x, 802.2x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb,

802.1Qbg, 802.1ax

Power and Environmental Specifications

Operating System and Virtualization Support

Environment­friendly Products and
Approach - End-of­life Management and
Recycling

Power 9W maximum
Temperature - Operating 0° to 55°C (32° to 131°F)
Humidity - Operating 5% to 95% non-condensing
Agency Approvals USA: FCC Part 15 Class A

Canada: ICES-003, Issue 4
Japan: VCCI V3 (2010.04) Class A
International: EN55022:2006 + A1:2007 Class A
EN55022:2006 + A1:2007 Class A, EN55024:1998+A1:2011+A2;
EN61000-3-2:2006, EN61000-3-3:2008
Taiwan: BSMI, CNS13438 (2006) Class A
Australia/New Zealand (AS/NZS): EN55022:2006+A12007 class A
Korea: KN22 Class A, KN24

RoHS Compliance 6 of 6

The Operating Systems supported by this adapter are based on the server OS support. Please refer to the OS
Support Matrix at https://www.hpe.com/us/en/servers/server-operating-systems.html.

Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many
geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled, recovered
or disposed of in a responsible manner.
The EU WEEE Directive (2012/19/EU) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly instructions) is posted on
the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE
treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett
Packard Enterprise equipment.

Page 11

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Summary of Changes

Summary of Changes

Date Version History Action Description of Change

05-Mar-2018 Version 29 Changed General Specifications section was updated
05-Feb-2018 Version 28 Changed Overview section was updated
18-Dec-2017 Version 27 Changed Standard Features-At a Glance Features was updated
06-Nov-2017 Version 26

16-Oct-2017 Version 25 Changed Overview and Technical Specifications-OS were updated.
11-Jul-2017 Version 24 Changed Compatibility section was updated.
10-Feb-2017 Version 23 Changed Overview, Compatibility, Standard Features and Technical Specifications

07-Oct-2016 Version 22 Changed Add DPDK support
23-Sep-2016 Version 21 Changed QuickSpecs sections were updated.

28-Nov-2014 Version 18 Changed Overview, Compatibility, Standard Features and Technical Specifications

10-Sep-2013 Version 17 Changed Compatibility, 10 Gigabit Server Adapters, and FlexibleLOM Adapters were

15-Mar-2013 Version 16 Added Technical Specifications: Added 802.3ae to the General Specifications

01-Mar-2013 Version 15 Changed Updated the Related Options section.
19-Feb-2013 Version 14 Changed Updated Overview, Standard Features, Related Options and Technical

04-Jan-2013 Version 13 Changed A description and SKU change was made in the Related Options section.
04-Dec-2012 Version 12 Changed Changes made in the Compatibility, Related Options and Technical

15-Nov-2012 Version 11 Changed Change made in the Technical Specifications section only.
24-Oct-2012 Version 10 Changed Changes made in the Related Options section.
10-Oct-2012 Version 9 Changed Changes made in the Compatibility section.
09-Oct-2012 Version 8 Changed Changes made in Compatibility section.
03-Oct-2012 Version 7 Changed Changes were made in Related Options section.
28-Sep-2012 Version 6 Changed Changes were made in Related Options section.
24-Sep-2012 Version 5 Changed Changes were made in Compatibility section.
20-Aug-2012 Version 4 Changed Changes were made in Compatibility section.

Changed Technical Specifications-OS and Virtualization Support section was

updated.

Added SKUs added in Related Options section:

487658-B21, J9281B, J9283B, J9285B, JD097C, JG081C, JD095C,
JD096C, JC784C

sections were updated.

Changed QuickSpecs sections were updated.22-Jul-2016 Version 20
Removed Obsolete SKUs were deleted:

503746-B21.
Changed Compatibility, Standard Features, Related Options sections were updated.19-Jun-2015 Version 19
Removed Obsolete SKUs removed:

221691-B21, 221691-B22, 221691-B23, 221692-B21, 221692-B22,

221692-B23, 221692-B26, 221692-B27, 412648-B21, 435508-B21,

394791-B21, 394793-B21, 538696-B21, 458492-B21, 468332-B21,

489892-B21, 581201-B21.

were updated

revised.

section.

Specifications.

Specifications sections.

Page 12

QuickSpecs HPE Ethernet 10Gb 2-port 530SFP+ Adapter

Date Version History Action Description of Change

13-Jul-2012 Version 3 Changed Changes were made in Related Options.
25-Jun-2012 Version 2 Changed Changes were made in Technical Specifications.
04-Jun-2012 Version 1 New QuickSpecs was created.

Sign up for updates

©

Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change
without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.

c04111517 - 14330 - Worldwide - V29 -05-March-2018