These release notes provide supplemental and updated information for the Smart
Array 5300A RAID controller product not available elsewhere. Smart Array
5300A (SA5300A) controllers are modular in design and are shipped in one of two
product configurations for use in supported Alpha systems. The
3X–KZPDC–BE (SA5302A/128) is a two channel U3 SCSI controller with
128MB of installed cache. The 3X–KZPDC–DF controller (SA5304A/256)
provides four channels of SCSI device interconnect and includes 256MB of cache.
Note: Be sure to review the product documentation and to check the Smart Array
5300A product web site for updates before installing these controllers into your
Alpha system.
The Smart Array 5300A controller product home page is located at:
Hewlett-Packard Company makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and fitness for a
particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or
use of this material.
This document contains proprietary information, which is protected by copyright. No part
of this document may be photocopied, reproduced, or translated into another language
without the prior written consent of Hewlett-Packard. The information contained in this
document is subject to change without notice.
HP, the HP logo, HP Insight Manager, AlphaServer, StorageWorks, and TruCluster
Registered in U.S. Patent and Trademark Office. OpenVMS and Tru64 are trademarks of
HP Information Technologies Group, L.P. in the United States and other countries.
Compaq Computer Corporation is a wholly-owned subsidiary of Hewlett-Packard
Company.
UNIX is a trademark of The Open Group in the United States and other countries. All
other product names mentioned herein may be trademarks of their respective companies.
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft
Corporation in the U.S. and/or other countries.
HP shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is provided "as is" without warranty of any kind and is
subject to change without notice.
Controller Firmware Support 1
Alpha System Firmware Support 2
Operating System Support 2
Tru64 UNIX Software Components 3
OpenVMS Software Components 4
Runtime Utility Support 5
Tru64 UNIX Utility Components 5
OpenVMS Utility Components 6
Web Browser Support 8
KZPDC Event Translation Support 8
Supported HP Alpha Systems 9
KZPDC Product Issues and Restrictions 10
Platform Specific Issues and Restrictions 10
DS20E System Issues 10
GS80, GS160 and GS320 System Issues 10
ES47, ES80 and GS1280 System Issues 11
Alpha System Firmware Issues and Restrictions 11
Tru64 UNIX Issues and Restrictions 12
OpenVMS Issues and Restrictions 12
Runtime Utility Issues and Restrictions 12
Firmware Issues and Restrictions 13
Storage Enclosure Issues and Restrictions 14
Hardware and Connection Details 15
iii
Intended Audience
This document is intended for customers who install, use, or troubleshoot the
KZPDC SmartArray 5300A controller product in Alpha systems. It describes
KZPDC product updates and known issues or restrictions when using the
controller within particular system configurations.
KZPDC Product Updates
This release announces several Smart Array 5300A product updates which are
documented more fully later in these notes. These updates include:
New controller firmware, version 3.40, is available for download from the
•
Smart Array controller for Alpha systems home page.
Updated versions of the Smart Array OpenVMS runtime utilities are available
•
which resolve prior incompatibilities between the version 3 OpenVMS
Management Agent kit and the Smart Array Configuration Utility.
Full support up to platform controller limits is now provided in the OpenVMS
•
Smart Array runtime utilities for KZPDC installations on ES47, ES80, and
GS1280 systems.
Introducing OpenVMS version 7.3-2 support for the KZPDC controller which
•
provides FastPath functionality for improved performance.
• New KZPDC Alpha system support
installations on the GS80, GS160, and GS320 platform.
for OpenVMS and Tru64 UNIX
KZPDC Product Components
Controller Firmware Support
Smart Array 5300A controller firmware version 3.40 is available as an update for
the KZPDC controller. Note that the KZPDC option kit presently ships with
version 2.94 firmware.
Controller firmware v3.40 is a recommended update for KZPDC controller
installations on all supported Alpha system platforms under OpenVMS or Tru64
UNIX.
The v3.40 firmware image may be obtained from the Smart Array 5300A product
web site or on the V6.6 Alpha Firmware CD in the OPTIONS subdirectory. Two
examples of the controller firmware update command syntax are presented below.
Both examples employ the Loadable Firmware Utility (LFU) function of the
Alpha SRM console.
The first example will update controller instance PYA0 with the v3.40 image after
booting the V6.6 Alpha Firmware CD in CD-ROM device DQA0 on any
supported Alpha system:
The second example employs the firmware image available on the Smart Array
5300A web site and assumes that the update media is a floppy disk in device
DVA0. After unpacking the .zip archive of the v3.40 firmware image place the file
onto a MS-DOS (FAT) formatted floppy disk. Place the disk into your Alpha
system floppy drive and execute the following command after entering the LFU.
Note that it is required to specify the .bin file extension of the firmware image.
The example updates KZPDC controller instance PYC0.
UPD> update pyc0 -p fat:kzpdc340.bin/dva0
Alpha System Firmware Support
It is recommended that all Alpha system environments hosting the KZPDC
product be updated using SRM firmware from the V6.6 (or later) Alpha Firmware
CD release. The V6.6 release firmware for Alpha systems is downloadable from
the following locations:
http://www.itrc.hp.com
http://ftp.digital.com/pub/DEC/Alpha/firmware/
Operating System Support
Smart Array 5300A controllers may be configured for operation under Tru64
UNIX version 5.1A or version 5.1B. OpenVMS support is available in versions
7.3-1 and 7.3-2 of the operating system. The product may be employed either as
the system boot controller or as a data only array controller in all supported OS
environments. Installation requirements vary, however, depending on the system
environment under consideration when the SA5300A product is first installed.